How to compose one email and sent to everyone in category

how to compose one email and sent to everyone in category (Yahoo mail contacts).

I think you're confused about some basic Java programming techniques.
There are two obvious ways to do this.
1. Call the addRecipient method in a loop.
2. Collect all the recipients in a List, convert it to an array, and call addRecipients.

Similar Messages

  • How to dump deleted emails and sent emails. Thank You

    Greetings, When I delete my email it goes to trash and then I have to delete them again one at a time, isn't there a dump click available, and the same for sent emails that one does not keep. Thanks for this help.
    PS I am a new user, had outlook express on my last computer.

    trash and junk have a right click empty option. So it is not one at a time. Holding shift when you delete will bypass the trash folder, but there is no undo if you get it wrong when you accidentally delete the inbox instead of a single mail in it.

  • HT5621 When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?

    When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?

    You cannot merge Apple IDs but you can go to Settings > iCloud and 'Delete Account'.  When prompted to turn off documents and data, choose the only option which is Delete from my iPhone, but on the other prompt for Contacts, Calendars, etc you can choose 'Keep on my iPhone'  Then once the Account is Deleted form the iPhone, log back in with the correct Apple ID and choose Merge when prompted.  This will merge your data from this iPhone with that iCloud account effectively putting your devices on the same account.

  • How to send one email to entire group.

    Looking for reference on how to send one email to entire group.

    I think you're confused about some basic Java programming techniques.
    There are two obvious ways to do this.
    1. Call the addRecipient method in a loop.
    2. Collect all the recipients in a List, convert it to an array, and call addRecipients.

  • How to save my emails and adressbook files from an old ibook?

    How to save my emails and adressbook files from an old ibook (bought around 2002) ?
    The screen from the old ibook doesn´t work anymore (logicboard problem I guess).
    I saved everything else with starting it in target modus. That worked fine.
    I want to delete the files after that as well, because I wanna give away the old ibook and don´t want anyone to read my emails!
    Little helpers I have:
    A running MacBook
    External Screen (and cables to connect)
    Fire Wire Cable

    Don't know how helpful this will be but I often copy mail from one computer to another, I drag the mail from the mail window to the other computers drop box, then from the other computer double click it and mail asks me what I want to do with it, of course without a screen you'd need to use back to my mac.
    If you don't have back to my mac running, you could set up a second user account on the newer mac, import everything via target mode as suggested by c above, and then drag the mail to the first user account drop box.

  • How to use one email adress for multiple recipients

    Hello,
    I'd like to know how to use one email adress for multiple recipients. 
    this would be very useful or projects. for example;
    if i send one mail to [email protected], all people in this project get an email.
    I will add the people in this project myself. 
    I know it is possible, but I don't know how to do it ;-)
    please help me! 

    Hope this help.
    _http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

  • I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.

    I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.

    I am not aware of a way except for photos that allows you to select multiple files in an email. I even checked settings in the Adobe Reader app, and it does not show that ability.

  • How do I get email and text message notifications when my phone is locked?

    How do I get email and text message banner notifications on my iphone when the phone is locked? When I had iOS 6 I could get notifications with sound and banner. Now that I have iOS7 I can't see notificaitons when the phone is locked.

    See if this support document about Notifications helps. http://support.apple.com/kb/HT3576

  • How to display your email and a message to finder on the lock screen of an iPhone?

    Hi,
    I loose things, including phones and keys...
    To prevent a worst case scenario: How to display your email and a message to finder on the lock screen of an iPhone? (6 plus, current iOS)
    That is, I assume most people finding an iPhone would want to try to contact me to give it back to me, if they know how: how can leave my contact information in the phone? This needs to be on the lock screen, naturally, as this is the only view the finder can see. It would be useful to be able to add a message of sorts a la "if found please call my wife ### or email me ###".
    How can this be done other than editing the JPG of the wallpaper, or sticking a business card to the back of the phone (these are the only solutions I came up with, there must be something better).
    Cheers!

    Greetings _daniel_, 
    Thank you for contributing to the Apple Support Communities. 
    It seems like you'd like to display a message on your iPhone 6 Plus in the event it is lost. Good news--you can do this with the Find my iPhone feature of iCloud.
    Check out these links for more information:
    iCloud: Set up iCloud
    iCloud: Use Lost Mode
    If you can’t find your device, use Lost Mode right away to lock it with a passcode, display a custom message on the screen, and keep track of its location.
    Cheers, 
    Jeremy

  • When I compose an email and send it goes to my outbox. Why?

    WHen I compose an email and hit the send button, it goes to my outbox. Why?

    Hi Chhubbard711,
    This article contains information on issues with sending emails and would apply to your situation with the emails going to an outbox:
    iOS: Unable to send or receive email
    http://support.apple.com/kb/ts3899
    Cheers!
    - Ari

  • Having issues receiving MMS and/or media content. I have visited several forums and did successfully receive at least one photo and sent one photo sucessfully. However, I am now unable to receive media via MMS. Phone displays message: "Get Media Content N

    Having issues receiving MMS and/or media content. I have visited several forums and did successfully receive at least one photo and sent one photo sucessfully. However, I am now unable to receive media via MMS. Phone displays message: "Get Media Content Now 30KB", but it only emits a tone after pressing. I have add a MMS VPN already. Any suggestions??? Thanks!

        Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • How do I restore email and drafts from Apple Mail in Time Machine after account was deleted.

    My Apple Mail email account was deleted by a support person and I lost several hundred emails and close to 1100 drafts that I desperately need. I have been using an external drive for backing up in Time Machine. 
    I do not know how to get my emails and drafts out of Time Machine and onto my Apple drive.
    Any help would be appreciated  HUGELY!

    Command-R to the rescue.
    Just hold down Command-R during startup and Lion Recovery springs into action. It lets you choose from common utilities: You can run Disk Utility to check or repair your hard drive, erase your hard drive and reinstall a fresh copy of Lion, or restore your Mac from a Time Machine backup. You can even use Safari to get help from Apple Support online. And if Lion Recovery encounters problems, it will automatically connect to Apple over the Internet.
    When boot into Recovery and select item 1, you will be given a choice of a point to recover from.

  • TS4002 iCloud for email is not on my Mac. How can I get email and iCal to sync with iphone and ipad.

    iCloud for email is not on my Mac. It should be under Internet and wireless in System Preferences but it is not. Basically I am trying to get iCloud running successfully on my Mac for email and Calendar so that it will sync with my iPad and iPhone. I was an MobilMe customer and I've been having trouble with this conversion to iCloud. Thanks.

    I too was a mobileme user and have just migrated to iCloud on mackbook pro w/OS 10.7.4. Transition caused my sent mailboxes to rearrange themselves so that I have no comprehensive 'sent' mailbox as I did previously and the view on both incoming and outgoing mailboxes keeps rearranging itself no matter how many times I set preferences. One result is that search function no longer works.  Is anyone else having problems like this?  All was fine for a week after transition but after having an evening when my password was repeatedly rejected I had to log in and out of iCloud (as directed by tech support) and w/in an hour or so the mailbox problem began.

  • How to take off email and website subscription from 2006  iMac to sell?

    I have a desktop Imac that I bought in 2006 and would now like to sell. I also bought a laptop in 2007 that I prefer using. How do I remove the email and website subscription from the desktop model without messing up the laptop info? They seem to be connected at this point and I am not sure how to take off the information from one without damaging the other.

    Have you solved this problem? If not, can you be more specific? You can change the email account information using Email preferences. Which website subscription would you like to remove?

  • How to reconfigure notification email and smtp addresses

    Hi all,
    I want to reconfigure notification email and smtp addresses on single instance db (10.2 and 11.1 versions). How this is done?

    emca -reconfig dbcontrol db [email protected]
    /opt/oracle/product/11gR1/db/bin/emca [operation] [mode] [dbType] [flags] [parameters]
    -h | h | -help | help: prints this help message
    -version: prints the version
    -config dbcontrol db [-repos (create | recreate)] [-cluster] [-silent] [-backup] [parameters]: configure Database Control for a database
    -config centralAgent (db | asm) [-cluster] [-silent] [parameters]: configure central agent management
    -config all db [-repos (create | recreate)] [-cluster] [-silent] [-backup] [parameters]: configure both Database Control and central agent management
    -deconfig dbcontrol db [-repos drop] [-cluster] [-silent] [parameters]: de-configure Database Control
    -deconfig centralAgent (db | asm) [-cluster] [ -silent] [parameters]: de-configure central agent management
    -deconfig all db [-repos drop] [-cluster] [-silent] [parameters]: de-configure both Database Control and central agent management
    -addInst (db | asm) [-silent] [parameters]: configure EM for a new RAC instance
    -deleteInst (db | asm) [-silent] [parameters]: de-configure EM for a specified RAC instance
    -reconfig ports [-cluster] [parameters]: explicitly reassign Database Control ports
    -reconfig dbcontrol -cluster [-silent] [parameters]: reconfigures RAC Database Control deployment
    -displayConfig dbcontrol -cluster [-silent] [parameters]: displays information about the RAC Database Control configuration
    -migrate -from dbcontrol -to centralAgent [-repos drop] [-cluster] [-silent] [parameters]: migrates EM configuration from Database Control to central agent
    -upgrade (db | asm | db_asm) [-cluster] [-silent] [parameters]: upgrades an earlier version of the EM configuration to the current version
    -restore (db | asm | db_asm) [-cluster] [-silent] [parameters]: restores the current version of the EM configuration to an earlier version
    Parameters and Options:
    [parameters]: [ -respFile fileName ] [ -paramName paramValue ]*
    db: perform configuration operation for a database (including databases that use ASM)
    asm: perform configuration operation for an ASM-only instance
    db_asm: perform upgrade/restore operation for a database and an ASM instance
    -repos create: create a new Database Control repository
    -repos drop: drop the current Database Control repository
    -repos recreate: drop the current Database Control repository and recreate a new one
    -cluster: perform configuration operation for a RAC database
    -silent: perform configuration operation without prompting for parameters
    -backup: configure automatic backup for a database
    Parameters for single instance databases
    ORACLE_HOSTNAME: Local hostname
    SID: Database SID
    PORT: Listener port number
    ORACLE_HOME: Database ORACLE_HOME
    HOST_USER: Host username for automatic backup
    HOST_USER_PWD: Host user password for automatic backup
    BACKUP_SCHEDULE: Automatic backup schedule (HH:MM)
    EMAIL_ADDRESS: Email address for notifications
    MAIL_SERVER_NAME: Outgoing Mail (SMTP) server for notifications
    ASM_OH: ASM ORACLE_HOME
    ASM_SID: ASM SID
    ASM_PORT: ASM port
    ASM_USER_ROLE: ASM user role
    ASM_USER_NAME: ASM username
    ASM_USER_PWD: ASM user password
    SRC_OH: ORACLE_HOME for the database to be upgraded
    DBSNMP_PWD: Password for DBSNMP user
    SYSMAN_PWD: Password for SYSMAN user
    SYS_PWD: Password for SYS user
    DBCONTROL_HTTP_PORT: Database Control HTTP port
    AGENT_PORT: EM agent port
    RMI_PORT: RMI port for Database Control
    JMS_PORT: JMS port for Database Control
    EM_SWLIB_STAGE_LOC: Software library location
    PORTS_FILE: Path to a static file specifying the ports to use (Default value : ${ORACLE_HOME}/install/staticports.ini).
    Additional Parameters for cluster databases
    CLUSTER_NAME: Cluster name
    DB_UNIQUE_NAME: Database unique name
    SERVICE_NAME: Service name
    EM_NODE: Database Control node name
    EM_SID_LIST: Agent SID list [comma separated]

Maybe you are looking for

  • How do I get the fn key on the aluminum keyboard to work like Insert under Windows?

    How do I get the fn key on the aluminum keyboard to work like Insert under Windows without having to press fn + Enter? This article explains the problem but has no real solution: Boot Camp: About keyboards and key assignment for Microsoft Windows - A

  • Difference between Business content of 2004 and 2004s

    Hi all, I was looking at the Business Content delivered with BI 2004 (BW 3.5)and BI 2004s (BW 7) for <b>Payroll</b> at the below links. It seemed they are almost the same. Can anyone tell me if there is any major difference between the two (specifica

  • Custom transform fails

    I'm creating a custom transformation by implementing oracle.oai.agent.server.transform.Transformable and reading in the .tdf file in IStudio. The contents of the .tdf file is: name=ConcatStringsAdvanced package=mypackage class=ConcatStringsAdvanced d

  • Exit a j2me app

    Hi i have a timeout function my my midlet class that if it reached a certain point when nothing happens, i display an alert screen thats set to forever and execute a command this.notifyDestroyed(); when i do this the alert screen doesnt disapear and

  • Problem Programing

    Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Kenneth Rinderhagen>cd C:\ C:\>java HelloWorldApp Exception in thread "main" java.lang.NoClassDefFoundError: HelloWorldApp Caused by: java.lang.