How to commit a form using ctl S

Hello,
I'm new to oracle and I was wondering how can I commit a form by pressing ctl + s ?
Thanks a lot.

Hi,
This depends on the frmXXXX.res file you have configured in your formsweb.cfg config file.
These files are located on your <oracle_devsuite_home>/forms directory (assuming your on 10gR2 version, for 11g please take a look at this thread {thread:id=1053911} )
# FMRWEB.RES is the key definition file for webforms. The syntax is:
#    JFN : JMN : URKS : FFN : URFD   (whitespace ignored)
#      JFN = Java function number
#      JMN = Java modifiers number
#     URKS = User-readable key sequence (double-quoted)
#      FFN = Forms function number
#     URFD = User-readable function description (double-quoted)
for example frmpcwebf.res maps
121 : 0 : "F10"            : 36 : "Valider"
and frmweb.res maps
83   : 2 : "Ctrl+S"         : 36 : "Commit" you can also configure your res file regarding your needs.
if you don't have a .res configured it takes (I think) a default configuration regarding the NLS parameter of your devsuite installation.
Hope this helps
Regards,
Jean-Yves
Edited by: JeanYves Bernier on 11 mars 2011 22:54

Similar Messages

How to create arabic forms using adobe central forms

How to create arabic forms using adobe central forms

Any luck here? I have just a subset of your challenge, i.e., I want to get forms designed in Designer 8.2/Acrobat 9 to work in Reader 7.0.5
Thanks!

How to create interactive forms using Webdynpro for ABAP

Hi All,
I have worked on Webdynpro for ABAP, and now I want to start creating adobe interactive forms using Webdynpro for ABAP. Please provide me with basic examples to start.
Also Please provide me introduction as how interactive forms are related to ISR senarios.
Thanks in Advance.
Phani

Hi Varun!,
Can you please send me also the above said step by step tutorial on [email protected]
and can you please also guide me any configurations to be done on Sneak Preview SP12 before developing the interactive forms.
Thank you in advance.
regards
Ravi

How to run a form using tree node selection??

hi...
i have populated a tree with all the form name.There is a particular id for every form.i want to show a form using tree node selection.What i did...i write a trigger in button's click event when the tree node is selected then i get a id.if id=1 then open_form('test.fmx').when i want to execute this code then it is showing the same form 2 times.Can anyone help me to solve my problem?If so plz tell me what code i have to write to show a form using node selection?.

I've done the same thing, and i think it works fine.
Check this code (Sorry for the long post, but i cannot find how to attach files.
PACKAGE menu_pk IS
--Initialization of the menu.
procedure Init;
--Called from WHEN-TREE-NODE-EXPANDED
procedure Expanded;
--Called from WHEN-TREE-NODE-ACTIVATED
procedure ExecuteCommand;
END;
PACKAGE BODY menu_pk IS
MENU_NAME constant varchar2(30) := 'menu.menu';
cursor c_menu(pRoot in varchar2) is
select apm_code, apm_parcode, apm_descr, decode(apm_type, 0, Ftree.EXPANDED_NODE, Ftree.LEAF_NODE) apm_type,
decode(apm_type, 0, 'menu', 1, 'form', 2, 'report') || '.ico' apm_icon
from app_menu
where apm_parcode = pRoot
order by apm_code asc;
procedure Init is
     new_node ftree.node;
begin
     for i in c_menu('root')
     loop
new_node := Ftree.add_tree_node(MENU_NAME, FTree.ROOT_NODE,
Ftree.PARENT_OFFSET, Ftree.LAST_CHILD,
i.apm_type, i.apm_descr, i.apm_icon, i.apm_code);
     end loop;
end;
procedure FillNode(pNode in FTree.Node) is
     new_node ftree.node;
begin
     for i in c_menu(FTree.get_tree_node_property(MENU_NAME, pNode, FTree.NODE_VALUE))
     loop
new_node := Ftree.add_tree_node(MENU_NAME, pNode,
Ftree.PARENT_OFFSET, Ftree.LAST_CHILD,
i.apm_type, i.apm_descr, i.apm_icon, i.apm_code);
     end loop;
end;
procedure DeleteNodeChilds is
node FTree.NODE;
begin
     loop
node := FTree.Find_Tree_Node(MENU_NAME, '',
     FTree.FIND_NEXT_CHILD, FTree.NODE_VALUE,
     name_in('system.trigger_node'), name_in('system.trigger_node'));
          exit when Ftree.ID_NULL(node);
          FTree.delete_tree_node(MENU_NAME, node);
     end loop;
end;
procedure Expanded is
begin
     if (FTree.GET_TREE_NODE_PROPERTY(MENU_NAME, :system.trigger_node, FTree.Node_State) = FTree.EXPANDED_NODE) then
     menu_pk.FillNode(name_in('system.trigger_node'));
     else
          menu_pk.DeleteNodeChilds;
     end if;
end;
procedure ExecuteCommand is
cursor c_command(pCode in varchar2) is
select apm_form, apm_type
from app_menu
where apm_code = pCode;
fCommand c_command%rowtype;
fMenuCode varchar2(20);
begin
     -- if it is as menu node then exit.
if (not FTree.Get_Tree_Node_Property(MENU_NAME, :system.trigger_node, FTree.NODE_STATE) = FTree.LEAF_NODE) then
     return;
end if;
fMenuCode := FTree.Get_Tree_Node_Property(MENU_NAME, :system.trigger_node, FTree.NODE_VALUE);
     open c_command(fMenuCode);
     fetch c_command into fCommand;
     close c_command;
     if (fCommand.apm_type = 1) and (fCommand.apm_form is not null) then
          globals.Set_MenuChoice(fMenuCode);
          OPEN_FORM(fCommand.apm_form);--, ACTIVATE, SESSION);
     end if;
end;
END;
The menu table definition follows.
create table APP_MENU
APM_CODE VARCHAR2(10) not null,
APM_PARCODE VARCHAR2(10) not null,
APM_DESCR VARCHAR2(40) not null,
APM_TYPE NUMBER(1) not null,
APM_FORM VARCHAR2(50)
alter table APP_MENU
add constraint APP_MENU_PRI primary key (APM_CODE);
Hope this helps

How to have Infopath form use Sharepoint Domain credentials

I have built a for in infopath which is published to a library on Sharepoint 2013. This form is filled out by certain users and when its completed it gets moved into a subfolder. We then provide a link to a client who has a domain account with restricted
access to just this folder of sharepoint. They can view this form and any others we put in this folder.
The form has 2 views. The first is the view our staff sees when filling it out. There are some hidden sections in there for us that the client does not need to see. So there is a second view which is read only and I have taken away the option for them to
switch views so they can't go back to our internal view.
What I would like to happen is that the form can somehow detect by the domain login info from sharepoint, what user is opening the form and switch views based on that. What I can't figure out how to do it to have the form pull domain credentials from the
sharepoint site and use those a a variable when opening the form to set the view.
I believe I am on the right path what trying to setup a data connection but I am just missing something. I found this great guide http://www.pointgowin.com/seethepoint/Lists/Posts/Post.aspx?ID=55 but now when I open the form I get a warning stating "You
do not have permissions to access a SharePoint list that contains data required for this form to function correctly." Also I still can't seem to pull the username.
Can someone help me out? Point me in the right direction? Thanks.

Hi,
According to your post, my understanding is that you wanted to have Infopath form use Sharepoint Domain credentials.
When you use Claims-based authentication, your user name is prefaced by “0#.w|”. So for example, if your user name is SuesDomain\jdoe then your Claims-based user token will be, without
the quotes: “0#.w|SuesDomain\jdoe”
InfoPath can’t handle that, or more specifically, the UserProfile.asmx method GetUserProfileByName method can’t handle that. InfoPath tries to pass in your Claims-based user token instead
of your domain\User Name.
You have an authentication problem where the currently logged in user is not allowed to hit the web service, so you get an Access Denied 401 authentication error
To resolve the issue, you can refer to the great blog:
SharePoint 2013, InfoPath and Claims – GetUserProfileByName
More information:
InfoPath over Claims Authentication (SharePoint 2010 & 2013)
SharePoint 2013 Business Connectivity Services Search and Profile PageMetroStar Systems Blog
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

How to create a form using dblink

dear all
I am using Ora11g Xe, i have created a dblink of another database user; now i would like to create a form using apex, would anybody can guide me how to go about it? i have tried with normal procedure of creating a form (using client@cmd ie tablename@dblink name) but it didn't work;
thanks in advance
uday

My first preference wouldn't be to use a DB link as opposed to some APIs on the target database that I can call from the form.
Reason being that there are some things that may best not controlled over a DB link.
However if you have a really simple case and really have to use this method then in theory you could try creating a synonym pointing to the remote DB object and hopefully Apex should treat it the same as a local object.
Warning, I've never tried it :-).

How to call interactive form using webdynpro abap.

Hi Sap Guru's,
I have Created Invoice Interactive form using SFP Transaction , now my requirement is ,
Need to Call that invoice form using webdynpro abap by passing invoice number(vbeln) from the screen.
please suggest .
thanks

Hi Suresh,
Refer <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/aa/940ee5331b4b8fa0a6cb6714dc5db4/frameset.htm">Interactive Forms in WDA.</a>, this is the best one .
Welcome to <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/interactiveforms">Interactive Forms.</a>.
Do post your queries on Interactive Forms in SAP Interactive Forms by Adobe.
Rgds,
- anto.

How to integrate adobe forms using webdynpro-abap

Hi All,
How to integarte adobe forms with webdynpro -abap(se80).
Thanks & Regards
Suman

Hi suman,
First you have insert a element interactive form in the view.
In the properties of the interactive form you have properties called datasource and pdfsource.
You have to give the data which you want to display in the datasource throught binding.
These data you have to get it from the context. For pdfsource it should be xstring.
There is one more property called templatesource, when you give a name and double click. It automatically goes to SFP and you can create the form of your purpose. While creating it will ask for context. That context will be the same which you have declared in the view or component controller.
Regards,
Arun.

How to make a form using a wizard when the table has no primary key ?

Hi,
I want to make a form to update, delete a table. The table has no primary key. The problem is that the Wizard ask for a primary key.
How to avoid using a primary key ? i mean I don't want to create a primary key if is is possible.
I would like to use the wizard; is it possible ?
Thank you for your kind answers.
Christian

I believe the key is choosing 'Interactive' as opposed to 'Classic' in the implementation and then you can choose 'Existing Trigger' for the primary key source and it should work to use an existing column as your proimary key.

How to call a form using personalization

Hi All,
We have a requirement in which we need to call a standard form from another standard form.
Can we achive this using form personalization?
If yes, please guide us on how?
Thanks,

Aks your quetsion in an eBusiness-suite related forum, maybe here OA Framework

How to Call a form using forms personalization ?

Hi All,
We have a requirement where we need call a form when we tab out of a field from one form. How can we call a from using forms personalization ??
Can anyone state the steps or point to any metalink note.
Regards

Hi,
Please check whether following link help you:
http://oracleapps88.blogspot.com/2011/06/calling-another-form-parameters.html
Regards,

How is submit a form using ahref in a JSP

I have a form inside a iframe. It has 2 buttons. On clicking one button resultant page should open in the parent window(i.e target = parent). On clicking another button resultant page should open in same window (i.e target = self).
In bith case i need to submit the details in that form. I need to do this when java script is disabled. When java script is enabled changing of target window is possible.

I have written a few applications that required this kind of function, and what I ended up with was an applet.
First, I submit to the usual ACTION-URL and after processing the data, my code would determine whether the response should capture the full screen, or appear just withing the frame.
For redirects that capture the full browser window, I would call a page (still within the frame) that would run a Java applet whose only funtion is to send the browser to the new URL, which would be sent to the applet as a param. The applet just needs to know how to send the user to the new URL.
package com.redeye.core.utils;
import java.applet.Applet;
import java.net.MalformedURLException;
import java.net.URL;
* Redirect the user agent to a new URL.
* Usage:
* <xmp>
* <applet
*   code="package.to.Deflector"
*   codebase="path/to/applet/codebase"
*   name="Deflector"
*   height="1" width="1"
*   mayscript>
*     <param
*       name="targeturl"
*       value="http://target.url.here/">
*     <param
*       name="targetframe"
*       value="_self|_top|ANYTHING_ELSE">
* </applet>
* </xmp>
* Parameters:
* <b>targeturl:</b> The target to which the user agent is redirected
* <b>targetframe:</b> name of the frame/window to be redirected
* @author http://redeye.no
public class Deflector extends Applet
     private static final long serialVersionUID = -878236489812416561L;
      * Constructs a new Deflector applet
     public Deflector()
          // Default contructor
      * Initializes the Deflector applet
     public void init()
          super.init();
          try
               String url = getParameter("targeturl");
               String target = (getParameter("targetframe") != null) ? getParameter("targetframe") : "_top";
               if (null != url)
                    getAppletContext().showDocument(new URL(url), target);
          catch (MalformedURLException mue)
               System.out.println("Error in target URL: " + mue.getMessage());
}

How to create Test Form using TEMPLATE.fmb in APPS

Hi,
I need to create a Test Form (Extend oracle Forms) and deploy it in custom ASO_TOP.
When I opened TEMPLATE.fmb(AU_TOP) i received following error.
FRM-18108 Failed to load the following objects.
Source Module:APPSTAND
Source Object:Standard_PC_AND_VA
Source Module:APPSTAND
Source Object:Standard_Toolbar
Source Module:APPSTAND
Source Object:Standard_Calendar
How can I resolve this error and proceed forward.
Thanks,
Mithun

It means that the Test form has a reference to those objects and it can't find them. You need to make those files (forms and/or libraries) available to Forms Builder.

How to Create Dynamic form using table data

Dear All,
I have one Table called PRODUCT_MASTER where product details are stored. Say product A,B,C,D are stored in the table. Another table called SUB_PRODUCT_MASTER, which contains sub product details.Say A1,A1,B1,B2, B3,C1, C2, C3, D1,D2,D3.
Now, I want to create a dynamic form based on product,sub product. for a whole month. For better under standing here is the format.
PRODUCT A B C D
SUB_PROD A1 A2 B1 B2 B3 C1 C2 C3 D1 D2 D3
Days
1 x x x x x x x x
2
3
4
5
6
7
Now whenever I add one row in the PRODUCT)MASTER table and SUB_PRODUCT_MASTER table, Form should add one column in the form automatically. e.g. If I add Product E with two Sub product E1 and E2 then form should add ptoduct E column in the form with sub products E1 and E2 as per above format. Here days are fixed to 31. This forms should accept product wise daily despatch entry. For
storing despatch entry another table is created.
Please help to create this type od forms.

You want I believe to create Croos-Table(Matrix) form. Visit Cross-table (matrix) forms layout and add "Please Send me too".

How to fill out form using adobe?

I downloaded adobe to fil out the form but i cant still open it.

You either need to purchase Adobe Acrobat Pro, or go to a place such as http://www.pdfescape.com/ to fill out the form. There is an edit functionality in Preview application, but that doesn't always fill out all types of forms.

How to commit a form using ctl S

Similar Messages

Maybe you are looking for