How to Config ESS & MSS
Hello Masters
Could u send a best Link on
Configuring ESS & MSS
Thanks
Hi,
1. Can SAP control ESS/MSS not to allow (to grey field approval ) user to change the approval fields?If yes, how to config this?
There are multiple ways to achieve this, you can achieve it through config or by personalizing the WD screen.
Easiest will be to personalize the Web Dynpro screen.
a. Preview the Leave request application through Content Administration.
b. Press Ctrl+Right Click on the approver field.
c. In the Personalization dialog select Read only.
2. Instead of default Head of org unit as approval, can I skipped it to the another superior higher than him/her.For example i'm in org A. Org A under Support dept. I want to to set default approval for staff 2 level org unit above him/her.
All the custom logic can be implemented by implementing the BADI
PT_GEN_REQ (as of Release 5.00)
BAdI: Control Processing Processes for Web Applications
PT_ABS_REQ (from Release 5.00)
Enhancements for Leave Request
3. For some leave ie Hosp leave, how to default approval to HR manager.
same as above
4.For project staff, can we put his supervisor as a approval.
same as above
5. I want to hide leave not to allow staff to see his mc balance only. How to config this.However, the staff stil apply via ess/mss to the approval.
I didn't understand the requirement. Can you please elaborate ?
Thanks
Prashant
Similar Messages
-
How to setup ESS/MSS ?
Dear Experts,
Could you please share with me step-by-step procedure on how to setup ESS/MSS in the functional side ?
Thanks very much,
AriefHai..
Check the ESS forum once...
SAP ERP HCM Employee Self-Service
Edited by: Ram Manohar on Jan 16, 2008 12:27 PM -
Hi,
This is bhargava.
How to use the ESS/MSS BP's under portal context.Hey Bhargava,
Be specific What is your exact requirement do you want the complete set of configuration of ESS/MSS on Portal EP 6.0 or EP 7.0, which will just installed the
Business Package on portal...
Download the following Business Packages from www.service.sap.com
1.ESS <patch number>-10002965.sca (here, ESS11p_2-10002965.sca)
2.MSS <patch number>-10002964.sca (here, MSS11p_2-10002964.sca)
3.PCUIGP<patch number>-20000568.sca (here PCUIGP011_0-20000568.sca)
Once you installed these package in portal via SDM you need to maintain the JCO
You have to maintain following JCo destinations for ESS and MSS.
Connection Name Logon Method
SAP_R3_Financials Ticket
SAP_R3_Financials_MetaData User/Password
SAP_R3_HumanResources Ticket
SAP_R3_HumanResources_MetaData User/Password
SAP_R3_SelfServiceGenerics Ticket
SAP_R3_SelfServiceGenerics_MetaData User/Password
SAP_R3_SelfServiceGenerics_MetaDataFIN User/Password
SAP_R3_SelfServiceGenericsFIN Ticket
SAP_R3_Travel Ticket
SAP_R3_Travel_MetaData User/Password
Under R/3
Creating a Role & User in HR system
you should be able to use the ESS applications (services), your employees require particular authorizations.
Log on to the SAP ECC system.
Run PFCG transaction (Role Maintenance).
Create copies of the composite role SAP_EMPLOYEE_ERP and all the single roles contained in it.
Creating User in Portal
Create ESSUSER in portal. (Same user as R3 User for SSO)
Assign Role to ESS User.
Select User Administration->Roles->Roles
Search the ESSUSER.
Select Following Roles and assign them to ESS User.
com.sap.pct.ess.employee_self_service
com.sap.pct.mss.manager (For MSS)
Login in to Portal with ESS User. Change the initial password u can get following screen.
If you want a complete step of installation document let me know...
Regards
Swapnil -
How to Integrate ESS/MSS to Webdynpro Application?
Hi All,
I am New to Webdynpros.
I Want to Develop Application on Webdynpro and integrate to ESS/MSS.
How to Start and what to do?
Plz Reply ASAP.
Thanks and Regards
KiranMost of the application in ESS have used the FPM (http://help.sap.com/saphelp_erp2005/helpdata/en/3f/20888224c544a2a01d9fe618902ae5/frameset.htm) to develop new self service applications.
You may start developing applications as described in the help link and then integrate it with ESS. You will have to maintain some setting under Homepage Framework in SPRO. There are plenty of threads describing this. Do search
Thanks,
GLM -
How to display ESS/MSS in different NW Portal
Hello Experts,
We are running ESS/MSS on a NW 6.0 portal. Now, we have a requirement to also display this ESS/MSS content on another portal which is running on NW 7.01 (we do not wish to install ESS/MSS on this server).
What is the best way to accomplish this? Could you please give me some advise and links to articles or blogs on the web that has step by step instructions? I searched around, but was unable to find anything related to this.
Thanks in advance for your help.
Regards,
AbuAccording to SAP's FPN's prerequisites and Version Interoperability guide
SAP NetWeaver consumer and producer portals should all be running SAP NetWeaver 7.0
SAPNetWeaver '04 is not supported.
Additional details: http://help.sap.com/saphelp_nw04s/helpdata/EN/45/76322bf0020dece10000000a11466f/frameset.htm
In fact there are issues if multiple SPS on NW7 are used (for instace producer is SP09 and consumer is SP11). Note 1005176 talks about patching some of the components to fix the issue.
So, FPN is out of the question. Has anyone done it using the Portals' URL or appIntegrator iView? -
Hi
I am a webdynpro (Java), I want to learn ESS / MSS, I have read the help.sap.com for ESS and MSS but I am not getting what exactly I will have to do as ESS MSS consultant from scratch. as it is already developed business pacakage.
Thanks in advanceHello,
I've inserted some date here in this Wiki that might help you with initial steps!
Please have a look in the following link.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erphcm/hcm+ess
Cheers,
Ricardo -
How to modify ESS/MSS iviews without NWDI
Hi Everybody,
The last couple of day's I have been searching the forums to find an answer to the above mentioned question. Is there a way to modify the ess/mss iviews without NWDI?
I have tried allmost anything I could think off... Unzip the files and import the files manualy into nwds etc...
After while I saw a posting that SCA files could be imported in the latest version of NWDS, I was able to import the SCA files of SAP into NWDS 7.1, but I am not able to create a project out of them. Probably this will also lead to issues when uploading the newly build sca files into portal 7.0.
Can anyone help me?
Thanks in advance.
Kind regards,
XanderHi Xander,
Some time ago I had the same question as you and as you I tried several things to load the SCA file to NWDS but after several tests it was loaded but without the screens.
I was able to create the project but it was missing many things when I tried to compile the project, the reason for this is that the ESS Package has a dependency in other SC as specified in the SAP Note 872892 - JDI/NWDI Cookbook for ESS/XSS (NWDI.zip File).
When you have all the dependencies (SCA files) it is a bout 700 MB which is a lot to load locally and figuring out exactly what you need will take a long time so at the end I could not use any trick to avoid the use NWDI as I only had to do 1 change to 1 DC ess/ca/padata so installing NWDI was an overhead for that only change, but at the end I have to do it.
I found the same posting as you and it seems NWDI 7.1 has the feature to do exactly what we needed.
But if you want to modify just the iviews as you are mentioning in your post you can do this straight in EP Content after copying your own content from the SAP standard content to do your modifications.
Best regards,
Juan Jose -
How to upgrade ESS/MSS SP7 to SP14
Hi Everyone,
we are using ESS1.0 SP 7, MSS1.0 SP 7 in EP 7.0 SP 10
Now i want to upgrade SP 7 to SP 14
can any one tell me stepwise how to upgrade to SP 14.
Thanks in Advance,
vv.Hi
the Procedure is like this.
Deploy the following Packags through SDM.
PCUI_GP600
ESS600
MSS600
BP for ESS
BP for MSS
While Deploying , Select Update any Version.
this is Update the Compoenets from Current Version to the
Required Version.
Cheers !
Regards
Rajendra -
How to Configure NWBC, ESS MSS
Dear Consultants,
Can anyone tell how to install ESS MSS servers in the present SAP Server, We want to use NWBC to use.
Naresh.KMHi Naresh,
With the limited information you provided, suggestion would be to check below documents to begin your ESS/MSS setup
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/108c31e7-b6a7-2d10-3692-c1a9f7a5c4dc?overridelayout=t…
How to Configure ESS and MSS in Portal..
Hope this helps.,
Regards,
Deepak Kori -
Hi Experts
How to map ESS & MSS roles to ECC 6.0 Roles in EP.
Say for example in ECC 6.0 we have a user A and User B.
User A have some addtional attributes and User B does not have it
How to map this two users in EP.
Thanks
Daya.
Edited by: daya damu on May 27, 2008 8:27 PMHi Daya,
You will have to do the user mapping,
It can be done in two ways,
1. Go to user administration and once you enter user A, you will have an option of "User mapping".
2. When you are logged onto the portal, click, personalize option and choose "User Mapping".
User mapping is basically done when the portal users and ECC users are different.
Let me know if you need any further clarification on the same.
Cheers,
Sandeep Tudumu -
Import ESS/MSS PACKAGE FOR MODIFICATION
hi everybody,
Anyone suggest me how TO download ESS/MSS applications from portaL AND import into NWDS AND MODIFY.
Thanks.
DeviHi Devi,
first you do this and follow jdi cookbook in note 872892
JDI has been installed
�� An Admin User which has access to all the JDI servers (DTR, CBS, CMS) has
been created and has been assigned necessary privileges (See Administration
manual in help portal for details).
�� The System Landscape Directory (SLD) has the new content (of the Software Components
delivered with this release).
��
3.2 Step by step process
3.2.1 Define a domain in CMS
Create a domain in CMS, as described in the help portal document at the following location:
http://help.sap.com/saphelp_nw04/helpdata/en/b9/086b4066d9bf49e10000000a1550b0/frames
et.htm
3.2.2 Create a new Track using the Landscape Configurator
Thanks,
gopal. -
how to configure ess/mss business packages
Hi Mariana
You would have the use the workflow and create a Portal role containing only UWL
Best wishes
Stuart -
BP ERP05 COMMON PARTS 1.0 required for ESS/MSS?
Is BP ERP05 COMMON PARTS 1.0 required for ESS/MSS 603? the link below talked about how to deploy ESS/MSS, it does not mentino BP for common parts
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=31476
but in the linke that talks about how to get rid of mismatch for ESS/MSS, it has BP for common part listed https://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES
I looked at online help for this BP, it says it is for system asministrators, but looks like it also have business functions listed in the iview. http://help.sap.com/erp2005_ehp_03/helpdata/EN/eb/bd8a42f802a01ae10000000a155106/frameset.htm
I'm confused - to use ESS/MSS 603, do I really need BP ERP05 COMMON PARTS 1.0?
Thanks,
Jane ZhouThe MSS business package uses objects from other business packages. These objects are listed in the Shared Objects in This Business Package section. If you want to use these objects, you must also implement the relevant business package.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/29/d7844205625551e10000000a1550b0/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c1/85b17cc78246258b85dd69af5ece17/frameset.htm
If you are planning to use any of the shared objects - then you will need the BP for Commom Parts as well.
Also, the BP for common parts connects different shared services between ESS and MSS - for you to be able to use both of them in conjunction.
Without installing the BP for common parts, some components might not work properly.
Hence It is recommended to install this BP along with ESS and MSS.
Hope that helps !!
Thanks,
Shanti -
ESS & MSS Roles,UWL,Authorization
Hi
How to get ESS & MSS User,UWL,user Authorization in ECC to portal
Thanks & Regards
Vijay.SSO Between Portal, Web Dynpro, and ABAP Systems
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e676ec90-0201-0010-cfa3-90b7c1291903
http://help.sap.com/saphelp_nw04/helpdata/en/89/6eb8e7af2f11d5993700508b6b8b11/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm
SAP Logon Ticket-based Single Sign-On
Please Go through This also,
http://help.sap.com/saphelp_nw2004s/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm
KotiReddy -
Hi,
We have implemented ESS/MSS and made some code changes.
Now we are planning to patch ESS/MSS .so I guess all the modification will go away.
So I created a new track and planning to move all the code changes from one track to the newly created track.
How can I do that.
Please let me know the solution
Points will be rewarded for the helpful answer
Thanks
Bala DuvvuriBala,
check the attachement NWDI.zip of note 872892. There's the process explained, how to patch ESS/MSS with NWDI.
kr, achim
Maybe you are looking for
-
Local and Export sale same excise invoice number range
Dear gurus, How to have Number range for Following same. Object- J_1IEXCLOC- Factory sale invoice Object - J_1IEXCEXP- Export Sales Invoice ie. 00000001-Factory sale invoice 00000002-Export sale invoice ie. Sales area is different for both Reg, A
-
Can I connect my I MAC 8.1 to a wireless modem like verizon mifi 4g using airport ?
I am thinking of buying a verizon 4G jetpack Mifi 4510L. I know it will work for my laptop. However my desktop I MAC 8.1, I'm not sure of, is there a way to connect using airport or will I need another devise?
-
Usage of sed question for experts
I need a little help with sed. Basically, I need to parse out selections from the output of hddtemp so conky can display some hdd temps for me. I have hddtemp in daemon mode so A simple 'nc localhost 7634' displays the following: $ nc localhost 763
-
Pre-loading the Cache from Database during application start-up
We are using Spring, Hibernate, Oracle Coherence 3.5.2 Weblogic Webservices Our requirement is to pre-load the cache during the application start-up most probably during Authentication/Authorization Service is invoked. We plan to load the data for ot
-
Soa suite on weblogic server 10.0??? URGENT!!!!!
hi, we have a requirement to use ejb3.0 in our project. we are using soa suite on weblogic server 9.2. but weblogic 9.2 is not supporting ejb3.0 ( i guess). so we want to migrate weblogic server form 9.2 to 10.0. my doubt,is Oracle soa suite 10.1.3.3