How to close port 3795 Myblast

Network Utility Port Scan shows tcp port 3795 open.
Apple does not list this port in Sharing <- Preferences,
but Google scan turned up 'Myblast' as the registered
name for this tcp port.
I do not know what Myblast is, but I do not think
I want it. How do I close this port?
Is there any vulnerability my system is exposed to
while this port is open?
Thanks for any help.

Do you play any kind of games on your computer?

Similar Messages

E4200 How to close port 139 ?

So finally that my e4200 is capable of disabling wps i run in to another question.
how to close ports 139 445 ?
these are open by default and i didnt figure out how to close them, in browser setup..
and YES port 139 IS a security issue. people denying this, are the same, that denied any vulnearibilties to wps.

Well, in the router set up we can only open the port for any specific application. But there is no way in the router management page where we can close any specific ports for specific purpose.

How to close port 32773 in solaris 9

Hi
Need your kindly assistance to close port on solaris 9.
Have done the rpcinof -p but can't found the port 32773 showing.According to my research, 32773 port is for rpc services.
root@mcisdev # rpcinfo -p
program vers proto port service
100000 4 tcp 111 rpcbind
100000 3 tcp 111 rpcbind
100000 2 tcp 111 rpcbind
100000 4 udp 111 rpcbind
100000 3 udp 111 rpcbind
100000 2 udp 111 rpcbind
100232 10 udp 32779 sadmind
100229 1 tcp 32775 metad
100229 2 tcp 32775 metad
100230 1 tcp 32776 metamhd
100422 1 tcp 32777
100068 2 udp 32780
100068 3 udp 32780
100068 4 udp 32780
100068 5 udp 32780
100011 1 udp 32781 rquotad
100001 2 udp 32782 rstatd
100001 3 udp 32782 rstatd
100001 4 udp 32782 rstatd
100002 2 udp 32783 rusersd
100002 3 udp 32783 rusersd
100002 2 tcp 32778 rusersd
100002 3 tcp 32778 rusersd
100008 1 udp 32784 walld
100012 1 udp 32785 sprayd
100024 1 udp 32786 status
100024 1 tcp 32779 status
100133 1 udp 32786
100133 1 tcp 32779
100021 1 udp 4045 nlockmgr
100021 2 udp 4045 nlockmgr
100021 3 udp 4045 nlockmgr
100021 4 udp 4045 nlockmgr
1289637086 5 tcp 32799
1289637086 1 tcp 32799
300598 1 udp 32813
300598 1 tcp 32827
805306368 1 udp 32813
805306368 1 tcp 32827
100249 1 udp 32814
100249 1 tcp 32828
Have done netstat -a | grep 32773
root@mcisdev # netstat -a | grep -i 32773
*.32773 Idle
*.32773 *.* 0 0 49152 0 LISTEN
Since we don't know the port is tie to which program or services thus we cant comment out anything in /etc/inetd.conf.
Have do more /etc/services and the port not showing inside this file as well.
Kindly assist on how to close the port for tcp 32773.
Your assistance is highly appreciate.
Thanks
Regards
Chew Chen Lai

I am pretty sure rpc is a standalone daemon, and not managed by inetd. Instead check /etc/init.d/ and /etc/rc*** scripts.
There may be some services that require rpc- nfs probably requires it (NFS v4 with kerberos authentication might not.) The idmap daemon used by nfs may also require this (not sure of the exact daemon name..)

How to close ports 139, 8290, and 10002

Is there anyway to close ports 139, 8290 and 10002 off a networked HP 2820? I work at a university and my department has been asked to closethese ports. is there any way to close these ports and still continue to print on both Mac and Windows platforms?
thanks for any advice.

Well, in the router set up we can only open the port for any specific application. But there is no way in the router management page where we can close any specific ports for specific purpose.

WRT320N - How to close ports

Certain ports I will hardly or ever use like: SMTP 25, telnet 23, SNMP 161, etc
I want to make my network more secure by closing some ports, but how is this done?
The manual says nothing about such feature.
Thank you.

I agree with GV. by default only port no 80 is open on your Router and all other ports are closed.

How to close the COM Port ??????????

Dear all :
I have written an application that send AT commands to a modem , Once I opened a com port , i don't know how to close it . I got the null pointer exception when i create a new channel , because the inputStream and outputStream is owned by the previous channel . So , some one can teach me how to close the com port that opened before ?
my source code for open port :
public void Connect_Com(CommPortIdentifier portId) {
Integer i = new Integer((int) (Math.random()* 1000));
String channel = "channel" + i.toString();
System.out.println(channel);
try {
System.out.println("preparing to open port");
serialPort = (SerialPort) portId.open(channel, 2000);
} catch (PortInUseException e) {}
try {
inputStream = serialPort.getInputStream();
System.out.println("getting inputStream");
} catch (IOException e) {}
try {
serialPort.addEventListener(this);
} catch (TooManyListenersException e) {}
serialPort.notifyOnDataAvailable(true);
try {
serialPort.setSerialPortParams(9600,
SerialPort.DATABITS_8,
SerialPort.STOPBITS_1,
SerialPort.PARITY_NONE);
} catch (UnsupportedCommOperationException e) {}

serialPort.close() ?
From the documentation of SerialPort:
- SerialPort extends CommPort.
- CommPort.close() closes the communications port.

Open ports slow down my internet connection. How to close them? What to do?

My MacBook Pro has massive problems with internet connectivity. At times the connection is blazingly fast, at times unbelievably slow.
I've spoken to my internet provider who was able to inform me that my computer opens up 500-700 ports which is probably what's slowing down the network connectivity. When I'm online with the MacBook Pro, the web gets unstable – also for other connected devices like iPad etc.
The web supporter asked me to run an anti-virus scan which I did – with no results. The problem persists. When my MacBook Pro is not online, there are approximately 15 ports open, when I log on the web that number increases to between 500 and 700.
Is this normal?
Can anyone tell me how to solve this issue?
How do I figure out which application opens these ports? (and how to close them?)
I tried logging into another user account on the computer and the problem seemed to disappear, indicating that it is caused by something run only on my user account.
Hope someone can help me..

Open ports don't slow down your computer. The tech support person you spoke to doesn't know what they are talking about.
Basically, when you are using a web browser, opening a page means that the browser needs to open a connection for each element in the page (e.g., it needs to grab each picture, CSS, and JavaScript file that the page requires). This could be a couple of dozen, or it could be hundreds (and there's no telling what Flash content on the page will do). The browser tries to mitigate things a bit using a cache (you might check to make sure the cache is turned on, but this is the default setting). However, this is how all browsers work and how the whole system is designed to operate. You cannot "close" any ports, and they don't linger open, they remain open only as long as data is being transferred. This is expected and appropriate behavior.
The most likely culprit is that you are receiving poor DNS service from your service provider. Every time the computer sees an address like 'http://www.google.com', it needs to send out a request to figure out what numerical address goes with the human-readable name. If the DNS service your system is assigned to use doesn't respond lightning-quick, your experience is going to be very sluggish.
You might want to add an external DNS service to your list of DNS providers. Go to System Preferences > Network, select the network you are using on the left (Ethernet or AirPort), and click the 'Advanced' button. Click on the 'DNS' tab, then press the '+' button under the left panel. I would add the OpenDNS.com DNS servers. Add the following DNS addresses:
{quote}
208.67.222.222
208.67.220.220
{quote}
Click the 'OK' button. And then the 'Apply' button to save the changes.
That will probably fix the problem. If it doesn't the next most likely issue is either network congestion (e.g., your ISP's network is just too busy; a very common thing for small ISPs and cable Internet service), or the remote site that you are trying to contact is simply not performing so well.

How to manage port open/close on MacMini server

Dear all,
In order to secure my server, I discover than some port are open.
Is there a way to close all port and open only 445 and 548.
I would like to make sure that no body can access the server from outside of the society ecepted if the have VPN client configured.
The collaborator should be able to connect the server via afp, but form out side they need to use VPN.
Then I am looking for a way to manage port on macmini server
Many thank for your help
Cheers

Hi,
I finally heart that port can not be closed on the router because I am usinf 1:1NAT.
How can close all port on my Macmini and open only the port ssh. I will not use VPN.?
If I turn on the firewall with the option to close all protocole. Is there a command to open a selected port?
If there is only the port 22 (SSH) how can I mount a remote folder with afp or with somethin else? I also have on PC over the 7 iMac.
Many thank for your help
Cheers

How to close FPGA reference out from different while loop

Hi Friends,
I`ve different while loop which performs the FPGA read port on different loops I`ve the FPGA out on every terminal at the end of the while loop. I`ve just connected the merge error function in which all the error out of the FPGA are combined and given to simple error handler. How to close the FPGA Reference.

Can you attach your VI? I'm not clear on what you mean. Are you saying that you are using the FPGA reference which is passed into multiple loops, and then continuing the reference wire to pass the ref out of each of the multiple loops?
If that is the case, I don't believe you can't merge references like you can error clusters. You will just need to wire one of the reference to the close FPGA VI. Additionally though, I'd recommend that you use your error clusters in some manner to ensure data flow so that all the other loops stop first, and you are sure you are closing the reference after all the other loops are done with the ref.

How to close Mobile Mouse Server?

I was doing an update on the App Mobile Mouse Server and when it weas ready to install it indicated I needed to close the App before it could install the update. The app is not in the dock and I don't know how to close it. Help Please!!!

Hi,
In the field for local server you just type in the local dns name for your calendar server, mail server etc... Also select which port you want publish externally and the the correct port your service is actually using on your lan (Selected under advanced tab). Make sure your mobile access server can resolv your hostnames correctly. It should point to an local ip. If an nslookup shows your public ip, you have to correct your local dns server (This is often called split dns configuration.)
To access this from outside your LAN you have setup NAT and permit the port you have configure your mobile access server to be the incomming port. How exactly you do that on the airport I am not sure, but I am sure it is explained in the user manual for the airport.
I found this video about the mobile access server on youtube: http://www.youtube.com/watch?v=_VRgl2bncZU
Hope this helps.
Bernt

SG300-20 Close Port (ALC)

SG300-20 to close out open ports as necessary.
I made it to the client, but I do not see it.
Freebsd machine is a distributed DHCP Athen is not at all.
I do not know how to open ports.
20 FTP Data.
21 FTP.
22 SSH.
25 SMTP.
43 Whois.
53 DNS.
80 HTTP.
110 POP3.
115 SFTP.
123 NTP.
143 IMAP.
161 SNMP.
443 HTTP (SSL).
554 RTSP.
993 IMAP (SSL).
995 POP3 (SSL).
1080 SOCKS.
1433 MSSQL.
2049 NFS.
3128 Squid.
3306 MySQL.
8080 HTTP Proxy.
But it does not work.

Hi Tom
Thanks for the reply yeah it did sound a stupid request for help as the out of box config just seemed to work, but its more of a Guidance and best practice thing for this type of setup if you had any words of wisdom that would be great.
there also was a symptom reported a few times, we had installed this a few months ago and all was well no proplems reported, then they loss communication with the switch and could not see any on the devices connected.
Now the switch never reverted back to its orginal config or anything like that, the System led on the SG300 was not flashing so the Static ip address was still set, but no communication with the switch either by GUI or Telnet (it was enabled).
after a factory reset it picked up an DHCP address from the RV180, then i changed it back to it assigned address as per my design, saved config, copied Running config to Startup config, reboot and all was fine.
a week passed and the client called again same thing, no devices could see each other and i could not communicate with the SG300.
its on our test bench just now and has been working with a light work load and is still fine, firmware is at the latest for the SG300.
Many thanks for any help

How to close down SRM POs

Hi,
How we close down SRM POs against ERP POs is there a different process we should be following?
what reports are available?
what is the SAP best practice?
Any help would be appreciated.
John

My advice re the tests.
Unplug the network cable.
I liked that idea at first. It definitely keeps one
from cheating by using the network. But then I had a
crazy idea - wouldn't it also keep one from taking the
online test?
Well, yes, I wondered about the online bit too, but people use terms in strange ways, and the idea of blocking ports seems inconsistent with the idea of a user taking the test being remote from the server that's supporting the test.
System.out.println("Do you have a second PC that you will use for cheating?"):
String ans = new BufferedReader(
    new InputStreamReader(System.in)
).readLine();
if(ans.equals("Yes"))
    System.out.println("You are not allowed to take this test.");
    System.exit(1);

How to find port number , when there will be different instance number ?

In case of portal url,
port number is 50000 for default instance number 00.
how to find port number , when there will be different instance number , instead of 00?
Thanks

Hi
You can find the port number by your instance number as follows:
There is a general format for the port number like you have mentioned.
For 00 instance the port number is 50000.
The general format for the port number goes like this:
5<instance_no>00
If your instance number is 01 then the port number would be 50100.
It depends on the installation type which you perform.
You can also change the instance number during the installation but normally you dont do this.
If you have many components or units installed on your system you may have more than one instance in that case it may go like this 00, 01, 02....accordingly port number will be 50000, 50100, 50200...resp.
Hope this solves your doubt.
If you need some more clarification please lemme know.
Regards
Sumit Jain
**Rewrd with points if useful.

How to close extended classic PO in ECC...

Hi Friends...
We are in SRM 7.02 and ECC 6.05 in Extended Classic Scenario. One PO had been created for 1 Quantity 3 years ago. There was no GR/IR document posted against that PO. Now that PO had been archieved from SRM. But still PO is available in ECC with open quantity and also its appearing in the open PO report. Now requester wanted, the PO to be closed in ECC and shouldnot appear in the open PO list.
How to handle this situation.. How to close the extended classic PO in ECC at this scenario. As PO not available in SRM, we can not do anything from SRM side.
Your inputs are appreciated....
Regards
Sivakumar Kandasamy

Hi Sivakumar,
If you mean how to archive PO in MM side, please refer to the following info:
====
In ECC system, if you want to archive a MM PO, please use transaction
SARA->archive object MM_EKKO.
456129 FAQ: Archiving in purchasing
401318 Archiving: Additional information
====
If you want to delete this ECC PO, please use BAPI_PO_CHANGE and
refer to the following test data:
Parameters:    PURCHASEORDER      = XXXXXXXXX
Parameters:    POITEM
PO_ITEM                        = 00010
DELETE_IND                     = X
Parameters:    POITEMX
PO_ITEM                        = 00010
PO_ITEMX                       = X
DELETE_IND                     = X
You also need to run BAPI_TRANSACTION_COMMIT after BAPI_PO_CHANGE for updating the change.
Regards,
Ivy

After the update I don't know how to close running apps? I recall double clicking the main button then hold one app until they begin a jiggling motion. But that no longer works.

How do close running apps?

You still double tap the home button and the apps are lined up across the screen. Swipe up on the app preview thumbnail - drag it up off of the screen - and that will close the app.

How to close port 3795 Myblast

Similar Messages

Maybe you are looking for