How to config Autonomous AP 1242/1252 the WPA2 and AES encryption

Hi Guys,
Do you know how to configure the autonomous AP1242 and AP1252 use new authentication way: WPA2 and encryption as AES to support 11n ?
right now, our AP only configure the SSID as WH001 as network access.
dot11 ssid WH001
   authentication open eap ea1
   authentication network-eap ea1
   accounting ac1
How about the new SSID WH003 (new 11n)
dot11 ssid WH003
  authenticaion ?
  authentication?
  account?
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode wep mandatory
encryption mode? 
ssid WH001
ssid WH003
channel 2437

Well the 1242 doesn't support 802.11n. Here is a link to configure 802.11n on an ap that supports 802.11n like the 1252.
http://www.cisco.com/en/US/docs/wireless/access_point/12.4.25d.JA/Configuration/guide/scg12.4.25d.JA-chap6-radio.html
Here is a link that shows how to setup WPA2/AES which is required for 802.11n, besides open authentication.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml
Sent from Cisco Technical Support iPhone App

Similar Messages

  • My calendar on my iPhone 4 erases all data over a month old except for recurring events.  How Do I get it to keep the info and not erase calendar events?

    My calendar on my iPhone 4 erases all data over a month old except for recurring events.  How Do I get it to keep the info and not erase calendar events?

    Settings>Mail, Contacts, Calendars>Calendars>Sync>All Events.
    Note: If you're using a work Exchange account, the administrator my have restricted your options for this setting.

  • How can i check my mails on the iphone and make sure that the mail wont pop up again on my computer ?

    How can i check my mails on the iphone and make sure that the mail wont pop up again on my computer/ will be deleted on the server ?

    For that kind of connectivity you need to be using an email account configured either as IMAP or Exchange.
    IMAP & Exchange accounts will maintain a sync across all your devices, so if you read / delete a message on your phone, it will disappear from the server as well. This cannot happen in POP email accounts.
    If your using gmail, instructions on how to set up exchange / imap are here http://www.google.com/support/mobile/bin/answer.py?answer=138740&topic=14252
    Alternatively, if its anything other than Google, you will need to contact your email providor or IT department (if your email address resides with an enterprise environment) to get the correct settings.
    Hope this helps!

  • HT4437 how can i use my labtop on the wed and watch everthing im doing on my tv

    how can i use my labtop on the wed and watch everthing im doing on my tv

    Mirror, if your MBP is early 2011 or later running OSX 10.8 or newer.  If older visit www.airparrot.com, a third party app that works OK, mixed reviews but mine works well.

  • How can i fix a clip when the video and audio are not matching up?

    How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

    I would try detaching the audio and the dragging the audio to the left or right until it lines up.

  • I need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by ste

    i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner

    Please post (a relevant section of) it right on this Forum.

  • How do we view a list of the temporary and free sites we are using?

    Adobe Web Host - Free Sites /
    How do we view a list of the temporary and free sites we are using?
    When logged into Creative Cloud we used to be able to see the temporary and hoe many of the 5 free sites we were using. 
    Can’t find a list on my Creative Cloud account or when linking to "Manage" from within Muse /
    No mention of the free sites in the FAQs. Has there been a policy change ? Are free sites still included in the Subscription ?
    // from - Adobe Muse Help | Adobe Muse / Common Questions //
    When I publish in Adobe Muse CC, do I have to pay for hosting with Adobe?
    Adobe Muse CC allows you to publish your temporary website on the Adobe hosting platform at no charge for a 30-day trial period. This gives you the opportunity to send a live URL to your client for review. All sites in trial mode with Adobe will include the domain “businesscatalyst.com” in it. If you decide to take the site live by paying for the monthly hosting, you can transfer your own domain and remove the businesscatalyst.com subdomain. Or you can export the HTML and host the final site with a hosting provider of your choice.

    Yeah, not sure why they took it out of the cloud interface.
    But if you go to http://www.businesscatalyst.com/partnerportal and login with your cloud ID you will have access to all your cloud sites and many other features.

  • I have all my CDs on my iPod, my old laptop crashed. How can I get my music to the cloud and/or my iPad

    I have all my CDs on my iPod, my old laptop crashed. How can I get my music to the cloud and/or my iPad

    Hi
    Thanks for the reply, not the answer I was hoping for, one last thing if I can get the music onto a computer can I then add it to the iTunes library.
    Really don't want to have to reload it all again

  • How do I get my Reminders on the iPad and iPhone to show up on my Mac laptop?

    How do I get my Reminders on the iPad and the iPhone to show up on my Mac Laptop?

    on your mac go to system preferences and login to iCloud. Ensure that reminders are also ticked so it can sync with you iPhone and ipad

  • How can I copy a part of the picture and paste this piece on top of another part of the same picture? ta

    How can I copy a part of the picture and paste this piece on top of another part of the same picture? ta

    select the section you want to copy (marquee tool or lasso tool) and either go to edit copy or use control c create a new layer in layers (top menu bar) or Control shift N and paste using control V;  or edit > paste.

  • SSHR reskin AKA 'How to Use Adobe Flash to Transform the Look and Feel...

    There was a presentation at the OHUG 2011 Conference titled 'How to Use Adobe Flash to Transform the Look and Feel of Oracle HR Self Service'. It presented a method of 're-skinning' SSHR to present a different UI to the user.
    Looking for anyone out there that has attempted to apply this to their Oracle HRSS pages. I know this company has developed (is developing?) a product based on this approach. I want to see if anyone has done it on their own and would be willing to share some details.
    Follow-up question. Has anyone availed themselves of the bespoke UI Development based on this approach from Applaud Solutions (as mentioned on their website), and care to comment on your experience?

    Any update on this please? Even we are looking for some pointers in this area.

  • How do I get page numbers on the left and right side of the page?

    I am finishing up a book in PAGES '08 on my Mac.
    How do I get page numbers on the left and right side of the page.
    I can get them on the page but I'd like them on the left and right sides.
    Evan

    If the icons are from dmg files that were used to install 3rd party apps like this one for VueScan
    Control (right) - click on the open dmg icon and select "Eject  xxxx" from the contextual window.
    Then find the actual dmg file associated with those icons
    and drag to the Trash in the Dock and empty.

  • [svn] 3037: Update flex-config. xml files used by the team and qa webapps to use the {targetPlayerMajorVersion} token instead of a hardcoded player version in the library-path and external-library-path .

    Revision: 3037
    Author: [email protected]
    Date: 2008-08-29 06:54:15 -0700 (Fri, 29 Aug 2008)
    Log Message:
    Update flex-config.xml files used by the team and qa webapps to use the {targetPlayerMajorVersion} token instead of a hardcoded player version in the library-path and external-library-path. This will allow the correct playerglobal.swc to be located when the target player version is set in the flex-config.xml or passed to mxmlc or compc.
    Modified Paths:
    blazeds/trunk/apps/team/WEB-INF/flex/flex-config.xml
    blazeds/trunk/qa/resources/config/flex-config.xml

    Unfortunately I don't have the
    "org.eclipse.swt.win32.win32.x86_3.1.2.jar" file. On my computer
    the folder is not set up the same way (C:\Program Files\Adobe\Flex
    Builder 2\plugins) instead it is set up as (C:\Program
    Files\Adobe\Flex Builder 2\metadata\plugins) but I've looked in
    everything and that file just isn't in there. I've re downloaded it
    twice. Still not there. Is there anything else i can do.

  • How would I be able to bring the GHz and memory up on an Air?  How can I make it badass?

    How would I be able to bring the GHz and memory up on an Air?  How can I make it badass?

    I should clarify a point ...
    Macbook Air solders memory onto the motherboard.  It cannot be upgraded.
    Macbook Pro has memory slots that allow SODIMMs (the memory cards) to be replaced, up to the limit of the motherboard.
    My 15 in MBP can upgrade to 16 GB.  But 16 GB for my machine is still $600 at cheapest.  I will be staying at 8 GB for a while.

  • How come every time i'm on the phone and another call enters I answer it but it doesnt tell me anywhere who is who on each line so i can go back and forth?? it only says multiple calls and i cant hang up the other line

    how come every time i'm on the phone and another call enters I answer it but it doesnt tell me anywhere who is who on each line so i can go back and forth?? it only says multiple calls and i cant hang up the other line.

    My carrier is Sprint. But I actually have checked with others and theirs work fine.

Maybe you are looking for

  • IPod Touch, 1st generation, can't use iTunes or the App Store

    I have an iPod Touch running iOS 3.1.3. All of a sudden, I can no longer buy music off iTunes or apps off the App Store because the "Install" or "Buy" buttons shrink to a very small size (see attached screenshot) and do not respond when pressed. I ha

  • Trust List 8.5 BE to 9.1

    Dears Currently we are running in 8.5 BE. i installed fresh 9.1 and exported all phones from 8.5 to 9.1 successfully. after rebooting the phones they are registering successfully to 9.1 but they are pulling the new load file of 9.1 they are still on

  • How can I run EJB Client in other computer ?

    Hello, I'm trying to run converter examples. if ejb client pgm resides on a same machine with j2ee server , it works fine. But when I put client pgm on a different maching below message show. No application client descriptors defined for: ConverterCl

  • ITunes was on XHD so I can't uninstall and reinstall. Help?

    Because of computer issues and losing a number of laptop hard drives within 2 years, I stored my iTunes on an external hard drive. I lost access to this hard drive due to a worn out proprietary cable and have not been successful in getting a new one

  • Help needed in formating the text using HTML tags in reports 10g

    Hi all, I have a situation here. We have an application which prints out Reports with a few lines of text in it. This text is entered by the user through our forms application in a field. That particular text is stored in each row of a particular lon