How to combine (720p 60fps) with (1080p 30fps)
hi all
I have adobe premiere pro CS5 and a gopro hero HD2
So my question is : How can i edit one single movie coming from footages shot with different qualities, like 1080 at 30 fps and 720 at 60 fps ?, what kind of sequence should i open at first on the software?
The thing is: I can do it, there is no problem in that but as I want the best quality I want to know exactly what to do. Like if I open a sequence of 720p and 30 fps and then import footages at 720p and 60fps is it gonna turn it into 30 fps?
Other question: If my footage is a 720p, what is gonna happen when I export it at 1080? I'm gonna loose some quality right??
thanks
Other question: If my footage is a 720p, what is gonna happen when I export it at 1080? I'm gonna loose some quality right??
Some is an understatement. Better downscale 1080 to 720. Always much better than upscaling. As to the framerate, with some 30P and some 60P, you will be better off with 30P altogether.
Similar Messages
-
How to combine a bar with a line in a chart
Post Author: rbcdexia
CA Forum: Charts and Graphs
We want to combine data in bars and with a line showing in one chart.
Is that possible? How do you configure your chart?
The line and the bars are based on the values from different fields in the same table.Post Author: pareshb
CA Forum: Charts and Graphs
We are using Crystal Reports for Visual Studio 2005. Can you please let me know how to combine a bar with a line chart.
Thanks in advance.Paresh -
How to import 720p 60fps .mov files in premiere pro cs 5.5
hello,
i have recorded a movie with my action cam, i recorded at 720p 60fps and the movie is about 24 min and 1,82GB. I'm trying to import these files, but i get this error message "The importer reported a generic error."
Now i cannot import these movies. Does anyone have a solution for my problem? Or do I need to convert my files to another format (i don't hope so, it's 10 mb/s... i don't like to wait)
also i tried it with a movie that is 1080p 30fps, also a .mov file and from the same camera. This reports the same error message, so that isn't working either.
i hope somebody has a solution for my problem!
on forehand, thanks!
PS. sorry for my bad english :lGo to Edit>Preferences>Media...and set the Indeterminate Media Timebase to the proper frame rate for the media, then Import the files as an Image Sequence.
-
How to combine looping column with calculated column
Dear Gurus,
I have a report that contains number of sale items in each plant. And plant (0PLANT) is a master data. I have to calculate Accumulate Total as below:
Plant
Date Mall 6 Pinklao Siam Mini L/P Total Acc. Total
1 135,260 186,170 103,833 145,636 570,899 570,899
2 32,043 22,772 29,587 19,098 103,500 674,399
3 49,477 48,919 20,206 23,587 142,189 816,588
4 33,937 32,399 30,520 30,710 127,566 944,154
In the column section, I have put the Quantity under Key Figure Structure and put Plant upper the it, so I get the result as below
Plant
Date Mall 6 Pinklao Siam Mini L/P Total
1 135,260 186,170 103,833 145,636 570,899
2 32,043 22,772 29,587 19,098 103,500
3 49,477 48,919 20,206 23,587 142,189
4 33,937 32,399 30,520 30,710 127,566
I have no idea how can I put the Acc. Total to the report. Please suggest me for this issue. I'm so new for BW.
Thanks in advance
Edited by: Sukanya Nawnaung on Apr 24, 2008 6:04 AMNot knowing your tables I do not know the answer as it is not obvious from your scripts what the join between the two data sets would be??
If you can tell me that then you can easily combine the two with an in-line view or using the new WITH... syntax.
Otherwise, I see that the only difference between the two joins is;-
1st WHERE DR_ACC = DECODE(DR_ACC,*'TXN'*,DR_ACC)
2nd WHERE DR_ACC = DECODE(DR_ACC,*'OFS'*,DR_ACC)
If you make this (don't understand the need for the decode, why is it here?!); -
DR_ACC in ('TXN','OFS')
And then use a case statement if you need to seperate out your two pairs of columns; -
case when DR_ACC = 'TXN' then TXN_BRANCH else null end as "Transaction Branch" (repeat principal for other 3 columns)
case when DR_ACC = 'OFS' then A.OFS_BRANCH else null end as "Offset Branch", (repeat principal for other 3 columns)
Make sense?
regards,
Robert. -
How to combine swm file with powershell
hi,I get strucked in "combining swm file with powershell",
there are two swm file in my volume D ,when i use the command "Export-WindowsImage -SourceImagePath D:\t.swm -SplitImageFilePattern D:\t*.swm -DestinationImagePath G:\install.wim -SourceIndex 1"
it told me:"file exited,you can't create this file".
but when i used dism /apply-image command it works well.
i tried the command "export-windowsimage",but not succeed.no,do you have any solution?
I think ,er,it may be a bug .
if you try the expand of "expand-windowsimage " in powershell.you will find it still not work -
How to combine update stmts with different filters and multi-columns?
Hi,
I found these following update stmts in one of our long running jobs. I'd like to see if it is possible to combine it in one update or merge stmt so I can reduce the scan time on the same table from 4 times to 1 time. But I'd need some expert suggestions for how to do that. Here are the stmts:
UPDATE table1 c
SET (polnum,polren,polseq,vehnum,
compgrp,prodgrp,uwsys,comp,
state,prod,rrdate,brand,
agycode,AGYCLASS,valid)=(SELECT DISTINCT polnum,polren,polseq,vehnum,
compgrp,prodgrp,uwsys,comp,
state,prod,rrdate,brand,
agycode,AGYCLASS,'A'
FROM table2 v
WHERE v.polnum=c.pol# AND
v.polren=c.ren# AND
v.polseq=c.seq# AND
v.vehnum=c.veh#)
WHERE c.polnum IS NULL;
UPDATE table1 c
SET (polnum,polren,polseq,vehnum,
compgrp,prodgrp,uwsys,comp,
state,prod,rrdate,brand,
agycode,AGYCLASS,valid)=(SELECT DISTINCT polnum,polren,polseq,vehnum,
compgrp,prodgrp,uwsys,comp,
state,prod,rrdate,brand,
agycode,AGYCLASS,'B'
FROM table2 v
WHERE v.polnum=c.pol# AND
v.polren=c.ren# AND
v.polseq=c.seq# AND
v.mainveh='Y')
WHERE c.polnum IS NULL;
UPDATE table1 c
SET (polnum,polren,polseq,vehnum,
compgrp,prodgrp,uwsys,comp,
state,prod,rrdate,brand,
agycode,AGYCLASS,valid)=(SELECT DISTINCT polnum,polren,polseq,vehnum,
compgrp,prodgrp,uwsys,comp,
state,prod,rrdate,brand,
agycode,AGYCLASS,'C'
FROM table2 v
WHERE v.polnum=c.pol# AND
v.polren=c.ren# AND
v.polseq=0 AND
v.mainveh='Y')
WHERE c.polnum IS NULL;
UPDATE table1 c
SET (polnum,polren,polseq,vehnum,
compgrp,prodgrp,uwsys,comp,
state,prod,rrdate,brand,
agycode,AGYCLASS,valid)=(SELECT DISTINCT polnum,polren,polseq,vehnum,
compgrp,prodgrp,uwsys,comp,
state,prod,rrdate,brand,
agycode,AGYCLASS,'D'
FROM table2 v
WHERE v.polnum=c.pol# AND
v.polren=0 AND
v.polseq=0 AND
v.mainveh='Y')
WHERE c.polnum IS NULL;
Table1 has 800000 rows, Table2 has 200 million rows. In table1, about 12.5% rows has a null polnum, so 12.5% data will be updated.
Thank you in advance with all your suggestions!the reason I never specified the joins is because I thought the joins were there to derive the Valid indicator, in which case they are not required if you are using the CASE statement. The join, "V.Polnum = C.Pol#" is still required as this is across all rows! If that is the case, then it can be simplified even more so;
update Table1 C
set (Polnum,Polren,Polseq,Vehnum,Compgrp,Prodgrp,Uwsys,Comp,State,Prod,Rrdate,Brand,Agycode,Agyclass,Valid) =
( select distinct Polnum
,Polren
,Polseq
,Vehnum
,Compgrp
,Prodgrp
,Uwsys
,Comp
,State
,Prod
,Rrdate
,Brand
,Agycode
,Agyclass
,case
when (Polren + Polseq=0) and (Mainveh='Y') then
'D'
when (Polren=0) and (Polseq>0) and (Mainveh='Y') then
'C'
when (Polren>0) and (Polseq>0) and (Mainveh='Y') then
'B'
when (Polren>0) and (Polseq>0) and (Mainveh!='Y') then
'A'
end as Valid
from Table2 V
where V.Polnum = C.Pol#
where C.Polnum is null;However if you are returning more rows than what you are expecting from the above update statement because the joins are being used to limit the data as well, then this might be more appropriate:
update Table1 C
set (Polnum,Polren,Polseq,Vehnum,Compgrp,Prodgrp,Uwsys,Comp,State,Prod,Rrdate,Brand,Agycode,Agyclass,Valid) =
( select v2.PolNum
,v2.Polren
,v2.Polseq
,v2.Vehnum
,v2.Compgrp
,v2.Prodgrp
,v2.Uwsys
,v2.Comp
,v2.State
,v2.Prod
,v2.Rrdate
,v2.Brand
,v2.Agycode
,v2.Agyclass
,case
when (v2.Polren + v2.Polseq=0) and (v2.Mainveh='Y') then
'D'
when (v2.Polren=0) and (v2.Polseq>0) and (v2.Mainveh='Y') then
'C'
when (v2.Polren>0) and (v2.Polseq>0) and (v2.Mainveh='Y') then
'B'
when (v2.Polren>0) and (v2.Polseq>0) and (v2.Mainveh!='Y') then
'A'
end as Valid_Flag
( select distinct Polnum
,Polren
,Polseq
,Vehnum
,Compgrp
,Prodgrp
,Uwsys
,Comp
,State
,Prod
,Rrdate
,Brand
,Agycode
,Agyclass
,Mainveh
from Table2 V
where V.Polnum = C.Pol#
) v2
where (v2.Polren = C.Pol# or v2.Polren = 0)
and (v2.Polseq = C.Seq# or v2.Polseq = 0)
where C.Polnum is null;As before, both remain UNTESTED! -
How to combine sql.Date with sql.Time into one?
I have a database where I keep dates and times separately, and getting date only and time only out of a java.util.Date is no problem thanks to the classes java.sql.Date and java.sql.Time. However, I need to read these values back in, put them back together, and then do date comparisons with java.util.GregorianCalendar. I tried just adding the millisecond long values together but that didn't seem to work, and I've tried setting the year, month, date, hours, minutes and seconds individually into a GregorianCalendar but I haven't figured that out yet. Certain queries work out better keeping the date and time separate in the database and it takes less bytes than a timestamp, so please don't suggest I use a timestamp!
Thanks for your help!
StephenYou can add the milliseconds (ms), but you need to use just part of it. For this example, let X be one more than the maximum number of units in time and also the minimum number of units in date. If we were using hours instead of ms X would be 24.
t = total ms from time
d = total ms from date
T = new combined time
T = ((d / X) * X) + (T % X);Add (the date, rounded to the nearest day) and (the portion of time which is less than a day). -
How to combine two applications with different workspaces in APEX
Hi,
Can anyone help out in merging two applications with different workspaces in APEX 3.2 ?
Thanks in advance,Hello Satya,
>> I am Satya …
Please take one more step to help us and update your forum handle to something friendlier than user123… Thanks.
>> Can anyone help out in merging two applications with different workspaces in APEX 3.2 ?
This is not a trivial task.
You didn’t mentioned if both workspaces sharing the same APEX instance, or they are on two different instances (machines). I believe the latter is a pre-condition to a success.
First you need to remember that importing an APEX component, like a single page, is possible only to the same application that it was exported from. This is still valid if you have the same workspace on two separate APEX instances – one is an import of the other (which makes it an identical copy). Still, the application ID must be the same, or you’ll get the following error: “This page was exported from a different application or from an application in different workspace. Page cannot be installed in this application.”
You can’t simply manipulating the export file, if the two workspaces are sharing the same APEX instance, as all workspaces on the same instance shares the same APEX metadata files, and you’ll receive a “unique constraint violated” error messages. That means you can’t import one application into the workspace of the other, even if you are using a different application ID.
As far as I can see, the only viable way of doing an application merge is to have two identical workspaces, on two separate APEX instances. The two applications should share the same application ID, although this parameter can be changed in the import file. You should export the page in one application – on the first instance – and import it into the other application – on the second instance.
You should also make sure that the exported page ID doesn’t exist on the target application, otherwise it will be replaced by the new imported page. Also, if the imported page include references to shared components that are not defined on the second application, it might also pose a problem.
As I said, this is not trivial. The benefits are mostly depend on the amount and complexity of the pages you want to merge. If they are not many, and simple, you should consider just re-creating them on the target application. If they are very complex, the merge might fail anyway.
Regards,
Arie.
Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all. -
Combine my Icloud with another user Icloud
How to combine my Icloud with another persons Icloud?
Hi Derek,
In general, with iCal you can share your calendars, but only you can edit them. This means that you have your calendar(s) that you publish and the other user(s) subscribe to your calendar. They would publish their own calendar if they have event they want to share.
To publish calendars locally on your machine (so all users can view them) you can set up a WebDav server on your machine (see http://www.shawnwall.com/teach/webdav-ical.php for the instructions I used - not too hard to follow), or you could try CalTalk http://pknet.com/~joe/caltalk.html which is an application that does something similar.
Best wishes
John M -
How to link tomcat 5 with apache 2 on win2k?
i've just installed the new tomcat 5.
i need help on how to combine tomcat 5 with apache2.
so can anyone give me some URLs?
thanks very much.Have a look at http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jk2/index.html . I believe it's works the same way as for Tomcat 4.1.
The following steps briefly describe what to do:
1. Install the mod_jk DLL (if running on Windows) in your Apache\modules directory. You can find it on http://jakarta.apache.org/site/binindex.cgi as JK 1.2 'Binary Releases'. (Installing the JK2 Connector is more complicated.) Just copy it over.
2. Create a file workers.properties in you Tomcat\conf\jk directory with the following content:
# Definiert worker fuer Tomcat
worker.list=ajp13
# --- Settings for the ajp13 worker
worker.ajp13.type=ajp13
worker.ajp13.host=localhost
worker.ajp13.port=8009
You may need to make amendments if you're not running it on the same host or port.
3. In your Apache conf directory edit the httpd.conf file. Add the following lines:
# load the module you just added
LoadModule jk_module modules/mod_jk_xxx.dll
# set path for your settings
JkWorkersFile "D:/Programs/jakarta-tomcat-4.1.24/conf/jk/workers.properties"
JkLogFile "D:/Programs/jakarta-tomcat-4.1.24/logs/mod_jk.log"
JkLogLevel info
<VirtualHost *>
ServerName your.server.name.com
# link all the static files directly to your tomcat directory. Ignore that if you have them somwhere else.
Alias /kleika/1_00 "D:/Programs/jakarta-tomcat-4.1.24/webapps/yourwebapp"
<Directory "D:/Programs/jakarta-tomcat-4.1.24/yourwebapp">
Options Indexes FollowSymLinks
DirectoryIndex index.html index.htm index.jsp
</Directory>
# all requests to this path will be forwarded to Tomcat
JkMount /yourwebapp/* ajp13
</VirtualHost>
I hope that helps.
Steffen -
HI can anyone tell me how to combine 2 characters with are comming from R/3 and populate into a BWObject using upper case in transfer rules.
BWObject = upper(Field1) + upper(field2)
Thanks,
Kris.Hi KriS,
Try this code .
data : lv_len1 type i.
shift field1 left deleting leading space.
lv_len1 = len(field1).
shift field2 left deleting leading space.
field3 = field1.
field3+(lv_len1) = field2.
Regards
Nimesh -
How to watch Mp4 Movies With same clarity (HD,1080p,720p) in Ipad3
Hi
I am changing my 1080p and 720P videos into MP4 to upload in IPAD 3 , but they are loosing their quality on IPAD....How to fix it..How can i watch them with same clarity on IPAD3..
Thanks In advanceFreeStudio from DVDVideoSoft
-
How to encode movies in 720p HD or 1080p Full HD with Dolby 5.1 ?
I want to find out if anyone knows exactly what's the name of the program that the iTunes Store uses to encode movies in 720p HD with Dolby 5.1 surround sound playback? I have some DVD's and some DivX files and I want to convert them to the same file type and resolution as the new movies available in iTunes in 720p HD with Dolby 5.1. Also is it available on Windows or just Mac, if so does it work with the old G4 power PC processor? Is it possible to encode the movies at a higher resolution of 1080p? If so how??? Does iMovie HD capable of doing this?
Any help with the name of the program and the settings I should use to encode in the same manner as the iTunes Store would be apprecciate it....Hi f
Guessing department.
With iMovie (any version) and iDVD. Don't think that is possibly !
With FinalCut Studio (including Compressor and DVD Studio pro) - Most probably - near to certainity)
Yours Bengt W -
60fps footage in 30fps timeline plays with artifacts problem
I have to types of footage for a project: 720P 60fps shot in avchd and 1080P 30 shot with an HDV camera.
I am trying to combine the clips in the Premiere pro CS 4.1 AVHD 720P30 sequence preset. I do have to resize the 1080P footage but that is fine. The 60P footage plays at the correct speed, but it is filled with artifacts during playback in the timeline.
When I view the 60fps footage in the AVCHD 720P60 sequence preset, it playse back smoothy with no artifacts.
Am I missing a setting (such as frame blend maybe) or should I just try to edit everything in a 72060fps sequence and hope the hdv footage will be okay?
Thanks!That's strange--the Source monitor is, as far as I'm aware, frame rate and format-agnostic, and should playback whatever is in it at its native frame rate. Unlike a sequence (and therefore, the Program monitor), it bends to the will of the material it contains, regardless of what it is. I'm indeed bewildered by this, and I'm sorry to say I don't have any idea what the problem might be. Did you change the interpretation of the footage after you imported it, or is it "as-is"? What is the playback quality setting for the source monitor?
EDIT: By way of example, the screen shot below shows a 29.97P clip in the source monitor, and then the same clip and frame in a 23.976 sequence. Frame Blending is on for the clip in the sequence, resulting in the smear, but that's not a problem in the source monitor: -
How about using a 60fps video for a smooth slow motion effect in a 30fps project ?
Hey all,
I happen to have a video camera that is able to shoot either in 720p/60fps or 720p/30fps.
As you guessed it, 60 fps mode is very useful for action sports when you want to do some slow motion effect running very smoothly.
I have few questions I would love to be answered, and I was not able to find answers till now.
Here they are :
1/ If I want my final video file to be, let's say, 25 fps, is it mandatory that my project is 25 fps too ?
What will happen if I do a 30fps project and that I export to a 25fps file ? Does Premiere simply remove some extra frames ? Or will it lead to a longer video ? What consequence on the final result if frames are removed ? I mean, will I be able to see any difference or will the difference remain theorical ?
2/ Let's say I have both 30fps and 60fps videos. I set my project to 30fps. If I import my 60fps video to the timeline, it will be adjusted to 30fps and some frames disappear to keep the duration the same. Okay, this is clear to me.
But now, what if I import my 60fps to the timeline, but set the speed to 50% ? Will Premiere apply the 50% to the original file (therefore I should have all the frames displayed on the timeline : 60/2=30 fps), or to the 30fps-adjusted file of the timeline, leading to some jerky footage?
3/ If I want to use my 60fps for slow motion purpose in my 30fps project, would it be a good idea to right-click on this file in the project windows, going to the "modify" menu to set the image frequency to 30fps ?
Because while doing so, if I drag the file to the timeline, I noticed it would last 2 times longer (resulting in a slow motion video) Does that mean that ALL the frames of the original video are displayed ? Can someone tell me what exactly does Premiere ?
I would be very grateful if someone could tell me what are the correct settings to chose in order to realise the best slow motion videos as possible.
Thanks in advance !With due respect... this does not answer my question and does not help me that much , but anyway, thank you for the very constructive answer ^^.
I'm not sure I would even have considered doing this by myself...
I hope I do not get this kind of answer because you feel like my question was silly or unpolite... To my mind this was a pretty serious question.
Shooternz, next time you need to go 150 km far away from where you are, go by feet rather than with a car, I'm sure you will have plenty of satisfaction too. Just cross the fingers for you not to be in a hurry while it's raining outside.
Well, I may be naive but i thought some experts already had the answer to this (I guess I'm not the only one who intend to do some slo mo), and would have been kind enough to share this knowledge with me. That's what sometimes happens in communities.
Please note I do not intend others to do the job for me, I'm just asking if someone already knows the answer.
I asked this question because I couldn't find any documentation about this, and I guess asking on internet was the next step, as testing would be like the last resort, being very time consuming.
It was easy to check the effect of dragging a file to the timeline to see if it played normally or not, but it's definitely not to count and compare each frame of some sample file to find if some are lacking, or have been doubled or what....
I assume I would be very happy with just a simple theorical answer either...
So once again, if someone already has been into such questions, I would really pleased him or her to share or report what they experienced. Thanks in advance.
Maybe you are looking for
-
How to always rotate objects around the same point, even using the right-click menu?
I need some of my objects to always rotate around the same point. How can I select a point which will stay that way? Using the rotate tool resets after deselecting. Also, I'd like to rotate objects around a certain point even when using the right cli
-
I'm using Win7 64, the latest Fire Fox upgrade, I can't find which version it is. And where did the refresh button go? Fire Fox was fine the way it was, now I have to waste time tweaking all this. Thanks
-
When I send an e mail from my device using my business account, it always appears at the receiving location as my personal e mail account. I have my business account set as default so not sure why this is happening. Any suggestions??
-
Hi, I have date data in a CHAR(8) column called DOB_TXT. The format of the data is MMDDYYYY. I need to store this data in a DATE datatype. To do this I created a column called DOB in the same table. I am trying the following update statements: update
-
HT5278 iOS 5.0.1 Software Update
How do I download iOS 5.0.1 Software Update for my 2008 itouch? Any ideas?