How to collect a tranformation and routines in it in a transport request

how to collect a tranformation and routines in it in a transport request.
also if a tranfer rule and its routines to be collected in a transport request.

goto RSA1-> Transport connections
select object types in the left pane..drop down the transformation type and select the transformation that is to be captured.
move it to the right pane. Right click on the transformation and select 'do not check any below' if you do not wanna transfer the source and the target info providers. Drill down through the transformation and select the routines that needs capturing.
select 'package' and give the appropriate package name and save it. It will ask for the request number and give the requst number.
The objects are collected.
To check go to se01 and check under the requests if the objects are captured.
-Srivatsan.S

Similar Messages

How to find the source and target systems of an imported Transport Request?

Hello,
How to find the source and target systems of an imported Transport Request?
chinna.

Hi Chinna,
In your landscape the TMS must have configured.Let assume that you have four six systems in the land scape.
DEV->DEV1->QUA->PRD and other two systems (TR1 ,TR2)are at different domain amd both are connected to QUA and the requests are forwarded from there.Here normally the flow willl be from DEV to DEV1, then DEV1 to QUA and QUA to PRD.For other two systems (TR1 ,TR2 )the source system will always be QUA.
Regards
Ashok

How do we know the size from the our objects in transport request no?

Dear All,
I have the need to know the size from the objects that we're gonna transport where those objects are attached in transport request no.
Is that the way to know it ?
If yes, could you kindly let me know regarding it ?
Thanks a lot,
Best regards,
Daniel N.

Hi Niel,
If you want size and information of co files and data files, then the manual procedure is like this.
1. Using transaction code AL11 (to see files on server)
2. Goto folder DIR_TRFILES ( or /usr/sap/trans)
3. Double click on that row.
4. Inside that you will find two folders (among other folders)
    cofiles, data
5. Goinside the subfolder you are interested. Eg. cofile
6. Now suppose you request number is ABCK900168
   where ABC will be your system number, then the file name will be
   K900168.ABC
or you can search for K900168
7. The data file will have the name (in data folder)
    R900168
There you can see the size (length column name) of the file.
Hope this helps.
regards,
amit m.

GPP: Item Level Targeting - How are collections evaluated?

We are looking at optimizing a new VDI environment and are overhauling are GPOs which will be applied to those machines. Using a third party product, we're moving some of the user based settings into its management stack.
There are additional debates over whether or not we should create separate OUs for some geographical scenarios so that we can apply two different GPOs with only one setting difference... location. My feeling is that we should use a standard naming
convention on east vs west and use a single GPO with a computer name ILT to apply the east/west setting.
I can't seem to find anything with regards to how ILT collections are evaluated and what impact they may have on the system. Does ILT use WMI to evaluate the name or some other method?
Thanks

Hi,
Regarding the questions about Item-Level Targeting, Martin has already given a great explanation. Besides, for ILT, the following article can also be referred to for more information.
Preference Item-Level Targeting
http://msdn.microsoft.com/en-us/library/cc733022.aspx
>>I recall some issue where you can't use AGPM delegated permissions to manage site based policies?
AGPM is a advanced tool for group policy management and it's part of MDOP. Although it's related to group policy, Microsoft has a dedicated forum for AGPM questions. In order to get better assistance, we can ask for advice regarding AGPM
in that forum.
Microsoft Advanced Group Policy Management
https://social.technet.microsoft.com/Forums/windows/en-US/home?forum=mdopagpm
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

Error in collecting transfer Rules in transport request after system copy

Hello,
Recently we had a system copy from Production to Test system.
We are trying to collect all the transfer rules from production in the transport request with the procedure which is given in the below link.
Re: Q: Transfer Rules after system copy
When we are trying to transport such objects, system first prompt for transportable workbench request, after specifying request once, it prompts for it again and after providing transport request number system results with message u201CSpecify a requestu201D.
Please suggest how to overcome this issue.

thats scary that you are copying your transfer rules from production to test system well if you guy sare doing it good luck..
a part from that make sure your prd is open so it allows items to be able to transport an dthere is a conenction between prd to test for transports to go through
if you have already copied all te data source to TEST, replicate them IN BWQ( your test system) then send over tranfer fules .
hope that helps.

Collecting INFOPACKAGE in Transport request individually

Hi ALL:
While collecting infopackage in Transport request individually(Flow is Infosources> Tools> Object Catalog Entry), it is not prompting to enter the valid transport request number(after entering the valid package name).
Can anyone suggest me how to get the screen that prompts to enter the valid transport request number.
Thanks

Here is the steps to collect objects under transport request:
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
3. then choose your infocube and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request. Repeat the same steps with grouping 'in dataflow before'
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
9. If everything is ok, release your request and ask your basis/security guy to move to QA.
OR
When you will create any object and save it, system will ask you to save under transport request and you can either save it under your transport request or can create new request.
Hope this helps..

Transport request for BW queries and roles.

Hi All,
we need to craete 20 bw queries on 4 multiproviders. We need to save 18 queries as workbooks in one role and the other 2 queries in other role. Both the roles and queries does not exist and will be created in Developement environment.
We just want to know how we can transport them in the quality environment. What is the right method to transport them.
Can we transport all the object queries, workbooks and roles in number of transport requests so that if few queries or workbooks needs any changes then we do not have to transport all objects just the request which includes the changed objects.
Thanks & Kind Regards,
Hardeep

Thanks a lot for all of you for your quick response. But i still have questions.
If we create one transport for roles and one transport for each query then we will be having 21 transport requests. But the transport request on same multiprovider can lock the clacuated key figures and restricted key figures, if they are present in more than one query, it means they will be present in more than one transport requests, so they can be locked and trasport request will be failed.
If i just create one transport request for all the objects roles, quaries & workbooks it will not loack any object, and transport request will not fail. But i have to transport all the objects again if i need to change one of the queries.
Please let me know if there is a method that i can divide my queries as per multiprovider and can create transport requests as per multiprovider so that we can not lock calculated keyfigures and restricted key figures. Is workbooks can be published in the role in the same transport request. If it is and if in more than one transport request we are publishing the different workbooks to the same role, will it lock the role.

ROUTINE objects in transport request..........

Hi ,
I activated some of the update rules.
In transport request I am getting lot of objects in the tree
for Title ROUTINE.
I want to check these routine objects.
when I copies this technical name and try to find out in
metadata repository I dont get anything.
I want to see what these routine objects are and why it is
coming in transport request because Update rules are already
present in the transport request , then why these extra objects?
Thanks,
Jeetu

Hi,
the routines of the update rules can be found in table RSUPDROUT.
These are the routine IDs listed in the transport.
If you go with this ID to the table RSAABAP you will see the exact code of the routine.
I hope this helps!
Best regards,
Paula Csete

How to include .txt (notepad file) into Transport Request?

Hello,
We are configuring the SolMan Service Desk (SPS15) and the IMG says that we need to activate BC sets and we did that.
There is a note 898614 (Service Desk-BC sets) states that for the installation we need to Copy the contents of the file Piecelist_Service_Desk_Initial.txt to the transport
request.
Can anyone help me the procedure how do we go about this activity and if i do this on the Development Client can i move this to the Producation too.
Thanks and Regards,
Rao
Edited by: Rao on Jul 28, 2008 3:56 PM

Hi,
You just need to open the text file and copy the entries into the transport request.
Below is the procedure on how to copy the entries into a transport request.
Goto trx SE10 --> Create a transport request --> Double click on the request --> selcts tab 'objects' and paste the entries there.
Pl reward points if it helps.
Thanks,
Naga

How to track Transport request released

hi Experts,
How to track Transport request released from one development system (D01)to another
development (D02).
is there any way we get know .
Amit

Hi,
       From SE09 & SE10 you track the transport requests, and even you can find the transport request details from the following database tables.
E070                             Change & Transport System: Header of Requests/Tasks
E070A                            Change & Transport System: Attributes of a Request
E070CREATE                       Change & Transport System: Creation Date of Request
E070DEP                          Change & Transport System: Dependencies of Requests
E071                             Change & Transport System: Object Entries of Requests/Tasks
E071C                            Change & Transport System: Client-Specific Lock Flag
E071E                            Lang. Transport: Positive List for Generic Object Selection
E071K                            Change & Transport System: Key Entries of Requests/Tasks
E071KC                           Change & Transport System: Key Entries of Requests/Tasks
E071KF                           Change & Transport System: Nametab Info. on (CHAR)Key Fields
E071KFINI                        Change & Transport System: Nametab Info. on (CHAR)Key Fields
E071K_30                         Change & Transport System: Key Entries of Requests/Tasks
E07T                             Change & Transport System: Short Texts for Requests/Tasks

How can i delete a transport request?

Hello:
I only speak a little english. I wait that you can understand me.
I have a transport request that is released. I make bad this request and i need delete it. But, when i go to se10 and I try to delete I recive this messagge:
Request/task ____ already releaded (not modificable).
How can I delete this request?
Thank you very much.
Report RDDIT076 is internal and should not be executed by customers.
- Reported by Jason ORiordan
Message was edited by: Suhas Saha

Hi,
It is easilly possible to delete the cofile and the datafile of the released transport request but why would you need to do that ?
It is also possible to delete a transport request in the transport tables but it is a very bad idea and could even be seen as a temptative to hide a forbidden action in the system.
It will be seen by a security audit as this would create a hole in the request order numbering.
You would need to use direct database access to delete a released transport request.
As I told you before, I would NOT do it as it is hasardous et may generate security audit problems.
You can also destroy your transport system.
Transport requests are stored in table E070.
We only modify the e070 table after system copy by database refresh to reset the next transport request number. It is done by inserting a line in the table. We never delete inside this table.
Use at your own risk !
Regards,
Raj.

Recently, when I create a new album (untitled), it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?

Recently, when I create a new album (untitled), it immediately fills it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?

When a new album is created it will fill with whatever is in the right hand window, If you're in the Events or Photos mode it will contain all photos in the library. Yes, strange behavior.
OT

How to create an elementary and collective search help in webdynpro

Hi all,
my requirement is i have to create an collective search help. and that should be same as other tcode search help functionality.
and now the ztcode is in r3 system and my webynpro development is going on bw system how to copy that tcode from r3 to bw system. and then for my input field is cost center and for this input field i should create the search help functionalty.kindly help me how to achieve this functionality i am new to this webdynpro so kindly send me the detail steps.
Thanks & Regards,
Naveen

Hi Naveen,
There's no difference to using a collective search help or a regular search help.
in the attribute of the context that you want the search helps to appear for - specify that the input help is of type dictionary search help, then specify that the input help is your collective search help.
Search helps in WDA, if search help is available at dictionary level, no need to create any search help, you get automatically.
If you want to create search help for any input field, another option is using OVS. we have WDR_OVS component for search helps, you need to reuse this component in your custom component, just change some coding according to your requirements you get search help.
Go through these documentation and helps...
http://help.sap.com/saphelp_nw73/helpdata/en/cf/21ee45446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw73/helpdata/en/3d/e53642e2a3ab04e10000000a1550b0/content.htm
OVS search help..
http://wiki.sdn.sap.com/wiki/display/Snippets/OVSSearchHelpinWebDynproAbap
freely programmed inputhelp
http://wiki.sdn.sap.com/wiki/display/WDABAP/Freelyprogrammedinput+help
http://wiki.sdn.sap.com/wiki/display/WDABAP/UsingSearchhelpattachmentsforWebDynproABAP
Thanks,
Kris.

How to collect data and store data through printer port usind Dev'6i

Hi,
When we make a phone call through a PABX machine, the PABX machine print the call's detail if it is connect to printer. Let us assume, the PABX machine is connected via the printer cable with a PC at it's printer port. Now, the data sending by the PABX machine is reaching to PC's printer port, I would like to collect those data and store in a file(of any format) using Developer 6i. Is that possible? If yes, then how? Do I need to use any ActiveX control? Or is there any other way?
Please Help me out. Thanks in advance.
Bivash

Dear Friends
I also need a solution to this problem. But it may require sequance / format of information being sent by weigh bridge to the COM port. Normally the W/b company has their own format of information. We might have to change the COMP port speed also .e.g 9600 BPS, 2400 BPS etc.
Rajan

How to collect and transport a hierrachy linked to an object ?

Hi guru,
I am working in BI 7.0 and linked a Hierarchy to oan object.
When I transported the object to production, the hierarchy is missing in production.
How to collect and transport this hierachy ?
In case of a user-defined hierarchy, is it possible to transport it or have I to re-create in prod ?
Thanks for your support

hi ,
Yes we can create hierarchy in production .
But if you have some kind of infrastructure build for data laod , that needs to be separately migrated.
The Info-object with the Hierarchy check in maintaineance window of info-object should be migrated to production in order to naually maintain the hierarchy in Production
Thanks
Mukesh

How to collect a tranformation and routines in it in a transport request

Similar Messages

Maybe you are looking for