How to close the REOPEN container number in SAP ME5.1

Hi,
I found a issue maybe it is a bug for the 5.1, for the Pack/Unpack activity, when we unpack a container number which has already been closed status, and remove all their SFCs from this container number, and then this container number is changed to REOPEN status, but at this moment, I found this reopen container number has never been able to add any SFCs, and we are also not able to close this container number.
In our system we have a lot of those kinds of REOPEN container number, but if there are any container contained the REOPEN container numbers, we couldn't change any information in the container maintenance, this is our problem, we want to find a solution how to fix this. Any idea of this kind of issue?
Thanks a lot and best regards,
Leon Lu

Hi Sergiy,
I also  would agree the container shouldn't be changed from the logic perspective if it has the OPEN/REOPEN container number, but here are the scenario why we want to change them:
1. We use this pack/unpack function more than 4 years, we define the containers nearly without any limitations, because we select the pack level as Item, but put the pack value as * as well as shop order as *, which means, as long as users select this container, any available SFCs are able to be packed into this container. Recently we investigated out a few more powerful functionalities with your pack/unpack function, like, we can define the specific item numbers, so now users want to use this functionalities;
2. Because in the container maintenance, we need configure the documents which will be used by this container for label printing, but our customers request to change the label templates, we create a new document but we found it is not possible to modify in the container maintenance.
Creating a new container is a choice for us, but the problem is, the old one is still open, we can't delete/disable/hold (actually this is our purpose) this container because there are a lot of REOPEN container numbers, thus users are still able to select this container (actually it is  invalid) and pack SFCs into this container.
As far as I identified, the ME5.2 doesn't have this limitation, I am curious that what the purpose you changed this logic in the new product, and how did you handle the logic what you have described:-)
Thanks a lot and best regards,
Leon Lu

Similar Messages

  • How to update the customer part number in SAP as customer parts.

    Hi MM Gurus,
    Our client has customer parts at their shopfloors and they need to update those parts as customer parts. Please advise how to do it in SAP.
    Thanks and Regards,
    Madelyn

    Hi,
    You can receive Customer provided parts in your Shop Floor in MIGO. Here use movement type 501 and do Goods Receipt > Others.
    Also Create your customer materials as non valuated material, because these materials not effecting the our inventory. And also create a separate storage location (in OX)9) for the Customer and do GR in this location, this will give tracking of Customer's Stock.

  • Re:How to close and reopen a document immediately?

    Original Message available here:<br /><a href="/webx?14@@.3c055358">Dave Sykes, "How to close and reopen a document immediately?" #, 15 Nov 2007 4:46 am</a><br /><br />> Dave Sykes - 04:46am Nov 15, 2007 Pacific<br /> I would like to close a document and then immediately afterwards open it up again.<br />The documentation says "To process a command to close the document immediately, use IDocumentCommands::Close'', but it also points to SDKLayoutHelper::CloseDocument which uses IDocFileHandler::Close.<br />If I use IDocumentCommands::Close the close succeeds, but InDesign unexpectedly quits when it regains control.<br />If I use IDocFileHandler::Close then when I reopen the document I get the assert ``Calling SelectionExtentionRegistry::Initialize more than once!'' This is the same error I get by not closing the document at all.<br />I have also tried ProcessCommand(Utils<IDocumentCommands>()->CreateCloseCommand(docUIDRef)), but this also crashes InDesign when it regains control.<br />In all cases I am calling ProcessCommand(CmdUtils::CreateCommand(kCloseLayoutWinCmdBoss), as otherwise I get an error that the document is still referenced on close.<br />Is it possible to close all the layout windows and also close the document, so that it can be reopened immediately? <br /><br />I had the same issue and tried to solve it by closing all windows in the document's IWindowList and then calling IDocFileHandler::Close() with IDocFileHandler::kProcess to process the command immediately instead of scheduling it.<br />Unfortunately this still resulted in a crash.<br /><br />Eventually I got around it by adding the following line before re-opening the document:<br />CmdUtils::ProcessScheduledCmds (ICommand::kLowestPriority);<br /><br />This forced InDesign to completely close the document before re-opening it again.<br /><br />Hope this helps someone else too. :)<br /><br />- Jackeen

    I am having the same problem with InDesign CS4 version,
    I have tried the following:
    IDocFileHandler::Close() //with kSchedule command
    CmdUtils::ProcessScheduledCmds();     //Results into crash
    IWindowList::CloseAll()
    IDocFileHandler::Close() //with kSchedule command
    CmdUtils::ProcessScheduledCmds();     //Results into crash
    IDocumentList::CloseAll()
    IDocFileHandler::Close() //with kSchedule command
    CmdUtils::ProcessScheduledCmds();     //Results into crash
    IPresentationList::CloseAllPresentations()
    IDocFileHandler::Close() //with kSchedule command
    CmdUtils::ProcessScheduledCmds();     //Results into crash
    is Three anything else that could work.
    Thanks and Regards
    Saurabh Singhal

  • How to close the Scheduling Agreement

    how to close the scheduling agreement
    means i don't want to procure the material any more against the Scheduling agreement.

    Abhishek
    Please follow the below procedure.
    You block items in Schedule  agreements to prevent release orders or delivery schedules (in the latter case, including SA releases) being created against the agreement. For example, you may want to block an item if a vendor has delivered goods of poor quality.
    Procedure
    1.     Choose Schedule agreement &#61614;&#61472;Change.
    2.     Specify the number of the outline agreement. Then press ENTER .
    3.     Select the item(s) you wish to block. Then choose Edit &#61614;&#61472;Block.
    The system inserts an S in the column D, indicating that the item is blocked.
    To unblock the item, select it and then choose Edit &#61614;&#61472;Reset deletion indicator.
    4.     Save the agreement.
    or
    You can delete the item in schedule agreement
    Thanks & Regards,
    Sridhar

  • HT201304 Visa has changed for the purchase of Apple products, i did not know how I put the new MasterCard number to finish the process of buying products Thank you

    Visa has changed for the purchase of Apple products, i did not know how I put the new MasterCard number to finish the process of buying products Thank you
    i have ibad mini
    and iphone4
    laptop sony
    can you sent for me the anser

    Changing Account Information  >  http://support.apple.com/kb/HT1918

  • How to close the detach popup on click of a button in the panel collection

    Hi,
    I'm using Jdeveloper 11.1.2.3.0.
    I have an af table surrounded by panel collection. There is a button on panel collection to commit the changes in the table.
    Clicked detach button to view the table in full browser.
    On click of Commit button, the detach popup is not closed. I have set partialSubmit of that button to false. Then also detach popup is not closed.
    Can anybody suggest me how to close the detach popup on click of a button in the toolbar.
    Thanks,
    Vinod

    Hi Frank,
    Thanks for your response. Popup is not closed.
    I tried this approach, when the view tree is navigated on the Detach, I see that the tree is same as if it is traversed on the page without detach.
    Printed client id and UI component class in the while loop, result is as below.
    r1:0:pc1:t3 class oracle.adf.view.rich.component.rich.layout.RichToolbar
    r1:0:pc1 class oracle.adf.view.rich.component.rich.output.RichPanelCollection
    r1:0:ph2 class oracle.adf.view.rich.component.rich.layout.RichPanelHeader
    r1:0:pgl1 class oracle.adf.view.rich.component.rich.layout.RichPanelGroupLayout
    r1 class oracle.adf.view.rich.component.rich.fragment.RichRegion
    pgl1 class oracle.adf.view.rich.component.rich.layout.RichPanelGroupLayout
    db2 class oracle.adf.view.rich.component.rich.layout.RichDecorativeBox
    db1 class oracle.adf.view.rich.component.rich.layout.RichDecorativeBox
    psl1 class oracle.adf.view.rich.component.rich.layout.RichPanelStretchLayout
    ps1 class oracle.adf.view.rich.component.rich.layout.RichPanelSplitter
    f1 class oracle.adf.view.rich.component.rich.RichForm
    Tried with setting partialsubmit property to false on the command button, still the popup is not closed and my Faces Message are shown behind the detach popup.
    Thanks,
    Vinod

  • How to get the current month number

    Hi everyone,
    Does anybody know how to get the current month number in Oracle Discoverer Worksheet calculation?
    I try to use EUL_DATE_TRUNC(CURRENT_DATE, 'MM'), but instead I got 01-AUG-00.
    If I change the data display format to MM, it will give me "08" but if I use TO_NUMBER function to convert it to number I get error "invalid number"
    Is there anyway to get the current month value in number? Thanks

    Scott,
    Thank you so much! It works perfectly! :)
    Hope you have a great day ahead!
    Cheers,
    Angeline

  • How to know the total page number of the standard report

    How to know the total page number of the standard report?
    If I insert a graph, a table, or text into the end of the standard report, how to know how much space is left for the current page?

    Hello Net,
    Unfortunately, we do not have any VIs in LabVIEW that can figure out the number of pages of a standard report. However, with the use of ActiveX calls you can achieve this task. Here are a couple of discussion forums which discuss this:
    Excel Page Numbering with ActiveX:
    http://forums.ni.com/ni/board/message?board.id=170​&message.id=194479&requireLogin=False
    Number Pages in Word Report:
    http://forums.ni.com/ni/board/message?board.id=170​&message.id=162972&requireLogin=False
    There is also great documentation on using ActiveX on msdn. You can search this document for page number objects. Here is a link to this:
     http://msdn2.microsoft.com/en-us/library/aa223048(​office.11).aspx
    Please refer to these links. If you still have questions please feel free to let us know so we can assist you.
    Thank you
    Best Regards,
    Dominic L.

  • How to get the unoccupied material number in a number range

    How to get the unoccupied material number in a number range.for example, I wang to get a number between 1500000 and 1599990 which is unoccupied as my material number to be created. Is ther any FM or codes?

    Dear,
    You can get this information from Tcode SNUM or you can access database table NRIV.

  • How to track the transport request number for the Role/Composit Role

    Hi,
    How to track the transport request number for the Role/Composit Role.
    Thanks,
    Ravi

    Use transaction SE03 Transport Organizer Tools
    Execute "Search for Objects in Requests/Tasks" with objects of types:
    R3TR     ACGR     Role
    R3TR     ACGT     Role - User assignment
    Regards

  • How to get the 4 digit number associated with a SAP icon ( ICON_MAIL )

    Hi Friends,
                   Could anyone please tell me how to get the 4 digit number associated with a SAP icon ( ICON_MAIL ).
                   eg: - For ICON_GREEN_LIGHT the four digit id code is '@08@' (which you can get from ICON table )and the associated 4 digit number is'1003'.
                  Similarly I want to get the 4 digit number for ICON_MAIL(e-mail icon)
    <b><REMOVED BY MODERATOR></b>
    Ashiq
    Message was edited by:
            Alvaro Tejada Galindo

    You can use this report...It's not mine...
    REPORT zdummy_atg_2.
    TABLES: ICON.
    INCLUDE <ICON>.
    FIELD-SYMBOLS: <F>.
    SELECT * FROM ICON.
       ASSIGN (ICON-NAME) TO <F>.
       WRITE:   /(5) <F>, 20 '@',21 ICON-ID+1(2),23 '@',ICON-OLENG,
                ICON-BUTTON,ICON-STATUS,ICON-MESSAGE,ICON-FUNCTION,
                ICON-NAME.
    ENDSELECT.
    Greetings,
    Blag.

  • How to transport the data contains in the table from development to product

    How to transport the data contains in the table from development to production.
    Please let me know ASAP.

    Hello Dilip
    Create a workbench request and add the following entries to the request:
    Object key: R3TR TABU <name of z-table>
    For this object add the following value key:
    - client-independent table: '*'
    - client-dependent table (e.g. client 100): '100*'
    See also: [SAP Network Blog: Transport Table Entries|/people/community.user/blog/2007/01/07/transport-table-entries]
    Regards
      Uwe

  • How to pull the Sale order number(sales document) to Accounting document

    Hi Gurus,
    How to pull the sale order number to the accounting document.
    Is any configuration needed to this.
    When i run the FBL5N Repoprt ,Sale order number (Sales document) is not getting updated to accounting document.It is diplaying as blank field.
    Thanks you.

    Hi Shivaji,
    In order to display the Sales document in the customer line item report, you need to add it as a special field thorugh customizing settings.
    Path - SPRO - FA-GL Accounting - GL Accounts - Line Items - Define special fields for finding and sorting data and in that select the table BSEG-and field VBEL2 (Sales document) and save/
    This will work. hope this helsp
    regards,
    radhika

  • How to identify the Selected row number or Index in the growing Table

    Hi,
    How to find the selected Row number or Row Index of growing  Table using Javascript or Formcalc in Interactive Adobe forms
    Thanks & Regards
    Srikanth

    After using bellow script it works fine
    xfa.resolveNode("Formname.Table1.Row1["this.parent.index"].fieldname").rawValue;

  • How to fetch the VAT registration number of the ship to party from billing

    Dear SDN Team
    How to fetch the VAT registration number of the ship to party from the billing document.  Can you proide some information for fetching the VAT registration number of the ship to party.
    Normally only the payer VAT registration number will be displayed in the Invoice.  But in my case the Ship to party VAT number is displayed. 
    I have resolved this problem by doing the customizing setting in order to have the payer vat registration number.  But for the Old Billing documents it is more than 30,000 documents where it was printed with the ship to party VAT number.  So i need to identify those documents.
    Can you please help to resolve this problem.
    With Regards,
    Jai

    Hi,
    To get VAT from the ship to from Billing, You have to first fetch the BILLING NUMBER from the VBRK and then goto the Document flow in VBFA to get the SALES DOCUMENT NUMBER and with sales document you will get the SHIP TO number from the VBPA with the PARVW = SH
    Once you got the SHIP TO , then goto the KNA1 and get the VAT ID in the field STCEG
    so the logic will be as follows
    VBRK---VBELN and then
    VBFA--VBELN with the document Category as C
    VBPA-VBELN and get the  KUNNR with PARVW =SH
    Now with KUNNR ( ship to ) get the VAT ID from KNA1-STCEG
    regards,
    santosh

Maybe you are looking for