How to config authority when use SSO

I have defined some groups in the RPD file, now the obiee use SSO, can I reuse these groups and filters on gorup? How to assign the users in OID to the Specific groups.
Thanks.

I used a windows machine (client and server running on windows) to build the datawarehouse. then execute loads from the linux server..
I did get the odbc installed but was a pain.. then it quit working and couldn't get it working again.. so I went the temporary windows route...
I also had trouble configuring informatica.. did the same thing.. ran it from a windows maching running the server then moved back to linux.

Similar Messages

How to retrieve character '#' when use Shift key + 3 instead of use Option key + 3?

Hi everyone,
Kindly advice how to retrieve character '#' when use Shift key + 3 instead of Option key + 3.
Thank you in advance.

Hi Tom,
Thanks for your proposed solution. The problem has been solved.

HT1495 how to delete apps when using one account for iphone 4s and ipod4, can delete from phone but not ipod

How do we delete apps from ipod 4 when using same account as iphone 4s, we can delete from the phone but not the ipod, and when i get an app on my phone it automatically comes up on the ipod and visa versa, now ipod is full,

Read the article from which the thread was posted, it clearly defines how to use multiple iDevices on a single computer.
Sharing an Apple ID is not an issue.

K3011w - How disable the touchpad when using USB mouse?

Is there a way to disable the touchpad on the docking keybd when using a USB mouse? It is a real pain typing along and be in the middle of sentence some where else on the page.

hi whippetguy,
Thanks for Posting,
   The touchpad on the dock uses a Windows driver and does not have any special Software to Disable it via shortcut,
How I found to go around on what you need is
With the tablet on the dock with no USB mouse yet
                  Press (Windows key+x) and choose device manager on the list
                        On Device Manager window open mice and pointing device and rightclick disable
This should disable the dock touchpad and Now you can plu in your USB mouse,
Before you unplu your USB mouse after use, Go to device manager again and Enable the device you disabled.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to let SAP user use SSO to access Application in DMZ?

Hi All,
Our J2EE application is running on a system in DMZ which can not be connected with LDAP. So I am wondering if it's possible to let SAP user use SSO to access our application.
After talking with my colleague I think the only way is to import SSO public key to our WebAS and create user in UME and then assign user to the corresponding public key, but anybody know where to download SSP verification file or is it allowed to download and import into another system at all?
Regards,
Bin

Hi,
Take a look at this example, it uses property nodes to select tha
active plot and then changes the color of that plot.
If you want to make the number of plots dynamic you could use a for
loop and an array of color boxes.
I hope this helps.
Regards,
Juan Carlos
N.I.
Attachments:
Changing_plot_color.vi ‏38 KB

How to suppress SCHEMA_OWNER when using DBMS_METADATA.GET_DDL

Hi,
I was wondering, is it possible to suppress the owner when using dbms_metadata.get_ddl?
SQL> select * from v$version where rownum = 1
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
SQL> exec dbms_metadata.set_transform_param (dbms_metadata.session_transform,'SEGMENT_ATTRIBUTES',false)
SQL> select dbms_metadata.get_ddl('TABLE','EMP') from dual
DBMS_METADATA.GET_DDL('TABLE','EMP')
CREATE TABLE "SCOTT"."EMP"
   (     "EMPNO" NUMBER(4,0) NOT NULL ENABLE,
     "ENAME" VARCHAR2(10),
     "JOB" VARCHAR2(9),
     "MGR" NUMBER(4,0),
     "HIREDATE" DATE,
     "SAL" NUMBER(7,2),
     "COMM" NUMBER(7,2),
     "DEPTNO" NUMBER(2,0)
   )I would like to get rid of the "SCOTT". Alternatively to change it into something else.
Is that possible, without post processing the output, that is?
Regards
Peter

Hi Karthick,
I was afraid that would be the answer. It can be done, but it seems rather convoluted:
SQL> create or replace function get_table_ddl(table_name    varchar2
                                        ,schema        varchar2 default user
                                        ,new_owner     varchar2 default null)
   return clob
is
   v_handle        number;
   v_transhandle   number;
   v_ddl           clob;
begin
   v_handle := dbms_metadata.open('TABLE');
   dbms_metadata.set_filter(v_handle, 'SCHEMA', schema);
   dbms_metadata.set_filter(v_handle, 'NAME', table_name);
   v_transhandle := dbms_metadata.add_transform(v_handle, 'MODIFY');
   dbms_metadata.set_remap_param(v_transhandle,'REMAP_SCHEMA',schema,new_owner);
   v_transhandle := dbms_metadata.add_transform(v_handle, 'DDL');
   dbms_metadata.set_transform_param(v_transhandle,'SEGMENT_ATTRIBUTES',false);
   v_ddl := dbms_metadata.fetch_clob(v_handle);
   dbms_metadata.close(v_handle);
   return v_ddl;
end;
Function created.
SQL> select get_table_ddl('EMP') from dual
GET_TABLE_DDL('EMP')
CREATE TABLE "EMP"
   (     "EMPNO" NUMBER(4,0) NOT NULL ENABLE,
     "ENAME" VARCHAR2(10),
     "JOB" VARCHAR2(9),
     "MGR" NUMBER(4,0),
     "HIREDATE" DATE,
     "SAL" NUMBER(7,2),
     "COMM" NUMBER(7,2),
     "DEPTNO" NUMBER(2,0)
1 row selected.Regards
Peter

How to prevent email when using find my iphone

Hi there,
Am I the only that finds the email confirmations annoying when using find my iPhone?
Is there any way to prevent these emails, or a preference somewhere to turn them off?

Apple:
Considering the threads here and on other Internet sites, this is clearly a safety issue. As a parent who uses this feature on my children's phone - this feature should be optional. Notifying the bad guy when you are searching for your phone/child is not an option. Thank you.

How to define range when using oo environment

Hi all,
I have a doubt regarding this when using OO:
DATA: spfli_wa TYPE spfli,
r_carrid TYPE RANGE OF spfli-carrid,
r_carrid_line LIKE LINE OF r_carrid.
Is there a structure I can do "type" for the work-area?
Thanks in advance,
Edited by: orgasmics on Sep 9, 2010 9:23 PM

Hello,
if you maintain or develop your class in transaction SE24 for example, then you will find a button Local Types in the Icon Bar.
Click on it and define a Type range.
E.g.
TYPES : rnge_bukrs TYPE RANGE OF bukrs.
TYPES : rnge_line TYPE LINE OF rnge_bukrs.
That will create a range table type and a structure of the same type.
You can use these types in any data statements of any method in that class or attribute of your your class or interfaces of your methods.
Hope that is what you are looking for.
Cheers

How is image resampled when using Crop Tool Presets?

If I use the Crop Tool preset of 4 X 6 inches on a 8 X 10 inch image of the same resolution, what type of interpolation does PS use to reduce the image size? I am reducing the size of a finished multilayered file to insert it into a greeting card template.
I know that when using the Image Size dialogue, you can choose whatever type of image interpolation you want, like bicubic sharper for reducing the size of an image. Can you do the same with the Crop Tool? Thanks.

chris -
could this be included in the option bar to change the resampling per instance instead of a prefs setting? I set up some actions to change the prefs for up and down scaling and then revert to the default pref setting. But it was never convenient so I don't use the actions.
or maybe just and pref to use "smart scaling" that chooses the interpolation method based upon whether it is up or down scaling.
j

How to smooth text when using 720p HDTV as monitor?

I know I'm not using the best choice for a Monitor, but want to tweak it the best I can.
Sony Bravia BX 320, 720P TV as my monitor
New Mac Mini bought yesterday
1080P Display Setting in Mini's display profiles
720P ibid
Connected via HDMI
Have tried tweaking around with different Mac Display profiles and color calibrations. Above look the best as far as resolution and picture when sitting far away from screen.
Closer I get to screen, the more pixelated and crappy the text looks, which is really bad
What are the tweakablle settings, both in the monitor and computer I would want to play with to smooth the text out as best as is possible given my monitor choice?
What would be a better "TV" choice to use as a monitor for my Mini? I only run a Roku and OTA HDTV into the TV tuner.
Is there a choice that looks good in both TV and Mini monitoring applications?
Thanks so much.

I have never used any of this, I have never needed to use it. I just know that the information is around and has been useful to others.
I also saved this tutoial that I found once. Perhaps it can help you;
SwitchResX Tutorial
0. All of this is easier to do if you have a portable Mac, since you can configure the external display while viewing everything on the built-in display. You can do it with only the external display (your big TV, that is), but it's tedious.
1. Get the proper cable to connect your Mac to the display (VGI, DVI, or DVI->HDMI, depending on your display's inputs; if you're using a portable Mac with only mini-DVI you'll need the adapter *and* a cable).
2. Connect the display and turn on the Mac. Launch the SwitchResX Control application (if all you're doing is setting up a custom configuration, you don't need the preference pane and thus don't need APE either).
3. In the SwitchResX Control application, select the display you want to configure in the "Settings of:" menu (if it isn't selected already) and click the "Display" tab. Then click the "Export DDC" button and select a location to save the file.
4. Using the text editor of your choice (TextEdit works, or you may have a preference for something else) open that file you just exported. You should see at least one Monitor Description Block (mine has two, labeled Descriptor #0 and Descriptor #1). This should give you a starting point. Mine looks like this:
Code:
    Descriptor #0 is Timing definition:
    Mode = 1920 x 540 @ 60Hz
        H. Active...............1920 pixels
        H. Blanking.............280 pixels
        V. Active...............540 lines
        V. Blanking.............22 lines
        HSync Offset............88 pixels
        HSync Pulse Width.......44 pixels
        VSync Offset............2 lines
        VSync Pulse Width.......5 lines
        Pixel Clock.............74.25MHz
        Horizontal freq.........33.75kHz
        Vertical freq...........60.05Hz
        H Image Size............16mm
        V Image Size............9mm
        H Border................0 pixels
        V Border................0 lines
            Interlaced
            Sync: Digital separate with
                * Positive vertical polarity
                * Positive horizontal polarity
Note that the Mode is described as 1920 x 540 @ 60Hz, interlaced. It's actually 1920 x 1080, interlaced. I'm not sure why the vertical resolution is half what it should be there, but that's an important detail to note. If yours looks like it's half what it should be, you'll have to double it below. Use your common sense here.
The next step depends on what problem you need to solve. If you have a picture and you just need to adjust its position and/or size, you have the easier task and these instructions can help you. If you don't have a picture at all, the values provided by your display are invalid, and you'll have to do some research to find valid values (I can't help you find them). Search and/or ask on this forum, and also try Google.
5. Click on the "Custom" tab in the SwitchResX Control app. Click the "+" button to create a new resolution. Select "Custom" in the menu at the top (as opposed to "Scaled"). Start by entering the values in the Monitor Description Block you exported and opened in a text editor. The thing to realize as you get started is that all the numbers interact with each other, and as you change one value the application will recalculate the others if they're affected by the change. At a given resolution, the number of horizontal pixels and the number of vertical lines in each box always have to add to the same totals, and you can get those values by adding the "Active" and "Blanking" values in the Monitor Timing Block. To stick with my display, the horizontal pixel values must add up to 2200 (1920 (H. Active) + 280 (H. Blanking)), and the vertical line values must add up to 1124 (2 * (540 (V. Active) + 22 (V. Blanking))). The horizontal and vertical scan rates are calculated using those total values and the pixel clock value.
This is a very important concept to understand. With a constant pixel clock value and constant totals of Active + Blanking in both axes, the scan rates should also remain constant. If you have changed your active, porch, or sync width values and the scan rates don't add up, you won't get any picture. To use my display as an example again:
Code:
Pixel Clock 74.25 Mhz, Interlaced
            Horizontal      Vertical
Active:     1920 pixels     1080 lines
Frt. porch: 88 pixels       4 lines
Sync width: 44 pixels       10 lines
Back porch: 148 pixels      30 lines
Scan rate: 33.75 kHz       60.05 Hz
Note that 1920 + 88 + 44 + 148 = 2200, and 1080 + 4 + 10 + 30 = 1124.
6a. Adjust the values to fit your display (heh). This is the trial-and-error portion of the task, and is also slightly counterintuitive. You can get an idea of the adjustments you need to make if you use DisplayConfigX to display an "Image Size Test" (in the "Test Screen" tab). It'd make life easier if that were built into SwitchResX, but anyway:
If you need to shrink the visible area, decrease the Active value and increase the front or back porch values by the same amount. If you need to increase it, do the opposite. It helps to work incrementally (say, by multiples of 8) and save and test your work as you go along. Note that you may not actually need to restart the computer: I found that I could just unplug the HDMI cable from the back of my display and plug it back in, and the new settings would take effect. Remember to click "OK" (and not "Cancel") in the Timing Parameters window, then "Apply" in the main window, before you do this, or before you reboot. Otherwise your changes will be lost.
The porch values are counterintuitive. The horizontal "front porch" is the right edge of the screen (not the left as you might expect); the vertical "front porch" is the bottom edge of the screen. To move the image to the right, decrease the horizontal front porch and increase the horizontal back porch; to move it to the left increase the front porch and decrease the back porch. To move the image up, increase the vertical front porch and decrease the back porch, to move it down, decrease the front porch and increase the back porch. Again, it helps to save and restart or disconnect/reconnect the display to test these adjustments. The "Quick change" buttons in the bottom right-hand corner of the Timing Parameters window will adjust the porches for you, but note that in older versions the buttons were reversed (down means up and left means right, if you catch my drift). That's been fixed in version 3.7.6, apparently.
Also, remember as you adjust porch values that you shouldn't ever need to change the sync width.
6b. You know how I said you might not need to restart the computer? That's not actually 100% true for some displays. When I boot my computer with the display connected, the image is shifted to one side. If I subsequently change resolutions in software or disconnect and reconnect the display, the image will shift back. I got around this problem by first coming up with a configuration that was properly aligned after such a switch. After I had that I rebooted and estimated how far the image was shifted to one side. I then adjusted the porch values, saved, rebooted, and tested again. I now have two configurations, one for "fresh boot" that's adjusted for that sideways shift, and one I can use if I've changed the resolution for some reason. After all that, my default settings are now:
Code:
Pixel Clock 74.25 Mhz, Interlaced
            Horizontal      Vertical
Active:     1834 pixels     1024 lines
Frt. porch: 120 pixels      40 lines
Sync width: 44 pixels       10 lines
Back porch: 202 pixels      50 lines
Scan rate: 33.75 kHz       60.05 Hz
Again, 1834 + 120 + 44 + 202 = 2200, and 1024 + 40 + 10 + 50 = 1124. The Pixel Clock and both scan rates are the same as I found in the DDC.
Note also that if you have the same sideways shift problem, your two resolutions can't be identical (the system won't know which one to select). I made mine different by two pixels of horizontal resolution, which turns out to be rounded off in practice anyway (so one's 1832 x 1024, and the other's 1834 x 1024, with porch values adjusted accordingly, but they both look the same).
At this point you should be able to align your desktop to your display by iterating through these steps, applying your changes, and either disconnecting and reconnecting the display or rebooting.
7. If ever you go horribly wrong and go from having a misaligned picture to having no picture at all, you'll have to delete the override installed by SwitchResX. Boot the computer into Safe Mode, launch the SwitchResX Control app again, and click the "Factory settings" button, then the "Apply" button, and reboot.
And as a preemptive strike: no, I probably don't own your display and don't know the numbers for it offhand, and my consulting rate is $45/hr (really!).
Copyright Fedward. All rights reserved, all wrongs reversed.

How to config not to use Default run target

Hi All,
How can I config Jdeveloper9.0.3 not to use runner's "default run target" from "project settings", instead, to use welcome file list in web.xml?
thanks a lot!

This is currently how it is implemented in JDev903. The JDev webapp runner uses the project default run target instead of using the directory and relying on the welcome files in the web.xml.
Obviously a workaround is to set the default run target to observe the welcome file in the web.xml.
We haven't really seen people asking for this to be implemented in our webapprunner but we'll discuss it..

How to publish changes when using a personal domain

Hi,
I am about to publish my first website using MobileMe but with a personal domain.
I have learned how to publish the site for the first time using File>Set up personal domain but what do I use when I want to publish any changes ?
Do I use the File>Publish to MobileMe option or some other method ?
Thank you

f1stevef wrote:
Do I use the File>Publish to MobileMe option...?
Yes. You can read more about using personal domains with iWeb here.

How to back up when using Disk Utility off the DVD

Hello. i ran into some problems installing snow leopard and can't get back into 10.5. i can only boot into my windows partition. how would i go about creating a back up from Disk Utility being run off of the installation dvd?

If your OS X partition cannot be accessed then you may not be able to back it up. If you have another computer with FireWire then you can try booting the computer into Target Disk Mode. If you can access the drive from the other computer, then you can try recovering your files. Otherwise see the following:
Basics of File Recovery
Files in Trash
If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten with recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

How to download Yosemite when using a third party ssd

I currently have a 13" macbook pro with retina display. I was running Mavericks just fine with my Transcend JetDrive 720 480gb SATA III SSD installed. When Yosemite was released, I downloaded it and everything seemed to be going well when it installed, until I restarted it. When I restarted it, it prompted me to log in with my password, and after I put in my password, it got stuck about midway through another loading screen.
Any ideas on how to get it working? I do have a Time machine backup of right before I tried updating. As well as the beta for Yosemite on another external hard drive that works fine (it's the only way i can currently use my computer).
I've tried rebooting, reinstalling the update, verifying/repairing disk through Utilities, and nothing worked. It keeps getting stuck at the same point after it asks for my password to log in.
Thanks

If the program you are using uses he Apple APIs correctly then it is easy - just look in the lower left under the media browser - Media ==> photos ==> iPhoto
As I remember CostCo does not do this correctly and it is more difficult
LN

How to fiter entity when use account transfer

Hi, Experts
I use the business rule - account transfer to calculate some accounts, and I put the logic in DEFAULT.LGF
It's not suit for all the entities, one entity (ENTITY1) will be exclude.
It means when I send data with ENTITY1, the logic will not be executed.
How can I achieve this?
Regards,
Richie

I try to write logic like follow, and it occurs "invaild when/endwhen" error when validate the code.
*XDIM_MEMBERSET ENTITY = %ENTITY_SET%
*WHEN ENTITY
*IS <uFF1E "ENTITY1"
*RUN_PROGRAM CALC_ACCOUNT
CATEGORY = %CATEGORY_SET%
CURRENCY = LC
TID_RA = %TIME_SET%
CALC=LRB
OTHER = [ENTITY=%ENTITY_SET%]
*ENDRUN_PROGRAM
*ENDWHEN
Edited by: Richie Wang on Aug 5, 2010 2:52 PM

How to config authority when use SSO

Similar Messages

Maybe you are looking for