How to communicate USB printer to print in LPR protocol from on Windows 7

I am trying to get my colour laser printer HP CP1215 to work as a network printer for PC's running Windows 7. At the moment, the printer is connected to the USB port of my Airport Extreme (802.11n) Base Station. It worked perfectly on PC's running Windows XP, but when I tried print stuff from Windows 7 ... Problem starts.
First, the printer didn't know when to stop, so it just keeps on printing until I manually stop the job. I have searched in the internet and saw some people fixing this problem by changing the print protocol setting from RAW to LPR. However, it didn't work for me.
I changed to the setting to LPR and when I tried to print a small document, the print job spools but doesn't start. It seems the USB printer is not communicating. I tried telnet. Port 9100 seems working fine. But port 515 (which is the port for LPD) didn't respond. It seems Airport Extreme has disabled port 515.
Does any know how fix this?

Hello,
maybe this will work even from a distance. You should have a look at Adobe's database, to see what's stored/saved about your accounts.
Here you will find general infos about your Adobe Account >>> https://www.adobe.com/account.html
and there you will find your serial number >>> http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Please give it a try, good luck!
Hans-Günter

Similar Messages

EA6300 - Windows TCP/IP Printing Using LPR Protocol to USB ??

I am in process of replacing an old Zyxel router with (probably) an EA6300 (depending on the answer to this post...)
Currently I have a Dymo USB label printer connected to the Zyxel's USB port, and my Windows 7 clients are set up to print to that device using the LPR protocol through a Windows TCP/IP print port connected to 192.168.1.1 (the IP address of the Zyxel).
So my question is whether the EA6300 will work in the same way?

Hi Andrew! Yes the VUSB software must be installed on your Windows 7 computer for it to be able to see the printer that will be connected to the USB port of the EA6300 and be able to print . Here's more information about the EA6300, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=7e5454f239a946599bd151dccb031a57_Getting_to_know_t...

How to comand de print job to initiate from diferent positions?

Hy folks,
I have a problem about how to print labels, more specifically how to comand the print job to initiate from diferent positions of the continuous forms paper.
See what I meen:
I have a label continuous forms paper with 2 colunns x 3 lines, six positions, to print from de right to the left and them downward, ok?!
I need to know a way to start the print from the 1st, 2nd, 3rd, 4th, 5th or 6th (or even from 2nd ou 3rd line). Only by this way, the print would respect the layout and the line break between pages. The manual set of this positon at the printer is not acceptable to my client.
See, I'm just starting to use Crystal and its tools, so I don´t know even it is possible to do, but I've heard that is possible!
Can you help me with this issue?
Thaks for the attention
Denis

Define a custom Paper size

How to access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

How can I access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

...Called it a roaming network. Wireless mode is create a wireless network. I have checked allow this network to be extended. Probably need to uncheck that?
Yes, that option should be deselected as it only pertains to when both routers are interconnected by wireless. Since you have a roaming network, they of course, would be interconnected by Ethernet.
The other important settings for a roaming network are:
Each router must have a unique station name. For the AirPort, this would be called its Base Station Name. I believe the default station name for Linksys routers is: linksys
Each router must broadcast a wireless network with an identical Network Name. For the Linksys, Network Name is the same as its SSID.
Each router wireless network must use the same Wireless Security type and password. The Linksys WRT-54G is capable of up to WPA2 Personal. If you have it set to this level of security, the AirPort should be at the same setting.
Make sure that each router is not on the same Radio Channel for the 2.4 GHz radio. In the US, there are basically only three non-overlapping channels: 1, 6, or 11. Set each so that they don't use the same channel but use of those three choices.

I paid to be able to print an Adode article from my Windows vista and it didnt work. Why?

I paid to be able the print an adobe article from my windows vista. It did not work Why?

Equipper Adobe software or service are you trying to print from?

How to delete the items in the recycle bin permanently from the windows using Diruse command

How to delete the items in the recycle bin permanently from the windows using Diruse command.
Because most of the time we get out of disk space issues.
Can somebody help me in giving with an example

You can right-click Recycle Bin|Properties and choose radio button for
Don't move files ....
This one may also help.
http://technet.microsoft.com/en-us/library/cc784980(v=ws.10).aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How to remove old USB printer drivers and ports from Windows XP and Windows 7

We have several instances of HP 4250 Printers connected as local USB printers. When trying to replace this model with a HP P4015n or HP 600 M602n the new models will appear to install but won't print. No error messages but sometimes they try to install with ieee 1284.4 support which would seem to be a parallel port type. We're trying to use the HP UPD PCL 5. I'm looking for a way to completely remove the old printer instances, drivers and ports. While the printer icons and drivers seem to be able to be deleted the USB printer ports can't be deleted. Then when I go back and try to install the new model printer it can only use he existing USB port. Again, when that happens the new printer won't print. So I'm trying to get a completely fresh start with the XP SP 3 and Win 7 OS before installing the newer models. I've tried several methods to clean the USB printers but the instructions are never detailed and most times something is missing and the OS needs to be reloaded. I thought that I would see if someone who knows HP USB printers has any ideas...

These seem to be a commercial products. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How to connect a printer to Airport in WIFI with Windows

Hi,
I just would like to know how to connect my printer (Samsung) to my Airport network through WIFI (My computer is working with Windows).
Thanks

Well the easiest would be to plug your printer directly into your extreme using either the USB or Ethernet connection.
Make sure you then install bonjour and use the printer wizard to convert your printer...
Bonjour Print Services for Windows v2.0.2
http://support.apple.com/kb/DL999

How do i clean print heads for 990 c on windows 7

How do i clean print heads for DekJet 990 cxi on windows 7

Hey @remo1957 ,
Thanks a lot for the question, now lets get you an answer!
I see you are looking for instructions for how to clean your printers printheads. Unfortunately you are unable to use an automated tool to clean your printheads.
I have linked a document that goes through how to clean and maintain your printer.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpd06920&tmp_task=useCategory&cc=us&dlc=en&lc=en...
Best of luck and I hope this get you what you are looking for!
I worked for HP.

MX 925 - how to force the printer to use paper from lower tray

Hi' there,
Several people seems to have the problem, that the printer "wants" to print from the upper tray, - I assume it's because it want's photo paper. Is it possible to FORCE the printer to use paper from the lower tray, when e.g. you have no photo paper, receive the error message, and just want to see the print?
:-) Sogge

I found a methoid that while clumsy, works. I have defined another printer on my windows machine that points to the same
printer as my original printer defination. I have named this printer "Legal" and has defined legal paper as it's default. When
I print to this printer( DECTYPE, DECNAME) it now defaults to legal.

My HP wireless printer keeps getting deleted from my windows 7 PC. Why?

I have a HP Photosmart D110A e-printer and every once and awhile it get deleted from my Windows 7 PC and I have to add it again, What is going on with this. Any tips would be great.

It should.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How can I use my time capsule to save files from my windows PC (Windows 8.1)?

I have been to see the iStore close to where I live but I am frustrated to say that they are no help what so ever. The technical desk there freely admits that they do not how to do it and all they say is "apparently it is easy. Just follow the instructions on screen" which helps me no end!
I have the Time Capsule set up on my mac and want to use part of the disc to save my files from my Windows PC (running Windows 8.1) that is on the same home network.
I have found the apple forums so helpful in the past that I am pinning on my hopes on anyone that can help me via the forum now!

Load the airport utility for windows. Sadly the most recent one is old.
http://support.apple.com/kb/dl1547
Although it is for windows 7 it does work on 8 and 8.1 .. tell us if you have problems loading it. Some people find it won't work without using safe mode.
The utility will not help a lot to setup the latest model TC.. it is fine for Gen4 and earlier. But it does load bonjour for windows and a disk access agent.
The TC should run simple names.. Short.. keep them below 10 characters if you can. No spaces and pure alphanumeric.
That includes the base station name and wireless name.
Once all of that is correct, open windows explorer and type in the address bar.
\\TCname or \\TCipaddress where you replace TCname with the new short name or TCipaddress with obviously its actual IP.
You will then get a request for username and password. Username is whatever.. admin will do. Password type in your disk access password.. public by default.
TC is not designed to allow partitions so you cannot partition the TC disk. Create a folder and simply copy and paste your files to the folder.
NOTE:: The TC cannot back itself up. So make sure you do not move files to the TC without having another copy.
NOTE:: The TC does not happily mix TM backups and data.
See http://pondini.org/TM/Home.html For info about TM and the TC.
This area in particular.
Q3 http://pondini.org/TM/Time_Capsule.html
On mixing data and backups.

How to handle "/9.2.0/root.sh as root from another window" in silent instal

Hi,
I was successful to start a silent installation of Oracle9iR2 using a responsefile on my System RHEL 3. But the installation ends soon and a wrong successful install message:
Error :*** Alert: A configuration script needs to be run as root before installation can proceed. Please leave this window up, go run /opt/app/oracle/product/9.2.0/root.sh as root from another window, then come back here and click OK to continue. ***
The installation of Oracle9i Database was successful.
I use -ignorePatchConflicts for ignoring the patch conflicts. But How do I handle these issues. Where I have to run root.sh ... etc in teh Non Interactive Install.
I am scripting solution for non interactive install and manual intervention to run these root.sh shell scripts at different points of install is not a good idea as it wont help me automate the install.
Please let me know if anyone has solved this problem with -silent install.
Thanks in advance.
Senthil

Thats me (OP) again:
I tried setting:
SHOW_ROOTSH_CONFIRMATION=false in the response file. But still no help. The installation exits at run root.sh prompt point. How I can effectively deal with it in a script?

How do i get the Ok prompt on Sun E250 from a windows keyboard

I have tried the F5 and ctrl+alt+pause options to get the ok prompt without any success and at what point do I invoke the stop? What key combination from a windows key board would achieve the STOP effect like a sun keyboard.
I would like to solve this problem /var/adm/utmpx not owned by root or not mode 644 error?, how do i solve it ? Help me out guys. Am very much a newbie with all this.
NB am working from a hyperterminal seession.

I assume you mean that you are using a serial line console. If this is set up in the default way, then sending an RS-232 BREAK sequence should drop you to the boot prompt. I've no idea how to do this from Hyperterminal, but there should be an option to do it in one of the menus somewhere. Alternatively, physically disconnecting then reconnecting the serial line is often interpreted as a BREAK.

How to add USB printer to airport extreme

How to setup with utility

You do not use the AirPort Utility to set up a printer if that is what you mean.
You will need a Mac or a PC to setup the printer.
Post back to let us know what you have and what operating system is being used. Also we need to know if your are asking if it is possible to print from your iPad or iPhone. It may or may not be.
Keep in mind that not all printers are compatible with the AirPort Express, so this will be one of those times when you will not know if something will work until you try it.
Also keep in mind that if you have an All-in-One device, only the print function will be supported when the device is connected to the AirPort Extreme. If you need copy, scan, maintenance, etc.....probably best to leave the device connected directly to your computer.

How to communicate USB printer to print in LPR protocol from on Windows 7

Similar Messages

Maybe you are looking for