How to completely remove the excess footage from a trimmed clip?

I'm sure there is a very basic answer for this, and I'm simply inexperienced.
I just can't seem to find this exact problem stated anywhere.
My issue involves time remapping.
I'm working on a MacBook Pro, using dynamic link between Premiere Pro CC and After Effects CC. When I select a single "slice" of a clip I have trimmed down with the razor and open it in AE via direct link, it works well, and I proceed to enable time remapping. All goes as I want it to.
The issue arises when, immediately, I notice that the start and end key frames are not visible because they are actually placed at both ends of the full clip, NOT my trimmed down version. When I place key frames at the ends of the smaller area I want to work with, I notice that if I want to move those end frames inward, it actually pulls the excess footage from the sides into the work area, which I would expect if I didn't have the comp trimmed to the work area.
I'm sure this is just ignorance, but I want to be able to work ONLY with the trim I made, and if I want to pull my end keyframes around, I need them to leave blank black space, NOT the rest of the footage. How do I actually chop out the trim so this works the way I want it to?
Thanks so much in advance. I'm not well versed in the terminology for this program yet and I hope I was able to explain the issue at least halfway clearly.

When you enable time remapping, AE automatically creates keyframes at the start and end of the entire clip, regardless of how it's been trimmed (as you already know).
While there's no way to automatically do what you want, it's an easy manual process.
Enable Time Remapping.
Go to the in point of the trimmed clip (press i) and add a keyframe.
Go to the out point of the trimmed clip (press o) and add a keyframe.
Use the keyframe arrow buttons in the timeline to step forward to the end-of-layer keyframe. Even if it's outside the composition time so you can't see it, it can still be (invisibly) navigated to. Then remove the keyframe by clicking on the remove/add keyframe button between the two arrows.
Navigate to the start-of-layer keyframe and do the same.
Now you should have just two keyframes, at the start and end of the trimmed layer.

Similar Messages

How can I remove the Demo Viewer from my MacBook?

How can I remove the Demo Viewer from my MacBook?

Drag it to the Trash.
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
    1. AppZapper
    2. AppDelete
    3. Automaton
    4. Hazel
    5. AppCleaner
    6. CleanApp
    7. iTrash
    8. Amnesia
    9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.

How do I remove the white space from the bottom and side of my document?

How do I remove the white space from the bottom and side of my document? (I'm not talking about printing, just viewing it on the screen.) There are about 6 inches of white space at the bottom and at the right hand side. I don't like this. On a blank new spreadsheet it's triple that amount of white space.

The infinite canvas convention doesn't make a lot of sense for Numbers. When I'm viewing a spreadsheet and mistakenly scroll into white, empty space I think, "this is ridiculous - all of my content is fits on one screen. there's nothing over there."
A (relatively) infinite canvas is logical for Microsft Excel because it's one big table. There are 256(?) columns by default and hundreds of rows on a sheet - there are cells outside what a user is looking at to see. However, when viewing a Numbers spreadsheet with a single 10 column 10 row table that fits on the screen, there's nothing else on it to scroll to.
Numbers should distinguish between viewing a spreadsheet and editing one. When I'm just viewing, when there's no content outside the window it shouldn't scroll there. This window behavior is beyond annoying for Numbers on my iPad and iPhone.
(Adding user-defined canvas size setting to my view mode / edit mode thinking would probably be the most complete solution to this now that I think about it.)
Until now the way scrolling worked in Numbers has defied logic. Actually it still does lol. That said, thank you Yellowbox for providing a clear explanation. Much appreciated.

How do I remove the Adobe updater from the Mac menu bar?

I would like to remove the Adobe Updater from my menu bar for my Mac, I found a lot of instruction to remove it for other versions of the updater, but the I can't find that option in the new CS6 updater.
If there is a way to completely stop the updater from running, that would be useful too.
I also don't understand why the updater say "4" in the menu bar, I only have Photoshop installed, and there are no update avaiable.

I am one of the many for whom Application Manager just started to crash every time I tried to open it. I was also getting the 'trial' dialog box, then a request for a serial number, even though I subscribe to Creative Cloud.
After hours with Adobe Tech Support, I have gone the around-your-elbow-to-get-to-your-mouth method of creating a second user and installing CC apps there...hopefully this is temporary situation, but a girl has to work.
My question is this: how do I remove the updater notifications from the menu bar [original user] if I can't open Application Manager? It crashes every time...besides, Tech Support had me send it to the trash and delete it. I went to my other user ID, updated all, but I'm still showing the annoying update badge in my original menu bar. [Altho' Camera Raw failed to update...that's another issue]
Please advise. I had CS5.5 Design Premium...maybe it would be easier just to upgrade that to CS6 and ditch Creative Cloud!
Thanks in advance.

How can we remove the following zeros from quantity field ?

Hi All.
how can we remove the following zeros from quantity field while populating ALV by using FM REUSE_ALV_GRID_DISPLAY ?
eg:getting output zqty = 2.000
but i need           zqty = 2.
help me to reslove this issue.
Regards.
jay

Hi,
While populating the field catlog do the following thing to   avoid zeros.
wa_fieldcat-tabname = 'I_OUTPUT'.    " Curr
wa_fieldcat-fieldname = 'FWAER'.
wa_fieldcat-seltext_l = text-023.
wa_fieldcat-no_zero = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Thanks,
Khushbu.

I had an iphone. I have a new iphone and no longer use the old one. How to do remove the old one from my icloud account?

I had an iphone 4 on Sprint. I switched to Verizon and purchased a 5S. Kept the same phone number and affiliated the new phone to my existing icloud ID. How do I remove the old device from my icloud ID?

and this if not already done
iCloud: Remove your device from Find My iPhone

HT3702 how can i remove the authorization hold from my card...

how can i remove the authorization hold from my card

You can try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store
How much was the amount ? A 'normal' holding charge is a small amount (e.g. equivalent to about $1), and usually happens after you add or change credit card details on your account. Here in the UK it can take a few working days for it to disappear (so a weekend can extend the elapsed time).
Edit : I don't know what a non-liability certificate is and/or whether Apple can do one.

I just installed Firefox 5. How can I remove the Bing search from the address bar? I don't want to see Bing at all.

I just installed Firefox 5. How can I remove the Bing search from the address bar. I don't want to see Bing at all. I tired the Firefox options, right-clicking on the search field and the toolbar selection drop-down but could not find a way to get rid of that unwanted search window.

*'''at the bottom of firefox''' there is a weird looking greenish circle with a lightning bolt in it*
1. click it and hover over to '''PREFERENCES'''.
2. click the second circle that say's '''BING.'''
3. '''Un-check''' both boxes.
4. you're done :)
Note: it's not going to show the google symbol encrypt when you open a new tab it's just going to automatically use google as a search engine.

HT1277 how can i remove the email add from a deleted mailbox from the prompts of the 'from' field?

how can i remove the email add from a deleted mailbox from the prompts of the 'from' field?

Thanks a lot, roam! That worked

How can I remove the background sound from the headphone jack for my MacBoo

for my MacBook Air problem adding music intensifier (Panasonic ST-HT1000) to give it an unpleasant sound background that sounds like a whiz, it's not so loud, but it is an unpleasant .. after a short time can get used to, but the fizz does not pass, however, believe that it is a big problem.
Further I notice that when MacBookAir disconnected from the charger, it remains quieter sound.
At first thought that the headphone jack (3.5 mm Headphone:
Connection: 1/8-Inch Jack) or wiere have problem, but tried 3 different cables, but that does change enything, the problem remains.
When I added iPhonu3GS playing - the background sound were not, then everything is OK!
How can I remove the background sound from the headphone jack for my MacBook Air 13?

There is no way to bring that up unless you have it typed in a document. You can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
http://support.apple.com/kb/HT2526?viewlocale=en_US
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  240G Vertex 3 SSD Boot HD 

How can I remove the moon phases from iCal?

I need to remove ALL the moon phases that appear in iCal 5.0.3. Every time iCloud updates it sends 6 to 10 moon events to my MacBook Pro. Going forward 3 0r 4 months, there are too many moon phases. How can I remove the moon phases from iCal?
I am on a MacBook Pro 2.2 with 4 GB using Mountain Lion 10.7.5.

Try:
items.RemoveAll(s => string.IsNullOrEmpty(s));
Or you can filter them out using where:
var noEmptyStrings = items.Where(s => !string.IsNullOrEmpty(s));
Having fun with custom collections!
Basics of .NET Collections in C#
How does it work in C#? - Part 3 (C# LINQ in detail)
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

How can I remove the " Source.vi" from long Express VI Names?

I am in the Moment working on the Development of an Express VI
library for test purposes.
How can I remove the " Source.vi" from long Express VI Names?
This happens when the Express VI is inserted in the blockdiagram
and listed in LabVIEW and TestStand Palettes.
By short names like "DAQ-Assistent" or "EasyCalc" the string " Source.vi"
is not shown at the end of the Express VI names.
I used The Express VI Dev Toolkit 1.0 to create the Express VIs.
Labview Version: 7.1 Base
TestStand: 3.1
It would be great to get the expert advice from the Forum for this issue!
Thanks a lot.
Andre

I think I understand what you are asking for. If I am wrong, please try to explain it a bit more.
The name shown may be different than the name of the vi file. To do this, your source VI and popup on its icon. From the short menu that comes up, select VI properties. In the top ring, select Window Appearance. The page that comes up lets you set various things that can affect the appearance of the VI. What you want to change is the window title. Uncheck the Same as VI name checkbox and change the string to whatever you want it to be.
I hope that this helps,
Bob
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

How can I remove the blocked contacts from skype h...

Peace be upon you
How can I remove the blocked contacts from skype home and all skype features?

I found this solution and it worked.
Paul B. Adams
Re: safari 6.0 flash problem (blocked plug in)
Jul 26, 2012 7:39 AM (in response to defconnect5)
I have a new MacBook Pro and I followed these instructions, downlonading and installing the new Flash plugin. But when I looked in "/Library/Internet Plugins" there was no folder called "Disabled Plugins".
However, I did see two versions of Flash:
_Flash Player.plugin with old date
Flash Player.plugin with todays date
I deleted _Flash Player.plugin and this fixed the problem.

How can i remove the shell case from cath kidston?

Hi how can i remove the shell case from cath kidston

Try:
items.RemoveAll(s => string.IsNullOrEmpty(s));
Or you can filter them out using where:
var noEmptyStrings = items.Where(s => !string.IsNullOrEmpty(s));
Having fun with custom collections!
Basics of .NET Collections in C#
How does it work in C#? - Part 3 (C# LINQ in detail)
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

How can I remove the blue background from my PDFs files

How can I remove the blue background from my PDFs files

Which tutorial?
Answers are in your HTML and CSS code. What is the link to your online test page?
Nancy O.

How to completely remove the excess footage from a trimmed clip?

Similar Messages

Maybe you are looking for