How to combine 2 diff transactions into 1 transaction

Hi All,
I want to combine 2 diff transactions into single transaction so taht i can run these 2 at a time as a single transaction. Currently we have 2 diff transactions which we need to run one after anether. So we want to combine these 2 transactions as a single transaction. Is it possible, how we can do that. thanks in advance.
Thanks,
Vishal

U can create a ABAP which calls the transaction one after another...and assign the new ABAP a transaction
code using SE93.
Basically the abap would like below.
Report Ztrans.
start-of-selection.
call transaction ZT01.
call transactin ZT02.
Regards
Anurag
Message was edited by: Anurag Bankley

Similar Messages

How to combine mutiple tracks into one album in itunes 12

How to combine mutiple tracks into one album in itunes 12

Make sure they all have the same Album Artist and Album Name.

HT4059 I'm trying to organize my PDFs in iBooks on my ipad2 and I can't figure out how to combine multiple PDFs into one. Any thoughts?

I'm trying to organize my PDFs in iBooks on my ipad2 and can't figure out how to combine multiple PDFs into one. Any thoughts?

I'm trying to organize my PDFs in iBooks on my ipad2 and can't figure out how to combine multiple PDFs into one. Any thoughts?

How to combine several measures into 1 pie chart

Hello everyone,
I have a requirement to create a design studio application with a pie chart to show several measures.
It means that I have several different measures and I want to let each piece of the pie chart present 1 measure.
For example, I need to combine measure1 ,measure2, measure3(which correspond KeyFigures in Bex query) into 1 pie chart and there should have 3 pieces.I tried change swap axis option and put all measures into row, not works.
I am very appreciate if anyone could help. Thanks a lot.

Hi !
There is a tricky way to do that.
Read the following document How to combine several measures into 1 Pie chart
hope it helps,
Roman

How to combine many rows into one row

Hi all,
I have a question regarding to how to combine many rows into one row?
My result set is like that:
ITEM_NO NAME1
11 abc
11 cde
11 fg
Want to combine them into
ITEM_NO NAME1
11 abc;cde;fg
would anybody can tell me how to do that? Thanks
Ray

You can check this --
satyaki>
satyaki>
satyaki>create table t
2 as
3      select 11 ITEM_NO, 'abc' NAME1 from dual
4      union all
5      select 11 ITEM_NO, 'cde' NAME1 from dual
6      union all
7      select 11 ITEM_NO, 'fg' NAME1 from dual;
Table created.
satyaki>
satyaki>
satyaki>
satyaki>set lin 10
satyaki>
satyaki>desc t;
Name              Null?    Type
ITEM_NO                    NUMBER
NAME1                      VARCHAR2(3)
satyaki>
satyaki>
satyaki>set lin 1000
satyaki>
satyaki>
satyaki>
satyaki>SELECT ITEM_NO,
2         LTRIM(MAX(SYS_CONNECT_BY_PATH(NAME1,';'))
3         KEEP (DENSE_RANK LAST ORDER BY curr),';') AS NAME1_DET
4 FROM   (SELECT ITEM_NO,
5                 NAME1,
6                 ROW_NUMBER() OVER (PARTITION BY ITEM_NO ORDER BY NAME1) AS curr,
7                 ROW_NUMBER() OVER (PARTITION BY ITEM_NO ORDER BY NAME1) -1 AS prev
8          FROM   t)
9 GROUP BY ITEM_NO
10 CONNECT BY prev = PRIOR curr AND ITEM_NO = PRIOR ITEM_NO
11 START WITH curr = 1;
   ITEM_NO NAME1_DET
        11 abc;cde;fgRegards.
Satyaki De.

How to combine many rows into 1 rows in 1 column?

Hi all,
I have a question regarding to how to combine many rows into one row?
My result set is like that:
ITEM_NO NAME1
11 abc
11 cde
11 fg
Want to combine them into
ITEM_NO NAME1
11 abc;cde;fg
would anybody can tell me how to do that? Thanks
Ray

Hi,
select * from x2;
INO NAME
13 PQR
11 ABC
11 DEF
12 JKL
12 MNO
11 GHI
select p.ino as ITEMNO,
substr(max(substr(sys_connect_by_path (p.name,';'),2)),1,60) as ITEMNAME
from (select ino,name,
row_number()over (partition by ino order by ino, name) rn
from x2) p
start with p.rn = 1
connect by p.rn = prior p.rn + 1
and prior p.ino = p.ino
group by ino;
OP
ITEMNO ITEMNAME
11 ABC;DEF;GHI
12 JKL;MNO
13 PQR cheers
Nirmal

How to write plan data into Transactional Cube from Visual Composer ?

Dear experts,
Visual Composer is very powerfull to build a 'nice-looking' web-report (I think is much better than Web Application Designer in term of freely position the chart/graph/table/selection parameter in anywhere we like. We can't have this flexibility in WAD) plus it also has strong integration to R/3 for posting the transactions via RFC-Enabled Function Module (such as changing customer credit limit, approve PO, approve Sales Order, etc), so that the R/3 user won't even have to know the TrxCode.
In addition to this, I just wondering if VC also capable to write plan data into transactional cube via Write-Enable Query. We can simply insert a BW Query into VC as planning layout (set the edit-mode to "editable") plus having some Wizards to make it more user-friendly and self-explanatory for the users.
But I am not sure how to save the changes back to transactional cube from VC.
Could anyone please kindly advise how to achieve this.
"Seeing is believing" is always my learning method, so I would appreciate some "actioanable" explanation or hints.
Many thanks,
Sen

Hi Sen,
As far as I know, it's not possible to write data into transactional cubes directly from a table in Visual Composer through standar method, but it's possible to integrate a WAD with your input ready query into a URL element in VC (You can fill entry variables in VC and call WAD dinamically), so it's possible to create a planning application in VC calling dinamically WAD's.
Another way to interact through VC is creating button objects that calls planning sequences (with BAPI calling RSPLS_PLSEQ_EXECUTE). Also can fill variables in VC and pass them to sequence.
Regards,
Enrique

How to uplaod the data into transaction IA01

Hi All,
I have tried to upload the data into transaction IA01 using direct input object 0470.
But one structure for Service Package Overview tab is missing.Can anyone suggest on how we proceed about it,like is there any BAPI to upload the data.Because there are almost 150 fields that need to be uploaded into the transaction which has different tabs in it so it would be very difficult to handle with BDC's.
Thanks and Regards,
Shilpa

Hi All,
I have tried to upload the data into transaction IA01 using direct input object 0470.
But one structure for Service Package Overview tab is missing.Can anyone suggest on how we proceed about it,like is there any BAPI to upload the data.Because there are almost 150 fields that need to be uploaded into the transaction which has different tabs in it so it would be very difficult to handle with BDC's.
Thanks and Regards,
Shilpa

How to combine several files into one?

How to combine several pdf files into one?

Combine Files is a feature of Acrobat Pro. Because Reader Touch does not support the feature (yet), this is not the right forum for the question.
Here's the Acrobat forum for Creating, Editing & Exporting PDFs.
http://forums.adobe.com/community/acrobat/creating__editing_%26_exporting_pdfs
You can ask questions and get help from Acrobat experts there. Good luck!

How to combine .wmv files into one file???

Hello Apple World,
Can someone tell me a software that will allow me to combine ".wmv" files into one? I have several files that I need to combine then add music to. VERY simple with several software packages frow Windows pc's, but I'm struggling with this since getting my first mac! PLEASE help.

Hi:
How can I edit MPEG or convert DVD or MPEG to DV
http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
Matti says it better than any of us:
how/where you can join clips with Streamclip
Also MPEG Streamclip guide explains it.
MPEG Streamclip can join similar MPEG files: The joined files must have the same PIDs, the same start codes, and the same audio/video properties (that is, they must come from the same source or channel).
Using "Convert to MPEG" before joining the files can be helpful, because it changes PIDs and start codes to a default value. The preferred method to join streams is to Copy one stream in MPEG Streamclip, open another stream and Paste it there. This method checks that the joined streams indeed are compatible. Another method is to put the MPEGs in the same folder, and rename them so that they sort as desired in list view. Then select them via MPEG Streamclip's "File/Open Files..." dialog box (Shift- or Command-click to select multiple MPEGs). Then choose "Edit/Fix Timecode Breaks". After this MPEG Streamclip should report the combined length of all MPEGs (check the Log Window if you want to know whether any timecode breaks were found). Then choose "File/Convert to MPEG... or /Save As..." to save them in a single file. If the video transition between two files looks bad, you can use the Cut command to improve it. You can join very different and incompatible MPEGs with this latter method so the end result is not guaranteed to work.
MPEG Streamclip can also edit MPEG files. Just set In/Out points (with I/O keys), Cut unwanted material off and choose "File/Convert to MPEG...". You can also Cut/Copy selections to other parts of the same stream or open another compatible stream and Paste it there. Shift-dragging the playhead can also be used to define a selection. Option + arrow keys jump to the beginning/end or In/Out points. You can use the Trim-command to more closely see a part of the video before cutting, then choose Revert Trimming to see all material. JKL-keys can be used to enable fast forward or reverse playing. The scroll wheel works also; with the Option key it scrolls 1 second per click. See the manual for more details on how to jump in single frame, GOP, 1 second, 10 second or 1 minute chunks when searching a specific spot in the video.
Editing and trimming can be accurate only if In and Out are both on keyframes because MPEG Streamclip edits to the GOP, not to the frame. For DVD and (XS)VCD the maximum GOP size is PAL 15 and NTSC 18 frames, so the editing accuracy can be up to about 0.6 seconds. You can advance to the previous or next keyframe (i.e. I-frame, the beginning of each GOP or Group Of Pictures) with the Up/Down arrow keys -- you can also use the Edit/Go to Keyframe command to see where the In and Out points really are when editing (the In point is included in the selection, the Out point is not included). Shift + Up/Down arrow keys allow fine-tuning the selection to the GOP.
Sue

Sapscript: How to combine two elements into a block when display ?

/E ITEM_CONDITIONS
/:   PROTECT
ZC &KOMVD-VTEXT&,,&KOMVD-KWERT&
/:   ENDPROTECT
/E TOTAL_AMOUNT_ITEMS
/:   PROTECT
ZC &KOMK-SUPOS&
/:   ENDPROTECT
Hi, all. May i know how to combine the two elements into a same block when displaying?
That's mean this two element content will not be split into two part between two pages when there is insufficient space in the front page.
Thanks.
Edited by: Jiansi Lim on Oct 8, 2008 12:24 AM

You can evoke the PROTECT..ENDPROTECT in the print program before the call of the text elements.
      CALL FUNCTION 'CONTROL_FORM'
        EXPORTING
          command = 'PROTECT'.
      CALL FUNCTION 'CONTROL_FORM'
        EXPORTING
          command = 'ENDPROTECT'.

How to combine video clips into one video clip using FCPX

I typed this into the search engine but could not come up with anything. How do you combine Video clips into one Video clip using FCPX? Thanks in advance.
Gar

The simple answer is to put the clips together in a project in the desired order and export (oops, the new word is share [YUK!]) a master file.
But maybe you should say a little more about the clips to determine whether the answer I've given is relevant to yor situation.

How to combine multiple webservices into one WSDL file

Gurus,
I have 4 four webservices(ws1,ws2,ws3 & ws4) defined in XI. Normally in XI when we define webservice ,WSDL file will be generated for each interface. Now I have 4 related interfaces, so 4 WSDL files will generated. Suppose if I have 100 webservices then 100 WSDL files need to be generated & need to send to other party to consume our services, which is very tedious task & to track also. So is it possible to combine related webservices into one WSDL file? Your inputs will be highly appreciated.
Regards,
Santhosh

Hi,
Instead of trying to combine the interfaces, you can try to define your interface mapping with 4 sender interfaces with in one interface mapping . I think this may give you the result you are expecting.
If you want entire content to be in one interface , then, define single interface which can accomadate, all message ocntent of all 4 interfaces.Means your sender message to contain the 4 datatypes internally.
Regards,
Reyaz

How to combine pdf pages into a single pdf document

I´ve done this before but I forgot. Can anyone help me?

Hi profesora.2014.2015,
Adobe Reader is a free trusted standard for reliably viewing, printing, and annotating PDF documents. It’s the only PDF file viewer that can open and interact with all types of PDF content, including forms and multimedia.
In order to combine PDF pages into a single PDF file, you need to either use Adobe Acrobat (Merging and combining PDF files | Acrobat XI - Adobe India) or Adobe PDF pack (Reliably Create PDFs, Convert PDFs, & Merge PDFs Online | Adobe PDF Pack).

How to combine movie clips into one?

In one Aperture project I have 5 short (under 1 min) movie clips that I would like to combine into one "movie", and would like to know the quickest and easiest way to do this. I am not interested in any editing other than combining the clips into one. Thanks!

In Aperture the only way to combine movie clips is to create a basic slideshow, but you will get better results (stabilization, effects, etc) in iMovie or Quicktime 7, if you have it.
In Aperture:
Create a slideshow with the "Classic" theme: Select the two video clips in the Browser and use: File >New > Slideshow
Set the Default Slideshow settings (Transitions, Text, background) as you like them.
Arrange the clips in the Time Line in the order as you want them.
Press the "Export" button in the upper right corner to export a new video. Reimport it to Aperture.
Regards
Léonie

How to Combine multiple files into the one file?

Hi all,
How do I combine multiple canon hf10 avchd files into the one file with a new extension. No need to be compressed.
Afterwards, I also want to split this combined file to original files.
Need Help!

Yes, angelanna. You can merge or split your video file via FCP sequence.
ahaah, maybe I think angelanna would like to get the resulting file with MTS format because he mentioned “No need to be compressed”. Are you asking for this, angelanna?
If so, a simple MTS files managing and editing tool is needed. Maybe you can have a try the Mac version of Aunsoft Final Mate for managing HD camcorder footages. I just downloaded its free trial version and it offers a simple way of garping footages directly from camcorder. And also it provides a attractive feature to join flawlessly and split accurately native MTS files for video file output with original MTS format.
Maybe this is the tool cwhich an help you out, angelanna.
Enjoy your video.

How to combine 2 diff transactions into 1 transaction

Similar Messages

Maybe you are looking for