How to conf in Hyperion, so the system couldn't login with the same user

Hai.....
how to configure in Hyperion, so the system couldn't login with the same user id in different machine ? (could you please provide me with detail step by step ? )
rgds
uka fp

fane_j wrote:
Sally R. wrote:
Someone gave me a suggestion to go to the terminal and type in the following:
ls /Users/Shared/.*.so
This was published on MacWorld's site, and it's not a very good tip. Try this instead
ls -la /Users/Shared/*.so
Turns out I was wrong about that. Somebody else suggested something even more complicated and got this reply:
By bastion
Fri Feb 24 08:49:05 PST 2012
PeterSParker said
Your terminal statement has an extra "." in it that prevents it from working.
Also, you should add the options -alR to show what is happening, and to search subdirectories.
The revised command looks like this:
ls -alR /Users/Shared/*.so
The above is completely wrong. The command as shown in the article is appropriate.
The "." is not extra and doesn't prevent the command from working. It's specifying that you're listing files that start with a period and end with ".so" with anything in between being matched.
Because you're explicitly searching for things that start with "." you don't need the -a flag.
Because you only care about simple existence and not any metadata you don't need -l.
Because the files of interest are installed in /Users/Shared directly, and not subfolders thereof, you don't need -R.

Similar Messages

I have Snow Leopard ver.10.6.8 and I have uninstalled iwork, because I don't have the equation writer on pages. So I re install it from the iwork's disk and when I tried to open any of the Apps, the system told me " check with the developer to make sure

I have Snow Leopard ver.10.6.8 and I have uninstalled iwork, because I don't have the equation writer on pages. So I re install it from the iwork's disk and when I tried to open any of the Apps, the system told me " check with the developer to make sure Keynote (for example) works with this version of Mac OS X "
iwork was running in my computer just a few moment ago !
Can anyone tell me what can I do? thanks

So I re install it from the iwork's disk
Did you repair permissions and restarted your computer after the installation? Check SU?

Just got the Iphone 6 and it paired BT with the car phone system okay. But it will not pair with the audio part where I could play my recorded music with my 5-C. The system will not connect with the phone and the message is that the settings

My toyota Seinna 2011 refuses to connect with my Iphone 6 as a "portable player". Message says for me to adjust the player. On the phone it is searching for other devices but not connecting. Now same phone is paired with the car multimedia system and will take and make calls. Help!

I very much doubt it if you consider how much data Apple release to App developers
to allow them to create apps that work under iOS
Audi being lazy like most of the other motor manufacturers
They will be registered developers and as such get all the info and data they need

X needs the system to be booted with the mouse unplugged

Hi,
Something really strange is happening since the first time I installed arch on my machine: as I start the X server, it begins running the mouse-wheel, even if I do not touch the mouse at all. It starts slowly and then it accelerates over and over. It is really annoying since I see all my desktops flashing all around the screen, cannot see web pages cause they auto-scroll upwards and neither can use any kind of menu..
Today I stated that if I start the computer leaving my mouse unplugged, then start the X server and plug the mouse in, it works properly.. I think it is some kind of mouse detection issue into the driver but do not know how to handle it.
I re-installed the whole thing about 5 times because of this, at first It started occurring after an upgrade, but other times the problem occurred almost randomly..
I think this is an arch-only related issue, since I used ubuntu, gentoo, and windows with no problem at all..

please post /var/log/Xorg.0.log

I tried to install a new os x mountain lion, but the system asked me to provide the apple id and password that was used to buy the os from the apple store online. which i don't have. how do i go ahead to install my new os x on the mC

i tried to install a new os x mountain lion, but the system asked me to provide the apple id and password that was used to buy the os from the apple store online. which i don't have. how do i go ahead to install my new os x on the mC

If you don't have the Apple ID and password, how did you get Mountain Liomn in the first place? Without the Apple ID and password, you'll need to buy it to download it.
Mountain Lion

I have a 2008 vintage iMac with 2.8GHz processor and recently upgraded to OS X 10.9.5. Soon after theupgrade the mail system started switching the senders address to another address, but same user name. How do you fix this?

I have a 2008 vintage iMac with 2.8GHz processor and recently upgraded to OS X 10.9.5. Soon after theupgrade the mail system started switching the senders address to another address, but same user name. How do you fix this?

Thanks for the reply,. I went to the site provided and executed the directions but this did not solve the issue.
Even more details:
If I send a message to the Jane Doe address from another account on this machine (all my family uses the same email services provider and each have accounts set up on this machine), when you open it, it shows Jane Doe then the <applejax.xx> address AND the picture associated with the Apple Jax account.
So the problem shows up when the message is sent to this account from this machine, AND when it is sent from this machine from this account. No other accounts on the machine are effected.
I have sent and received email messages from the mail service provider's website, and everything is fine.

How to verify that the system isn't infected with a virus

Does anyone know how to check to see if your system has been infected with any type of malware? I read in an article at zdnet.com that there was a Mac OS X trojan spotted, but the article did not say how to locate whether or not you had been infected. I do not have a virus checker on my computer. Someone gave me a suggestion to go to the terminal and type in the following:
ls /Users/Shared/.*.so
Any comments?

fane_j wrote:
Sally R. wrote:
Someone gave me a suggestion to go to the terminal and type in the following:
ls /Users/Shared/.*.so
This was published on MacWorld's site, and it's not a very good tip. Try this instead
ls -la /Users/Shared/*.so
Turns out I was wrong about that. Somebody else suggested something even more complicated and got this reply:
By bastion
Fri Feb 24 08:49:05 PST 2012
PeterSParker said
Your terminal statement has an extra "." in it that prevents it from working.
Also, you should add the options -alR to show what is happening, and to search subdirectories.
The revised command looks like this:
ls -alR /Users/Shared/*.so
The above is completely wrong. The command as shown in the article is appropriate.
The "." is not extra and doesn't prevent the command from working. It's specifying that you're listing files that start with a period and end with ".so" with anything in between being matched.
Because you're explicitly searching for things that start with "." you don't need the -a flag.
Because you only care about simple existence and not any metadata you don't need -l.
Because the files of interest are installed in /Users/Shared directly, and not subfolders thereof, you don't need -R.

When trying to log on to my personal hotspot on my Ipone, after entering the password the system continues to ask for the password over and over again. How do I fix this?

When trying to log on to my personal hotspot on my Ipone, after entering the password the system continues to ask for the password over and over again. How do I fix this?

Hi SheilaStuhr,
The troubleshooting steps detailed below can help get you connected to your iPhone's personal hostpot.
Basic troubleshooting
See if your iOS device, computer, and wireless plan all meet the system requirements for Personal Hotspot.
Make sure Personal Hotspot is on: Tap Settings > Cellular > Personal Hotspot.
Check the Internet connection on your iOS device: Tap Safari and load a new webpage.
If one connection type doesn't work, try another. For example, instead of connecting using Wi-Fi, use USB or Bluetooth.
Turn Personal Hotspot off and on: Tap Settings > Personal Hotspot or Settings > Cellular > Personal Hotspot.
Install the latest version of iOS.
Reset your network settings: Tap Settings > General > Reset > Reset Network Settings.
If you still see the issue, restore the iPhone.
If you're still experiencing issues, try the steps below.
Wi-Fi troubleshooting
If you encounter an issue using Personal Hotspot with other Wi-Fi devices, try these steps:
Turn Personal Hotspot off.
Turn on Wi-Fi: Tap Settings > Wi-Fi.
Turn on Personal Hotspot.
If another device can't join your Wi-Fi network, make sure the Wi-Fi password is correct.
If the device can't see your Wi-Fi network, check your device name. Windows may not correctly show a device name that uses non-ASCII characters.
See how many devices are using your Personal Hotspot. Depending on your wireless carrier, the number of Wi-Fi connections may be limited to three devices at once.
If the other device still can't connect, turn Wi-Fi off and on for the device.
Make sure that your device can see other Wi-Fi networks.
Note: If you see "Unable to Join" or a timeout error when you try to connect a device using Wi-Fi, remain on the Personal Hotspot screen until the first device connects. After the device connects, you can leave the Personal Hotspot screen and use your iPhone normally. Your device will stop broadcasting Wi-Fi if you put it to sleep or if 90 seconds elapse and no connected devices use Wi-Fi. To share your Wi-Fi network again, tap Settings > Personal Hotspot.
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/en-us/HT203302
All my best,
Allen

Running the net or sc commands with the rights of the local System

Hi
In Windows 7 SP1, how do I run the net or sc commands with the rights of the local System?
Thanks
Bye
Balubeto

Hi,
I agree with
T. Kujala , it's easy to achieve this goal with PsExec.exe, the tool is easy to download and use.
http://blogs.technet.com/b/askds/archive/2008/10/22/getting-a-cmd-prompt-as-system-in-windows-vista-and-windows-server-2008.aspx
If you don't want to use external utilities, then this link below might give you some hints
http://blogs.msdn.com/b/adioltean/archive/2004/11/27/271063.aspx
Yolanda Zhu
TechNet Community Support

How do I open photoshop? I have it downloaded and only the Adobe Application manager shows with the

How do I open photoshop? I have it downloaded and only the Adobe Application manager shows with the list of other software. I clicked on photoshop, but not responding.

Nobody can know. Your information is far too vague - no system info, no other details. Just saying that it doesn't work is not conducive to providing assistance...
Mylenium

Cannot download book. ..the system is already connected with an other apple id. ???

My Mac is used from me and my wife with two different users on the System.
Wa are also use iPhone and iPad.
My wife purchased a ebook with the iPad in the apple store. Now she would like to read the book on the mac.
But when she would download the book she got the messages, that the system is already connected with an other apple id.
How can we fix this? And why connected with an other apple Id?
Thanks for help
Regards
Andy

Each device can only be authorized for one Apple ID at a time, and the authorization can only be changed once every 90 days.

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings?

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.

You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.

I redirected iTunes to an external drive and moved my iTunes library and folder, but my hard drive is still low on space. How can I be sure that my music is all on the external HD ONLY, especially with the new iCloud technology?

I redirected iTunes to an external drive and moved my iTunes library and folder, but my hard drive is still low on space. How can I be sure that my music is all on the external HD ONLY, especially with the new iCloud technology? It doesn't look like I created any more space by doing this, AND I totally lost all my iTunes playlists. I'm not sure if because I added old library materials manually if this messed up my playlists, or if the new location is just not reading my moved library. In any case, I followed step by step instructions and found a few holes and thought I'd just "figure it out" but I guess I'm not as smart as I thought since I'm still scratching my head many hours later.
Thanks for any support ;-)
Eaglerocker

Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the option (alt) key (shift on Windows) so you get a prompt to select a library, then guide it to the 'iTunes Library.itl' file in the moved iTunes folder.
If this is to a new computer and you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music then you don't even need to start with the option key held down, iTunes will automatically look for it there. (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527 - a somewhat bewildering and not always easily understandable set of options.

After I make a note in the notes icon that came with the ipad, it immediately is emailed to my email address and disappears from notes. How can I make it stay on notes?

After I write a note in the notes icon that came with the ipad, it immediately emails it to my email account and erases it from the note pad. How do I make it stay on the notepad? I don't particularly want it emailed to me.

I have a test with some questions (multiple choice, FIB, matching, etc). I have just one button to submit all the answers, and after submiting the student can see his score and review the test to know where he failed. He can't answer again. However, he can change the answer multiple times before submiting.
"if i turn on success/failure captions the student will see them while answering" - before submitting
"if i turn them off he wont know what's the right answer" - after submitting
My results page is the default. I didn't use any variable. When i go to the results page after reviewing the test all the entry boxes are "wrong".

HT2204 My husband and I have the same apple id. We would like to each have our own. He will keep the original one, but how do I get a new apple Id and keep all the things I have associated with the old apple id?

My husband and I use the same apple Id. We would like to each have our own apple id, but we do not want to lose all our information associated with the current id. One of us will keep the original. If one us creates a new apple id how will that affect the iPhone and iTunes?

That would be my suggestion. Just keep using the common one for purchases in the stores. Then each get another AppleID using a free gmail, AOL, hotmail, MS Live or whatever email account.
Delete your current iCloud account and login with the new AppleID, and logout of Messaging and then backin with the new AppleID. Now you have a shared iTunes/App store account, but completely separate, independent iCloud and iMessage accounts.
You can still share calendars if you wish to, even across separate accounts - http://support.apple.com/kb/ph2690

How to conf in Hyperion, so the system couldn't login with the same user

Similar Messages

Maybe you are looking for