HOW TO COLOUR SOME COLUMNS GLOBALLY

hi gurus
I HAVE 4 CHARACHTERISTICS AND 20KEY FIGURES. I WANT WHEN WE EXECUTE THIS SOME COLUMNS COMES IN DIFFERENT COLOURS, IS IT POSSIBLE TO COLOUR SOME CHARACTERISTICS OR KEY FIGURES GLOBALLY
THANKS
ABHAY

Hi
If you want to color some columns based on some condition like keyfigure A > 10 B < 10 you can create exceptions.
1) Open Query in Query Designer
2) Click on Icon Exceptions -
> exceptions window will appear -
>right click on exception and select New Exception and click on Edit
3) Change Exception window will appear -
> Click on New and select the alert level ( good , bad , critical etc) good green color, bad red color...----> select operator ( < > = ) -
>enter value 10 or 20 .
4) In the definition tab of the exception window you can select the key figure which needs to be colored.
5) Save the Query and Execute
Thanks

Similar Messages

How to create some columns dynamically in the report designer depending upon the input selection

Post Author: ekta
CA Forum: Crystal Reports
how to create some columns dynamically in the report designer depending upon the input selection
how export this dynamic report in (pdf , xls,doc and rtf format)
report format is as below:
Element Codes
1
16
14
11
19
10
2
3
Employee nos.
Employee Name
Normal
RDO
WC
Breveavement
LWOP
Sick
Carers leave
AL
O/T 1.5
O/T 2.0
Total Hours
000004
PHAN , Hanh Huynh
68.40
7.60
76.00
000010
I , Jungue
68.40
7.60
2.00
5.00
76.00
000022
GARFINKEL , Hersch
66.30
7.60
2.10
76.00
In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
Can anybody help me how do I design such report....
Thanks

Hi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu

How to hide some columns in FBCJ tcode

hi experts,
is it possible to hide some columns in FBCJ for some particular user ids.
i want to display only these following columns for some particular user ids. I tried configuration button exists on right corner of table above scroll bar by changing administrator settings.
But it is reflecting for all user ids.
I want to reflect changes for some particular user ids.
1. business trnsaction
2. amount
3.Document status
4. g/l account
4. Receipt Recipient
6. text
7. vendor
8. Reference
9. company code
10. cost center
11. profit center
12. additional text1
13. additional text 2.
I came to know by using screen variants we can achieve this.
But i dont know how to proceed.
Kindly provide steps to make changes.
thanks & regards,
Hari priya

Hi,
Check out this link.Probably this would be useful.
http://www.madeitsimple.com/technology/sap-abap-transaction-variants/
Thanks
Papiya

How to hide some column filter operators in Interactive Report

Hi,
I have an APEX 4.2 application what includes Interactive Report page.
Is there possibilty to hide or disable some filter operators in column filter?
But I don't want to disable all filter functionality for end users.
For example how to hide/disable operator "matches regular expression".
Some filter operators are too complicated for end users.
I have searhced but not found solution.
regards,
Erkki

erkkik wrote:
I have an APEX 4.2 application what includes Interactive Report page.
Is there possibilty to hide or disable some filter operators in column filter?
But I don't want to disable all filter functionality for end users.
For example how to hide/disable operator "matches regular expression".
Some filter operators are too complicated for end users.
I wouldn't really recommend this. Users will quickly recognise what works for them and avoid options that they do not currently understand. However, over time—through training or advice from more experienced users—they may come to understand and use all of the available features. Blocking access (especially in a non-standard way) to options that users may eventually need is likely to result in unnecessary development work now and at some (possibly inconvenient) time in the future.
That said, this really isn't difficult to implement using CSS. Use your browser web inspector to identify which filter types are to be blocked, using the value attribute of the filter Operator select list in the generated IR HTML. For example, in APEX 5.0 a filter operator select list looks like:
<select id="R70597672218719366505_STRING_OPT" class="a-IRR-operator" data-column-type="STRING" title="Operator" name="p_ignore_10" size="1">
<option value="=">=</option>
<option value="!=">!=</option>
<option value="is null">is null</option>
<option value="is not null">is not null</option>
<option value="like">like</option>
<option value="not like">not like</option>
<option value="in">in</option>
<option value="not in">not in</option>
<option value="contains">contains</option>
<option value="does not contain">does not contain</option>
<option value="regexp_like">matches regular expression</option>
</select>
The "matches regular expression" option has the value regexp_like, so the required CSS rule using the IR operator select list class and an attribute selector on the option value is:
.a-IRR-operator option[value="regexp_like"] {
display: none;
Additional selectors for other filter types can be added to this rule as required, for example:
.a-IRR-operator option[value="regexp_like"],
.a-IRR-operator option[value="is not null"] {
display: none;
to eliminate the "is not null" filter.
To implement this for all IRs in your application, create a custom CSS style sheet containing the rule, upload it to your workspace, and reference it in all of the page templates used for IR pages.
This is not a 100% foolproof solution. CSS is not an appropriate way to implement security restrictions. A web-savvy user could use their web inspector to disable the CSS rule and access the blocked filter(s). However there is little risk here as (1) it appears that your users will lack the required expertise; and (2) doing so will only allow them to further filter data they already have access to.

How to Update some column values in some rows in an advanced table

Hi Gurus,
Can any body help on this issue.
I am having a results table which is showing all the queried parties data queried in a seeded page in OCO module.
Lets assume the table contains 10 rows with the below columns
Party Name, Registry ID, Address Country, Match Percentage, Certification Level, Certification Reason, Internal Indicator, Status .
Certification Level, Certification Reason and Internal Indicator are the dropdowns.
The user want to update some of these fields values for some rows randomly.
After doing this if he click on Save button, Only thosed changed rows need to get update using a Custom Procedure.
But here all the rows irrespective of the change getting updated.
So how to capture the modified rows.
Appreciate any inputs..
Thanks
Palepu
Edited by: Palepu on 9 Aug, 2012 4:25 PM

Not sure if you got the answer. You need to capture the row which got changed using the below and get the column value using the getAttribute method. This works for single selection row, if it is multi selection then you will have to loop through all selected rows and find the VO attribute value.
String rowReference = pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
Row currentRow = am.findRowByRef(rowReference);
String param1= (String)currentRow.getAttribute("VOAttribute");
Let me know if there are any issues.
Thanks
Shree

How to colour a column

Hi guys,
I hope that you are doing great these days.
How can I colour the data in a column in Interactive Report.?
How can I colour the header of a column in Interactive Report.?
-- I do not mean doing it with Highlight in Action menu
Best Wishes,
Fateh

Why have you marked that response as correct when
<li>it only addresses half of your question?
<li>it creates another problem you need to solve?
In APEX the presentational aspects of an application are normally controlled using a combination of (X)HTML and CSS via themes and templates. You need to have an understanding of these technologies to make best use of APEX.
Interactive reports are somewhat different as they do not have a developer-customizable template, but we can still use CSS to style them by working out what selectors to use. A web inspector like that found in Safari, or the Firefox+Firebug combo) is usually used for this.
There are 3 ways to include CSS in web pages. In this case the easiest is using an internal style sheet. Add a <tt><style></tt> element containing the required CSS rules to the HTML Header property in the APEX Page Attributes:
<style type="text/css">
Column header
.apexir_WORKSHEET_DATA th[id="COLUMN_NAME"],
.apexir_WORKSHEET_DATA th[id="COLUMN_NAME"] div {
background: #900 !important;
color: #fff !important;
Column cells
.apexir_WORKSHEET_DATA td[headers="COLUMN_NAME"] {
background: #c00 !important;
color: #fff !important;
</style>Replace <tt>COLUMN_NAME</tt> with the name of your report column.
Note that for any questions relating to styling and the visual appearance of an app you really need to reproduce the problem on apex.oracle.com, or at least provide the following information:
- APEX version
- DB version and edition
- Web server architecture (EPG, OHS or APEX listener)
- Browser(s)/version(s) used
- Theme
- Templates
- Region type(s)
as both the problem and solution can be dependent on these factors.

How to disable some "columns to display"?

Hello!
I have one management pack (it's monitor some our network devices), which was written by contractors for our company. This mp have many unnecessary columns in it's view. I deleted some of these <ColumnInfo>
from mp (.xml file). Then I import mp but these columns
have not disappeared.
Can anybody help me? What should I do to remove these columns?
P.S. I know that I can disable them with "Personalize view", but I want to do it
centralized (all of the console users must see these changes).

Hi,
Since the MP was written by contractors, it is better to contact them edit the column.
Meanwhile, after importing the management pack, please re-create monitor for
a test.
Niki Han
TechNet Community Support

How to remove some columns from an existing table?

Let's say my table's structure is as follows:
Table name: EMPLOYEE
Columns: Name, Birthdate, Gender, Salary, Hometown, Language and so on.
There are data in the table. Now I want to remove columns Hometown and Language, and I don't care the data loss. Also, there is no constraint.
What's the sql command to do this? Thanks!

I think you need to be a bit more specific than stating that something is not correct.
It is perfectly correct and proper to drop a column from a table even when there is data. The problem comes when you need to drop a column and the window you have to perform the expensive operation of actually reclaiming the disk space is insufficient. If that is the case (and there is no indication from the original poster that is the case, but it's certainly conceivable), it may make sense to mark the column as unused, which is a quick update to the data dictionary and then drop the unused columns at a later date when you have a larger window. This is incredibly useful in a handful of larger systems, but not particularly necessary in most systems most of the time. It wouldn't make sense to mark a column unused and then immediately drop the column.
If you are going to go the SET UNUSED route, your syntax is incorrect. Once you mark the column unused, you can't drop the column by name any longer (since you can add a column with the unused column's old name, it's also potentially rather dangerous). You have to use the DROP UNUSED COLUMNS clause
SQL> desc x;
Name                                      Null?    Type
COL1                                      NOT NULL NUMBER
COL2                                               NUMBER
SQL> alter table x set unused column col2;
Table altered.
SQL> alter table x drop column col2;
alter table x drop column col2
ERROR at line 1:
ORA-00904: "COL2": invalid identifier
SQL> alter table x drop unused columns;
Table altered.Justin

Disable some columns in table control?

Hi
How to disable some columns in table control.
For Ex: Table contains 8 columns.
In first row i want to disable first 4 columns.
in second row i want to disable last 4 columns.
In third row i want to disable first 2 and last 2 columns. How can we achieve this?
Cheers,
Venkys.

HI
Create three attribute in the node which is bound to the table as data source.
say pro1, pro2, and pro3 of type wdy_boolean.
now bind the enabled property of first four column editors to pro1, last 4 to pro2, and pro3 to first 2 and last 2.
then go to the eventhandler of the dropdown 's on select event and write the code to update the values of these attribute
according to the selected value.
here is the sample code.
DATA lo_nd TYPE REF TO if_wd_context_node.
    DATA lo_el TYPE REF TO if_wd_context_element.
        DATA lv_VAL LIKE ls_dealer1-name.
    lo_nd = wd_context->get_child_node( name = 'DEALER1').
lo_el = lo_nd->get_element( ).
    lo_el->get_attribute(
      EXPORTING
        name = `NAME`
      IMPORTING
        value = lv_VAL ).
     DATA PR1 TYPE WDY_BOOLEAN.
     DATA PR2 TYPE WDY_BOOLEAN.
     DATA PR3 TYPE WDY_BOOLEAN.
PR1 = ABAP_TRUE.
PR2 = ABAP_TRUE.
PR3 = ABAP_TRUE.
IF LV_VAL EQ 'A'.
PR1 = ABAP_FALSE.
PR2 = ABAP_TRUE.
PR3 = ABAP_TRUE.
   ELSEIF LV_VAL EQ 'B'.
PR1 = ABAP_TRUE.
PR2 = ABAP_FALSE.
PR3 = ABAP_TRUE.
ELSEIF LV_VAL EQ 'C'.
PR1 = ABAP_TRUE.
PR2 = ABAP_TRUE.
PR3 = ABAP_FALSE.
ENDIF.
   LO_EL->SET_ATTRIBUTE(
   NAME = 'PRO1'
   VALUE = PR1
   LO_EL->SET_ATTRIBUTE(
   NAME = 'PRO2'
   VALUE = PR2
   LO_EL->SET_ATTRIBUTE(
   NAME = 'PRO3'
   VALUE = PR3
thanks
sarbjeet singh

How could I display some columns in a JTable?

Help, please:
I got a Table data(using AbstractedTableModel), and I can display all rows and columns. How can I just display several columns and all rows? Should I delete some columns from table and fireChanges or what? but I need these columns later. Make sense? any ideas?
Thanks for any helps.
Royan

this worked for me,
import java.util.*;
import java.io.*;
import java.net.URL;
import java.sql.*;
import javax.swing.table.*;
import javax.swing.*;
public class HideTableColumns
      public HideTableColumns()
      private void initialize()
      DefaultTableModel m = new DefaultTableModel();
      try {
         java.util.Vector data = new java.util.Vector();
         java.util.Vector headers = new java.util.Vector();
         String s = "";
         headers.addElement( "OrderID" );
         headers.addElement( "CustomerID" );
         java.util.Vector datum = null;
         datum = new java.util.Vector();
         s = "OrderID";
         datum.addElement( s );
         s = "CustomerID";
         datum.addElement( s );
         data.addElement( datum );
         m.setDataVector( data, headers );
         for( int r = 0; r < m.getRowCount(); r++ )
            for( int c = 0; c < m.getColumnCount(); c++ )
            s = ( m.getValueAt( r, c ) ).toString();
            System.out.println( s );
      } catch( Exception e ) {
         System.out.println(e.getMessage());
         e.printStackTrace();
      JFrame f = new JFrame();
      JPanel p = (JPanel) f.getContentPane();
      JTable tb = new JTable( m );
      TableColumn col = tb.getColumnModel().getColumn(1);
      col.setPreferredWidth(0);
      col.setMinWidth(0);
      col.setMaxWidth(0);
      p.add( tb );
      f.pack();
      f.show();
      public static void main( String[] args )
      HideTableColumns d1 = new HideTableColumns();
      d1.initialize();
}

Change the colour of some column headers

Hello All,
I have a table with a few columns. I want to colour some of the column headers. I want to do this as these columns represent a KEY.
Regards,
Aayush

Hi Aayush,
As such there doesn't exist any way to colour only some column <b>headers</b>. The two existing options are :
1) Show the data of some columns in a different colour. For this use text views (default one) as the column elements, and select one among the few built-in colours for the property 'semanticColor' of the text view.
2) Attach a small image to the primary column's header, using the 'imageSource' property of the table header.
Hope this helps,
Best Regards,
Nibu.

How to disable sorting for some columns in a ALV GRID?

Hi i have requirement where I have to disable sorting for some columns in a ALV GRID. i am using REUSE_ALV_GRID_DISPLAY function module.
Can anybody help me. how to acieve this? Any code snippets will really be appreciated.

Hi,
I have tried this but not completely successful. I think this can be done using the OOPS method.
DATA: it_event_exit TYPE slis_t_event_exit.
DATA: w_exit TYPE slis_event_exit.
w_exit-ucomm = '&ODN'.
w_exit-before = 'X'.
CLEAR w_exit-after.
APPEND w_exit TO it_event_exit.
w_exit-ucomm = '&OUP'.
w_exit-before = 'X'.
CLEAR w_exit-after.
APPEND w_exit TO it_event_exit.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program          = w_repid
      i_callback_top_of_page      = 'ALV_TOP_OF_PAGE'
      i_callback_html_top_of_page = 'ALV_HTML_TOP_OF_PAGE'
      i_callback_user_command     = 'USER_COMMAND' <- User command form
      is_layout                   = wm_layout
      it_fieldcat                 = wt_fieldcat
      it_events                   = i_events
      it_event_exit               = it_event_exit    <- Need to fill
      it_sort                     = wt_sort
      i_default                   = 'X'
Now you can capture this events in the user command
FORM user_command USING r_ucomm LIKE sy-ucomm
                         rs_selfield TYPE slis_selfield.
IF r_ucomm = '&OUP' and rs_selfield-SEL_TAB_FIELD = 'Your field name'.
ENDIF.
ENDFORM.                    "user_command
In this form you will get the function code in 'r_ucomm' and the field selected for sorting in 'rs_selfield-SEL_TAB_FIELD'. But reseting 'r_ucomm' will not work.
May be somebody else can give some help on this.
But this will work if you follow the oop method.
Please see this document for more info.
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/an easy reference for alv grid control.pdf
Thanks
Vinod

How create report with data from table and some columns results function ?

Hi,
How can i create on apex report region with some columns (of the report) as returned from a table and the other columns as results of plsql functions ?
for example , I want to create a report like that:
device last_date error_msg stop/start
kodak1 06/04/08 null >>
kodak2 08/03/08 good msg --^--
kodak3 08/04/08 err msg >>
3 rows returned
where the 3 first columns are data returned from the table and the forth column is the result of plsql function (returned for example false) and on that i want to display a button of start ( >> in this example ) or stop ( --^-- in this example)

Thomas,
There is no problem here -- this is fully suported scenario.
1. Bind Table dataSource to Customers node.
2. Bind individual cell editors to any attribute of customer or any nested node like Address, say create column with InputField as editor, then for "value" property select Customer.Address.Street.
Your nested nodes (like Address) must be non-singleton, set singleton=false on context designer tab.
Valery Silaev
EPAM Systems
http://www.NetWeaverTeam.com

Trying to use 2 different Dimension tables and make a hierarchy on some columns which are split into these dimensions .. how do I do that

Trying to use 2 different Dimension tables and make a hierarchy on some columns which are split into these dimensions .. how do I do that

If you need to make a hierarchy in an Attribute view you need to have all relevant fields/columns in the same Dimension table..

How can I make a global change so all controls and indicators labels on the front panel change to another colour?

How can I make a global change so all controls and indicators labels on the front panel change to another colour?
I need to change the front panel so that it can be used in a dark environment.

Hi
The only way I see, is to use the "Controls[]" property and iterate through all of them. But don't forget about nested elements (i.e. clusters, tab-controls, ...).
Thomas
Using LV8.0
Don't be afraid to rate a good answer...

HOW TO COLOUR SOME COLUMNS GLOBALLY

Similar Messages

Maybe you are looking for