How to compare two stored procedure

I have two oracle database and each database have stored procedure
How to compare two stored procedure?
What is the command to compare the stored procedure?

select line, text
from user_source
where name='....'
minus
select line, text
from user_source
where name='....'
should do nicely.
Or: get the procedure text to a file using dbms_metadata.get_ddl (9i and higher) and run diff (Unix) or fc (Windhoze) on it.
You are a bit scarce on details.
Better still: implement source control.
Sybrand Bakker
Senior Oracle D.B.A.

Similar Messages

How to execute two stored procedures in a mapping?

Hi All,
I have a mapping with a source and a target table. In the same mapping, I have a stored procedure attached to a post mapping. during this execution of mapping the post mapping process works fine. Now I want to add one more stored procedure and attach to one more post mapping process. currently it is not allowing, is there any work around to implement this plan. pls post your suggestions.
Thanks in Advance,
Kishan

Hello Kishan,
The only way to archieve this currently is to create a super-procedure that calls all your stored procedures in sequence, and use the super-procedure with the post mapping operator.
Regards, Hans Henrik

How to compare two rows in PL/SQL?

Hi All,
How to compare two rows in PL/SQL? Is there any method that I can use instead of comparing them column by column?
Any feedback would be highly appreciated.

PhoenixBai wrote:
Hi All,
How to compare two rows in PL/SQL? Is there any method that I can use instead of comparing them column by column?What "rows" are you referring to?
If you're talking of rows within a PL/SQL associative array there are techniques as described in the documentation... e.g.
SQL> ed
Wrote file afiedt.buf
1 declare
2    type v1 is table of number;
3    r1 v1 := v1(1,2,4);
4    r2 v1 := v1(1,2,3);
5 begin
6    if r1 MULTISET EXCEPT DISTINCT r2 = v1() then
7      dbms_output.put_line('Same');
8    else
9      dbms_output.put_line('Different');
10    end if;
11* end;
SQL> /
Different
PL/SQL procedure successfully completed.
SQL> ed
Wrote file afiedt.buf
1 declare
2    type v1 is table of number;
3    r1 v1 := v1(1,2,3);
4    r2 v1 := v1(1,2,3);
5 begin
6    if r1 MULTISET EXCEPT DISTINCT r2 = v1() then
7      dbms_output.put_line('Same');
8    else
9      dbms_output.put_line('Different');
10    end if;
11* end;
SQL> /
Same
PL/SQL procedure successfully completed.
SQL>If you're talking about rows on a table then you can use the MINUS set operator to find the rows that differ between two sets of data...
SQL> select * from emp;
     EMPNO ENAME      JOB              MGR HIREDATE                    SAL       COMM     DEPTNO
      7369 SMITH      CLERK           7902 17-DEC-1980 00:00:00        800                    20
      7499 ALLEN      SALESMAN        7698 20-FEB-1981 00:00:00       1600        300         30
      7521 WARD       SALESMAN        7698 22-FEB-1981 00:00:00       1250        500         30
      7566 JONES      MANAGER         7839 02-APR-1981 00:00:00       2975                    20
      7654 MARTIN     SALESMAN        7698 28-SEP-1981 00:00:00       1250       1400         30
      7698 BLAKE      MANAGER         7839 01-MAY-1981 00:00:00       2850                    30
      7782 CLARK      MANAGER         7839 09-JUN-1981 00:00:00       2450                    10
      7788 SCOTT      ANALYST         7566 19-APR-1987 00:00:00       3000                    20
      7839 KING       PRESIDENT            17-NOV-1981 00:00:00       5000                    10
      7844 TURNER     SALESMAN        7698 08-SEP-1981 00:00:00       1500          0         30
      7876 ADAMS      CLERK           7788 23-MAY-1987 00:00:00       1100                    20
      7900 JAMES      CLERK           7698 03-DEC-1981 00:00:00        950                    30
      7902 FORD       ANALYST         7566 03-DEC-1981 00:00:00       3000                    20
      7934 MILLER     CLERK           7782 23-JAN-1982 00:00:00       1300                    10
14 rows selected.
SQL> select * from emp2;
     EMPNO ENAME      JOB              MGR HIREDATE                    SAL       COMM     DEPTNO
      7521 WARD       SALESMAN        7698 22-FEB-1981 00:00:00       1250        500         30
      7566 JONES      MANAGER         7839 02-APR-1981 00:00:00       2975                    20
      7782 CLARK      MANAGER         7839 09-JUN-1981 00:00:00       2450                    10
      7788 SCOTT      ANALYST         7566 19-APR-1987 00:00:00       3000                    20
      7839 KING       PRESIDENT            17-NOV-1981 00:00:00       5000                    10
      7900 JAMES      CLERK           7698 03-DEC-1981 00:00:00        950                    30
      7934 MILLER     CLERK           7782 23-JAN-1982 00:00:00       1300                    10
7 rows selected.
SQL> select * from emp
2 minus
3 select * from emp2;
     EMPNO ENAME      JOB              MGR HIREDATE                    SAL       COMM     DEPTNO
      7369 SMITH      CLERK           7902 17-DEC-1980 00:00:00        800                    20
      7499 ALLEN      SALESMAN        7698 20-FEB-1981 00:00:00       1600        300         30
      7654 MARTIN     SALESMAN        7698 28-SEP-1981 00:00:00       1250       1400         30
      7698 BLAKE      MANAGER         7839 01-MAY-1981 00:00:00       2850                    30
      7844 TURNER     SALESMAN        7698 08-SEP-1981 00:00:00       1500          0         30
      7876 ADAMS      CLERK           7788 23-MAY-1987 00:00:00       1100                    20
      7902 FORD       ANALYST         7566 03-DEC-1981 00:00:00       3000                    20
7 rows selected.If you actually need to know what columns data is different on "non-matching" rows (based on your primary key) then you'll have to compare column by column.

How to compare two PDF files through PLSQL

Hi,
Can any body help that how to compare two PDF files through PLSQL programing and gives the differences as output.
Thanks,

Or simply apply an oracle text index on your pdf column:
SQL> create table t (id integer primary key, bl blob)
Table created.
SQL> declare
bf bfile := bfilename('TEMP','b32001.pdf');
bl blob;
begin
dbms_lob.createtemporary(bl,true);
dbms_lob.open(bf,dbms_lob.lob_readonly);
DBMS_LOB.LOADFROMFILE(bl, bf,dbms_lob.getlength(bf));
insert into t values (1,bl);
commit;
dbms_lob.close(bf);
dbms_lob.freetemporary(bl);
end;
PL/SQL procedure successfully completed.
SQL> create index t_idx on t (bl) indextype is ctxsys.context parameters ('filter ctxsys.auto_filter')
Index created.
SQL> declare
   mklob   clob;
begin
   ctx_doc.filter ('t_idx', '1', mklob, true);
   dbms_output.put_line (substr (mklob, 1, 250));
   dbms_lob.freetemporary (mklob);
end;
Oracle® Database
Release Notes
11
g
Release 1 (11.1) for Linux
B32001-04
November 2007
This document contains important information that was not included in the
platform-specific or product-specific documentation
PL/SQL procedure successfully completed.This generates a text only version of your pdf and standard text comparison methods can be applied ....

How to use a stored procedure as a datasource in Crystal Report for Eclipse

Hi All,
I've written a stored procedure in oracle 10g with few input parameters and one refcursor output parameter. I want to use this stored procedure as a data source for creating a report in "Crystal Report For Eclipse 3.6.0".
When I tried to add this stored procedure to the report using the connection explorer, I don't see any option to do this. But when I try to add any table, it shows options like "Add to the current report"....
Can anybody assist me how to use a stored procedure as a data source in "Crystal Report For Eclipse"?
Which driver should I use to connect to the oracle database? I tried using JDBC Driver for Oracle.
Thanks in advance.

Did you solve your problem? How did you do?

How can I execute Stored Procedures in PARALLEL and DYNAMICALLY ?

Hi
I have a stored procedure. It can be executed like this
exec test @p = 1;
exec test @p = 2
exec test @p = n;
n can be hundred.
I want the sp being executed in parallel, not sequence. It means the 3 examples above can be run at the same time.
If I know the number in advance, say 3, I can create 3 different Execution SQL Tasks. They can be run in parallel.
However, the n is not static. It is coming from a table.
How can I execute Stored Procedures in PARALLEL and DYNAMICALLY ?
I think about using script task. In the script, I get the value of n, and the list of p, from the table, then running a loop with. In the loop, I create a threat and in the threat, I execute the sp like : exec test @p = p. So the exec test may
be run parallel. But I am not sure if it works.
Any idea is really appreciated.

Hi nam_man,
According to your description, you want to call stored procedures in parallel, right?
In SSIS, we can create separate jobs with different stored procedures, then set the same schedule to kick the jobs off at the same time. In this way, we should be careful to monitor blocking and deadlocking depending on what the jobs are doing.
We can also put all stored procedures in SSIS Sequence container, then they will be run in parallel.
For more information about SSIS job and Sequence container, please refer to the following documents:
http://www.mssqltips.com/sqlservertutorial/220/scheduling-ssis-packages-with-sql-server-agent/
https://msdn.microsoft.com/en-us/library/ms139855(v=sql.110).aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

How to call a stored procedure from WorkShop

Hello Everyone .. I'm quite new with WebLogic 8.1 & WorkShop, so please bare with
me .. Today I'm simply trying to find out how to call a stored procedure from
within workshop, using any of the DB Controls .. I see workshop provides a way
create a Java Control, Rowset Control, but it wont easily allow for a stored procedured
to be entered in place of the inline query .. Perhaps I've over looked it. Any
advise on the best way to tackle this task will be appreciated.
Atahualpa

Atahualpa--
Maybe this will help:
http://edocs.bea.com/workshop/docs81/doc/en/workshop/guide/controls/database/conStoredProcedures.html
Eddie
Atahualpa wrote:
Hello Everyone .. I'm quite new with WebLogic 8.1 & WorkShop, so please bare with
me .. Today I'm simply trying to find out how to call a stored procedure from
within workshop, using any of the DB Controls .. I see workshop provides a way
create a Java Control, Rowset Control, but it wont easily allow for a stored procedured
to be entered in place of the inline query .. Perhaps I've over looked it. Any
advise on the best way to tackle this task will be appreciated.
Atahualpa

How to use a stored procedure in oracle reports

How to use a stored procedure in oracle reports

Dear,
In report triggers you can write your procedure/functions or call it like
function AfterPForm return boolean is
begin
myprocedure(:mydate);
return (TRUE);
end;
Thanks
Jamil

How to create a stored procedure and use it in Crystal reports

Hi All,
Can anyone explain me how to create a stored procedure and use that stored procedure in Crystal reports. As I have few doubts in this process, It would be great if you can explain me with a small stored proc example.
Thanks in advance.

If you are using MSSQL SERVER then try creating a stored procedure like this
create proc Name
select * from Table
by executing this in sql query analyzer will create a stored procedure that returns all the data from Table
here is the syntax to create SP
Syntax
CREATE PROC [ EDURE ] procedure_name [ ; number ]
    [ { @parameter data_type }
        [ VARYING ] [ = default ] [ OUTPUT ]
    ] [ ,...n ]
[ WITH
    { RECOMPILE | ENCRYPTION | RECOMPILE , ENCRYPTION } ]
[ FOR REPLICATION ]
AS sql_statement [ ...n ]
Now Create new report and create new connection to your database and select stored procedure and add it to the report that shows all the columns and you can place the required fields in the report and refresh the report.
Regards,
Raghavendra
Edited by: Raghavendra Gadhamsetty on Jun 11, 2009 1:45 AM

How to call a stored procedure using its package name in Oracle

hi
we're doing a JDBC scenario where we call a stored procedure(a.prc) using its package name(b)The stored procedure has In /Out/IN-OUT parameter.
i have got 2 queries:
1- How to call the stored procedure using it's package.
2- How to capture the In/Out parameter in the response.

hi Prateek
thanks for the reply.
However when i tried mapping it to Package.procedure, communication channel throws the error saying that Package.proceudre needs to be declared.
As i said , the procedure has IN-OUT parameter too.In oracle we need to write a block if we want to read the IN-OUT parameter.
How to get the IN-OUT parameter in XI?

How to introspect a Stored Procedure in BPm 10g

Could some give points on how to introspect the Stored procedure from BPM

Hi,
I hope you must have created DB connection in External Resources (Workspace).
So Now create one module in catalog component called DBTables, right click on the module -> New -> Catalog Component -> SQL Query -> Select the DB connection that you created earlier -> select the schema, now you can see all the procedure, tables, function that are defined in your schema.Click on the procedure that you want to import to your workspace and click on finish. The procedure will be imported to your workspace.
Hope the above will help you.
Bibhu
Edited by: Bibhuti Bhusan on Jul 14, 2011 10:44 PM

How to compare two files in java & uncommon text should print in text file.

Hi,
Can any one help me to write Core java program for this.
How to compare two files in java & uncommon text should print in other text file.
thanks
Sam

Hi All,
i m comparing two HTML file.. thats why i am getting problem..
import java.io.BufferedReader;
import java.io.FileReader;
public class textmatch{
public static void main(String[] argv)
throws Exception{
BufferedReader fh =new BufferedReader(new FileReader("internal.html"),1024);
BufferedReader sh = new BufferedReader(new FileReader("external.html"),1024);
String s;
String y;
while ((s=fh.readLine())!=null)
if ( s.equals(y=sh.readLine()) ){
System.out.println(s + " " + y); //REMOVE THIS PRINTLN STATEMENT IF YOU JUST WANT TO SHOW THE SIMILARITIES
sh.close();
fh.close(); }
thanks
Sam

How to compare two files in Java & uncommon text should print in Diff text

Hi All,
can any one help me to write a java program..
How to compare two files in Java & uncommon text should print in Diff text file..
Thanks
Sam

Hi All,
i m comparing two HTML file.. thats why i am getting problem..
import java.io.BufferedReader;
import java.io.FileReader;
public class textmatch{
public static void main(String[] argv)
throws Exception{
BufferedReader fh =new BufferedReader(new FileReader("internal.html"),1024);
BufferedReader sh = new BufferedReader(new FileReader("external.html"),1024);
String s;
String y;
while ((s=fh.readLine())!=null)
if ( s.equals(y=sh.readLine()) ){
System.out.println(s + " " + y); //REMOVE THIS PRINTLN STATEMENT IF YOU JUST WANT TO SHOW THE SIMILARITIES
sh.close();
fh.close(); }
thanks
Sam

How to execute a stored procedure/function in TOAD?

Hi, All ,
Can someone please tell me how to execute a stored procedure/function in TOAD?
I have tired
EXECUTE PROCEDURENAME(888), but it doesn’t work.
TOAD give me the error: invalid SQL statement.
Thanks a lot

Write PL/SQl block.
i.e Begin
Procedure name..
end;
Then it will be excuted.
Ashutosh

How do write a stored Procedure in PL/SQL

Hi,
I am new to this forum. I am creating a webpage using Gridview in Visual Studio 2005.
How to write a Stored procedure in Oracle using PL/SQL?
I want to write a SP for the following query :
"Select S_No, Task_ID,Last_Act_Dt,Last_Act_Tm,Status from E002 Order by S_No"
Please help.

In Oracle, you normally wouldn't create a stored procedure that just does a query. Depending on what you're attempting to do on the client side, and the client libraries involved, you may be able to write a stored procedure that returns a REF CURSOR and call that. This will put some limitations on what the client can do with the results, for example. The data would be read-only and scrolling back and forth in the result set would potentially rather slow and rather expensive in terms of client memory. That makes this generally a somewhat unattractive option.
You could create a view in Oracle and just query the view in your application code. If you needed to change the query, you could then just change the view.
Justin

How to compare two stored procedure

Similar Messages

Maybe you are looking for