How to compare the same array?
Hello,
The question not how to compare arrays.
I have a method that gives results of an array type int.
for(......){
int [] arrayFunc(int [] input)
return arrayOut;
}I want to compare those arrayOut arrays. I need to find a way to save the first output and then compare it with the newest output. Where do I have to put the temp array to temporary save the array? What should happen if I want to keep track of the results and get comparisons of first, second, third output?
Thanks
Still not 100% sure but I try and help. What you need to do is have two references. After you have generated a result compare it to the last result. After the comparison you need to assign the current result to the last result and then go around the loop again to generate a new current result. Below is some code that uses plain ints but I hope it illustrates what I am trying to explain.
import java.util.Scanner;
class ComparingNumbers {
public static void main(String[] args) {
Scanner scanner = new Scanner(System.in);
int current;
System.out.print("Number: ");
int last = scanner.nextInt();
scanner.nextLine();
for(int index = 0; index < 10; index++) {
System.out.print("Number: ");
current = scanner.nextInt();
scanner.nextLine();
System.out.println("Difference is " + Math.abs(current - last));
last = current;
}
Similar Messages
-
How can I, depending on the elemnts of an array, write into the same array
Hi everyone, to make this a little clearer, consider a 2*2 I8 array, many y objective is the following:
1) connect the array to the case structure, and depending on a specific case that's value of element of indeces (0,0), write over the same array in this way
1 0
2 3
for example, note that in (0,0) there's 1, so my decision is to make the array (same array) as:
0 0
2 3
any ideas?
Thanks.
T. A.toniaz wrote:
... should I add the array itself inside the loop or should I add its local variable?
The array data is in the shift register or wire!
Any controls or indicators of the array just lets you interface to it via the front panel. Don't use controls or indicators as data storage via local variables, that's not the right way.
Here's a very simple demo (LV 8.0) that shows one possibility how to do this. See if it makes sense.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
changeArrayElement.vi 18 KB -
How can I keep all the previous datas in the same array?
I have a problem with keeping the previous datas in my array. The problem is when the iteration loop is executed, I have one or two value(s) stored in the array. The second iteration I have either one or two values (depending on the condition) coming out, but it overwrites my previous value. I want to keep all my data in the same array as the loop is executed.PS. I have attached a simple vi along this message. If anyone can help me out with this, I really appreciate for the help.
Regards,
SonnyIf you iterate several times (N > 100) then I would suggest using the Initialize Array outside of the For Loop and then use the Replace Array Subset inside the Loop to populate the array. The reason for this is because the Build Array utility has to locate a new space in memory for the newly concatenated array -- the Replace Array Element utility uses the same memory space.
If you iterate just a few times with a small array then using the Build Array should be okay.
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect -
How to Identify the Same Characters in 2 Different Strings
Hi All,
I am requiring a suggestion on how to identify the same characters in 2 different Strings, for example:
String str1 = "hello";
String str2 = "llheo";
Both Strings contain the same characters, but in a different order, so what would be the best technique to verify t that both Strings indeed contain the same characters?
I was personally thinking along the lines of using the class, java.util.regex.Pattern?
Any thoughts would me much appreciated. ThanksI would instead sort the characters, and then compare
the sorted data.
I'm fealing generous
private static boolean anagram(String left, String right)
if (left.length() != right.length())
return false;
char[] leftChars = left.toCharArray();
char[] rightChars = right.toCharArray();
Arrays.sort(leftChars);
Arrays.sort(rightChars);
return Arrays.equals(leftChars, rightChars);
} -
"Data only" csv export. How to get the same data?
When I export to csv I get more data than when exporting to "data only". Why and how to get the same as when using "data only". I suppose it is because of some supressed lines, but why there is difference in the view (which is right) and in the export file?
I do not want to export to xls with "data only" and save as csv, because the exported csv is being read by another application, which is unable to convert it automatically.
The other way is to put constraints in the data selection for the whole report (and not by supressing lines). How to say {table.date}>=maximum({table.date}) in the in the data selection? There is not possible to use "maximum". Probably possible with array?
Thanks in advance
Edited by: Kiril Bojilov on Aug 4, 2009 12:34 PM
Ok, I managed it: I put the constraint in the group selection
Edited by: Kiril Bojilov on Aug 4, 2009 12:46 PMNew customers get more options because new customers didn't already agree to complete a 2yr contract before being able to get a new phone. If you had a line that wasn't under contract, you would get a better deal than new customers because while they pay $35 activation fee for a new line, you pay $30 upgrade fee for using an upgrade. You just have to finish your end of the deal before you can start a new one.
-
How to compare the version history values
Hi Everone,
I've an requirement to compare the column values between present version and previous version of the document in the document library.
Versioning is enabled in the doc., lib... Please suggest how to achieve the same without opening the version of the file manually.
Thanks in advance!
Thanks
Arun
Arun PrakashHi Rodrigo,
Thanks for your response!
we don't have any access to server to execute the code or to run the power shell. So please suggest to do same with client side to achieve this requirement.
Thanks again!
Arun Prakash -
How to use the same POWL query for multiple users
Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
SandhyaBatch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..
-
How to register the same schema with same URL
I'm getting ORA-31085 error when try to register the same schema with same URl.
My requirement is that I should be able to reregister the same schema with the same URL .
I'm using the following function :
PROCEDURE validateXmlSchema(inp_xmlMsg IN VARCHAR2,
out_isValidDoc IN OUT NUMBER,
inp_xmlSchema IN OUT VARCHAR2,
out_varchar_notused OUT VARCHAR2)IS
xmldoc XMLType;
res number;
BEGIN
xmldoc := XMLtype(inp_xmlMsg);
res := xmldoc.isSchemaValid(inp_xmlSchema);
IF (xmldoc.isSchemaValid = 1) THEN
out_isValidDoc := 1;
ELSE
out_isValidDoc := 0;
END IF;
END validateXmlSchema;
This is used recursively.Until the schema is not validated for a given URL this function should keep on throwing error and once the schema is validated the data should be inserted in the DB.
But its not happening as of now instead the ORA-31085 is thrown second time.
Plz provide pointers to solve the issue."mjs" <[email protected]> wrote in message
news:g7kjk5$o6$[email protected]..
> "mjs" <[email protected]> wrote in message
> news:g7gl2g$i3d$[email protected]..
>> "Zorrrro" <[email protected]> wrote
in message
>> news:g7gcjv$a6n$[email protected]..
>>> I'm completely nuckered trying to find an answer
for this...
>>>
>>> Does anyone know how to keep the same width an
position of the submenus
>>> of a
>>> horizontal dropdown menu?
>>> Thank you in advance.
>>>
>>> Cheers.
>>
>> Doesn't a simple style="width:200px" in the input
tag work?
>
> I'll asume the answer is "yes", then. ;) You're welcome.
I believe the OP is talking about a dropdown menu like this
one
http://www.tjkdesign.com/articles/keyboard_friendly_dropdown_menu/default.asp
not about a "select menu".
I could be wrong though...
Thierry
Articles and Tutorials:
http://www.TJKDesign.com/go/?0
http://developer.yahoo.com/
helps you build applications and mashups -
How to Use the same iview for both KM End User and the KM Administrator
Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan. -
How to use the same OC4j server with different port number
How to use the same OC4j server with different port numbers..?
I have to OC4J installed on my machine on different hard disk drives....
I want to be able to run both the server simultaneously..?
is it possible ..it yes then how..?
for that i have changed the port number of one server...
but when i am trying to start the other server with different port number..it says that JVM -Bind already...
Is there any clues...?
Nilesh GIn the config directory:
default-web-site.xml: Change the port the HTTP listener listens on
jms.xml: Change the port the JMS service listens on
rmi.xml: Change the port the ORMI listener listens on.
Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
Rob
Oracle -
How to use the same services-config for the local and remote servers.
My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
<services>
<service id="amfphp-flashremoting-service"
class="flex.messaging.services.RemotingService"
messageTypes="flex.messaging.messages.RemotingMessage">
<destination id="amfphp">
<channels>
<channel ref="my-amfphp"/>
</channels>
<properties>
<source>*</source>
</properties>
</destination>
</service>
</services>
<channels>
<channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
<endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
</channel-definition>
</channels>
</services-config>
I think the problem is the line
<endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime . -
How to use the same email address for outgoing email on two iPads?
How to use the same email address for outgoing email on two iPads?. My wife and I both use the same email address. We receive the same incoming email on both iPads but are unable to send email from my wife's iPad. She is using an iPad 2 and is usng IOS 6.0.1
Hi Creaturekeeper,
If you've added the account into the iPad and you are unable to send email from it, then please follow the troubleshooting in the article below.
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Take care,
Alex H. -
How to share the same Database Connection when using several Task Flows ?
Hi All,
I’m using JDev 11.1.1.3.0.
I’m developing ADF Fusion Applications (ABC BC, ADF Faces…)
These applications are deployed on a Weblogic server.
Each application has only one Application Module.
All Application Modules have the same connection type defined: JDBC DataSource : jdbc/GCCDS
It is working fine.
I’ve also developed Task Flow Applications for small thinks that are reused in multiple main applications.
Each Task Flow Application has also one Application Module with the same connections type as main applications.
All these task flows are deployed to JAR file (ADF Library JAR File) and are reused on my main applications. (drag and drop from the Resource Palette to ADF Regions….).
There are some parameters passed to Task Flows, so that they can filter data depending on which main applications they are called from.
Everything is working perfectly.
All my main applications are using more and more task flows. Which is nice for the reusability etc…?
Only ONE PROBLEM: DATABASE CONNECTIONS.
Every Task Flows service made a database connection. So one user may have 10 database connections for the same adf page. And when there are 100 users that are working at the same time, it becomes a problem.
How to share the same database connections for the main applications and all task flows which are used in the main application?
Best Regards
NicolasHi John,
When I open a ADF Library JAR file of one of my task flow. (gcc_tf_recentSites.jar)
I can see TF_RecentSitesService.xml and TF_RecentSitesServiceImpl.class in gcc_tf_recentSites.jar\mu\gcc\tf\recentSites\model\service folder
+ bc4j.xcfg in gcc_tf_recentSites.jar\mu\gcc\tf\recentSites\model\service\common folder.
bc4j.xcfg details are
+<?xml version = '1.0' encoding = 'UTF-8'?>+
+<BC4JConfig version="11.1" xmlns="http://xmlns.oracle.com/bc4j/configuration">+
+<AppModuleConfigBag ApplicationName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService">+
+<AppModuleConfig DeployPlatform="LOCAL" jbo.project="mu.gcc.tf.recentSites.model.TF_RecentSites_Model" name="TF_RecentSitesServiceLocal" ApplicationName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService">+
+<Security AppModuleJndiName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService"/>+
+<Custom JDBCDataSource="jdbc/GCCDS"/>+
+</AppModuleConfig>+
+<AppModuleConfig name="TF_RecentSitesServiceShared" ApplicationName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService" DeployPlatform="LOCAL" JDBCName="gccdev" jbo.project="mu.gcc.tf.recentSites.model.TF_RecentSites_Model">+
+<AM-Pooling jbo.ampool.maxpoolsize="1" jbo.ampool.isuseexclusive="false"/>+
+<Security AppModuleJndiName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService"/>+
+</AppModuleConfig>+
+</AppModuleConfigBag>+
+</BC4JConfig>+
So, it seems that the Application Module is packaged with the task flow....
Is it normal ?
Regards
Nicolas -
How to share the same coherence cache in two EPN
hi,all:
I need to share the same coherence cache in two EPN. to put data into this coherence cache.
only whe EPN can been deploy ok, the other EPN deploy will get below exception.
Caused By: java.lang.IllegalStateException: Service "synergy-scheme-service" has been started by the factory with a different configuration descriptor
at com.tangosol.net.DefaultConfigurableCacheFactory.validateBackingMapManager(DefaultConfigurableCacheFactory.java:1246)
who can tell me why? or who can give me a example on how to share the same coherence cache in two EPN.
thanks a lotsHi,
This is because the system detects that you are using different configuration for the cache of the same name(and the domain name). If you want, we can discuss it, my mail is [email protected]
Thanks
Junger -
How to share the same session between JNLP Application and browser session
How to share the same session between JNLP Application and browser session using BasicService.showDocument(url) method? It appears whenever i launch any URL from within a JNLP application using BasicService.showDocument(url) , it creates new instance of browser and session even after i used cooke handlers to restore JSESSIONID and Ltpa token etc.
public static int showDocument(String urlToOpen)
BasicService obj = (BasicService) ServiceManager.lookup("javax.jnlp.BasicService");
obj.showDocument(urlToOpen);
}Try using Reflection
Maybe you are looking for
-
Unable to view music on iphone
So I am new to this whole iPhone thing. I am trying to get music onto my iPhone and although I can see it when I click on the iPhone within my itunes (on the left under the phone section) on the computer it is not showing up on the phone itself. How
-
O/S X 10.5 leopards and Adobe CS2
Hello, References : Go To : Adobe.com/ Upgrading to Leopard? Find out Adobe software compatibility Page 3 I have a new Mac Pro came with Tiger installed and a Leopard disk, and a G4 powerBook. About using CS2 Illustrator and or Photoshop with Leopard
-
Question about JDBC in BlazeDS?
stupid question: is their a JDBC driver already installed with BlazeDS? I am currently installing BlazeDS in tomcat. Do i need to install the connector j separately, or does this come with BlazeDS? thanks
-
Problems with IIS proxy to cluster
We are using WebLogic 6.1 with two managed servers in a cluster. Our IIS server is running IIS 4 and is set up to proxy to the cluster by IP addresses. When one server goes down(as in a hardware failure or shut down), th
-
RoboHelp 10 trial version installation gets to 65% and stops
I have been trying to install Robohelp 10 trial version on my Win7 Dell Laptop for about 4 hours now and it always stops at about the 65% complete mark (Currently Installing AdobeHelp). I have tried at least 4 times and it stops in the same place ev