How to club the amount field for the particular customer from file

Hi ,
In my BDC i am getting the Amount field which is need to be put in the Header data . For 1 Customer there are more than 5 line in amount field in the Excel file.
For the Particular Customer , I need to club all the amount ffield and put it into the Heade data for the customer.
How to do this .
Thanks

got answer

Similar Messages

How to upload the data for the z fields for the delta upload

Hi Exports,
I have the Z fields for the data sourse 2LIS_05_Q0ITEM. when doing any changes in the R3 system,the changes for the Zfileds are not uploded through delta upload.
Anybody plese suggest me to upload the changes.
Thanks,
Krishna

Hi krishna,
see....have u activated that DATA SOURCE or not? if not activate that DATA SOURCE and have u written any code to that Zfields in RSAP0001?
Regards
chandra sekhar
Edited by: chandra sekhar on Nov 11, 2008 12:47 PM

Retrieve the sales orders for a particular customer in selection screen

Hi
I want to retrieve the sales orders for a particular customer(entering customer number field in the selection screen and then clicking on f4 help on sales order field in the selection screen I should get only sales order numbers for that particular customer number).How can I achieve this through search helps?Are there any standard search helps that I can use.
<removed_by_moderator>
Edited by: Julius Bussche on Apr 9, 2009 12:55 PM

Hi,
try this:
at selection-screen on value-request for p_par.
select * from vbak
into itab
where kunnr = p_par.
then use the FM 'F4IF_TABLE_VALUE_REQUEST'.
with
retfield = 'VBELN'
dynprog = sy-repid
dynpnr = sy-dynnr
dynprofield = <name of parameter>
value_org = 'S'
tables = itab.
Regards,
Leo.

Disable input (Grey color) for the Amount field for TANN item category item

Hi All,
I want to disable the input of pricing field in Sales tab in VA01/VA02 for the TANN item category line.
Now I can ZERO the pricing field, but cannot disable the input.
Please help.
Thank you very much.
Terry

I've done by User Exit MV45AFZZ
form userexit_field_modification.
Thanks.

To find the input fields for the given technichal names .

Hi ,
This is for the transaction SU01.
I have some technichal names for some fields in this transaction,
CODVN
BCODE
GUIFLAG
LIC_TYPE
REF_USER.
I want to find out the input fields in this transaction which correspond to the respective technichal names mentioned above.
How should i do it?

Hi,
Go to SU01 Tcode and press F1 on the fields you get the Pop-up and then click on the Technical Information...you can find the details of the fields,.....

What is the b2b setup for identifying TP names from file name in Inbound tx

Hi,
I am using B2B 11g version and documents of type ANSI-X12. I am working for Inbound Transaction and using Generic File protocol in Listening channel.
File format is : %FROM_PARTY%_%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%.dat
How can i make B2B to identify Trading partner names from the file name once the remote trading partner put the file in the specified path with the specified format "%FROM_PARTY%_%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%.dat" mentioned in the delivery channel.
Now B2B is identifying Trading partner names from the Interchange Sender ID(ISA06) and Interchange Reciever ID(ISA08) of the ISA Segment. Please help me , how to make B2B to identify the trading partner names from the file name instead of from identifiers coming in ISA Segment.
Thanks,
Sridhar Rachumallu

Hi Anuj,
1)Now i am giving the file name for inbound documents in the format of "%FROM_PARTY%_<UniqueNumber/Timestamp>.dat" . But still B2B Identifying the TPNames at runtime from the ISA Segment elements ISA06 & ISA08 element values. I want to make B2B to identify the TPNames at run time from the file name instead of from ISA Segments.
Please tell me how can i do these?
2) I am giving exact Remote Trading partner Default Identifier Type 'NAME' value for "%FROM_PARTY% in the file format and i want B2B to identify the TP name at runtime based on the value of "%FROM_PARTY%" . If the value of "%FROM_PARTY%"is matching with any one of the Trading partner Default Identifier Type 'NAME' value than it should go for furthur else B2B should through error as " the TP name unable to found".
3) Please tell me how B2B Identify trading partners at runtime in the business case given below
- Inbound Transaction from remote TP to Host TP
- Document protocol is 'ANSI-X12'
- Listening channel protocol is 'Generic File'
This is very urgent.. Please give the reply As soon as possible.
Thanks,
Sridhar.rachumallu
Edited by: [email protected] on Jun 9, 2010 12:45 AM
Edited by: [email protected] on Jun 9, 2010 1:01 AM

How to include a new field for checking duplicate customer master

Dear All
we have activated the standard procedure to check duplicate customer master data. This is a standard procedure as below :-
Procedure:
Run SM30, key in Table V_T100C, select Display or Maintain, set App area F2. Here you can change current settings.
Check the transaction OBMSG for application area F2, where these messages are maintained and at this place you can convert the message from warning to error.e user needs one more field to be added to this check.
It is working perfectly fine but it only compares two fields for duplicates in the customer master i.e the customer city and name.
Is there a way to include a new field in this procedure ? For example we also want the system to check duplicate entries for field name " street 5" and give a warning /error message incase if there is another entry already existing on the master data.
regards,

Hi
Use the enhancement SAPMF02D to check these values.
Regards
Eduardo

How to insert a sev lines in the comments field for the Nc detail report?

Hi,
I have tried to send in comments in the Nc log via soauip interface to SAP, but i'm only managing to get all the text in one long line. Is it possible to divide the text to several lines?
Br,
Mattias

Sandeep is correct. I don't have time to tell you the correct query, but mine is something like this based on Sandeep's information:
SELECT rsh.receipt_num
FROM   rcv_transactions      rcvt,
       po_lines_all          pla,
       rcv_shipment_headers rsh
WHERE rcvt.shipment_header_id   = rsh.shipment_header_id
AND    rcvt.PO_LINE_ID          = pla.PO_LINE_ID
AND    pla.item_id              = (select distinct inventory_item_id
from mtl_system_items
where segment1 = '1216107-2')

When entering credit card details, is the date field for the start date or expiry date? [was: payment]

I had my bank card accidently cancelled by my bank. I have entered the new card number into payment section and it is asking for a date. Is that date the time the card began or finishes - the section does not make is clear. Thanks

I know of no banking or credit company on the planet that would ever ask or need to ask about the "beginning" date on a crdedit or debit card.
I'd have no way of replying to such an absurd question if I were ever asked.

How can i find out field for a particular component type

hi,
how can i find out for particular component name is belongs to this field.....that means REF_DOC_NO componemt is belongs to xblnr field ..../.if we know only component type ...how to find the field...
plz tell me
thanks&regards,
kalyan

keep the cursor on component
press F1
select technical information
you will find the field name and table or structure name
regards
sateesh

How to select this field for the extractor?

Hi Gurus, I hope you are fine!
I need to extract the field     PRED_OPPT_GUID   form the Data source 0CRM_SRV_CONTRACT_H inside CRM system.
If I go inside CRM to:
Transaction SBIW -> Settings for BW Adapter -> Maintain DataSource and Enhance BW Adapter Metadata ->
tipe "0CRM_SRV_CONTRACT_H" and press change buttom -> Mapping TAB
there I can see the field I need "PRED_OPPT_GUID" but this is not selected at the "BW Selection" Column , I guess this is the cause why I am not receiving this field from the extractor, Am I right?
If yes, How can I select this field for the "BW Selection" Column? (the system does not allow me to click it directly)
if not, what is the proper procedure if I need to extract this field ? because this is the key field for the DSO
" Service Orders: Header Data "
Thanks

This is what i can see inside the ROOSFIELD table:
Filtered by data source = 0CRM_SRV_PROCESS_H
Comparison with another field:
BILL_TO_PARTY (working properly)    columns:        SELECTION = X              NOTEXREL= Y
PRED_OPPT_GUID (Not working)           columns:        SELECTION = (Empty)    NOTEXREL= Y
I think that if I try to change the Selection field to X it will cause inconsistencies with the SMOXRELP table am I right ?
I tried to change using the system and not directly into the tables, but thaere was an inconsitecie between these 2 tables.
Why is no able this field taking into account that this is the KEY FIELD inside the standard DSO? it has no sense to me.
What do you think?
regards.

How 2 add text (BSEG-SGTXT) for a particular G/L of a Document (FB02) ?

Hi,
The standard program RFBIBL00 does FAE(FI) posting in our custom program.
For doing so, we are passing a file with all the revenue G/L account details based on the structure BSEG.
The standard program creates a document for the FI posting.
When we view the document in transaction FB03, posting has been made for all the revenue G/L accounts and
also the corresponding VAT G/L accounts and the exact Tax amount has been determined by the standard program and posting has been made for the same.
But the Text field (BSEG-SGTXT) is empty for the VAT G/L accounts, since those account details has been determined in run-time by the standard program.
NOTE: Text fields have the constant value only for the revenue G/L accounts, since we pass to the file to the standard program only for the revenue G/L accounts.
Our requirement is to add the value in the text field for a particular VAT G/L account.
Kindly suggest few methods to add the constant value in the text field for a particular G/L account of the document through our custom program.
Thanks in Advance.
Yogesh.

Thanks for your quick answer,
I have checked the table BSAS as well, it also has no entries corresponding the above G/Laccount.
I can find the entries in BSEG for that G/L, but since it does not have the G/L account as primary key
my program will take very long processing time as the user will give range of G/L accounts.
When I Check the Report FS10N with the same G/L account, and double click to see the lineitems
it also gives me the message 'no line items found' eventhough it shows some amount in the first screen.
Salman Zahir

Techical field ( and Table ) for Promotion type for a particular Customer

Hi All,
Where can I find the promotion type for a particular Customer?
Thanks,
Sanjeet

Hi Suman,
I think you are talking about Transaction VB33.
Table - KONA (Rebate Agreements)
Field - KNUMA (Agreement (various conditions grouped together))
Structure - RV13A (Input/Output Fields for Price Element Maintenance)
Field - KNUMA_PI (Promotion)
And if you want based on particular customer..
Table - KOTE003 (Customer)
Field - KNUMA (Agreement (various conditions grouped together))
Table - KOTE004 (Customer Hierarchy)
Field - KNUMA (Agreement (various conditions grouped together))
Best Regards,
Sayak

How to maintain the amount field format after GUI_DOWNLOAD

Hi everyone.
I have this problem on my object.
The format of field ERFMG in table AUFM is 3.921,569.
After I SELECT it INTO an internal table it becomes like this 3921.569
I would display this internal table in ALV and its ok. Its format is 3.921,569 The format is also not changed when I download it into an excel file using LIST -> EXPORT -> LOCAL FILE -> SPREADSHEET.
However my program should automatically download to local if the user tick a checkbox in the selection-screen. It will use function module GUI_DOWNLOAD. When this is used, the format of ERFMG changes to 3921.569 again, since it is using my declared internal table.
How will I use GUI_DOWNLOAD without changing the format of amount fields like ERFMG? What are my other options to do this?
The Decimal Notation in my User Profile is already set to 1.234.567,89
Thank you in advance.

Hi Cris,
To get the output in the user format for the decimals, try the following code.
data: wg_dec(7) type p decimals 2.
data: wg_dcp type usr01-dcpfm.
data: wg_dec_str(10) type c.
wg_dec = '111135.67'.
select single dcpfm from usr01
into wg_dcp
where bname = sy-uname.
move wg_dec to wg_dec_str.
if wg_dcp ne 'X'.
replace all occurrences of '.' in wg_dec_str with ',' .
endif .
write:/ wg_dec, wg_dec_str.
I dont feel there is any other option where you can change the decimals format as per the user profile.
While giving the output of decimal values in a list, the system automatically displays it in the profile set by the user.
This code will help you to set the decimal value as '.' or ',' as per the user profile.
Note: It wont add the unit separator for hundreds and thousands. Again you have to do that manually.
Hope this proves of some help to you.
Regards,
Pulkit

How make display only the amount field in table control(infotype 0008)

Dear Freinds,
have to make display only the amount field (Q0008-bet01) on table control in infotype 0008 , could you tell me how to make it display only.
i have tried the below coding it is not working in PBO & PAI of the user exit
ZXPADU01 and ZXPADU02. For the table control is there any othe method??
       loop at screen.
           screen-name = 'WA_P0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
i have tried like this as well
       loop at screen.
           screen-name = 'Q0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
in the both the above methods it is not working. Could any one plese suggest me how to make display only the amount field in infotype 0008.
regards
syamla

Dear Freinds,
have to make display only the amount field (Q0008-bet01) on table control in infotype 0008 , could you tell me how to make it display only.
i have tried the below coding it is not working in PBO & PAI of the user exit
ZXPADU01 and ZXPADU02. For the table control is there any othe method??
       loop at screen.
           screen-name = 'WA_P0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
i have tried like this as well
       loop at screen.
           screen-name = 'Q0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
in the both the above methods it is not working. Could any one plese suggest me how to make display only the amount field in infotype 0008.
regards
syamla

How to club the amount field for the particular customer from file

Similar Messages

Maybe you are looking for