How to Close all Oracle services on Win XP?

While I was trying to install Dev/2k on Win XP, I got a message to close all Oracle services before I proceed with the installation. In Windows NT, I simply open Services folder from the control panel and shut down the desired srvice, but there is no such a thing on Win XP...
Any input would be helpful.
Thank you much in advance.

Go to Control Panel --> Administrative Tools --> Services and find all the service names starting with Oracle and right click to manually stop each one.

Similar Messages

How to remove Oracle Services from Win NT Services

I had oracle 8i(8.1.6) installed and then tried to upgrade to 9i (9.2) but it got messed up as database upgrade only works from 8.1.7 to 9 and not from 8.1.6. SO I uninstalled both 8i & 9i and want to install it again a fresh but before doing this I want to remove the oracle services in Win NT Services.
How can I do this?
Thanks

Here are a couple of links to instructions as to how you might uninstall Oracle:
From this forum:
Re: HTML DB 1.6
From elsewhere on the web:
http://www.cryer.co.uk/brian/oracle/howto_orcl_uio.htm
http://www.louisville.edu/it/twotier/oracleinstall/uninstall/
http://www.orafaq.com/msgboard/windows/messages/1144.htm
Good Luck

Removing Oracle Services from Win NT Services

I had oracle 8i(8.1.6) installed and then tried to upgrade to 9i (9.2) but it got messed up as database upgrade only works from 8.1.7 to 9 and not from 8.1.6. SO I uninstalled both 8i & 9i and want to install it again a fresh but before doing this I want to remove the oracle services in Win NT Services.
How can I do this?
Thanks

go to register, type regedit on run prompt
register will open. go to hkey_local_machine then
go to software and click oracle option
and then find service name,
and delete the service.
otherwise you may stop the service by control panel
before installation of software
regards.

How to close all session in OBPM 10gR3

Hi all,
I want to know how to close all sessions in engine.
Because if there is some sessions in engine,the Directory polling is not take effect.
(we can not restart engine.)
Best Regards,
Freeman

BPM Studio (10g) is just a plugin for eclipse. To install other plugins, just use the Help - Software Updates - Find and Install
HTH,
-Kevin

How to close all alerts?

Hello ,
when i open plug in and perform opration then alert window show. i want to close that alert on menu item click.how to close all alerts on button or menu item
click?can any body help me?

Double click the home button. Swipe up toward the top of the iPhone each icon that you see over an app icon.
When finished, single clock the home button.
This closes each application one at a time.
To close them all together, restore the iPhone.

Stop all Oracle Services

I am upgrading/patching my test 10g database. While upgrading it ask you stop all oracle services in order to continue the upgrade. I did that but it is still asking to stop all oracle services. Now what do I do, anybody have experience with that.

First, make sure you don't have any thing automatically started, and don't use even sqlplus, as a client it will load several dll's and when the upgrade process starts it will mark several dll's as being used.
I've been working with win2003 several upgrade processes, I don't know exactly why, but several dll's are still marked as being used, even if the host was restarted with the service set to manual start. The exact list of dlls that are in this situation correspond to those used by an oracle client.
The workaround I found for my specific case was to rename the dll's and let OUI to write the new version.

How can i config Oracle Services for Microsoft Transaction Server in 9.2

how can i config Oracle Services for Microsoft Transaction Server in 9.2

There's nothing to configure on the client side. On the database side you just need to run a script once to setup an ORAMTS admin account and some other infrastructure.

Cannot download application world- how to close all the browser windows

i cannot download the blackberry application world "sorry, your session has expired. Please close all of your browser windows and then return to the welcome page to start again." How to close all the browser windows?

Hello numadia
Welcome to BlackBerry Support Forums
Is your problem resolved or you're still having problem with download BlackBerry world !
If you're having problem then just peform a Battery pull restart by removing the battery while your device is Powered On, wait for a min. then reinsert it back after reboot please try it again.
If problem persists then you can also go through this Knowledge Base KB32113
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

How to close all applications at once in an iPhone ?

how to close all applications at once in an iPhone ?

Double click the home button. Swipe up toward the top of the iPhone each icon that you see over an app icon.
When finished, single clock the home button.
This closes each application one at a time.
To close them all together, restore the iPhone.

How to verify all the Services in Oracle R12 from Unix OS

Hi,
Can someone please through some details on how to check and verify the unix processes and services from Unix backend in R12. In 11i I was using
ps -ef|grep f60
ps -ef|grep httpd
ps -ef|grep FNDLIB
Currently , I am using './adopmnctl.sh status ' command to see if all the components are UP. But I need to see the conc manager, form/report server , apache etc and on which port they are running as OS Processes.
Thanks
-Samar

Hi Samar,
Processes in Instance: hostname_domain
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
OC4J | oafm | 29879 | Alive
OC4J | forms | 29801 | Alive
OC4J | oacore | 29726 | Alive
HTTP_Server | HTTP_Server | 29669 | AliveThe above indicates that all application processes (except the CM) is up and running. You may also refer to the log files to verify that.
I can also see the ps -ef|grep Apache but noting is comming as ps -ef|grep FNDLIB or ps -ef|grep frmweb or
ps -ef|grep rwrun. What about "ps -ef | grep -i fnd"? If CM is down (verify by issuing "adcmctl.sh status" or from the application (Administer CM window)), the ps command will not return any result.
For the forms server, does "ps -ef | grep -i frm" return something?
I am using the R12 on linux single node. I shudown and starting all the services with adstrall.sh and it exited with status 0 after bringing up all the components. Apache and DB listeners are UP. I cant opent the forms due to firewall and Virus Protection AD blockers.What is the error you get? Can you open the forms if the firewall and pop-up blockers are disabled?
How can I check if all the services are performing OK.The adopmnctl.sh command should be helpful here. In addition, review the log files (and try the commands in this reply) to verify the application components.
Regards,
Hussein

How to uninstall all oracle and get a clean install?

how can I uninstall all oracle files and get a clean install?
the installer does not let u delete the installer program and some other components.
i installed 8lite first then uninstalled as much as i could.
Then i installed 8.1.6 personal as oracle home 2 and it did not install properly.
Now i had 2 homes, so I uninstalled 8iPersonal and deleted all the folders from the C: drive.
How do i remove the registries without corrupting anything else?
Is there an easy way to remove Oracle?
Thanks

do the following:
stop all the oracle services:
delete the oracle folder..then go to regedt32
and look for HKEY_LOCAL_MACHINE
under softuser delete all the key related to oracle...and under services delete all the key related to oracle..
then restart you machine...and you should be
good to go..
Good Luck
Shah

RV042 - How to close all ports and leave some specific open

Hello everybody,
Here is the scenario of my network:
- A company with 20 branches in Rio de Janeiro area. The main servers are in a datacenter located in downtown.
Each branch has a RV042 router with firmware version 1.3.12.19-tm (Feb 13 2009 13:03:21) installed.
All users in this network have a proxy configuration pointing to proxy.[blah].com.br port 3128.
The HTTP/HTTPS traffic should go through proxy only.
The network settings for every RV042 are similar:
RV042 LAN IP = 172.16.***.1 /24.
RV042 WAN IP = 192.***.***.*** /30.
Network Setting Status
LAN IP: 172.16.***.1 /24
WAN1 IP: 192.168.***.*** /30
WAN2 IP: Not used
Mode: Router
DNS(WAN1): 208.67.220.220 / 208.67.222.222 [OpenDNS Service]
DNS(WAN2): Not used
Firewall Setting Status
SPI (Stateful Packet Inspection): On
DoS (Denial of Service): On
Block WAN Request: On
Firewall -> Access Rules Section: Please see below
The problem:
- Some "smart" users were caught using Ultrasurf application, which changes the proxy settings to go through port 9666 or even 443.
In other machines, we've found some black proxies [for example: 212.46.27.142 port 8080].
My objective:
- To close all ports in Firewall -> Access Rules section and grant permission only to some selected and specified ports.
- To redirect all HTTP/HTTPS connections to go to proxy's IP address only.
Gentlemen, could you please tell me which Access Rules can I set in these RV042s in order to block and prevent these users to continue abusing this network? Is there anything else am I missing?
P.S.: The users who were caught using Ultrasurf were fired. ;-)
I gladly appreciate your comments.
Thanks in advance,
Luciano

Hello Randy,
Thanks for your answer. But let me tell you better. In this scenario, all machines in LAN can use RDP and VNC normally.
I want to block everything else, just to avoid users to try using other ports.
You might want to try Deny all traffic out, except for the PC's you need to use RDP, and then only allow 80, and 443 to the proxy.[blah].com.br port 3128. This way all web traffic would have to pass through that proxy, otherwise it would be denied.
In this network, we use VNC to provide remote IT support to users in these branches.
They use RDP to access some servers in the datacenter.
I think that the rule below line 6 is letting users go and traverse the proxy.
Priority    Policy Name    Enable    Action    Service        Source Iface    Source    Destination        Time    Day
*                                                  Allow    All Traffic [1]             LAN     Any        Any                  Always
How can I modify this access rule? It seems it cannot be altered.
Thanks in advance,
Luciano

How do I install Oracle Service Bus?

Much thanks to anyone who can help! I have been a developer for 20 years and I have never had so much trouble with run a setup program.
I am trying to install Oracle Service Bus 11g on a Windows 7 machine. I have successfully installed WebLogic 10.3. The Oracle Service Bus installation program wants me to enter the paths for Oracle Middleware Home, Oracle Home Directory, Weblogic Server Location and OEPE Location. No matter what I enter for these I am told they are incorrect. For example:
Specified Weblogic home location is not a valid location.
Let's concentrate on just the Weblogic home location. I have tried every directory and sub-directory where Weblogic has been installed. No matter what path I enter, I get the error message above.
Setup defaults this path location to C:\bea_default\wlserver_10.3 so I tried copying everything to this path. Still I am told the location is not a valid location. How does anyone ever get this to work? What am I doing wrong?

Hi.
I have exactly the same problem than 786801. In the "Specify Installation Location" screen of the Oracle Service Bus installation process, after providing the correct paths, the message "INST-07248: Specified Weblogic home location is not a valid location" appears.
WebLogic Server 10.3.3 is installed in /opt/oracle/middleware
The folder wlserver_10.3 exists under that path, so I'm entering /opt/oracle/middleware/wlserver_10.3 as WebLogic Server Location.
In addition to the WebLogic Server, I have installed SOA Suite 11g without problems. The database schemas for that products have been created with the Repository Creation Utility.
I don't know what to do. Any help would be so much appreciated.
Here are some lines of the installation log, where the problem appears:
==============
[2010-10-22T12:44:20.148+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Setting valueOf(WL_HOME) to:/opt/oracle/middleware/wlserver_10.3. Value obtained from:USER
[2010-10-22T12:44:20.148+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Setting valueOf(WL_HOME) to:/opt/oracle/middleware/wlserver_10.3. Value obtained from:USER
[2010-10-22T12:44:20.148+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Inputs passed to the handler: [ WL_HOME ( homeLocation ) = "/opt/oracle/middleware/wlserver_10.3" ]
[2010-10-22T12:44:20.150+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Handler launch begin: weblogicQueries.isValidWeblogicHome
[2010-10-22T12:44:20.153+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Entering method executeHandler
[2010-10-22T12:44:20.153+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Fetching the value of homeLocation
[2010-10-22T12:44:20.153+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Error:Error in validating Weblogic home location
[2010-10-22T12:44:20.153+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Cause:Specified Weblogic home location is not a valid location
[2010-10-22T12:44:20.154+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Action:Enter a valid Weblogic home location
[2010-10-22T12:44:20.154+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Exiting method executeHandler
[2010-10-22T12:44:20.154+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Handler launch end: weblogicQueries.isValidWeblogicHome
[2010-10-22T12:44:20.154+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Handler returned status: FAILED
==============
It doesn't give much info, just that the path is invalid and the error type.
Any idea?
Thanks in advance.

How to publish all the services in sicf

Dear All ,
I have installed SRM 5.0 (ABAP+JAVA) .
I am new to SRM, please help me how to publich all the servers which are in ' sicf '
Also please let me know whether any exta steps need to do after SRM instalation.
Is there any specific SAP doc. for this ?
Thanks,
Srikanth.

Hi Muthu,
I executed the above report , got the out put as all the services are activated.
But when I tried to test the service sicf (bbpsc01 shopping cart).
I am getting the below error...
Error when processing your request
What has happened?
The URL http://gesrm.gecis.com:8000/sap/bc/gui/sap/its/bbpsc01 was not called due to an error.
Note
The following error text was processed in the system SRM : Attribute for user 703021396 contains errors. Inform system admin.
The error occurred on the application server gesrm_SRM_00 and in the work process 0 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
Form: OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
Form: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
Module: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SRM in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server gesrm_SRM_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server gesrm_SRM_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 400 -u: 703021396 -l: E -s: SRM -i: gesrm_SRM_00 -w: 0 -d: 20090202 -t: 024703 -v: ABORT_MESSAGE_STATE -e: Attribute for user 703021396 contains errors. Inform system admin.
HTTP 500 - Internal Server Error
Please help me in this.
Thanks,
Srikanth.

How to close all tabs XP/FF6

How do I close all tabs without existing FF6? I can close every tab except the final tab that is opened.

Set the pref browser.tabs.closeWindowWithLastTab to false on the about:config page to prevent closing the last tab from closing the browser and make a close button appear if only one tab is open.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu.

How to Close all Oracle services on Win XP?

Similar Messages

Maybe you are looking for