How to close/process a life event automatically
Hi,
I am looking for a solution that can process "termination" life event automatically so there is no need of manual intervention.
Just like there is a close enrollment process for Annual enrollment, can we setup something on similar lines and schedule a process that will take care of events like "termination" as well?
Thanks for your suggestions!!
Participation Process : Life Event will do it for you. It works for all life events including termination. If you want to schedule it specifically for terminated employees, choose the person type for ex-employees.
Regards,
Vinayaka
Similar Messages
-
How to find Process chain for event and parameter
Hi,
I have Event and parameter for the process, I wanted to know the which process chain does that process belons to.
Is there any table where I can see those.Hi,
Try these tables.
RSEVENTCHAIN Event Chain Processing Event Table
RSEVENTHEAD Header for the event chain
RSEVENTHEADT Header for the event chain
RSPCCHAIN Process chain details
RSPCCHAINATTR Attributes for a Process Chain
RSPCCHAINEVENTS Multiple Events with Process Chains
RSPCCHAINT Texts for Chain
RSPCCOMMANDLOG System Command Execution Logs (Process Chains)
RSPCLOGCHAIN Cross-Table Log ID / Chain ID
RSPCLOGS Application Logs for the Process Chains
RSPCPROCESSLOG Logs for the Chain Runs
RSPCRUNVARIABLES Variables for Process Chains for Runtime
RSPC_MONITOR Monitor individual process chains
Hope this helps.
Thanks,
JituK -
Life Events Not Processed in Self Service
Hello All,
When the New Life Events are in Detected Status and you try to enroll the employee through self service , self service does not show the life event for enrolling.
After processing the life event from PUI , if I go to self service , then it allows me to enroll in to Benefits.
Any reasons why it would not process the Life Event In Self Service when its in Detected Status.
Regards,
AHi
What is the Life Event Occured Date ?
Thanks
Gaurav -
How to Close Adobe Pdf Runtime
Hi,
I am using the Adobe PDF Runtime to Print the *10g Report* Directly to Printer.
It's Is Working Fine. But After giving Print Option , The Adobe Runtime Still Running. Manually we need to Close that runtime window,
then only the control come back to Forms.
Can Any one tel me how to Close Adobe PDF Runtime window Automatically, When i give print report Directly to Printer.
Regards,
Gany
Edited by: Gany - Ford on Sep 28, 2010 2:03 PMThe easiest way is to set up syncing between your iPad and laptop with iTunes. You can read how on the Apple website in the iPad section, or you can answer a question on their forums: www.apple.com.
It's a really good idea to set up iTunes syncing so you can back up all the files on your iPad!
On a one-by-one basis you could email a PDF, or use Dropbox, but synching is much better.
Good luck! -
How to close the window openned by System Exec VI automatica​lly?
Hello,
I am using System Exec VI to lauch an exe file built from a LabVIEW program. When running System Exec VI, the window of exe file pop out and stays there even after all tasks are completed. I have to close it every time manually. Anyone here know how to close the exe file window automatically when it's done?
Thanks,
Jean
Message Edited by Jean_CLD on 03-25-2010 11:25 AM
Message Edited by Jean_CLD on 03-25-2010 11:29 AM
Solved!
Go to Solution.If I understand the question correctly you need to add an invoke node at the end of your application to exit. Depending on the whether it is running as a stand alone application or within LabVIEW it will either exit or stop execution. I've attached the VI I use in my applications.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot
Attachments:
Exit application.vi 13 KB -
HRMS Advanced Benefits, Create Potential Life Event for Current Life Event
Hi,
While converting historical benefit information to Advanced Benefits module there is a step to Create Potential Life Event of Current Life Event.
Per my understanding a Life Event is Change in marital status to add spouse or having a child for benefits. What is Potential Life Event?
Thanks,In advanced benefits all the data is stored on person in life event basis (BEN_PER_IN_LER) which is a combination of person and life event.
So when ever any event occur in a person life it is trigger as a potential life event. After successful processing of life event life event data moves to person in life event which will further has transaction data attached to the life event like enrollments, rates, beneficiaries or depenedents.
e.g like a person hires and add dependent at the same time there will be two life events "New Hire" and "Add Dependent". These are both potential life events. Once you run the participation process or run the life events only one might be processed (the way you set ur collapsing rules).
I hope it clears some doubts. Drop a comment if you have some questions -
Error While processing the COBRA qualified Life event
Hi All,
We have setup the Termination Life event as a COBRA qualifying life event.
Also setup the a new monthly payroll as the default payroll and set the benefit assignment to Yes at BG level.
I created an employee on 18 aug 2010 , processed new hire life event and enrolled that employee into the COBRA plan named "Be well Medical Plan".
Then When I terminated the employee as on 18oct2010, While Processing The Termination life event, I am getting an Error saying “When determining pay periods, a payroll Id is required. This error has occurred in the following package : ben_distribute_rates.get_periods_between. "
When I searched for this error in metalink ,it says it does not have a payroll id ,but when I check on 19oct2010 using the People->Total Comp Participation->Person Benefits Assignment window, he has got the default payroll attached to his benefits assignment.
Could you please help me to reslove this issue?
Your help is greatly appreciated.
Thank you,
AnuradhaHi Anuradha,
This error comes in many scenarios and there are bug fixes also for them. Please check on all patches available for you apps patchset level having the file benelmen.pkb. You may find a fix for it. (This was a common issue sometime back with suspended/terminated assignments) Also, I suggest logging a SR with oracle asap if your terminated assignment and also the benefits assignment have the correct payrolls attached.
Regards,
Vinayaka -
IPhoto is creating events automatically when I import photos and when I merge events and then go to finder>all images, I see iphoto has created several copies of each picture....I try to delete the extra copies but then the albums or events also get affected, even if there is one copy of each photo left in all images...have someone had this problem?
You don't have a problem at all.
IPhoto is creating events automatically when I import photos
This is how iPhoto works. Every photo is in an Event. Events are the basic organisation of the Library. Every import means at least one new Event. Yes you can merge Events after import and so on, but there is at least one Event created at each import.
I see iphoto has created several copies of each picture....
No it hasn't. It hs created versions of the photos, not copies. There will be a couple of thumbnails for viewing in the iPhoto Window plus the Master and then a edited version for pics that are modified. The icons for each of these may be similar but they are not copies - for a start they are different sizes - and all are required for iPhoto to work.
go to finder>all images
Don't. This is simply a list of all the images on your computer. It makes no account or allowance for the purpose of these images. Really, if you're using iPhoto ignore this because if you
I try to delete the extra copies
Then you are trashing your Library.
So, this is how iPhoto works, there is no problem and stay away from All Images.
Regards
TD -
How to close a popup window for system events?
Hi,
I have a screen 110 which shows several input field in popup mode.
The Cancel button can close the screen.
But my question is how to close the popup window for the following system events?
1, Customer clicks the cross button in top-right corner
2, Customer clicks the system icon in top-left corner and then select either: "Close" or "Stop Session"
The PAI subroutine of the screen has not been triggered for the above system events.
Thanks for the coming help.
Best Regards,
DavidHi Siddharth,
I did check with another very experienced ABAP developer.
The solution was the same as what Arunima Rudra provided.
And I got a sample program which did work properly.
The headache is that the system events in my program still cannot be triggered even after I have all the same changes.
Anyway, I suggest you to try the solution as provided by Arunima Rudra.
It should work for 2 system events:
1, Customer clicks the cross button in top-right corner
2, Customer clicks the system icon in top-left corner and then select either: "Close"
For "Stop Session", it should not be handled by popup.
You can observe the same behavior in ALV sorting configuration popup.
Good luck!
Regards,
David -
How to creat Process messages automatically through PI sheet saved?
How to creat Process messages automatically through PI sheet to the Process message destinations.
Hi Jessie,
When you process instruction category PROD_3 in master recipe, the process message PI_PROD is created.
After releasing process order, you have to create control recipe. Upon successful creation of control recipe, process instructions will get generated. Check the error log for control recipe creation for error if any.
Note that control recipe will be generated only with order status "Released".
You have to sent this control recipe to process control (CO53).
Hope it is helpful.
Regards,
Sachin -
When I plug my iphone into my mac to charge/sync, iphoto always opens before itunes and takes a time to close. How can I stop iphoto from opening automatically please
In iphoto go to preferences > general and al the bottom will be a drop down menu that will say connecting camera opens: just change this from iphoto to no application
-
WWith the upgrade to new IOS 7, I can't figure out how to close aps running in the background . This is affecting my battery life. Can someone please tell me how to close aps to reduce frequent charging of the battery? Thanks
Double tap the home button and find the app you want to close. Swipe up or drag up on the app thumbnail to close it. Not the icon, the app preview thumbnail above the icon, drag up on that.
-
Apps run automatically - turn off? How to close app w/out Close option?
I am running two apps I want to close and only run when I choose them.
One (The Missing Sync) at least has a Close option, which works. So I can at least get that out of my running apps list.
The other (Funambol Sync) doesn't even have a Close option!
When I do a battery pull, BOTH run automatically so they're back in memory!
1) How do I control which apps run automatically after a battery pull? If I can keep them from re-running, at least I can control my memory by doing a battery pull.
2) Any ideas on how to close Funambol Sync or any other app that has no "Close" option on its menu? I've put in a messsage to those guys but no answer so far.I have been told that BB does not have a central place where all auto-run apps are listed/controlled.
Apparently each app does its own specification re auto-running, and so must be controlled one-by-one.
For at least one of these (Funambol Sync), the only option finally available was to just delete it, which is what I did. As long as the other one "plays nice", it can stay! -
How to void Life Events in Detected status
Hi,
There are lots of old Life Events in Detected status in the system. And recently the team terminated some employees who were not supposed to be in the system and that created around 3000 potential life events. Is there was way I can void all these Life Events that are there in Detected status?
Thansk and Regards,
ArchanaHi,
There are lots of old Life Events in Detected status in the system. And recently the team terminated some employees who were not supposed to be in the system and that created around 3000 potential life events. Is there was way I can void all these Life Events that are there in Detected status?
Thansk and Regards,
Archana -
How to create process chains,and how to use process like and or xor
Hi,
How to create process chains,and how to use process like and or xor.
can any one please give me a example in each.
Thanks,
cheta.Hi Cheta,
Here is step by step procedure to create process chains
Process chain is nothing but executing a process ..(or) loading the data any process we can do in background.. that means.. automatically we can execute our process based on Time or any event..
Creating Process Chains
Prerequisites
If you want to include a load process in the process chain, you need to have already created an InfoPackage.
You cannot load flat file data from a client workstation in the background. For this reason, you have stored your data on an application server.
Creating Process Chains
You have the option of creating a process chain in the process chain maintenance screen directly or by using a maintenance dialog for a process:
Creating a Process Chain Directly in the Process Chain Maintenance Screen
You are in the BW Administrator Workbench.
1. Click on the Process Chain Maintenance icon in the AWB toolbar.
The Process Chain Selection dialog window appears.
2. Choose Create.
3. Enter the technical name and a description of the chain, and confirm your entry.
The Add Start Process dialog window appears.
4. Create a variant for a start process.
1. a. On the Maintain Start Process screen, choose whether you want to schedule the chain directly or whether you want to start it using a metachain.
2. b. If you choose to schedule the chain directly, enter the start date value for the chain under Change Selections and save your entries.
The Maintain Start Process screen appears again.
3. c. Save your entries, return to the previous screen and confirm your entries in the Add Start Process dialog window.
You are taken to the Plan View of the process chain maintenance screen.
In the left-hand area of the screen, a navigation area is displayed. In the right-hand area of the screen, the process chain is displayed.
5. Use the drag-and-drop function to add the relevant processes into your process chain.
You use the Process Types function to select the processes. This sorts the process types according to different categories. You can also call up InfoPackages and processes for the data target from the separate InfoSources and Data Targets navigation trees.
Hope this helps
Regards
Karthik
Maybe you are looking for
-
When I open Pages the template chooser doesn't open even though i have chosen that in preferences
In Pages preferences, I have chosen to open the template chooser window, but for some reason when I open Pages, it continually opens in a finder type window and I have to choose "new document" and then I will get the template chooser window...is this
-
Why is copy missing from PDF?
I have PDFs with copy missing when I open them. I am running Macbook with OSx 10.6.7 and Adobe 10.0.2
-
Assistance in writing Query / Query Logic.
I have a peculiar requirement to fetch data. Table Structure ( Sample ... although real table has more fields) Order ( orderid varchar2(30), custid varchar2(30), status varchar2(1), createdon datetime ) Sample Data: OrderID CustID AccID Status create
-
Forcing a refresh in Adobe Content Viewer?
I'm trying to update an InDD CS6 article with updated .OAM links (the links have new file names). But the iPad refuses to load some of the new animations or will only load the poster image of an .OAM file. If I copy one of these problematic pages in
-
Magic mouse doesn't allow me to zoom in and out, just scroll
just purchased imac and magic mouse, read allow instructions and how to use and have everything correct in settings but doesnt let me zoom in and out. tried holding control down and still nothing ?