How to come out of standard transaction after giving error message
Hi Experts,
I have one requirement like i need to validate a field in standard transaction ME21N. If user enters wrong value then i have to give error message and leave the transaction ME21N immediately. If i do the code with error message then i struck in the same screen of ME21N(but i need to come out of ME21N).Can anybody help me for this particular scenario.
Regards,
Bujji
Ahhh, I see, this is a different story, now.
How about issuing an Information message, and saying LEAVE TO TRANSACTION 'ME21N'.
Message I001(00) with 'THere is some problem, transaction ending'.
leave to transaction 'ME21N'. " Or you may be able to use SY-TCODE here.
Regards,
Rich Heilman
Similar Messages
-
After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.
I had this same problem with what's app. There is a new update for the app on the app store which is compatible with ios8. Update the app, or delete it and re-add it. I found a lot of apps weren't compliant with ios8, but after updating everything worked fine.
-
How to find out the standard smartforms?
how to find out the standard smartforms?
Hi Sunil
You just go to transaction <b>SE80</b>(Object Navigator)
and in that enter <b>Package BC470</b>
which contains the standard Programs on Smart forms ,
I think there you can find some Smart forms in those programs.
I hope it will help you.
If it helps reward with points.
Regards Rk -
How to re-download Adobe Standard XI after laptop crashed?
How to re-download Adobe Standard XI after laptop crashed?
You can find the installer on http://prodesigntools.com/tag/ddl
-
How to find out the standard info stucture for a customized IS in LIS
Hi All
I have to run the statistical set up for the customized info structure S763 for the application plant maintenance in LIS. But i dont know whether it was copied from a standard SAP info structure or it was enhanced from a standard info structure.
I have even checked out all the standard IS for plant maintenance but it is not matching. The closest match is S063 but a few characteristics and a key figure is missing.
Could anybody guide me how to find out the standard info structure?
Any help would be of great help.
Regards
SaddyHi Ganesh
No..it didnt solve my problem. MC23 only displays the info structures. I have a customized info structure S763 which was created long time back. Im not sure whether it was copied from a standard info structure or enhanced from a standard info structure.
I have to give the source info structure name to run statistical set up. The closest one which matches with the S763 is S063 but it is missing few characteristics and key figure.
does it means that the IS S063 was enhanced?? Am i right?? If it was enhanced how will i run the statistical setup for the same...
I hope i have explained clearly.
Do provide ur valuable input.
Regards
Saddy -
****How to come out of the infinite loop by passing a perticular message
Hi all,
Can You Pl expalin me in detail "How to come out of the infinite loop by passing a perticular message in BPM Scenarios"
Thanks,
SrinivasaHi Potharaju,
For this al you need to do is define an IP with two branches. One of the branch receives message of a particular type only. And the other branch is used for stopping the message processing. This is achieved using the correlation. Correlation makes sure that the message of the first type goes to the first branch only and that the message of second type should go to the second branch only. Now when the message of the second type is received, the control comes out of the infinite loop.
Hope it makesit clear.
Regards,
Sanjeev. -
How to make changes in standard transaction ME51N.
Hi,
Can anyone tell me how to make changes in standard transaction ME51N.
I want to call transaction AS01 by clicking on standard button create asset. Please do the needful.
Regards.
AniruddhaHi anirudda
As i understood from your question is that you want to add a new field 'CREATE ASSET' on me51n screen.
If i am correct you can use 'MEREQ001' enhancement for this purpose and you can write you code in the exits available in this enhancement.
Please check the documentation of this enhancement for more info.
(Use Smod for this purpose)
I hope it is helpful.
Reward points
Thanks,
Prasanna -
My phone got into blind people(voice guidance) mode how to come out of it??
my phone got into blind people(voice guidance) mode how to come out of it, i switched off my mobile even though it is in the same mode plz help me out as early as possible.
Hi 9l and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I have removed your IMEI for your privacy; however can you please advise what assistance you would like?
What are your thoughts about this forum? Let us know by doing this short survey. -
How to activate screen fields of VA01 after an error displayed
Hi
I have an issue working with USEREXIT_CHECK_VBAK, which affects transactions VA01, VA02 and VA03.
I have written the logic to validate the combination of Sold-To and Ship-To, against the Partner Table KNVP, under USEREXIT_CHECK_VBAK. And, if a user enters wrong combination of Sold-To and Ship-To, say in transaction VA01, USEREXIT_CHECK_VBAK will be triggered and the validation error message will be displayed. So, once the error is displayed, all the fields available on the screen are getting inactive. The requirement I have is that, after the error message is displayed, both the Sold-To and Ship-To fields should be ready for input again by the user, and the error should be displayed each time user enters wrong combination, but the fields should always be ready for input.
I have tried working with USEREXIT_FIELD_MODIFICATION, to no avail.
Could anyone help on this, or give me an idea on how this requirement could be achieved.
It's urgent.You can try it with warning message instead of error message.
Or else have a lok at below link which gives the details of VA01 exits so that u can find out the corresponding exit where you can make the changes.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers -
I have rent couple movies which I cannot play, when i play the movies it come out the follow notice
loading
AN ERROR OCCURRED LOADING THIS CONTENT.
TRY AGAIN LATER
someone knows why is this happening ? how can I get my money back?How did this get resolved?
-
PROBLEM: Cannot print from Photoshop
After restart error message appears:
— “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
• All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
The printer printed fine until about 2 weeks ago when this error message appeared. Printing continues from Pages, I-photo, preview etc. — only Photoshop fails.
The printer has been turned on and off, as have open documents been closed and open etc.. Preferences reset. Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
Attempting unsuccessfully to print to Epson 3880
What Adobe support will be of help.
Robert Darling — 2/19, 20, 21,22,23/2015Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
After each Error Message,the follwing messages are in Scheduled in ECC SMQ2
Hello Everyone,
After each Error Message thrown from ABAP Proxy, the next following messages are in Scheduled in ECC SMQ2 tcode. Can anyone suggest me how to overcome from this issue?
Thanks,
PrashanthHello,
Please, any one respond to my question. I have been trying to get out of this issue but could not.
Thanks,
Prashanth -
Okay, so I recently got all the products I wanted from CC via the student subscription. It was a bit of a pain getting everything working, as windows explorer crashed and reopened during installation of CC and during an update. Once I finally got in and got everything installed, I thought I was golden, it was then that I discovered my troubles had only just begun. Whenever I tried to open a program it either closed almost immediately after Startup or closed after giving the message "Could not validate license". Thus far I have not found a solution, as the much touted log out and log in method failed me.
Any help in this area would be greatly appreciated as I am honestly at a loss on what to do.
Technical details:
The programs I tried were After Effects, Audition, Photoshop and Premiere.
I am using Windows 7.Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/ -
How to keep the field open for input with error message in report program
Hi,
Need a help in solving the below issue.
"How to keep the field open for input with error message in report program"
Regards,
C.Shasiraj.Hi...
you have to use the event:
<b>AT SELECTION-SCREEN ON <FIELD> EVENT.</b>
u have to give an error message in this event.
Consider the following <b>Example:</b>
<b>PARAMETERS : NUMBER TYPE I.
AT SELECTION-SCREEN ON NUMBER.
IF NUMBER = 10.
MESSAGE 'Number vakue is 10' TYPE 'E'.
ENDIF.
START-OF-SELECTION.
WRITE NUMBER.
</b>
in this if u give the value of number = 10, it will not proceed further, if u give some other value other than 10 you will proceed further...
Execute this program once u will understand....
also Consider the following links :
<b>Regarding events:</b>
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a237d9b511d1950e0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a23ad9b511d1950e0000e8353423/frameset.htm
<b>Regarding messages:</b>
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
This is very useful.......
Reward points if useful....
Suresh.... -
Trying to download I tunes 11.5. Keeps giving error messages. How will I solve it?
How are you trying to download it, and what's the error message that you are getting ?
You should be able to download it on your computer from : http://www.apple.com/itunes/download/
If that's not working then have you tried clearing the browser's cache/history, rebooting your computer, and/or tried a different browser ?
Maybe you are looking for
-
I used Duplicate Annihilator to isolate dups in iPhoto on my iMac. At the end of its search, it told me it had marked the word duplicate in the comments / description field. How do I find and delete the marked photos?
-
Problems with importing .MP4 file and the audio in FCP 6
Hi all, I am pretty new to Final Cut Pro and have just approached my first project. I have a Samsung VP-MX20 http://www.samsung.com/uk/consumer/detail/spec.do?group=cameracamcorder&type=cam corder&subtype=flashcamcorder&model_cd=VP-MX20/XEU&fullspec=
-
HP Monitor going to sleep on start up
Ok, I've dealt with this problem long enough. I have an HP pavilion Elite, hpe 400f. Monitor worked great on it, then one night while I was checking my email, the picture went scrabled, and ever since I am faced with a "Monitor Going to sleep" error
-
Is it possible to link several vendor accounts with a customer account?
Hello, We have linked a vendors with his corresponding customer, so in FBL5N report, when inside this customer, we can see all of the receivable items of him as a vendor. The question is: We have a customer account number that corresponds to several
-
Add Digital Signature Using C# and Acrobat SDK
Hi everybody! Please, how can I digitally sign PDF documents using Acrobat Professional 8 API and C# language? I know that I need use JavaScript APIs (IAC) but I can't find anything really helpful in the Acrobat SDK Documentation. Could anyone post a