How to close web content overlay

This is probably a simple fix, but I haven't been able to find it and don't know HTML very well.
After loading a web content overlay, we would like to include a button that lets the user exit back out to the page they originated on.
Right now, we us a navto to go back to the specific page, but now the same overlay will be used on several pages of the folio, and we need the user to be able to go back to the exact page they came from.
Is there a simple "close" command we can use instead of "navto"?
Thanks.

I'm not aware of an easy way to "close" an activated Web Content overlay. I suppose you could display the web content in the in-app browser using a Go To URL link. Users would tap a button, view the HTML contents in the in-app browsers, and then tap the Close button. But that might not work for your design. Another possibility is to put the overlay in an MSO state that includes a button that switches to a different state. Again, it depends on your design.
You can report feature requests here: www.adobe.com/go/wish

Similar Messages

  • How to fit HTML into a web content overlay?

    How can I fit a 640px x 960px HTML generated from Adobe Animate into a Web content overlay with 640x x 960x dimension graphic frame?
    When I uncheck the "scale content to frame" option, the HTML was scaled up--cropping 3/4ths of the image. But with the scale content frame option selected, the HTML was scaled down showing the whole image but on a 1/3rd scale.
    The article format is set to PDF.

    I assume you mean Edge Animate.
    What version of ID? Did you fully patch Edge to 1.0.1?
    If you have CS6 you can just place the OAM file.
    Bob

  • DPS - Web Content Overlay. How to implement dragging action in .folio?

    Hi there
    I am building a huge project, some kind of encyclopaedia with multimedia and interactive content I created using both Tumult Hype and Adobe Edge Animate 1.0. They are perfectly well loaded onto their own respective Web Content Overlay and work almost perfectly.
    One of them is a draggable game in which you drag a man towards one side or another just to see how it inclines. I have tried it in many browsers and it simply works perfectly well. But, when I bring it into the inDesign document (into a MSO) I can't drag the man, as the ACV changes the page.
    What can I do? Is there any way of avoiding this default behaviour when using these interactive content?
    Best regards,
    Luis Santa-Maria

    Ok, thanks for not answering anyway.
    I have managed to get the solution by myself. I just put a e.preventDefault(); function when dragging, and it just worked.
    Thanks again to all those who didn't help and knew how to do it.
    Best regards

  • Short of dismantling and recreating a page how do i find out whats causing [Error: Invalid URL for Web Content Overlay]

    Hi,
    i received an indesign file to include in a folio that had links to the creators desktop where they had the assets for the web content overlay. When i try to update the folio i get the error message:
    "Content generation error.
    [Error: Invalid URL for Web Content Overlay]"
    Which is fair enough.
    The problem is, i have gone through and changed all URLs that I can see, but there is one somewhere, that I just can't find.
    Is there a way to get a list of all web content overlays in a particular file? otherwise i will need to recreate the whole page again, and it has some pretty complex interactions which i rather wouldn't do.
    I also cannot ask the original doc creator to just change the links as i'm sure he'll have the same issues as me, at not being able to track down the erroneous link.
    The problem I have with DPS is that its not very transparent. you'll have to click on everything, and into every group to see what actions are on it, which can be extremely time consuming and frustrating when complex interactions are included.
    thanks in advance for any assistance

    I’ve found watching the process helpful to narrow down the page.
    Working off a duplicate of the file, delete one layer at a time until you figure out what layer the problem is on.
    From there it’s a bit easier to narrow down.

  • How to make a VR html file autoplay via the Web Content overlay

    Hello,
    We have created a VR using Object2VR and have loaded the .html file via the Web Content Overlay panel in InDesign CS5.5.
    We want this VR to play automatically on page load, so we have checked the box 'aut play' in the Web Content overlay panel, but it won't play automatically.
    We've tried switching the auto play off in Object 2VR and switching it on in the Web Content overlay and vice versa and also with both on, but still we cannot get it to autoplay.
    Any suggestions? Is this a bug?
    thanks,
    AG

    DPS is no longer supported in 5.5 you need Indesign 6 or Creative Cloud.
    Set you auto play delay for the web overlay to something other than zero seconds, 0.125 works, if it is set to zero seconds. Leave the auto play enabled for the VR.

  • How can I use cookies in Web Content Overlays?

    I have a survey created with Google Docs. It uses cookies to tell if a user has already submitted an answer to a survey.
    It seems to me that these cookies are not stored with web content overlays (I've used the direct URL to the survey as input).
    Am I right? Is there a way to make the cookie thing work?
    br, Simon

    Hi,
    Is this procedure still available in 9iAS and RDBMS 8.1.6 ? I am trying to get it to work, and I keep getting "ORA-00942: table or view does not exist". The owner of this package is "SYS". I even tried prefixing the table name in the SQL string passed to calendarprint with the owner, and it still gave me this error. Does this have anything to do with the invoker rights model ? I need to set up a web calendar and would love to use this functionality...
    What gives ?
    Any help would be appreciated.
    Thanks you

  • Invalid URL for Web Content Overlay. Help?

    I am doing a french tranlation to an existing folio app that someone else created.
    There is one page in my folio that is comprised of garbage and a trash can. You touch the garbage and drag it into the trash, and things change, etc.
    I have an index.html file and a bunch of other images.
    I can't even successfully add the article to my folio, I get this warning: Content Generator Error. Invalid URL for Web Content Overlay.
    Can you walk me through how to get this to work?
    Attached is a screen shot of my file structure...

    When you specify the .html file, all the content in that folder is uploaded automatically. Here's an article about Web Content overlays:
    http://help.adobe.com/en_US/digitalpubsuite/using/WS9293e1fb3b977c5c73657495129f66e490f-7f fa.html
    And here's an article and video about HTML articles:
    http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60530cf39c12f5fcd6d46-80 00.html

  • Web Content overlay crashing! Help?

    Everytime I try to use the Web Content overlay, InDesign CS 5.5 crashes. Working in Mac OS 10.6.8, for what it's worth.
    I have a local html file that should display an RSS feed. When I try to bring it into my InDesign file with the Web Content overlay, everything seems fine until I try to save or preview; that's when InDesign spins and spins and spins until it crashes. I've tried much simpler html (just a black box that should appear on the screen) just to test, but it still won't work.
    Here are my steps:
    1. Create local html file and test in browser. No problems.
    2. Within InDesign document, create bounding box to exact size or larger of what the html file will take up. No problems.
    3. Using the Web Content overlay, choose my local html file to go in the box. Autoplay on. No problems.
    4. Preview or save. CRASH.
    Am I doing something wrong? Is anyone else having this issue? Help?

    I have been getting exactly the same thing happening. I worked on this months ago and gave up eventually.
    I tried again yesterday and after a few crashes I got this to work. Not sure exactly what fixed it as I tried many things but here is a rundown. I did get multiple crashes but persisted this time.
    I made a new document to house my animation, it was 200 x 400 pixels (size does not matter as long as its consistent - see further on).
    I created the animation in Indesign CS 5.5 and tested. Once I was happy I exported the FLA into a folder. Not sure if this helped in any way but I moved the Indesign doc into the same folder.
    I used Wallaby to point to the FLA and converted it into HTML5 and saved all the elements into the same folder. I dropped the .html onto the browser and it worked fine.
    I then drew a frame in my Indesign doc exactly the same size as previous, ie 200 x 400 pixels (again not sure if this had any effect on fixing the issue but it worked for me). I used overlay creator/web content to point to the .html file. I saved the folio and uploaded it to DPS.
    When I checked this on the iPad it works fine.
    Again, not sure how or what exactly fixed this but it works.
    Could just be that the more you try it the less it crashes and eventually works. :-s
    Hope this helps.

  • Can't interact with Web Content Overlay when article is zoomed in

    I have a problem with Web Content Overlay. It's working (interacting) only when article is viewed in 1:1 scale. Articles are added as PDF's, and when i do pinch zoom on them - Web Content Overlay stops reacting on click events.
    Is it a general WCO limitation?
    Can article with Web Content Overlay be zoomed in and still give user the ability to play with HTML content?
    Piotr

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Web content overlay: that blasted spinning wheel

    OK,
    I need some pointers.
    I am placing in animations made with Adobe Edge and they look good, however, onload you see a spinning wheel until the content loads in. I am looking to disable that spinning wheel.
    How do I do this?
    How does The Wired magazine do it? How do they have visusally rich content without that blasted wheel?
    All and any help, gratefully received!
    Billy.

    I figured out a way of hiding the spinning wheel, but it's a bit dodgy in a round-about way... It would be great if DPS can actually give us the option of disabling this feature.
    I placed the Web Content Overlay object (that contains the HTML file) into an MSO. The first State is a blank object and the second state is the object that contains the HTML file.
    My settings for the MSO is:
    Tick: Autoplay
    Delay: 0.5 sec
    Interval: 0.125 sec
    Play: 1 time
    Tick: Stop at last image
    Tick: Cross Fade
    Speed: 1 sec
    Export Format: Vector
    My settings for the Web Content Overlay is:
    Tick: Autoplay
    Delay: 0 sec
    Tick: Transparent Background
    Tick: Allow User Interaction
    Let me know if this works for you too!
    (But please Adobe, please give DPS the option of disabling the spinning wheel).

  • Web Content Overlay Link to the HTML Resources

    Hi guys,
    Does anyone know what should go inside of "URL or File" field for the Web Content overlay if I need file from the HTMLResources.zip?
    DPS documentation is very unclear/confusing (e.g. there is no ".html" at the end):
    For the file inside of HTMLResources.zip with this path:
    HTMLResources.zip/Cartoons/train1.html
    Documentation (https://helpx.adobe.com/digital-publishing-suite/help/hyperlink-overlays.html#link_to_asse ts_in_the_html_resources_folder) has:
    Web Content overlays are nested two levels deeper than an HTML article. Example:
    <a href=”../../../HTMLResources/Cartoons/train1”>See Train Cartoon Gallery</a>
    I'm getting an error "File URL for web content is missing or does not exist" if I enter this inside of the "URL or File" field:
    ../../../HTMLResources/Cartoons/train1
    Thank you for your help,
    Gennady

    Thank you, joev and Bob,
    Update to the text below: I just realized that documentation explains how to call some file from the HTML content of the Web Content Overlay, not how to get the HTML content inside the Web Content Overlay. I can probably do redirect to the train1.html from plain HTML code inserted into Web Content Overlay. So there is no way to use link to the file as for the http://webServerPath/Cartoons/train1.html?
    We have 1 html file that uses 1 image file, both files inside the folder inside HTMLResources.zip and I need to display that html, so:
    HTMLResources.zip/Cartoons/train1.html
    HTMLResources.zip/Cartoons/train1.png - referenced inside train1.html
    If I use http URL, e.g.
    http://webServerPath/Cartoons/train1.html
    then everything works, if I try to set that URL to the HTMLResources:
    ../../../HTMLResources/Cartoons/train1
    or
    ../../../HTMLResources/Cartoons/train1.html
    I'm getting an error, even documentation explains what link should be used.
    Workaround when we just use the local HTML folder also works.
    Thank you!

  • HTML Web Content overlay - Android

    Hey guys,
    I am having an issue with a HTML Web Content overly swipe gallery with Native Android viewer.
    The overlay is the second state of a MSO. The HTML is working as it should, but the 'close' button on the the second state that should make the MSO go to the first state doesn't work.
    It is like the web content overlay is sitting on top of the DPS button. Everything is working in iOS.
    Any ideas or known issues with Native Android viewer and HTML overlays???
    Cheers,
    Nathan

    You'll need to look at alternative solutions on Android if you want to get content out now. It's not an easy change to make due to the nature of HTML on Android and will take us some time to figure out what to do, or if it's even possible to resolve.
    Neil

  • Link from Web Content overlay to another article

    Thinking caps on, guys. I am trying to reduce the overall size of a folio that contains a pop-out panel (a two-state MSO) that reveals image thumbnails in a vertical scrolling content frame. Each thumbnail is a button that takes the user to another article in the folio. The panel is repeated across all articles, which is handy for the user but wasteful in file size.
    In theory, I ought to be able to reduce the file size of the pages containing these panels if I was to replace the vertical scrolling content frame with a tall Web Content frame that would point to an appropriately designed HTML doc in HTMLResources.zip. This would minimise repetition of all those thumbnails.
    The problem, if you haven't already guessed it, is that DPS does not allow you to link from a Web Content overlay to folio articles. The 'navto://' convention simply won't work in this scenario.
    Is there ANY way to jump a Web Content frame to other locations in the folio? A non-standard, non-supported workaround would do me just fine.
    Thanks for reading this far.
    Ali

    Ali - Check out the new "Linking" article in the Advanced Overlays issue of DPS Tips. It explains how to use an unsupported method for cross-folio linking. I explained how to create buttons with this format, but the same format would work using <a href="URL"> in HTML.
    Johannes also breaks down this method here:
    http://digitalpublishing.tumblr.com/post/26564811021/cross-publication-linking-bonus-qr-co des

  • Why am I getting the flag Invalid URL for web content overlay when making scrolling panel in Indesig

    Why am I getting the flag 'Invalid URL for web content overlay" when making scrolling panel in Indesign? Iam making additions to existing articles but the problem is new. The articles were originally made using CS and now I am on CC, which I have just uninstalled and re installed, no difference, can anyone help please? Steve

    Hi Bob, thankyou very much for coming back on this. The flag is coming up towards the end of the preview process on desk top. I have made dozens if not hundreds on my two published apps on the app store, but have not done an update for nearly a year, in which time I have needed a refresher, and as usual went to Lynda. In this case I have followed to the letter your DPS course, which is great, and I found the process of making the scrolling panels somewhat easier than when I started 2-3years ago. Initially I was mystified that the flag talked about url and web content, but just put it down to something I had missed in recent improvements in CC.
    I tried over and over, but always got the same result. I thought at one point it might be because the content of my slide was copy and photo, so for a test I deleted the photo. Same result, and many of my existing slides are copy and picture.
    I also uninstalled Indesign CC and reinstalled in case of corrupted content, I also copied to IDML and relaunch, same problem. I am sure I have made the scrolling content as instructed, The one thing I havn't done is trash my preferences, if you think that would be a good Idea could you please direct me to some content at Lynda on how to do it in CC. Many thanks, Steve

  • "Web Content Overlay" Equivalent???

    I am looking for a solution to the equivalent of DPS's "Web Content Overlay".
    Is there a way to have an active web feed displayed in a window that works for epub?
    I understand the downside of people excepting an ePub to be self containing but we are trying to use ePub as a replacement to DPS which has this feature.
    Google searches have not revealed any good leads as of yet.
    Any suggestions would be appreciated.
    Thanks,
    Ryan.

    Trying to incorporate a single webpage that shows realtime price changes in a window on the page that would not have to be clicked to be viewed or that would take you out of the ePub opening in a web browser.  Im just not sure how to create that window to show the webpage in.  In DPS you would use the "Web Content Overly" button/panel.  But that won't work here.  I was looking at iFrame options but still not sure how to proceed with that within Indesign either.
    Thanks,
    Ryan.

Maybe you are looking for

  • White screen at reset.  Won't start up with install disk.

    White Screen persists on restart. Folder with ? appears after a few minutes. Tried safe start - nothing. Tried RAM reset (option, cmd, p, r) - nothing. Tried to restart with C key to use install disk, C drive powers and spins for awhile - nothing. Th

  • Store models - low resolution displays

    Has anybody else noticed how at certain retailers (I was at CompUSA) the 14" iBooks seem to be set to a lower resolution than normal. I thought I was seeing things, but I took my own iBook out of my backpack, and the text overall was smaller and shar

  • Abt ale and idocs

    hi gurus     how can i specify the mode port packet  size and all these things in partner profile. with thanks aru.

  • Windows 7 sees the 3GS (like a camera), but iTunes can't!

    So i finally get to upgrade from my crappy, beat-up iPhone 2G, which worked perfectly on my Windows 7 32-bit HP Mini, and bought an iPhone 3GS 32gb v3.1.2. The problem is, when i synced it, it was only recognized as a camera/ usb and not in iTunes. I

  • More Photo Booth effects

    Hey there! Just wondering if there are there any other effects to add to photo booth out there? I haven't found any on a quick google search. Thank you for the information!