How to close ExportPDF side-panel in Reader XI
I can't figure out how to close the "ExportPDF" side panel in Reader XI. Such a simple thing, but not obvious.
Close or open this panel with the TOOLS button above it.
Similar Messages
-
*Help, can't figure out how to reopen closed side panels!!!
I closed the "layer" side panel and can't figure out how to reopen it. Pleaes help, I have CS3.
I also find it useful to do a Workspace Save, when I have things setup as I like. You can access it from the same drop-down on the Toolbar, Window>Workspace>Save_As. I have a half-dozen custom Workspaces, that I use. This can be a real time-saver, when Panels get closed, moved off-screen, or similar.
In versions prior to CS4, the Workspace is saved with the Project. Do not know if that has changed.
Good luck,
Hunt -
How to close a front panel using 'one button dialog'?
I wish i could use a 'one button dialog' so that the user can close the front panel when asked.
actually, i do put a 'open vi reference' followed by an 'invoke node' and then by a 'close reference' in a case true false (vi attached)
it seems that i can'ty use the option 'close FP' in my invoke node.
I am using a labview 6i version, is that possible to have this option, otherwise hoe can i achieve muy application without this invoke node??
thanks
guillaume
Attachments:
testfermeture.vi 18 KBtry this.
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
IFK_VIServer_Example.vi 32 KB -
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
Anyone understand this strange LR3 side panel behaviour?
In the last couple of days my laptop has developed a piece of strange behaviour related to the side panels. I'm pretty sure it didn't start when I installed the LR3.5 update, but this may have been a contributing factor.
Until recently I always worked in "solo" mode. A couple of days ago, LR's behaviour changed so that opening or closing any of the side panels would cause the relevant side (left or right) to become totally unresponsive. The rest of the program continued to work fine, and the equivalent side panel in other modules continued to work properly until a panel was opened or closed.
In an attempt to understand what was going on, I turned "solo" mode off. This led to some very interesting behaviour indeed:
If I used the triangle to open or close a side panel, everything worked exactly as expected.
If I clicked on the dark grey bar to open or close a side panel, it became stuck in one of the two states.
When stuck in "open" state, clicking in the grey area simply caused the panel to close and then re-open, very rapidly.
When stuck in "closed" state, something similar happened in that the panel opened and then re-closed, very rapidly.
When in "stuck" state, clicking on the triangle had no effect on the displayed panel but it seemed to toggle the internal state between opened and closed.
Once toggled, clicking on the grey bar opened the panel where it used to close it, and vice versa.
When collapsed, the panel displays as pale grey rather than the more usual dark grey. See below for an illustration.
I have a desktop machine as well which doesn't show the behaviour. I've tried reinstalling LR3.5, to no avail. My guess is that we're dealing with inconsistent panel state information in the "preferences" file, but I don't know for sure.
If anyone knows what is happening, or (more importantly) how to stop it happening, I'd be enormously grateful for some help.
Many thanks in advance,
Ian Wilson
Cambridge UKFurther investigation yielded yet more interesting behaviour - and, it turns out, a pointer to the problem.
I tried renaming the old "preferences" file, causing LR to create a new one. The problem was unchanged, apart from losing my registration information...
I tried creating a new, virgin catalogue. This behaved normally, so I thought I was onto something!
I tried importing a folder of pictures into the new catalogue. The old behaviour returned.
I created a new virgin catalogue, which reverted to good behaviour. I then imported one picture into the catalogue. Behaviour BAD.
I then tried removing the single picture from the catalogue and restarted LR. Behaviour GOOD!
Conclusion: Lightroom works just fine for me providing I never put any pictures into my catalogue!!
This got me thinking that, perhaps, the issue was related to the rendering of images. I tried installing the latest nVidia drivers for my laptop, but this had no effect whatsoever. Given the issue clearly related to how images are rendered, however, I wondered whether the problem could relate to colour profiles. BINGO!! I'd recently upgraded my "i1xtreme" to X-Rite's new "i1publish". The profiles created with the latest software are ".icm" rather than ".icc", although this shouldn't matter (and doesn't matter to PS and Bridge). It seems to matter to LR, however, as reverting to my earlier ".icc" profiles made everything work again just fine.
There is obviously a bug somewhere, but it's not clear whether I should be chasing Adobe or X-Rite. I'd welcome any comments or advice...
Many thanks for the suggestions,
Ian. -
SAP Standard Side Panels don't show any data?
Hiya,
I'm using NWBC 4 (patch 12) on SAP 7.31 (Ehp 6, SP10) and I can't get any of the SAP delivered Side panels to show any data.
This is typical of what I see, the side panel appears but all the data fields are empty:
The charts don't work either(?) and show nothing...
The only part of a side panel that I managed to get to works was in transaction VA03 and it was the chip to show 'company code' data - but that's not going to impress the business when I demonstrate this functionality to show them how great NWBC with side panels is...
Is there something obvious that I'm doing wrong do you think or has anyone else encountered this kind of problem?
Thanks!Robert
My 2 cents ...Either your basis team did not activate the parameter necessary for Side Panel or you have NOT perform the necessary Tagging (aka Wiring).
For the former (parameter), check the parameters setup as explain in the help file below.
http://help.sap.com/saphelp_nw73ehp1/helpdata/en/4c/5bdb8497817511e10000000a42189b/content.htm?frameset=/en/4c/5bdae497817511e10000000a42189b/frameset.htm
If this the is later (i.e. Tagging\Wiring)... That meant that the info from your SAPGUI main screen, has NOT been setup to pass the info to your side panel chip. Some of the standard SAP delivered Side Panel CHIP does requires you to perform your own tagging; and there's a security requirements. So before you start this ... Make sure that you have confirm the parameter had been setup correctly (section above); and you have as much of a security rights as possible.
Using Pages in the NWBC Side Panel - Creating Mashups with the Page Builder - SAP Library
HTH ... -
Hello. Question to anyone who might know.. was wondering how much a new side panel for a quad G5 would run from apple. I have seen them on the "diy" parts section on this site. My baby daughter had a feild day on the side of my quad with a permanent marker. Luckily the side where the panel comes off. Gotta love kids. Partially my fault, however, one of those things to nearly drive you insane on a unit this expensive. Thank you for your time.
-TomLeave the panel off and light her up! That ought to give the kid a few more ideas!
http://68.178.141.188/photogallery/10/10.html
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
An Apple User Group
MacOSG Podcast >> -
How to define Side Panels for linked to Child Window Applications
We are trying to use the NWBC Side Panel with PPM 6.0 in NWBC 3.5. We have a Role that has a menu defined that gives the users a link to the INM_WORKCENTER_APP which displays the current user's Tasks in a table.
When we click on a task in the table it opens the task details using the CPROJECTS_FPM application in a new window. This new window that opens up doesn't have any of the Side Panels that we have defined on the role with the main menu links.
We have tried to add the side panel using different application alias and at different levels in the Role, but can't get a Side Panel to show up on the child window. We even tried to switch the window to open INPLACE in the main window and it still switches to no side panels. The only side panels we are able to see is side panels that the user has manually added under connections and the Data Context Viewer side panels.
Is NWBC capable of having side panels to be defined to be available for these linked to child applications that are called from a main application screen? If so, what is the possible configurations we need to make on the role for this to work properly?
Thanks in advance for any help!Wanted to close this thread with the solution that worked for us.
We had to change the Launchpad configuration for Role CPROJECTS Instance OIF. We changed the Application from a Web Dynpro ABAP type to Object Based Navigation. Set the Application Parameters Business Object to PROJECT and Operation to DISPLAY.
Then for our role defined in PFGC for our NWBC, we added a new menu item to the Web Dynpro application CPROJECTS_FPM with Configuration CPROJECTS_FPM. Then under Object Based Navigation we set the Object Type to PROJECT and Method to DISPLAY to match what we set above in the Launchpad. Then set the menu item to be invisible since we didn't want it to show to users.
Now when we launch the child window it uses OBN and sees the definition in our role and utilizes the same Side Panel definitions defined for the role. -
How can you minimize or (turn) off the "side panel" in Web Intelligence in the view mode.
How can you minimize or (turn) off the "side panel" in Web Intelligence in the view mode.
It is possible to turn on/off options within the Side Panel by Customization of Groups.
But it seems You cannot influence the way Web Intelligence present (minimized or Off) the Side Panel in the IE??
Is there a solution for this??
If not, it would be a nice property of a Web Intelligence document in a future release.Hi Nico,
we patched up to BI 4.1 SP 3 Patch 2
and look look
click side panel to minimize
so .. patch patch ... -
How can I get the picture to show in Photoshop CS3? The thumbnail image appears in the right side panel but the full image isn't showing at all.
What specific information would you need? The program was working just fine early yesterday morning and than when I came back in the afternoon to edit some more pictures that is when I wasn't able to see the full image anymore. It is providing me with all of the editing options as if the picture is there but it is just a blank screen with the thumbnail pic showing in the right panel.
-
Adobe Reader XI, how do I remove the panel on the far right for Tools, Fill & Sign, Comment?
How do I remove this panel on the far right of the screen? It takes up too much space when I move the Adobe window to only the left or right side of my screen. Can it be shrunk like Bookmarks, Attachments and Thumbnails?
Thanks ~graffiti. That got me halfway there. I only want the tool bars on the right to go away. I like the toolbars on the top.
I found if I "Hide Toolbars" and then "Show Toolbars", the Tools Fill & Sign Comment toolbar comes back minimized. The shortcut key is F8. I will have to remember the shortcut so I may rapidly turn off and then show the toolbars. -
How do I add a favourites side panel?
In Internet Explorer, I could build a directory (with folders and individual entries) of my favourite web links and have it as a side panel. How do I do this in Firefox?
You're very welcome.
-
JSplitPane: how can I close one side of the jsplitpane?
Hi!
I have a jsplitpane component on my frame. I want to close one side of the jsplitpane when my program loads. And after some time I want to open it back..
Do you happen to know how can I do that?Either you have not read the complete thread or you have not followed instructions correctly. Instead of adding HierarchyListener on JSpliPane, you are playing with divider before realization of split pane on screen.
Here is modified code [This works 100%]:
import java.awt.*;
import java.awt.event.HierarchyEvent;
import java.awt.event.HierarchyListener;
import javax.swing.*;
import javax.swing.plaf.basic.*;
public class MySplit {
private static void createAndShowGUI() {
JFrame frame = new JFrame();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
final JSplitPane splitPane = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT,
new JButton("first"),
new JButton("second"));
splitPane.setOneTouchExpandable(true);
splitPane.setDividerLocation(150);
splitPane.setPreferredSize(new Dimension(400, 400));
splitPane.addHierarchyListener(new HierarchyListener() {
public void hierarchyChanged(HierarchyEvent e) {
if ((e.getChangeFlags() & HierarchyEvent.SHOWING_CHANGED) != 0) {
BasicSplitPaneUI ui = (BasicSplitPaneUI) splitPane.getUI();
BasicSplitPaneDivider divider = ui.getDivider();
JButton button = (JButton) divider.getComponent(1);
button.doClick();
BasicSplitPaneUI ui = (BasicSplitPaneUI) splitPane.getUI();
BasicSplitPaneDivider divider = ui.getDivider();
JButton button = (JButton) divider.getComponent(1);
button.doClick();*/
frame.getContentPane().add(splitPane);
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
}Thanks,
Mrityunjoy -
How to close sidebar under ios 8 in order to use the whole screen for reading?
How to close sidebar under ios 8 so that i can have the full screen for reading?
Sidebar where?
In Safari?Tap on the Blue open book icon at the very top of the screen. There are two such icons, it is the one on top you want to tap to close the sidebar. -
Can someone tell me how to get my side tool panel back?
I'm hoping someone can tell me how to get my side tool panel back. I'm using adobe elements 10.0. Everything was fine, then all of a sudden the side tool panel disappeared and my whole screen is covered with adobe elements workspace.
Hope you can helpoh! yes ,
It should be Shift + Ctrl + ALT on windows
and Shift + Command + Option on Mac
Maybe you are looking for
-
Video Chat over Dial-up Connection
Hi, Is it possible to have a video chat over a dial-up connection? If it is, I'm interested to hear what is the experience like from anyone who has tried it. Is it acceptable? How about having 3 person AV conference, and one connection is dial-up? I'
-
Hi, Can any one tell me how to create a button widget, I've created one & it can be seen in my plugin, but it doesn't work, in .fr file i created the widget as, ButtonWidget kEXTCODGoButtonWidgetID, kSysButtonPMRsrcId,
-
Trying to recover damaged PSD file for Photoshop Cs6
WeTransfer Click the above link to download it. I would appreciate it. I get an error message about it being damaged.
-
HP pavilion dv6-3143cl notebook pc running windows 7 home premium. How do I empty recovery disk D?
Is there a tutorial on how to do this anywhere?
-
Search Scope that Only Returns Sites
I'd like to create a search scope that only returns Sites. I don't want any documents, lists, items, or anything else in my results. How would I do this?Murray