How to close production Order

Hi All,
The production order planned and Released date is 17/12/2008, and the Issue for production order document date is 17/12/2009 (it was entered by mistake in the system with 12 months difference). When you try to close the Production Order the system shows an error. How we can deal with this sistuation?
Thanks
SV Reddy

Dear,
Kindly check the note 1330151 below:
Symptom
When closing production order, the error message "Invalid Account" is
shown, although the account settings are correct.
Other terms
WIP Inventory Account, WIP Inventory Variance Account
Reason and Prerequisites
Consulting
Solution
Please go to "Document Settings", tab "Per Document", Document "Journal
Entry" and check "Allow Zero Amount Line".
Explanation:
When closing production order, a JE between "WIP Stock Account" and "WIP
Stock Variance Account" will be posted. When there is no difference
between actual component cost and product cost, the amount in JE will be
zero. That's why if zero amount line is blocked in journal entry, the
production order can't be closed.
WIsh it is helpful for you.
Regards
Apple

Similar Messages

Finance cannot close production order due to some PO# error message

When user is trying to close production order(using tcode CO02) getting error "..Production order #: Purchse order still exists..".
I would like to know what is the reson for this error and how user can close this production order.
Appreciate your quick response.
Thanks,
Aritra

status of production order: TECO PRT CNF DLV PRC BASC BCRQ GMPS*.
Vijay actually basic problem is user is getting error "You cannot select assembly order 16600192 for deletion" when he is trying to delete one line item from sales order using tcode VA02...
-i said to close the production order
-but they said not able to close as they are getting error "purchase order still exists"
-said to close all purchase order
-they replied "We cannot close the open orders as some we are waiting for the materials to be arrived and some order are blanket orders. Why we don't have such problem all this while and now ? This is our common practise.
Is there any way of force closed for Finance since the SF material has been GR in 23/03/2006.We only need
to closed the order, that's all."
pls tell me what to do, can we close production order in such scenario?
thanks
Aritra

How to trace production order history

Hi,
how to trace production order history, with all information like some addtion and deletion of components in production order.
I need the history like how we are doing ECM in master data history.
Regards,
S.Suresh.
Edited by: suresh subramanian on Jul 16, 2008 7:31 AM

Dear Suresh,
Please refer the link,[http://help.sap.com/saphelp_46c/helpdata/en/35/ce8d378d0302cae10000009b38f9b7/frameset.htm]
Regards,
R.Brahmankar

How to block production order creation when maintenance order is generated.

Hi All,
Kindly share how to block production order generation when maintenance order is generated.

Integration between PP module and PM module
PP/PM Workcenter Integration
There are many threads & documents available. Please do some search.

How to get Production Order Quantity

I have material number and plant. From this information how to get production order quantity that is displayed in the transaction MD04.
Thanks,
Vinay.

Hi Vinay,
Have you looked FM <b>MD_STOCK_REQUIREMENTS_LIST_API</b>?
Hope this will help.
Regards,
Ferry ianto

How to create Production order in SAP B1

Hi Experts,
Can anyone send me a link on how to create Production Order in SAP Business One?
Regards,
Vishal
Ver: SAP Business One 2005 B (7.40.253) SP: 00 PL: 43

Hi,
Kindly check the following link for the How to Guide on various topics :
[How to Guide|https://websmp210.sap-ag.de/~form/sapnet?_FRAME=OBJECT&_HIER_KEY=701100035871000371280&_SCENARIO=01100035870000000183&]
You can search for the document Production and Bill of Materials.
Kind Regards,
Jitin
SAP Business One Forum Team

AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE

Hi Experts...
Requirement: AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE HISTORY?
I have seen many threads about implementing OSS NOTES 390635, but hardly any one narrated the process in detail as to how to see 'Change History'..
I just would like to know 'how' and 'from where' to find Order Change History in detail (i.e Prod .order Comp. change history, Prod. Ord. Operation Change History, Prod. order header change history etc..)
In general this isssue might sound old one..but 'POST IMPLEMENTING OSS NOTE 390635' is rare one.
Folks need your expert comments and valuable suggestions....
Thank You...
Lucky

Dear
You should goto CO02-Enter Production Order -Goto -Change Management -Here it will list down all the chages with relevent information .
Refer : Re: Production order changes history
Production orders
Regards
JH

How to attempt production orders and get feedback by using IDocs

Hi,
I'm new new to SAP and R3 respectively mySAP. I need to know how to use IDocs (over file system) to attempt production orders to an extern application and how to get the feedback of the whole orders and single operations.
I found the IDoc-base-type "PPCC2RECORDER01" to send production orders. Is that the right base type for production orders?
(In consideration of compatibility and support me was recommend to avoid the old types OPERA2 and CONF21.)
What IDoc-types do I need to get feedback about a production order and its operations?
I hope someone is understanding my questions is able to help me. Please apologize my broken English.
Thanks!
Hannes

PROGRAM....... ZRCCLORDPROC
TITLE......... Production Odrer Idocs
AUTHOR........ Aveek Ghose
DATE WRITTEN.. 15/09/2006
R/3 RELEASE... 4.6C
=====================================================================*
COPIED FROM... N/A
DESCRIPTION...
*& Creation of production order IDOCs to a given selection
*& This program selects to an input given via the selection screen the *
*& corresponding production orders from the database. Then the function
*& module for creation of planned order idocs is called.               *
*& In general this report is called from the report RCCLTRAN, but it   *
*& can also be used for its own.                                       *
=====================================================================*
PROGRAM TYPE.. Outbound Interface
DEV. CLASS.... ZPD1
LOGICAL DB.... N/A
=====================================================================*
SCREENS....... N/A
GUI TITLE..... N/A
GUI STATUS.... N/A
TRANSACTIONS.. N/A
USER EXITS.... N/A
=====================================================================*
CHANGE HISTORY                                                       *
Date       By        Correction Number & Brief Description     Release
Tables / Structures
REPORT zrcclordproc
        NO STANDARD PAGE HEADING
        MESSAGE-ID ZCUST
        LINE-COUNT 65(0)
        LINE-SIZE 255.
INCLUDE RCORDO01.                    " PBO-Modules                   *
INCLUDE RCORDI01.                    " PAI-Modules                   *
INCLUDE RCORDF01.                    " FORM-Routines                 *
--> Global data
TYPE-POOLS: cloi.
include zprodata.        "Types / constants for Orderselection
include zrcordtop.                      "Tables / Data for this report
include zrcordtop1.
include yrccl_constants.
TABLES : jcds,
         tvarv,
         zzzz_xref_data.
TYPES: BEGIN OF ty_date,
          aufnr TYPE aufnr,
          aedat TYPE aufaedat,
          aezeit TYPE co_chg_time,
          erdat TYPE auferfdat,
          erfzeit TYPE co_ins_time,
          loekz TYPE aufloekz,
          indicator(1) TYPE c,
       END OF ty_date.
DATA: is_enhancement type isu_ord_segments_determine.
DATA: itab_date TYPE STANDARD TABLE OF ty_date
                     INITIAL SIZE 0 WITH HEADER LINE.
DATA: f_objnr TYPE j_objnr.
DATA: g_report_sub_head(72) TYPE c,          "Sub-Header hold area
      g_report_head(72)     TYPE c,          "Header hold area
      g_run_date(72)        TYPE c,          "Holds message for Run date
      g_run_time(72)        TYPE c.          "Holds message for Run time
DATA:
f_old_date TYPE datum,
f_old_time TYPE uzeit,
f_continue(1) TYPE c.
END OF INSERTION DS001
--> Überschrift für sonstige Einstellungen
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN BEGIN OF BLOCK miscellaneous WITH FRAME.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN COMMENT 1(30) text-001. "#EC
SELECTION-SCREEN SKIP 1.
*>> Logical system comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-002.
SELECTION-SCREEN POSITION 35.
PARAMETERS opt_sys LIKE tbdlst-logsys.
SELECTION-SCREEN END OF LINE.
*>> Messagetype comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-003.
SELECTION-SCREEN POSITION 35.
PARAMETERS mestyp LIKE tbdme-mestyp.
SELECTION-SCREEN END OF LINE.
*>> Messagetype comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-004.
SELECTION-SCREEN POSITION 35.
PARAMETERS:     p_date     TYPE sydatum.       "last run date
SELECTION-SCREEN END OF LINE.
*>> Messagetype comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-005.
SELECTION-SCREEN POSITION 35.
PARAMETERS:     p_time     TYPE syuzeit.       "last run time
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK MISCELLANEOUS.
*MOD-006
*>> Messagetype comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-006.
SELECTION-SCREEN POSITION 35.
PARAMETERS: p_update   AS   CHECKBOX DEFAULT space.
SELECTION-SCREEN END OF LINE.
*MOD-006
*MOD-006
*>> Messagetype comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-007.
SELECTION-SCREEN POSITION 32.
SELECT-OPTIONS: s_rundt FOR sy-datum NO-EXTENSION.
SELECTION-SCREEN END OF LINE.
*MOD-006
*MOD-006
*>> Messagetype comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-008.
SELECTION-SCREEN POSITION 32.
SELECT-OPTIONS: s_runtm FOR sy-uzeit NO-EXTENSION.
SELECTION-SCREEN END OF LINE.
*MOD-006
**MOD-006
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT 3(30) text-009.
*SELECTION-SCREEN POSITION 32.
*SELECT-OPTIONS: s_emat FOR zzzz_xref_data-z_in_value.
*SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK miscellaneous.
**MOD-006
Write selected AUFPL numbers via ranges table to memory ?
PARAMETERS:
ordtomem TYPE cloi_x DEFAULT '' NO-DISPLAY. "X: yes
do not select from MARC, but use ranges tables directly.   MK 4.0C
matnr_gl and werks_gl must have the same length.
PARAMETERS: no_sel TYPE c DEFAULT ' ' NO-DISPLAY.
--> Normal selection parameters for ORD comes from the logical db
*&   Event START-OF-SELECTION
START-OF-SELECTION.
--> Select the ORD according to the selected
    MRP controller, Material, work center and plant
*MOD-006
Validate the last run date & Time
PERFORM validate_last_run_date_time.
*MOD-006
BEGIN OF INSERTION DS001
get the entry of the last program run
select single * for update from ycloidownlprot
                 where logsys = OPT_SYS and
                       downloadtype eq C_DOWNL_PROCESS_ORDERS.
if YCLOIDOWNLPROT-IN_PROGRESS eq CLOI_TRUE.
program is already running, do not allow to start again
   write : / text-004, YCLOIDOWNLPROT-USERNAME.
   exit.
endif.
YCLOIDOWNLPROT-MANDT        = SY-MANDT.
YCLOIDOWNLPROT-LOGSYS       = OPT_SYS.
YCLOIDOWNLPROT-START_DATE   = SY-DATUM.
YCLOIDOWNLPROT-START_TIME   = SY-UZEIT.
YCLOIDOWNLPROT-USERNAME     = SY-UNAME.
YCLOIDOWNLPROT-DOWNLOADTYPE = C_DOWNL_PROCESS_ORDERS.
YCLOIDOWNLPROT-IN_PROGRESS = CLOI_TRUE.
insert or update entry (dependant if entry already exists)
MODIFY YCLOIDOWNLPROT.
COMMIT WORK.
CLEAR CREATED_MASTERIDOCS_PRO.
EXPORT CREATED_MASTERIDOCS_PRO TO MEMORY ID 'YLOI001'.
END OF INSERTION DS001
BEGIN OF INSERTION DS001
if not sscrfields-ucomm = 'ONLI'.   mk zu 4.0
exit.
endif.
if s_dispo is initial and
    s_matnr is initial and
    s_arbpl is initial and
    s_werks is initial.
   exit.
endif.
Send only orders with type 40 - process orders
p_autyp = '40'.
END OF INSERTION DS001
*>> Put the ranges tabs back into matwrk list if no selection (NO_SEL)
IF no_sel = cloi_true.
    CLEAR t_matwrk_key. REFRESH t_matwrk_key.
    LOOP AT s_matnr.
      t_matwrk_key-matnr = s_matnr-low.
      READ TABLE s_werks INDEX sy-tabix.
      t_matwrk_key-werks = s_werks-low.
      APPEND t_matwrk_key.
    ENDLOOP.
    SORT t_matwrk_key BY matnr werks.
    DELETE ADJACENT DUPLICATES FROM t_matwrk_key.
delete duplicate duplicates from ranges table. Therfore sort by LOW
(HIGH is not used in this case).
    SORT s_matnr BY low.
    DELETE ADJACENT DUPLICATES FROM s_matnr.
    SORT s_werks BY low.
    DELETE ADJACENT DUPLICATES FROM s_werks.
ENDIF.
--> Determine which segments are selected in the message type
PERFORM ord_segments_determine
    USING mestyp
    CHANGING afpo_x
             jstk_x
             afab_x
             affl_x
             afvo_x
             kbed_x
             jstv_x
             resb_x
             kbeu_x
             afuv_x
             is_enhancement
             jstu_x.
Export the flags to the memory, because the following subroutine
must not have any parameters !!!
EXPORT affl_x
         afvo_x
         kbed_x
         resb_x
         kbeu_x
         afuv_x
         TO MEMORY ID 'LOI03'.
MK 19980326 enhanced selections on header/operation level
get selection profile for log system from customizing if available
SELECT SINGLE * FROM tcloi9 WHERE logsys = opt_sys.
if entry exists for the logical system
IF sy-subrc = 0.
if an selection profile for the order is entered, use it for selection
    IF NOT tcloi9-ord_selid IS INITIAL.
      p_selid = tcloi9-ord_selid.
    ENDIF.
    IF NOT tcloi9-ord_opr_selid IS INITIAL AND
       NOT afvo_x IS INITIAL AND NOT affl_x IS INITIAL.
      ord_opr_selid = tcloi9-ord_opr_selid.
    ENDIF.
ENDIF.
initialize control key table for selections
CALL FUNCTION 'CLOI_STEUS_GET'
       EXPORTING
            logsys_to_init         = opt_sys
       IMPORTING
            no_entry_for_logsys    = no_entry_for_logsys
       TABLES
            t_steus                = t_steus
       EXCEPTIONS
            logsys_not_initialized = 1
            OTHERS                 = 2.
Write structure information into the memory
perform fill_memory_selobj.
-> import table with already sent orders
IMPORT gt_aufnrdone FROM MEMORY ID 'LOIAUFNRTAB'.         "N599845
SORT gt_aufnrdone BY low.                                 "N599845
--> Read header information
GET ioheader.
Check if material/plant combination is selected MK 4.0C
CLEAR check_flg.
IF no_sel = cloi_true.
    READ TABLE t_matwrk_key
               WITH KEY matnr = ioheader-matnr
                         werks = ioheader-werks BINARY SEARCH.
    IF sy-subrc <> 0.
      check_flg = cloi_true.
    ENDIF.
ENDIF.
-> check if order was already sent
IF NOT gt_aufnrdone[] IS INITIAL.                         "N599845
    READ TABLE gt_aufnrdone WITH KEY                        "N599845
      low = ioheader-aufnr                                  "N599845
      TRANSPORTING NO FIELDS                                "N599845
      BINARY SEARCH.                                        "N599845
    IF sy-subrc = 0.                                        "N599845
    -> order already sent
      check_flg = cloi_true.                                "N599845
    ENDIF.                                                  "N599845
ENDIF.                                                    "N599845
leave GET routine if check_flg is set.
CHECK check_flg IS INITIAL.
CLEAR t_afpo. REFRESH t_afpo.
CLEAR t_affl. REFRESH t_affl.
MOVE-CORRESPONDING ioheader TO t_afko.
GET ioheader LATE.
BEGIN OF INSERTION DS001
Check whether the process order has been changed since the last
run of the program
clear f_continue.
if the CHANGED date is greater than the last run or initial
IF IOHEADER-AEDAT GT F_OLD_DATE OR
       ( ioheader-aedat is initial and
         ioheader-aezeit is initial ).
if the CHANGED date is initial check the creation date
   if ioheader-aedat is initial.
if the creation date is greater than or equal to the date of the last
run, if it is equal the creation time must be later or equal to the
start time of the last run
     IF IOHEADER-ERDAT GT F_OLD_DATE OR
        ( IOHEADER-ERDAT EQ F_OLD_DATE AND
          IOHEADER-ERFZEIT GE F_OLD_TIME ).
       f_continue = 'X'.
     endif.
   else.
     f_continue = 'X'.
   endif.
if the CHANGED dat is not initial check it against the last run
ELSEIF IOHEADER-AEDAT EQ F_OLD_DATE AND
        IOHEADER-AEZEIT GE F_OLD_TIME.
   f_continue ='X'.
endif.
Aenderung 295/99 Selektions-Aenderung vom 26. August 99
Wenn Auftrag bereits techn. abgeschlossen ist, so darf kein IDOC
erzeugt werden, wenn Auftrag zum löschen vorgemerkt wird.
CONCATENATE 'OR' IOHEADER-AUFNR INTO F_OBJNR.
SELECT SINGLE * FROM JEST
                 WHERE OBJNR = F_OBJNR
                 AND   STAT = 'I0045'.
IF JEST-INACT EQ SPACE AND SY-SUBRC EQ 0.
   SELECT * FROM JCDS WHERE OBJNR EQ F_OBJNR AND
                            STAT EQ 'I0045' AND
                            INACT EQ SPACE.
letzte Aenderung des Status TABG wird geprueft    Beg. WA 354/99
   ENDSELECT.
IF ( F_OLD_DATE GT JCDS-UDATE OR                         " Beg JB_02
      ( F_OLD_DATE EQ JCDS-UDATE AND
       F_OLD_TIME GT JCDS-UTIME ) ) AND                    " End JB_02
      SY-SUBRC EQ 0.
     CLEAR F_CONTINUE.
   ENDIF.
ENDIF.
Ende 295/99
check f_continue eq 'X'.
END OF INSERTION DS001
t_afko-t_afpo = t_afpo[].
t_afko-t_jstk = t_jstk[].
t_afko-t_affl = t_affl[].
t_afko-t_afab = t_afab[].
APPEND t_afko.
IF jstk_x = cloi_x.
    t_objnr-objnr = ioheader-objnr.
    APPEND t_objnr.
ENDIF.
*---> Remember the orders that are already selected for the global
    selection parameters
IF ordtomem = cloi_x.                "write order numbers to memory
    t_aufnr_range_done-sign = 'I'.
    t_aufnr_range_done-option = 'NE'.
    t_aufnr_range_done-low = ioheader-aufpl.
    APPEND t_aufnr_range_done.
ENDIF.
*---> Remember the orders internal/external keys for AFAB (relationship)
IF afab_x = cloi_x.
    MOVE-CORRESPONDING ioheader TO t_aufpl_aufnr.
    APPEND t_aufpl_aufnr.
ENDIF.
check afpo_x = cloi_x.
GET ioitem.
BEGIN OF INSERTION DS001
Check whether the process order has been changed since the last
run of the program
CLEAR F_CONTINUE.
if the CHANGED date is greater than the last run or initial
IF IOHEADER-AEDAT GT F_OLD_DATE OR
       ( ioheader-aedat is initial and
         ioheader-aezeit is initial ).
if the CHANGED date is initial check the creation date
   if ioheader-aedat is initial.
if the creation date is greater than or equal to the date of the last
run, if it is equal the creation time must be later or equal to the
start time of the last run
     IF IOHEADER-ERDAT GT F_OLD_DATE OR
        ( IOHEADER-ERDAT EQ F_OLD_DATE AND
          IOHEADER-ERFZEIT GE F_OLD_TIME ).
       f_continue = 'X'.
     endif.
   else.
     f_continue = 'X'.
   endif.
if the CHANGED date is not initial check it against the last run
ELSEIF IOHEADER-AEDAT EQ F_OLD_DATE AND
        IOHEADER-AEZEIT GE F_OLD_TIME.
   f_continue ='X'.
endif.
Aenderung 295/99 Selektions-Aenderung vom 26. August 99
Wenn Auftrag bereits techn. abgeschlossen ist, so darf kein IDOC
erzeugt werden, wenn Auftrag zum löschen vorgemerkt wird.
CONCATENATE 'OR' IOHEADER-AUFNR INTO F_OBJNR.
SELECT SINGLE * FROM JEST
                 WHERE OBJNR = F_OBJNR
                 AND   STAT = 'I0045'.
IF JEST-INACT EQ SPACE AND SY-SUBRC EQ 0.
   SELECT * FROM JCDS WHERE OBJNR EQ F_OBJNR AND
                            STAT EQ 'I0045' AND
                            INACT EQ SPACE.
letzte Aenderung des Status TABG wird geprueft
   ENDSELECT.
IF ( F_OLD_DATE GT JCDS-UDATE OR                         " Beg JB_02
      ( F_OLD_DATE EQ JCDS-UDATE AND
       F_OLD_TIME GT JCDS-UTIME ) ) AND                    " End JB_02
      SY-SUBRC EQ 0.
     CLEAR F_CONTINUE.
   ENDIF.
ENDIF.
Ende 295/99
check f_continue eq 'X'.
END OF INSERTION DS001
IF afpo_x = cloi_x.
    MOVE-CORRESPONDING ioitem TO t_afpo.
    APPEND t_afpo.
ENDIF.
Put matnr and ltrmi in a help structure, which later goes to t_afpo
IF ioitem-posnr = '0001'.
    MOVE-CORRESPONDING ioitem TO help_afpo.
    APPEND help_afpo.
put PSP element (internal key) into order header. Unique for positions
    IF t_afko-pspel IS INITIAL.
      t_afko-pspel = ioitem-projn.
    ENDIF.
ENDIF.
CHECK affl_x = cloi_x.
GET iosequen.
CLEAR t_afvo. REFRESH t_afvo.
MOVE-CORRESPONDING iosequen TO t_affl.
GET iosequen LATE.
t_affl-t_afvo = t_afvo[].
APPEND t_affl.
CHECK afvo_x = cloi_x.
GET iooper.
CLEAR t_kbed. REFRESH t_kbed.
CLEAR t_afuv. REFRESH t_afuv.
CLEAR t_resb. REFRESH t_resb.
MOVE-CORRESPONDING iooper TO t_afvo.
"Temporary storing of operation information if for a phase
"the corresponding operation has is needed
MOVE-CORRESPONDING iooper TO t_aufpl_aplzl_vornr.
APPEND t_aufpl_aplzl_vornr.
check, if selection profile (if exists) for the operation is ok
IF NOT ord_opr_selid IS INITIAL.
    CALL FUNCTION 'STATUS_CHECK_BY_SELSCHEM'
         EXPORTING
              objnr          = iooper-objnr
              selid          = ord_opr_selid
         IMPORTING
              fullfill       = status_ok
         EXCEPTIONS
              no_stat_tab    = 1
              no_stat_scheme = 2
              OTHERS         = 3.
    IF sy-subrc <> 0.
      status_ok = cloi_x.
    ENDIF.
ELSE.
    status_ok = cloi_x.
ENDIF.
check if control key (STEUS) should not be selected.
control_key_ok = cloi_x.
IF no_entry_for_logsys IS INITIAL.
    READ TABLE t_steus WITH KEY
         steus = iooper-steus BINARY SEARCH.
    IF sy-subrc <> 0.
      CLEAR control_key_ok.
    ENDIF.
ENDIF.
CHECK NOT status_ok IS INITIAL.
CHECK NOT control_key_ok IS INITIAL.
GET iooper LATE.
t_afvo-t_kbed = t_kbed[].
t_afvo-t_afuv = t_afuv[].
t_afvo-t_resb = t_resb[].
APPEND t_afvo.
IF jstv_x = cloi_x.
    t_objnr-objnr = iooper-objnr.
    APPEND t_objnr.
ENDIF.
CHECK kbed_x = cloi_x.
GET ioopcap.
MOVE-CORRESPONDING ioopcap TO t_kbed.
APPEND t_kbed.
CHECK resb_x = cloi_x.
GET ioopcomp.
do not transfer RESB entries with deletion flag
CHECK ioopcomp-xloek IS INITIAL.
MOVE-CORRESPONDING ioopcomp TO t_resb.
APPEND t_resb.
CHECK afuv_x = cloi_x.
GET iosoper.
CLEAR t_kbeu. REFRESH t_kbeu.
MOVE-CORRESPONDING iosoper TO t_afuv.
check if control key (STEUS) should not be selected.
control_key_ok = cloi_x.
IF no_entry_for_logsys IS INITIAL.
    READ TABLE t_steus WITH KEY
         steus = iooper-steus BINARY SEARCH.
    IF sy-subrc <> 0.
      CLEAR control_key_ok.
    ENDIF.
ENDIF.
CHECK NOT control_key_ok IS INITIAL.
GET iosoper LATE.
t_afuv-t_kbeu = t_kbeu[].
APPEND t_afuv.
IF jstv_x = cloi_x.
    t_objnr-objnr = iosoper-objnr.
    APPEND t_objnr.
ENDIF.
CHECK kbeu_x = cloi_x.
GET iosocap.
MOVE-CORRESPONDING iosocap TO t_kbeu.
APPEND t_kbeu.
*&   Event END-OF-SELECTION
END-OF-SELECTION.
*MOD-006
DATA: itab_matnr TYPE zzzz_xref_data OCCURS 0.
DATA: l_wa_matnr TYPE zzzz_xref_data.
DATA: l_wa_matnr_value TYPE zzzz_xref_data-z_in_value.
DATA: l_wa_afko TYPE cloi_afko_struct.
SELECT *
FROM zzzz_xref_data
APPENDING TABLE itab_matnr
WHERE trans_id = 'ZELCUSMATLOOKUP' AND
       ( z_in_value IN s_matnr OR
         z_out_value IN s_matnr ).
IF sy-subrc = 0.
     LOOP AT ITAB_MATNR INTO L_WA_MATNR.
       L_WA_MATNR_VALUE = L_WA_MATNR-z_OUT_VALUE.
       S_MATNR-LOW = L_WA_MATNR_VALUE.
       S_MATNR-SIGN = 'I'.
       S_MATNR-OPTION = 'EQ'.
       APPEND S_MATNR.
     ENDLOOP.
   DELETE itab_matnr WHERE NOT in_value IN s_emat.
   SORT itab_matnr BY out_value.
ENDIF.
CLEAR: l_wa_matnr.
**MOD-010
Data which is not in the material lookup table but in the T_AFKO.
LOOP AT t_afko INTO l_wa_afko.
   READ TABLE S_MATNR WITH KEY LOW = L_WA_AFKO-MATNR BINARY SEARCH.
    READ TABLE itab_matnr INTO l_wa_matnr
        WITH KEY z_out_value = l_wa_afko-matnr BINARY SEARCH.
    IF sy-subrc NE 0.
      l_wa_afko-rgekz = 'X'.
      MODIFY t_afko FROM l_wa_afko TRANSPORTING rgekz.
    ENDIF.
   IF NOT P_DATE IS INITIAL.
     IF T_AFKO-GSTRP < p_date OR
             ( T_AFKO-GSTRP = p_date AND
               T_AFKO-GSUZP > p_time ).
       L_WA_AFKO-RGEKZ = 'X'.
       MODIFY T_AFKO FROM L_WA_AFKO TRANSPORTING RGEKZ.
     ENDIF.
   ENDIF.
ENDLOOP.
Delete Data which is not in the material lookup
table but in the T_AFKO.
DELETE t_afko WHERE rgekz = 'X'.
*MOD-010
*MOD-006
BEGIN OF INSERTION DS001
DATA: l_wa_itab_date TYPE ty_date.
Check whether the process order has been changed since the last
run of the program
CLEAR f_continue.
IF NOT t_afko IS INITIAL.
    SELECT aufnr aedat aezeit erdat erfzeit loekz
    INTO TABLE itab_date
    FROM aufk
    FOR ALL ENTRIES IN t_afko
    WHERE aufnr = t_afko-aufnr.
    IF sy-subrc = 0.
      IF NOT p_date IS INITIAL.
        CLEAR: itab_date.
Check whether the process order has been changed since the last
run of the program
        LOOP AT itab_date INTO l_wa_itab_date.
if the CHANGED date is greater than the last run or initial
          IF l_wa_itab_date-aedat GT p_date OR
                ( l_wa_itab_date-aedat IS INITIAL AND
                  l_wa_itab_date-aezeit IS INITIAL ).
if the CHANGED date is initial check the creation date
            IF l_wa_itab_date-aedat IS INITIAL.
if the creation date is greater than or equal to the date of the last
run, if it is equal the creation time must be later or equal to the
start time of the last run
              IF l_wa_itab_date-erdat GT p_date OR
                 ( l_wa_itab_date-erdat EQ p_date AND
                   l_wa_itab_date-erfzeit GE p_time ).
                f_continue = 'X'.
              ELSE.
                l_wa_itab_date-indicator = 'X'.
            MODIFY itab_date FROM l_wa_itab_date TRANSPORTING indicator.
              ENDIF.
            ELSE.
              f_continue = 'X'.
            ENDIF.
if the CHANGED dat is not initial check it against the last run
          ELSEIF l_wa_itab_date-aedat EQ p_date AND
                 l_wa_itab_date-aezeit GE p_time.
            f_continue ='X'.
          ELSE.
            l_wa_itab_date-indicator = 'X'.
            MODIFY itab_date FROM l_wa_itab_date TRANSPORTING indicator.
          ENDIF.
        ENDLOOP.
*MOD-006
ELSE.
     CLEAR: ITAB_DATE.
     LOOP AT ITAB_DATE INTO L_WA_ITAB_DATE.
if the CHANGED date is greater than the last run or initial
       IF L_WA_ITAB_DATE-AEDAT GT P_RUNDT OR
             ( L_WA_ITAB_DATE-aedat is initial and
               L_WA_ITAB_DATE-aezeit is initial ).
if the CHANGED date is initial check the creation date
         if l_wa_itab_date-aedat is initial.
if the creation date is greater than or equal to the date of the last
run, if it is equal the creation time must be later or equal to the
start time of the last run
           IF L_WA_ITAB_DATE-ERDAT GT P_RUNDT OR
              ( L_WA_ITAB_DATE-ERDAT EQ P_RUNDT AND
                L_WA_ITAB_DATE-ERFZEIT GE S_RUNTM-LOW OR
                L_WA_ITAB_DATE-ERFZEIT LE S_RUNTM-HIGH ).
             f_continue = 'X'.
           else.
             l_wa_itab_date-indicator = 'X'.
             MODIFY ITAB_DATE FROM L_WA_ITAB_DATE
                               TRANSPORTING INDICATOR.
           endif.
         else.
           f_continue = 'X'.
         endif.
if the CHANGED dat is not initial check it against the last run
       ELSEIF L_WA_ITAB_DATE-AEDAT EQ P_RUNDT AND
              L_WA_ITAB_DATE-AEZEIT GE S_RUNTM-LOW.
         f_continue ='X'.
       ELSE.
         l_wa_itab_date-indicator = 'X'.
         MODIFY ITAB_DATE FROM L_WA_ITAB_DATE
                            TRANSPORTING INDICATOR.
       endif.
     ENDLOOP.
*MOD-006
      ENDIF.
    ENDIF.
ENDIF.
DELETE ITAB_DATE WHERE INDICATOR = 'X'.
*MOD-006
CLEAR: itab_date.
IF s_rundt-high IS INITIAL AND NOT s_rundt IS INITIAL.
    s_rundt-high = sy-datum.
ENDIF.
LOOP AT itab_date INTO l_wa_itab_date.
    IF NOT s_rundt IS INITIAL.
if the CHANGED date is greater than the last run or initial
      IF    ( l_wa_itab_date-aedat IS INITIAL AND
              l_wa_itab_date-aezeit IS INITIAL ).
if the CHANGED date is initial check the creation date
        IF l_wa_itab_date-aedat IS INITIAL.
if the creation date is greater than or equal to the date of the last
run, if it is equal the creation time must be later or equal to the
start time of the last run
          IF ( l_wa_itab_date-erdat GT s_rundt-low AND
             l_wa_itab_date-erfzeit GT s_runtm-low ) AND
             ( l_wa_itab_date-erdat LT s_rundt-high AND
             l_wa_itab_date-erfzeit LT s_runtm-high ).
            f_continue = 'X'.
          ELSE.
            l_wa_itab_date-indicator = 'X'.
            MODIFY itab_date FROM l_wa_itab_date
                              TRANSPORTING indicator.
          ENDIF.
        ELSE.
          f_continue = 'X'.
        ENDIF.
if the CHANGED dat is not initial check it against the last run
      ELSEIF ( l_wa_itab_date-aedat GE s_rundt-low AND
              l_wa_itab_date-aezeit GE s_runtm-low ) AND
             ( l_wa_itab_date-aedat LE s_rundt-high AND
             l_wa_itab_date-aezeit LE s_runtm-high ).
        f_continue ='X'.
      ELSE.
        l_wa_itab_date-indicator = 'X'.
        MODIFY itab_date FROM l_wa_itab_date
                           TRANSPORTING indicator.
      ENDIF.
    ENDIF.
ENDLOOP.
DELETE itab_date WHERE indicator = 'X'.
*MOD-006
**MOD-006
LOOP AT t_afko INTO l_wa_afko.
   READ TABLE itab_date INTO l_wa_itab_date
            WITH KEY aufnr = l_wa_afko-aufnr BINARY SEARCH.
   IF sy-subrc NE 0.
     l_wa_afko-rgekz = 'X'.
     MODIFY t_afko FROM l_wa_afko TRANSPORTING rgekz.
   ENDIF.
ENDLOOP.
DELETE t_afko WHERE rgekz = 'X'.
**MOD-006
-> initialize logical data base to reduce memory consumption
PERFORM ldb_process_init(sapdbioc)
    CHANGING
      lv_subrc.
--> add information to the order structure that is not
    selected via logical database:
    - if AFVO-entry is a phase (phflg) --> fill field for
      corresponding operation number (PVZNR)
      The internal node number (aplzl) of the corresponding operation
      is in field PVZKN of the phase
    - relationship information: E1AFABL
      especially: select external numbers for the used
      internal numbers in the table AFAB
    - status information of the order header: E1JSTKL
    - status information of the operation: E1JSTVL
--> Put matnr and ltrmi in the table t_afko
SORT t_afko BY aufnr.
LOOP AT help_afpo.
    READ TABLE t_afko WITH KEY aufnr = help_afpo-aufnr
      ASSIGNING -gltri = help_afpo-ltrmi.
    ENDIF.
ENDLOOP.
--> Select entries for order and operation status
IF NOT t_objnr[] IS INITIAL.
    SELECT objnr stat FROM jest INTO TABLE t_jest2
      FOR ALL ENTRIES IN t_objnr
      WHERE objnr = t_objnr-objnr
      AND   inact <> 'X'.
ENDIF.
--> Select entries for relationships from afab for all orders
    into table t_afab_tmp
SORT t_aufpl_aplzl_vornr BY aufpl aplzl.
IF afab_x = cloi_x AND NOT t_aufpl_aufnr[] IS INITIAL.
-> select afab data
    SELECT * FROM afab INTO TABLE t_afab_tmp
      FOR ALL ENTRIES IN t_aufpl_aufnr
      WHERE aufpl_vor = t_aufpl_aufnr-aufpl.
    SELECT * FROM afab APPENDING TABLE t_afab_tmp
      FOR ALL ENTRIES IN t_aufpl_aufnr
      WHERE aufpl_nch = t_aufpl_aufnr-aufpl.
    SORT t_afab_tmp
      BY aufpl_vor aplzl_vor aufpl_nch aplzl_nch aobar mimax.
    DELETE ADJACENT DUPLICATES FROM t_afab_tmp
      COMPARING aufpl_vor aplzl_vor aufpl_nch aplzl_nch aobar mimax.
-> read external order numbers out of data base
    CLEAR t_aufpl. REFRESH t_aufpl.
    LOOP AT t_afab_tmp ASSIGNING -aufpl_nch.
      COLLECT t_aufpl.
    ENDLOOP.
    CLEAR t_aufpl_aufnr. REFRESH t_aufpl_aufnr.
    IF NOT t_aufpl[] IS INITIAL.
      SELECT aufpl aufnr FROM afko INTO TABLE t_aufpl_aufnr
        FOR ALL ENTRIES IN t_aufpl
        WHERE aufpl = t_aufpl-aufpl.
      SORT t_aufpl_aufnr BY aufpl.
    ENDIF.
-> add order numbers to afab data
    LOOP AT t_afab_tmp ASSIGNING -aufnr_nch = t_aufpl_aufnr-aufnr.
      ENDIF.
    ENDLOOP.
-> read operation numbers out of data base
    CLEAR t_aufpl_aplzl. REFRESH t_aufpl_aplzl.
    LOOP AT t_afab_tmp ASSIGNING -aplzl_nch.
      COLLECT t_aufpl_aplzl.
    ENDLOOP.
    IF NOT t_aufpl_aplzl[] IS INITIAL.
      SELECT aufpl aplzl vornr FROM afvc
        APPENDING TABLE t_aufpl_aplzl_vornr
        FOR ALL ENTRIES IN t_aufpl_aplzl
        WHERE aufpl = t_aufpl_aplzl-aufpl
          AND aplzl = t_aufpl_aplzl-aplzl.
      SORT t_aufpl_aplzl_vornr BY aufpl aplzl.
    ENDIF.
-> add operation numbers to afab data
    LOOP AT t_afab_tmp ASSIGNING -vornr_nch = t_aufpl_aplzl_vornr-vornr.
      ENDIF.
    ENDLOOP.
ENDIF.                               "afab_x
--> fill AFAB (relationship information) and status information
SORT t_aufpl_aufnr BY aufnr.
LOOP AT t_afko ASSIGNING .
-> fill order head status information
    IF jstk_x = cloi_x.
      CLEAR t_jstk. REFRESH t_jstk.
      LOOP AT t_jest2 INTO wa_tjest2 WHERE objnr = -t_jstk = t_jstk[].
    ENDIF.
-> fill afab information
    IF afab_x = cloi_x.
      CLEAR t_aufpl_aufnr.
      READ TABLE t_aufpl_aufnr WITH KEY
        aufnr = -t_afab = t_afab[].
    ENDIF.
-> fill operation and suboperation status information
    IF jstv_x = cloi_x OR afvo_x = cloi_x.
      LOOP AT .
        -> read status information of suboperation
          IF jstu_x = cloi_x.
            LOOP AT -t_jstu = t_jstu[].
            ENDLOOP.
          ENDIF.
        -> read status information of operation
          IF jstv_x = cloi_x.
            CLEAR t_jstv. REFRESH t_jstv.
            LOOP AT t_jest2 INTO wa_tjest2 WHERE objnr = -t_jstv = t_jstv[].
          ENDIF.
        -> Read operation for a phase
          IF NOT -pvznr = t_aufpl_aplzl_vornr-vornr.
            ENDIF.
          ENDIF.
        ENDLOOP.
      ENDLOOP.
    ENDIF.
-> collect order numbers
    CLEAR wa_aufnrdone.
    wa_aufnrdone-low = -aufnr.
    APPEND wa_aufnrdone TO lt_aufnrdone.
ENDLOOP.
-> append collected order numbers to global table
APPEND LINES OF lt_aufnrdone TO gt_aufnrdone.
EXPORT gt_aufnrdone TO MEMORY ID 'LOIAUFNRTAB'.
-> free large tables
CLEAR t_jest2. REFRESH t_jest2.
CLEAR t_afab_tmp. REFRESH t_afab_tmp.
CLEAR t_aufpl. REFRESH t_aufpl.
CLEAR t_aufpl_aufnr. REFRESH t_aufpl_aufnr.
CLEAR t_aufpl_aplzl. REFRESH t_aufpl_aplzl.
CLEAR t_aufpl_aplzl_vornr. REFRESH t_aufpl_aplzl_vornr.
-> create idocs
CALL FUNCTION 'CLOI_MASTERIDOC_CREATE_LOIPRO'
       EXPORTING
            opt_sys      = opt_sys
            message_type = mestyp
       TABLES
            order_data   = t_afko
       EXCEPTIONS
            OTHERS       = 1.
-> export already selected order numbers via ranges tab to memory
EXPORT t_aufnr_range_done TO MEMORY ID 'LOI002'.
**MOD-006
IMPORT created_masteridocs_pro FROM MEMORY ID 'YLOI001'.
ycloidownlprot-end_date       = sy-datum.
ycloidownlprot-end_time       = sy-uzeit.
ycloidownlprot-idocs_selected = created_masteridocs_pro.
ycloidownlprot-in_progress    = cloi_false.
insert or update entry (dependant if entry already exists)
MODIFY ycloidownlprot.
COMMIT WORK.
MESSAGE i967(z001) WITH created_masteridocs_pro.
**MOD-006
Update last run date and time
IF p_update = 'X'.
    PERFORM update_last_run.
ELSE.
MESSAGE s000 WITH text-022.
    "Last Run Date and Last Run Time not updated
    LEAVE LIST-PROCESSING.
ENDIF.
INCLUDE rcordf01.
*&      Form validate_last_run_date_time
      text
--> p1        text
<-- p2        text
*FORM validate_last_run_date_time.
IF p_date IS INITIAL OR
    p_time IS INITIAL.
   IF sy-batch IS INITIAL.
     MESSAGE s000 WITH text-017.
     "Last Run date & Last Run Time can not be blank
     LEAVE LIST-PROCESSING.
   ELSE.
     MESSAGE e000 WITH text-017.
     "Last Run date & Last Run Time can not be blank
   ENDIF.
ENDIF.
*ENDFORM.                    " validate_last_run_date_time
*&      Form update_last_run
      text
--> p1        text
<-- p2        text
FORM update_last_run.
CONSTANTS:
        l_c_name    TYPE rvari_vnam VALUE 'Z_PROC_DATE',
        l_c_name1   TYPE rvari_vnam VALUE 'Z_PROC_TIME',
        l_c_type    TYPE rsscr_kind VALUE 'P',
        l_c_numb    TYPE tvarv_numb VALUE '0000'.
Update last run date
UPDATE tvarv SET low = sy-datum
             WHERE name = l_c_name AND
                   type = l_c_type AND
                   numb = l_c_numb.
IF sy-subrc = 0.
    COMMIT WORK.
ELSE.
    ROLLBACK WORK.
    g_run_date = text-015. "#EC
    "Updation of TVARV table failed for ZLAST_RUN_DATE. Update manually
ENDIF.
Update last run time
UPDATE tvarv SET low = sy-uzeit
             WHERE name = l_c_name1 AND
                   type = l_c_type AND
                   numb = l_c_numb.
IF sy-subrc = 0.
    COMMIT WORK.
ELSE.
    ROLLBACK WORK.
    g_run_time = text-016. "#EC
    "Updation of TVARV table failed for ZLAST_RUN_TIME. Update manually
ENDIF.
ENDFORM.                    " update_last_run

How to restrict production order creation for the WBS

Dear Gurus,
Our client is is using PS & PP. So that as per current procedure material required for the particular project will be uploaded into the CJ20N i.e. it will be assigned to the network.
So that on that basis production orders will be created with the transaction co10. But in this case there is no linking between the orders created & quantity required in the project.
So is there any restriction that by using co10 we will be able to create the production order for the material which is enterd in to the wbs with not exceeding the quantity also.
With Regards...
Abhay

Dear Abhi,
But why do you require to create produciton order manually through co10?
Any how you must running MRP in MD51 where in you will get your planned orders which you can convert to production orders!
Thanks.

How to get Production Order wise Actual Values

Dear CO Experts,
How to get Actual Values (Raw Material Issue, Activity Confirmations & OH Calculations & Goods Receipts from Production) each Production Order wise ?
My Scenario is Product Cost Collectors (PCC) with Production Orders.
If we select above scenario Production Order is Statistical and PCC is real cost object.
For PCC is Period wise we can track the cost Periodically in individual Material.
But my client is asking how to see the each Production Order wise Actual values. Is there any T.Code ??
In Production Order I am able to see only Plan values (CO03).
Waiting for your favorable reply.
Regards,
KBR.

Hi Bhaskar
You are in Alaska and you wanna eat vegetarian food
You cant get values at Prod order level if you have chosen PCC as cost object.... You will only get Qty at Prod order level
To get a bird's eye view of costs incurred in PCC, execute report MCRY with PCC as the input... MCRX shows only Qty info for components
br, Ajay M

How to create production order for multiple items having common raw materia

Dear all,
We are running a sheet metal fabrication company at Vadodara Gujrat.
Please guide us how to create single production order for multiple items using single raw material??
For example, We want to produce baby shirt(item code AAA001), shirt with full sleeve(item code AAA002), shirt with half sleeve(item code AAA003),shirt slim fit (item code AAA004),shirt loose fit(item code AAA005) from single raw material say(item code XXX001).
Right now we have to create 5 production order to produce above 5 items of single sales order in SAP B1 though it is made from single raw material which is foolishness and time consuming too. (Please also note that to produce any finfish good item, raw material required for that item may vary every time in our process.)
Kindly guide us how to solve the problem.
Thanks.
RUPESH +91-9227744273
WEB : www.gorasia.co.in

Hi Rupesh Gorashiya,
This is possible through MRP for that you have to put Sales Order first and Run MRP Wizard
MRP Wizard Put Multi Production Order as per Item Taking in Sales Order just click it on and execute.
Thanks,
Srujal Patel

Cannot close Production Order due to cost

Hi experts,
I have a problem with a production order that I cannot close. I have confirmed the order, however instead of cancelling the confirmation, I used MIGO inorder to reverse the goods movement. In closing the order, I encountered an error due to the balance cost for production (labor, power, water, overhead). I cannot cancel the confirmation since it is returning an error which is a deficit in the quantity. This is maybe due to the reversals I have already made for the finished good and components using MIGO. I cannot already repost or cancel the goods movement since the period is already closed.
I really am hoping for your help regarding this so I may already close the order.
Many many thanks.
Sincerely,
Ria

Since periods are already closed in MM, it is not
possible to post into these periods any more. There're two workarounds.
1. If you can close the orders with the balance, change the indicator
   in the settlement profile from 'To be settled in full' to 'Can be
   settled' or 'Not for settlement' temporarily. After you close the
   orders, change it back immediately.
2. Settle the order in KO88 twice with the following parameters:
   1) Settlement period    04
      Fiscal year          2009
      Posting period       06
   2) Settlement period    05
      Fiscal year          2005
      Posting period       06
You can check whether there's cost for the order in table COEP.
For more information, please review attached note 140672.
I hope this will be useful,
best regards
Maria

Cannot close production orders

Hi guys,
When the user tries to close a production order in CO02 , they get an error which says the the purchase order still exists. but as i see in the purchae order , the delivery completed indicator is set.( one thing I can see is : in the invoice tab of item details final invoice indicator is not set) .Does the final invoice indicator has any effect on closing the production order?Please help me .I'd appreciate your help.
Thanks
Cheris T

Hi
Prerequisites for setting the CLSD status for production orders are:
1.The order must have the status Released (REL) or Technically completed (TECO)
2.The order balance must be 0
3.There can be no open purchase requisitions, purchase orders or commitments
4.There can be no future change records from confirmation processes
There should not be any commitments towards the Purchase orders.No more costs can be posted to the order, that is, confirmations and goods movements are no longer permitted for the order.So please complete GR/IR activities for the Purchase orders.
Regards
Ramakrishna

How to bifurcate production order and purchase order

hi all,
is it possible to bifurcate all open production order and purchase order quantity of items.
ex:i have one item like ffp001 it is showing 100 order quantity.but i want only open purchase quantity.i checked (item master data-->righ click--->Avail to promise) its showing open production and purchase quantity.so i need only open purchase quantity.
Plz tell me the process of Bifurcation of open orders.
thanks&Regards,
P.Pratap

Hi,
By default there is no option , as a workaround you can use below method,
Create 2 warehouse , for example Purchase , Production
When ever you create purchase order use "Purchase" warehouse, Use production warehouse in production
In the "Available to Promise" Report you have warehouse filter option.
Using this filter you achieve can achieve your requirement.
OR
Right click "Filter Table"
Document -> Start with-> PO
Now you can see only PO
Refer below image

How to change Production Order Number in CO01

Hi,
I have requirement to change the system provided production order number AUFNR to alphanumeric while creating Production Order in CO01 based on plant(WERKS) and Order Type(AUART).
I have tried using below exits:-
PPCO0006    - no exporting parameter for AUFNR
PPCO0001
IQSM0001     - doesn't getting triggered
But unable to resolve the issue.
Please suggest any EXIT/BADI to meet the requirement.
Thanks,
Mayank

Hi Dengyong,
Thanks for your reply.
My doubt is, Order type is already created in the system and whenever I am trying to change the number range it is asking for 'Numeric type only'. I am trying to do the same through CO82.
We have to change the number range of Order Types which is already created in the system. Is it possible???
Thanks
Mayank

How to close production Order

Similar Messages

Maybe you are looking for