How to combine rtp data containing video and audio?

Hi
I have a problem. I was examining with AVTransmit3.java and AVReceive3.java. I found that AVTransmit3 sending video and audio with different ports. It's okey as it is done as JMStudio. but my question is how can I receive this packets as raw bytes and combines them into one media file to play at a time in a player. May be very fundamental question but tough for me as i m novis as jmf programmer.
waitin for repply...................

Look in the JMF Guide regarding multiplexors and demultiplexors. It give the whole breakdown of how this works (and I think examples).

Similar Messages

How to get different lengths of video and audio loops?

I have a menu loop with a video and audio component. (I'm using the "pass through" theme). I set the video component for 15 seconds, but then the audio repeats after 15 seconds. I want the audio to complete the song and then repeat. Is this possible?

Welcome Robert
Click Here / Help Menu:

How do i delete sections of video and audio at the same time

hello, i made a video with sound and overlapping voiceover i want to know how do i delete a section of the video and the voice over without having to resynch everything again?

In Final Cut Pro X, this is easy. You drag to select all these clips. Then use the Blade Tool.
However, in iMovie, it is not as straightforward. You can edit the camcorder clip and its audio, but any music tracks, voiceover tracks, etc. will not be edited with it.
A workaround is to use the SHARE menu to SHARE/EXPORT TO QUICKTIME using Apple Intermediate Codec to retain as much quality as possible. Then import this new movie into an Event. New all the audio is married to the video and you can edit everything together.

How to combine 2 tracks of video and one title scroll?

My end credits montage - under a 1 1/2 min scroll - is too complex for the Compressor : it stops at 99% done. If I combine these 3 tracks of video into 1 it will work, but I can't find the video mixdown function in the manual. Could you please help me? Thank you.

Ruth,
Basically, you have two options. The first option is the one I described above. That will give you ONE video file with one video track and two audio tracks. You can use that file in Compressor, DVD Studio Pro, import it back into FCP for more editing or use it in just about any other video application. In your case, it would seem that you'd want to import it into your FCP project, and use it to replace the three existing credit scroll tracks that you're having a problem with.
The second option is to nest. In FCP youu select (select = highlight) the clips that you want to include then go to Sequence->Nest Items. The clips you selected (again, selected clips will show up as highlighted) will become like one clip with one video track and up to two audio tracks. If you double-click a nest in the Timeline, a new Timeline window will open and show the contents of that nest, with each clip in its original track and position. You can edit the contents of the nest, then go back to the main Sequence and any changes you made will be there.
That said, it still doesn't address your original issue: "My end credits montage - under a 1 1/2 min scroll - is too complex for the Compressor : it stops at 99% done." In what way would a credit scroll be too complex? By the way, there is no such thing as a "video mixdown" command or function in FCP. But you can essentially do the same thing by using one of the two methods above.
-DH

How do I save just the video and audio I need for a project

I typically run 3-4 video cameras at an event that lasts 2 hours, but only want to keep about 30-60 min of the video. I don't always have the time to do more than a rough edit and am looking for a way to: 1 maintain the original quality , and 2 get rid of the excess. The rough cut would obviously take only i/4 to 1/2 the 84GB of space the raw video does.
What format can I export it to that will do this. My cameras all record in ACVHD and I dont see that as an option for export.

First I would find out what the pixel size of the frame is. Next export your photos to a folder on the Desktop using Custom size requirements and put in the maximum frame pixel dimension and a quality level of medium or less (depending on the quality of the frame). Give the folder a name like "DigitalFramePhoto" and copy that folder to the SD card. You'll need a card reader to do that.
The reason you need to put the folder into a folder is that the SD card is formatted for PCs and will only take a limited number of files at the root directory. Putting them into a folder and loading the folder gets around that limitation.

HT204370 how do i fix poorly synchronised video and audio on a hd download?

Purchased TV show from itunes - watching on a Samsung notebook running Windows 8

Depending upon what country that you are in (TV programmes can't be re-downloaded in all countries) then try deleting that programme from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes.
If you aren't in a country where you can re-download TV programmers or if it re-downloads with the same problem then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

How do I send raw video and audio data to FMLE?

Hi,
I have raw video and audio data on CPU memory.
How do I send them to FMLE?
Is there sample code or SDK?
Thanks for your answer.

Hi, Burzuc.
Raw video and audio data are from a video capture board like Blackmagic Design's DeckLink or other's.
I want to stream them after some processing by my application.
Regards.

Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

You may need a 3rd party application to view the DVD in a wWindows format such as
http://flip4mac-3.en.softonic.com/mac
https://www.macupdate.com/app/iphone/5758/vlc-media-player

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

Kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 3/4/2009)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
See bottom section on AIM 6.5 and 6.8 on XP and Vista.
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or receiving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ability to start either an Audio or Video chat from one end to a recipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this.
Between both of you.
At least one camera (Mac end works better)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to video chat One Way but sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the paragraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
PC end gets AIM 5.9 or Trillian Pro.
The PC end allows the app through the XP Firewall.
AIM 5.9 needs "Tuning" to Camera and Mic.
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) One-Way.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable to AIM 5.9.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
<hr>
AIM 6.5 and 6.8 On Vista and XP
AIM 5.9 or earlier can not be installed on Vista.
AIM 6.5 and 6.8 use a new video codec with a description of "Real Time IM"
AIM have an FAQ page about this
Below the pics is this quote
What do I need to use Real-Time IM?
You and your buddy need to be using AIM® 6.8 or higher to use Real-Time IM. Unfortunately, Real-Time IM does not yet work with older AIM clients, iChat®, or AIM® for Mac®.
See items 5 through 13 on this page for alternatives including Web Browser based ones.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
This is the 2nd version of this tip. It was submitted on Saturday; April 4, 2009, 9:52 PM by Ralph Jonhs (UK).
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

This is the one I have been wating for
http://discussions.apple.com/thread.jspa?threadID=406152
kichat: Look and sound great in iChat!
Ian's First FAQ
Also New Today
http://discussions.apple.com/thread.jspa?threadID=121775
kichat: FAQ 2 - How to get my router to work with iChat?
And
http://discussions.apple.com/thread.jspa?threadID=121665
kichat: FAQ 1 - What do I need to start in iChat ?
11:20 PM Thursday; March 16, 2006

How to transport the data contains in the table from development to product

How to transport the data contains in the table from development to production.
Please let me know ASAP.

Hello Dilip
Create a workbench request and add the following entries to the request:
Object key: R3TR TABU <name of z-table>
For this object add the following value key:
- client-independent table: '*'
- client-dependent table (e.g. client 100): '100*'
See also: [SAP Network Blog: Transport Table Entries|/people/community.user/blog/2007/01/07/transport-table-entries]
Regards
Uwe

Hello, how can i get my photos,videos,and contacts of my iphone transfer to my pc. As i have lost my iphone 4

Hello, how can i get my photos,videos,and contacts of my iphone transfer to my pc. As i have lost my iphone 4

If you don't have your iPhone anymore, you can't access the data on it remotely.
However, if you are syncing to iCloud, you can set up iCloud syncing on your computer and at least get your contact info.
iCloud: Set up iCloud on your devices
You might also think about putting your device in lost mode or erasing it:
What steps should I take if I misplace my device?
If you ever misplace your device—whether it’s just lost or you think it may have been stolen—you should put it into Lost Mode immediately using Find My iPhone.
Lost Mode locks your screen with a four-digit passcode and lets you display a custom message with your phone number to help you get it back. You can also remotely erase your device if needed, and your custom message will continue to display even after the device is erased.
While Activation Lock works in the background to make it more difficult for someone to use or sell your missing device, Lost Mode clearly indicates to anyone who finds your device that it still belongs to you and can’t be reactivated without your password.
To put a device into Lost Mode, sign in to icloud.com/find from a Mac or PC or use the Find My iPhone iOS app.
For more information, read what to do if your device is lost or stolen.
copied from Find My iPhone Activation Lock

How can I use QuickTime to make a screen recording that has both video and audio?

How do use QuickTime to make a screen recording that can be saved with both video and audio together?

do you know of any software that would record a QT movie playing on my Mac screen with both audio and video?
I have used Ambrosia's Snapz Pro X ($69) for years, but they are currently upgrading their Kext (Kernel Extension) software for changes inroduced by the Lion release so it might not be your best bet at this time. I also use ScreenFlow but it is a combination capture and editing utility which runs $99 and may include more features than you may need or will use. Have also tried Screenflick ($29) which, to some extent, appears to have a functionality somewhere between that of Snapz Pro X and ScreenFlow. It is a bit more complicated to set up but for the price might be the best bargin at this point. All three can capture the entire screen or a portion thereof, with or without mic/line and/or system audio. (Or at least they all will as soon as Ambrosia updates its Kext routine.)
Here is a URL link posted by QTKirk three days ago to an article that recaps of a number of currently available third-party screen capture apps from around the world several of which may interest you: http://mac.appstorm.net/roundups/utilities-roundups/10-screen-recording-tools-fo r-mac/

How can i stream video and audio from macbook air to my tv?

how can i stream video and audio from macbook air to my tv?

Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.

How do i start video and audio at the same time in ios

How do i start video and audio at the same time in ios?
I have tried a lot of different ways but i cant figure it out?
I can get the sound and animation (timeline) to start playing.
There is no problem to start the video and the animation at the same time.
But i cant get both the video and the audio to start playing when i press a button.
It works great in OSX and on windows?
Here is an example:
// insert code for mouse click here
// Play an audio track
sym.$("_1")[0].play();
// Play a video track
sym.$("host")[0].play();
// Play the timeline at a label or specific time. For example:
// sym.play(500); or sym.play("myLabel");
sym.play("marker1");

If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.

How to combine rtp data containing video and audio?

Similar Messages

Maybe you are looking for