How to compile php

I want to compile php to enable gd library, and adjust the memory limit up to 16M.
sorry about my spelling, I am still learning the english language, but I appreciate your answers.
xserve g5 Mac OS X (10.4.8)

It's been a while since I installed it, but this was real helpful at the time.
http://www.entropy.ch/software/macosx/php/
It seems they have the latest version, 5.2.0
these were also helpful
http://www.macdevcenter.com/pub/a/mac/2005/08/16/apache.html?page=2
http://nerdvittles.com/index.php?m=20050204
Probably more info on the main PHP site
http://www.php.net/
XServe Mac OS X (10.4.4)

Similar Messages

How to compile PHP so that it will talk to Oracle 8i

We have a server with Oracle 8.1.7 database, Solaris os.
We installed a 8.1.7 client on another machine that we want to compile PHP. How do we compile PHP so that it would talk to the 8.1.7 database through the 8.1.7 client that we installed on the same machine where we installed PHP. Thank you.

The trick is actually in configuring the 10g client to talk to the 8i server. Just set up a tnsname and it should work, or you could use easyconnect:
[jer@workstation ~]$ sqlplus system/password@server:1523/ezftz8i
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Jan 17 16:21:19 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle8i Release 8.1.7.0.0 - Production
JServer Release 8.1.7.0.0 - Production
SQL>Once you have the oracles talking, php is easy.
~Jer

How to upgrade Php Version in solaris 10 SPARC ?

How to upgrade php Version 5.4.7 to latest version 5.5.3?
Do we need to uninstall current version(5.4.7) and install latest version(5.5.3)?
Or is there any way to upgrade directly.

I'm suggesting to remove the initial package and then install a new version that is in the same package format.
You can also compile it and modify the target installation directory during the compilation.

How to compile and run a .java file from another java program

hello,
can any one tell me how to compile and run a *.java* file from another java program which is not in same directory?

Well a smarter way of implementing this is by using a solution provided by Java Itself.
If you are using J2SE 6.0+ there is an in built solution provided along with JDK itself and inorder to go ahead with solution the below are set of API which you;d be using it for compiling Java Programs (Files)
http://java.sun.com/javase/6/docs/api/javax/tools/package-summary.html
How do i do that ??
Check out the below articles which would help you of how to do that
http://www.ibm.com/developerworks/java/library/j-jcomp/index.html
http://www.javabeat.net/javabeat/java6/articles/java_6_0_compiler_api_1.php
http://books.google.com/books?id=WVbpv8SQpkEC&pg=PA155&lpg=PA155&dq=%22javax+tools%22+compiling+java+file&source=web&ots=XOt0siYe-f&sig=HH27ovuwvJgklIf8omTykUmy-eM
Now once we are done with compilation.In order to run a Specific class all you ought to do is create an object and its specific methods of a specified class included in the CLASSPATH which you can manage it easily by usage little bit reflections.
Hope that might help :)
REGARDS,
RaHuL

Errors trying to compile PHP for use with MySQL

I have installed and am using the GNU based tools from the Sunfreeware site to compile PHP. I already have Apache, MySQL, and Oracle compiled and working properly. Below is my configure string for my PHP build:
./configure --prefix=/usr/local/php5 \
--with-config-file-scan-dir=/usr/local/php5/php.d \
--with-apxs2=/var/apps/apache/bin/apxs \
--with-ldap \
--with-mysql=/var/apps/mysql \
--with-mysqli=/var/apps/mysql/bin/mysql_config \
--with-xsl=/usr/local/include/libxslt \
--with-ncurses \
--enable-xslt \
--with-xslt-sablot \
--with-bz2=/usr \
--with-gd \
--with-gdbm=/usr/local/lib \
--with-openssl \
--with-imap=/usr/local/imap-2006e \
--with-imap-ssl \
--with-freetype-dir=/usr/local/include/freetype2/freetype/freetype.h \
--with-expat-dir \
--with-tiff-dir \
--with-zlib \
--with-jpeg-dir=/usr/local/include/jpeglib.h \
--with-png-dir=/usr/include/libpng12/png.h \
--with-mcrypt \
--with-curl \
--with-curlwrappers \
--with-gettext \
--disable-short-tags \
--disable-debug \
--enable-calendar \
--enable-ctype \
--enable-discard-path \
--enable-exif \
--enable-ftp \
--enable-memory-limit \
--enable-sysvem \
--enable-sysvshm \
--enable-gd-native-ttf \
--enable-soap \
--enable-shmop \
--enable-sockets \
--enable-xslt \
--enable-mbstring \
--with-sqlite=shared \
--with-pdo-sqlite=shared \
--with-pdo-mysql=shared,/var/apps/mysql \
--enable-pdo=shared \
--enable-bcmath \
--with-oci8=sharedI have ld, make, and various tools linked to /usr/local/bin/<toolname>. The configure string completes with no issue and the make runs for about 30 minutes before it stops with the following warnings/errors:
/usr/ccs/bin/ld: warning: libssl.so.0.9.8, needed by /usr/local/lib/libldap.so, may conflict with libssl.so.0.9.7
/usr/ccs/bin/ld: warning: libssl.so.0.9.8, needed by /usr/local/lib/libldap.so, may conflict with libssl.so.0.9.7
/usr/ccs/bin/ld: warning: libssl.so.0.9.8, needed by /usr/local/lib/libldap.so, may conflict with libssl.so.0.9.7
/usr/ccs/bin/ld: warning: libssl.so.0.9.8, needed by /usr/local/lib/libldap.so, may conflict with libssl.so.0.9.7
/usr/ccs/bin/ld: warning: libssl.so.0.9.8, needed by /usr/local/lib/libldap.so, may conflict with libssl.so.0.9.7
/usr/ccs/bin/ld: warning: libssl.so.0.9.8, needed by /usr/local/lib/libldap.so, may conflict with libssl.so.0.9.7
/usr/ccs/bin/ld: warning: libcrypto.so.0.9.8, needed by /usr/local/lib/libldap.so, may conflict with libcrypto.so.0.9.7
/usr/ccs/bin/ld: warning: libcrypto.so.0.9.8, needed by /usr/local/lib/libldap.so, may conflict with libcrypto.so.0.9.7
/usr/ccs/bin/ld: warning: libcrypto.so.0.9.8, needed by /usr/local/lib/libldap.so, may conflict with libcrypto.so.0.9.7
/usr/ccs/bin/ld: warning: libcrypto.so.0.9.8, needed by /usr/local/lib/libldap.so, may conflict with libcrypto.so.0.9.7
/usr/ccs/bin/ld: warning: libcrypto.so.0.9.8, needed by /usr/local/lib/libldap.so, may conflict with libcrypto.so.0.9.7
/usr/ccs/bin/ld: warning: libcrypto.so.0.9.8, needed by /usr/local/lib/libldap.so, may conflict with libcrypto.so.0.9.7
<snip>....
/var/apps/php-5.2.5/ext/mysqli/mysqli_nonapi.c:209: undefined reference to `mysql_sqlstate'
/var/apps/php-5.2.5/ext/mysqli/mysqli_nonapi.c:200: undefined reference to `mysql_set_server_option'
/var/apps/php-5.2.5/ext/mysqli/mysqli_nonapi.c:212: undefined reference to `mysql_set_server_option'
ext/mysqli/.libs/mysqli_nonapi.o: In function `zif_mysqli_query':
/var/apps/php-5.2.5/ext/mysqli/mysqli_nonapi.c:251: undefined reference to `mysql_set_server_option'
ext/mysqli/.libs/mysqli_nonapi.o: In function `zif_mysqli_get_warnings':
/var/apps/php-5.2.5/ext/mysqli/mysqli_nonapi.c:298: undefined reference to `mysql_warning_count'
ext/mysqli/.libs/mysqli_nonapi.o: In function `zif_mysqli_stmt_get_warnings'
/var/apps/php-5.2.5/ext/mysqli/mysqli_warning.c:195: undefined reference to `mysql_warning_count'
collect2: ld returned 1 exit status
make: *** [sapi/cli/php] Error 1:
There are many, many more "undefined reference" messages all mysql related.
Here is my environment and crle output:
LD_LIBRARY_PATH=/usr/local/ssl/lib:/usr/local/lib:/usr/local/BerkeleyDB.4.2/lib:/var/apps/mysql/lib/mysql
PATH=/usr/local/bin:/usr/bin:/usr/sbin:/usr/local/sbin:/opt/sfw/bin:/usr/local/ssl/bin:/usr/ucb:/usr/ccs/bin:/opt/VRTS/bin:/etc:/opt/EMCpower/bin:/opt/EMCpower/bin/sparcv9:/etc/emc/bin:/opt/VRTSagents/ha/bin:/usr/local/include:/usr/include:/usr/platform/`uname -i`/sbin:/var/apps/mysql/bin:/var/apps/mysql/include/mysql:/opt/RICHPse/bin:/usr/local/php5/bin:/opt/sfw/sbin
crle output
Configuration file [version 4]: /var/ld/ld.config
Default Library Path (ELF): /lib:/usr/lib:/usr/local/lib
Trusted Directories (ELF): /lib/secure:/usr/lib/secure (system default)
Any ideas as to how I can get around the MySQL errors, etc. would be appreciated.

Here are the requirments for 10.5.8:
Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
512MB of memory
DVD drive for installation
9GB of available disk space
You have to purchase the upgrade from Apple for $129. You ned to call and order ti since it is not listed in their on-line store. You can also try eBay or Craig's List.

Unable to compile PHP on pSeries AIX 5.1

Hello, I have Oracle 9.2 installed and running ok.
When I try to compile PHP with oci8 support, this is what I get:
nd/zend_dynamic_array.lo Zend/zend_execute_API.lo Zend/zend_highlight.lo Zend/zend_llist.lo Zend/zend_opcode.lo Zend/zend_operators.lo Zend/zend_ptr_stack.lo Zend/zend_stack.lo Zend/zend_variables.lo Zend/zend.lo Zend/zend_API.lo Zend/zend_extensions.lo Zend/zend_hash.lo Zend/zend_list.lo Zend/zend_indent.lo Zend/zend_builtin_functions.lo Zend/zend_sprintf.lo Zend/zend_ini.lo Zend/zend_qsort.lo Zend/zend_multibyte.lo Zend/zend_execute.lo sapi/cli/php_cli.lo sapi/cli/getopt.lo main/internal_functions_cli.lo -lintl -lgdbm -lm -ldl -lm -lodm -lbsd_r -lld -lperfstat -lclntsh -o sapi/cli/php
ar: 0707-101 . is not a valid flag.
make: *** [libphp4.la] Error 1
make: *** Waiting for unfinished jobs....
ld: 0711-317 ERROR: Undefined symbol: .OCIEnvInit
ld: 0711-317 ERROR: Undefined symbol: .OCIHandleAlloc
ld: 0711-317 ERROR: Undefined symbol: .OCIInitialize
ld: 0711-317 ERROR: Undefined symbol: .OCIHandleFree
ld: 0711-317 ERROR: Undefined symbol: .OCITransRollback
ld: 0711-317 ERROR: Undefined symbol: .OCIDescriptorFree
ld: 0711-317 ERROR: Undefined symbol: .OCIErrorGet
ld: 0711-317 ERROR: Undefined symbol: .OCIServerVersion
ld: 0711-317 ERROR: Undefined symbol: .OCIDescriptorAlloc
ld: 0711-317 ERROR: Undefined symbol: .OCIAttrSet
ld: 0711-317 ERROR: Undefined symbol: .OCIStmtPrepare
ld: 0711-317 ERROR: Undefined symbol: .OCIAttrGet
ld: 0711-317 ERROR: Undefined symbol: .OCIStmtExecute
ld: 0711-317 ERROR: Undefined symbol: .OCIParamGet
ld: 0711-317 ERROR: Undefined symbol: .OCIDefineByPos
ld: 0711-317 ERROR: Undefined symbol: .OCIStmtFetch
ld: 0711-317 ERROR: Undefined symbol: .OCIStmtSetPieceInfo
ld: 0711-317 ERROR: Undefined symbol: .OCILobGetLength
ld: 0711-317 ERROR: Undefined symbol: .OCILobRead
ld: 0711-317 ERROR: Undefined symbol: .OCILobFileClose
ld: 0711-317 ERROR: Undefined symbol: .OCILobFileOpen
ld: 0711-317 ERROR: Undefined symbol: .OCISessionBegin
ld: 0711-317 ERROR: Undefined symbol: .OCISessionEnd
ld: 0711-317 ERROR: Undefined symbol: .OCIServerAttach
ld: 0711-317 ERROR: Undefined symbol: .OCIServerDetach
ld: 0711-317 ERROR: Undefined symbol: .OCIBindByName
ld: 0711-317 ERROR: Undefined symbol: .OCIBindObject
ld: 0711-317 ERROR: Undefined symbol: .OCIBindDynamic
ld: 0711-317 ERROR: Undefined symbol: .OCILobWrite
ld: 0711-317 ERROR: Undefined symbol: .OCITransCommit
ld: 0711-317 ERROR: Undefined symbol: .OCIPasswordChange
ld: 0711-317 ERROR: Undefined symbol: .OCIObjectFree
ld: 0711-317 ERROR: Undefined symbol: .OCICollAppend
ld: 0711-317 ERROR: Undefined symbol: .OCINumberFromReal
ld: 0711-317 ERROR: Undefined symbol: .OCIDateFromText
ld: 0711-317 ERROR: Undefined symbol: .OCIStringAssignText
ld: 0711-317 ERROR: Undefined symbol: .OCICollGetElem
ld: 0711-317 ERROR: Undefined symbol: .OCINumberToReal
ld: 0711-317 ERROR: Undefined symbol: .OCIDateToText
ld: 0711-317 ERROR: Undefined symbol: .OCIStringPtr
ld: 0711-317 ERROR: Undefined symbol: .OCICollAssign
ld: 0711-317 ERROR: Undefined symbol: .OCICollAssignElem
ld: 0711-317 ERROR: Undefined symbol: .OCICollSize
ld: 0711-317 ERROR: Undefined symbol: .OCICollMax
ld: 0711-317 ERROR: Undefined symbol: .OCICollTrim
ld: 0711-317 ERROR: Undefined symbol: .OCITypeByName
ld: 0711-317 ERROR: Undefined symbol: .OCIDescribeAny
ld: 0711-317 ERROR: Undefined symbol: .OCITypeByRef
ld: 0711-317 ERROR: Undefined symbol: .OCIObjectNew
ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
collect2: ld returned 8 exit status
make: *** [sapi/cli/php] Error 1
I am using gcc 3.3.3.
./configure output:
checking for Oracle-OCI8 support... yes
checking Oracle Install-Dir... /oracle/product/920
checking Oracle version... 8.1
checking for OCILobIsTemporary in -lclntsh... (cached) no
checking for OCILobIsTemporary in -locijdbc8... (cached) no
I already type gencltsh as user oracle. Perhaps this is a problem with PHP trying to read 64 bit libs while running on 32 bit mode ? Anyone has been thru this ?
Any hints ?
Thanks,
Ãlvaro

Maybe my bug report http://bugs.php.net/bug.php?id=31345
can help you, and also
http://bugs.php.net/bug.php?id=31001
because i remembre have same message when I was searching for my problems
Regards

How to compile and register a Java CFX tag with multiple class files?

All-
If this is the wrong forum for CFX questions, please let me
know.
I need to determine how to compile and register a Java CFX
tag that contains multiple class files. One class file implements
the CustomTag interface and the other class files implement various
supporting classes. All of the documentation that I have found
talks about using a single class file. I am assuming that a JAR
file will be involved, but I am not sure of the specifics.
Thanks in advance for your help.
-Josh

Yes, it will involve a jar. Use your java IDE (eclipse,
etcetera ..) to create a jar containing all of the classes. Check
your ide's documentation for how to create jar files. After you
have created the jar, place the jar in the CF class path so CF will
recognize it. For example the {cf_root}/WEB-INF/lib directory. CF
must be restarted before it will detect the new jar. After
restarting CF, register the CFX tag in the ColdFusion Administrator
using the name of the class that implements the CustomTag
interface.
Though it is worth noting you can also instantiate java
classes directly from ColdFusion (ie without using a CFX
tag).

How to compile Oracle Linux source?

I accidentally downloaded source DVD "Oracle Linux Release 5 Update 2 source - DVD" instead of installable ISO image. Is there anyway I can compile it to make bootable ISO image?
I tried to search this forum as well as other places but couldn't find any information hence thought of opening a thread before I proceed to download correct file which will again take 10+ hrs with my Internet speed :(
Any help is highly appreciated. Also I need to know which packages are required to be installed for compiling the source if at all that is possible. I am using Ubuntu 11.10 Desktop.
Thanks in advance for any help and hope to get a reply soon :) I need to urgently install Oracle 11gR2 on it.
Edited by: user6582219 on Apr 12, 2012 1:10 AM
While browsing the forum for any possible solution I came to a thread that discuss installation of a package oracle-rdbms-server-11gR2-preinstall. When searched through search engine I came to know about recent certification Oracle 11gR2 on Oracle Linux 6, here is the link https://blogs.oracle.com/linux/entry/announcing_oracle_database_11g_r2
https://blogs.oracle.com/linux/entry/announcing_oracle_database_11g_r2
Thing is I already have Oracle Linux 6 Update 2 (the latest) installed on my machine in dual boot mode so I dropped the idea of installing version 5.2. As per the documentation 11gR2 was not certified earlier on Linux 6.2 so I thought of installing 5.2 but it is not necessary now.
I would still appreciate if someone could answer my question just for knowing the procedure compiling source. May be it can help someone else trying to achieve this.
I have another couple of important questions and need guidance from the experts over here. I am not sure if it is appropriate to open a new thread but for now I am posting them here.
Before proceeding here are my environment details:
Machine: x86 32 bit with 2 GB RAM/250 GB HD.
OS: Kubuntu 11.10 Desktop and Oracle Linux 6 Update 2 in dual boot mode.
Here are my partition details for your reference but as I am planning to do the installation from the scratch following new ideal scheme you can jump to last paragraph following the line "*********************************" for my questions.
Unfortunately my partition plan went wrong and here is what I have now:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x3d5ba9e1
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1002047 500000 83 Linux
/dev/sda2 151525080 361253654 104864287+ 7 HPFS/NTFS/exFAT
/dev/sda4 1003518 151001087 74998785 5 Extended
/dev/sda5 1003520 7002111 2999296 82 Linux swap / Solaris
/dev/sda6 7004160 11001855 1998848 83 Linux
/dev/sda7 11003904 51001343 19998720 83 Linux
/dev/sda8 51003392 110041087 29518848 83 Linux
Partition table entries are not in disk order
/dev/sda1 here is /tmp, /dev/sda2 is my data partition, I have separate /home / (root) partition for Kubuntu and remianing around 20 GB in extended partition is used for Oracle Linux 6.2 with default Oracle suggested LVM partition. I also have separate /boot for Kubuntu and I chose not to install grub while installing Oracle Linux. I later modified grub.cfg to add entries for Oracle Linux and now I can boot both OSs successfully.
My issue now is I cannot extend 20 GB space (in extended partition) that I have given to Oracle though I have around 40 GB space available. This is because I alreay have 4 primary partitions (one for /boot others for "data" and one extended partition). So I have to make primary partition out of free space and install Oracle in a single partition without following recommended partition layout scheme.
Now I want to do the installation of both the OS from the scratch and really need an advice on partition layout scheme. Here is summary of what I wan to achieve:
1. Keep the "data" partition (primary) intact and carve an ideal partition layout for both the OS with separate /boot, /tmp, /home, swap (and may be for /usr???). Also may be I can share swap?
2. How do I go about using LVM and is it recommended for this case? What would be ideal locations for each partitions and sizes? I already used 100 GB for "data" so now I want to keep 60 GB for Oracle Linux (and Oracle DB for which I will again make few sub-partitions) and remaining will be for Kubuntu.
Well, I am not sure if this is the right place to ask these questions but since I can see very knowlegeable top contributors here that are willing to help novice users I thought of posting these questions.
I would really really appreciate if someone can provide me rough draft of partition scheme in my case considering the sub-partitions needed for Oracle DB. I went thorugh number of forums and documentations to come up with solutuion and finally thought of getting help after much confusion.
I really need to carefully plan this time because it's third time I am doing reinstallation from the scratch because of poor plan I followed previously.
Thank you very much in advance and please let me know in case more information is needed from my side.
Regards,
Ramesh

I accidentally downloaded source DVD "Oracle Linux Release 5 Update 2 source - DVD" instead of installable ISO image. Is there anyway I can compile it to make bootable ISO image?Google will be your best friend for such a question, for instance, "Creating a Custom centos Linux bootable ISO Image". There is no need to duplicate the effort. I recommend you download the correct installation DVD, e.g. 5.8
Thing is I already have Oracle Linux 6 Update 2 (the latest) installed on my machine in dual boot mode so I dropped the idea of installing version 5.2. As per the documentation 11gR2 was not certified earlier on Linux 6.2 so I thought of installing 5.2 but it is not necessary now.So you don't need to install 5.2 anymore, but you want the information how to compile a installation DVD from the 5.2 source anyway?!
I have another couple of important questions and need guidance from the experts over here. I am not sure if it is appropriate to open a new thread but for now I am posting them here.Questions may be important for you, but not necessarily for others. No one will complain if you create a new thread for particular questions or subjects. It is better to separate your topics and questions rather than creating a multi-mega thread, which does little to help anyone else but you. It means more work on your end, but it will be easier for anyone to participate or answer your questions, and it will allow you to better award answers.
Regarding your partitioning questions: It is generally difficult to address such topics in a forum. You are asking for a book of information. My advice is to drop the old fashioned concepts of dual or triple boot options and install Oracle VirtualBox instead. It will make all of these questions obsolete and you can use whatever defaults when installing your virtual machine guest OS. Its a far more superior way of dealing with multiple operating systems on one and the same computer.
I am using Ubuntu 11.10 Desktop.
I need to urgently install Oracle 11gR2 on it.For what it's worth, if you can combine the two source below you should be able to install and run 11gR2 on Ubuntu 11.10.
Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto
Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto
However, check out VirtualBox.

How to compile a single file in a project

I have placed my java connector file called "xxxTargetconnector .class" in the below mentioned path
D:\FSCM9DMO\webserv\FSCMDMO9\applications\peoplesoft\PSIGW\WEB-INF\classes\com\peoplesoft\pt\integrationgateway\targetconnector
I have converted the above class file in to a java file using a decompiler.Now i would like to recompile the java file to get the byte code.This class file imports many class files from jar files which is placed in the below mentioned path.
D:\FSCM9DMO\webserv\Cybersource.
Before compiling i set the path to include the jar files
for ex , set path = D:\FSCM9DMO\webserv\Cybersource
For compilation i went to the below path using command prompt and compiled the particular file.
D:\FSCM9DMO\webserv\FSCMDMO9\applications\peoplesoft\PSIGW\WEB-INF\classes\com\peoplesoft\pt\integrationgateway\targetconnector>javac xxxTargetConnector.java
Unfortunately i got around 99 errors saying
xxxTargetConnector.java:187: cannot find symbol
symbol : variable Logger
location: class com.peoplesoft.pt.integrationgateway.targetconnector.xxxTargetConnector
How to compile a single file in a project ?

According to [http://java.sun.com/javase/6/docs/technotes/tools/windows/javac.html], "As a special convenience, a class path element containing a basename of * is considered equivalent to specifying a list of all the files in the directory with the extension .jar or .JAR. I have never tried using this feature.
So if all of your dependent classes are in in jar files that are in D:\FSCM9DMO\webserv\Cybersource, a command like the following should work.
javac -cp D:\FSCM9DMO\webserv\Cybersource\* xxxTargetConnector.java
Note that setting your operating system path variable has no impact on where Javac looks for dependent classes.

How to compile all forms in a directoy at time?

Hi friends, thank for your replies for the previous questions.
Now
How to compile all form modules located in a directory
at a time? usually what I know is opening form one by one
and compile it. But I want to compile all forms and create
executable files at a time.
Is project Builder helpfule to achive this??
thanks
madhu

Yes, his file is useful -- it should run on Windows XP. You need to copy the above text into a file using a standard text editor, something like Notepad. To run it, you open a Cmd.exe DOS window on your pc, change directory (CD) to the folder where your forms are, and enter the command script file name.
Here are several more links to other topics in this forum asking how to do the same thing:
Re: How To Compile 370 forms ?
Re: Creating Oracle 10g Forms and Reports Builds

How to compile a java file which is in memory?

how to compile a java file which is in memory?
such as:
String s="class MyClass {....}";
how to compile the string?
thx

come on ...That was a perfectly valid solution.
Do you know how to call the sun.* compiler? If not then search the forums for it. If that interface still exists (which it might not in newer versions) you then will create a string stream from your class and pass it to that.

Pls help me on how to compile servlet

pls i need the help of some kind one to assist me on how to compile and deploy servlet .I'm new to javaEE & am using the javaEE tutorial from sun site.In the first example servlet in d book, after compiling and deploying the greetingServlet and responseServlet and deployed it ,i was told to include a welcome jsp file in d war file. all these i have done but the server always complain of not been able locate d greetingServlet.
i use the netbeans IDE and sun java application server.The greetingServlet & responseServlet codes are these; Pls I don't know what to put in the jsp file
package servlets;
import java.io.*;
import java.util.*;
import java.sql.*;
import javax.servlet.*;
import javax.servlet.http.*;
* This is a simple example of an HTTP Servlet. It responds to the GET
* method of the HTTP protocol.
public class GreetingServlet extends HttpServlet {
    public void doGet(
        HttpServletRequest request,
        HttpServletResponse response) throws ServletException, IOException {
        response.setContentType("text/html");
        response.setBufferSize(8192);
        PrintWriter out = response.getWriter();
        // then write the data of the response
        out.println("<html>" + "<head><title>Hello</title></head>");
        // then write the data of the response
        out.println(
                "<body bgcolor=\"#ffffff\">"
                + "<img src=\"duke.waving.gif\" alt=\"Duke waving\">"
                + "<h2>Hello, my name is Duke. What's yours?</h2>"
                + "<form method=\"get\">"
                + "<input type=\"text\" name=\"username\" size=\"25\">"
                + "<p></p>" + "<input type=\"submit\" value=\"Submit\">"
                + "<input type=\"reset\" value=\"Reset\">" + "</form>");
        String username = request.getParameter("username");
        if ((username != null) && (username.length() > 0)) {
            RequestDispatcher dispatcher = getServletContext()
                                               .getRequestDispatcher(
                        "/response");
            if (dispatcher != null) {
                dispatcher.include(request, response);
        out.println("</body></html>");
        out.close();
    public String getServletInfo() {
        return "The Hello servlet says hello.";
package servlets;
import java.io.*;
import java.util.*;
import java.sql.*;
import javax.servlet.*;
import javax.servlet.http.*;
* This is a simple example of an HTTP Servlet. It responds to the GET
* method of the HTTP protocol.
public class ResponseServlet extends HttpServlet {
    public void doGet(
        HttpServletRequest request,
        HttpServletResponse response) throws ServletException, IOException {
        PrintWriter out = response.getWriter();
        // then write the data of the response
        String username = request.getParameter("username");
        if ((username != null) && (username.length() > 0)) {
            out.println("<h2>Hello, " + username + "!</h2>");
    public String getServletInfo() {
        return "The Response servlet says hello.";
}

Here is what you will need to do.
1. Compile the servlets by performing the following steps
1.1 Open a command line in the directory where your servlets are located.
1.2 Type the following commands
1.2.1 javac GreetingServlet.java
1.2.2 javac ResponseServlet.java
Then you should see the .class files for these classes appear in the directory .
Next you will put these class files in the WEB-INF/classes directory.
Once you have done that you will edit your web.xml in the WEB-INF directory to include the two servlets. That code will look something like this
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
     <servlet>
          <servlet-name>GreetingServlet</servlet-name>
          <servlet-class>GreetingServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>GreetingServlet</servlet-name>
          <url-pattern>/GreetingServlet</url-pattern>
     </servlet-mapping>
     <servlet>
          <servlet-name>ResponseServlet</servlet-name>
          <servlet-class>ResponseServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>ResponseServlet</servlet-name>
          <url-pattern>/ResponseServlet</url-pattern>
     </servlet-mapping>
</web-app>Once you have done this save the web.xml file and recompile the war file by following these steps
1 open a commandline in the root directory where the servlets are
2 type the following command jar -cvf warFileName.war .
*Note the space and period at the end of the command are not a mistake the space . tells the jar tool to complie the war from the directory you are current in.
Once this command is successfully ran you should see a .war file appear in the directory you are in. Then simply put the war file in your deploy directory of your server and you are finished.
alternatly if you are just doing this for yourself to learn servlets and this is not going to be deployed anywhere then I would just use the W3C's Jigsaw server which does all the work for you all you have to do is compile the servlets and put the class files in the servlets directory and you are done.

How to Compile & Deploy the Java Concurrent Program File

Hi,
There is a requirement to create the Java Concurrent Program in Oracle eBusiness. I am able to create the Java Concurrent Program file. But unable to do the following things:
1.Since it is custom file, which location I will deploy the file?
2. How to compile the file?
3. In the execution file path and executable file name what should I specify for JCP?
Please guide me.
Thanks

Please see (How to register and execute Java Concurrent Program ?in Oracle Applications R11i ? [ID 186301.1]) for the complete steps (i.e. define concurrent program and add it to the request group, .etc.) -- This is also applicable to R12.
You may also see:
Classpath Setting of Third Party Jar Files in R12 Java Concurrent Program (JCP) [ID 1292694.1]
Integrating Custom Applications with Oracle Applications [ID 176852.1]
Java Concurrent Program FAQ [ID 827575.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=Java+AND+Concurrent+AND+Program&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How to compile menu in forms

Dear All
How to compile menu if anyone already using the menu
if it is possible will you please reply.

Thank you for sending me reply
but my problem is when compile the menu if any user
access the menu
form builder doesn't allow to compile it. for that i
have to down the form serverAre you sure you're talking about Oracle Forms Builder??
You can compile your source .mmb even if there's any user running the runtime of your menu .mmx
What you can't do is, you cannot replace (overwrite) the .mmx if there is any session using it.
Tony

Can not compile php with "-with-oracle=/usr/local/oracle"

I work on Linux engine with a x86_64 architecture and use Oracle 10g 10.2.0.1 client for x86_64 linux
so - when i try to compile php with the oracle argument (-with-oracle=/usr/local/oracle) i get everytime the same error:
checking Oracle version... configure: error: Oracle needed libraries not found
I think, maybe i have a problem because configure not found my "64 bit libraries"...
Can someone help me? I am realy helpless...
thx

Did you really want the obsolete "oracle" driver - why not use --with-oci8?
The user comments in http://www.php.net/oci8 have some good info on 64bit configuration.

How to compile php

Similar Messages

Maybe you are looking for