How to config helo in ims5.2

hi
how to config helo in ims5.2 and how to check the output of helo?
thanks

According to the SMTP protocol (from it's frist implementation RFC 821 - Aug. 1982, to the latest RFC 2821 - Apr 2001) , the HELO command is issued by a client to initiate a conversation with the server. Actually The HELO should be superseeded by the EHLO command but it's mantained for compatibility with earlier implementation as a fallback.
Anyway if you intend to configure your server to use only the HELO command when initiating a conversation with another server, you could use the keyword nohelo on the channel, but it's not standard; instead you could use the keyword checkehlo that tries to initiate the conversation with the standard ehlo command, and if it doesn't succede, then it falls back to the old helo mechanism.
give a look at the docs:
http://docs.sun.com/source/816-6020-10/mta_conf.htm#1067326

Similar Messages

How to config a new remote on apple tv (first generation). I have lost my remote which came with the apple tv

How to config a new remote on apple tv (first generation). I have lost my remote which came with the apple tv.

Do you mean you've replaced your remote and it wont work because your AppleTV is paired to your lost remote?
If so, http://support.apple.com/kb/HT1555 has you covered.

How to config OnDemand Report

Hi,
How to config OD Report if I want result display as below SQL command
select a.accountname,count(b.salestage),
(select count(b.salestage) from opportunity b where salestage in ('Closed/Did Nothing','Closed/Lost'))
from account a,opportunity b group by a.accountname
Thanks
Pae

if submit url with parameter
http://hostname:7778/reports/rwservlet?destype=PRINTER&desname=lpSZ_R02_2&report=sticker.out
error
REP-50159: Executed successfully but there were some errors when distribute the output
How to Solution?

How to config ZFS in solaris 10

hi,
I'm testing solaris 10 x86 edition in my PC. but i don't
find any information about how to config ZFS in 10 (X86).. ;-(
if anybody know it, pls.give me some information.
thanks a lot.

ZFS has not yet been integrated into Solaris 10...
At this time you need either the "Software Express for Solaris 2/06"
( http://www.sun.com/software/solaris/solaris-express/ ) or the
"Solaris Express: Community Release"
( http://www.opensolaris.org/os/downloads/on/ ) to play with ZFS.
.

How to config the telephony button in CRM 5.0 (win client)

Dear Sir,
I can't find the documents how to config the telephony button in CRM5.0 (win clicent). Please kindly advise.
Thank you and best regards,
Vimol

i can find the solution

How to config the web.xml file, when I use Richfaces + RI 1.2?

Hi there:
I want to use Richfaces + RI 1.2 to build a project. I don`t know how to config the web.xml file.
By the way, my web server is Tomcat 6.0, my JDK's version is 6u6. I don`t want to use the facelets.
thanks.
lxm

just add this before *</web-app>*
<context-param>
     <param-name>org.richfaces.SKIN</param-name>
     <param-value>blueSky</param-value>
</context-param>
<filter>
     <display-name>RichFaces Filter</display-name>
     <filter-name>richfaces</filter-name>
     <filter-class>org.ajax4jsf.Filter</filter-class>
</filter>
<filter-mapping>
     <filter-name>richfaces</filter-name>
     <servlet-name>Faces Servlet</servlet-name>
     <dispatcher>REQUEST</dispatcher>
     <dispatcher>FORWARD</dispatcher>
     <dispatcher>INCLUDE</dispatcher>
</filter-mapping>

How to config the font size of rich pod?

Hi,
Does anyone know how to config the font size of rich pod? It's too small.
Thanks!

You can do that using the PRINT-CONTROL Statement.This will only work when you send the list to the printer.Sample code is as below :
REPORT zfont NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
Start of print-control
NEW-PAGE PRINT ON.
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
SKIP.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
SKIP.
PRINT-CONTROL FUNCTION 'SF008'.
WRITE: / 'This is CPI 12'.
Depending on your SAP printer device, this may also work
PRINT-CONTROL FONT 1 LPI 6.
you can try to change font and LPI numbers
WRITE: / 'font 1 lpi 6'.
PRINT-CONTROL FONT 2 LPI 6.
WRITE: / 'font 2 lpi 6'.
PRINT-CONTROL FONT 3 LPI 6.
WRITE: / 'font 3 lpi 6'.
End of print-control
NEW-PAGE PRINT OFF.
*--- End of Program

How to config the user and role in the runtime for executing in the GP?....

Hi Experts,
I am learning GP(Guided processor)according the document
http://help.sap.com/saphelp_nw70/helpdata/en/44/0d5b8f250d5cfae10000000a155369/frameset.htmneed.
I meet two question when I learn the GP.
The first:
This document don't tell me how to config the member framework of the company. After I design the GP, I have to config the user and role in the runtime for executing. I hope I can use the WDA(webdynpro for java or webdynpro for java) to implement to config the user for executing in the runtime. Thus, the customer don't config the user when runing the GP. But I don't know how to do this.
I need a document guide step by step to tell me how to do this.
The second:
If I use the workflow in the GP, I have to install and config the NWDI(Netweaver Development Infrastructure). Now I have installed the NWDI, but I don't know config it so that I can download it to my machine for develop the workfolw in the GP.
Do you give me some hints? Thanks a lot.
Thank a lot.
Best regards,
tao

Hi, Mithu,
Thanks a lot for your help in advance.
I have carefully read the document: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6b66d7ea-0c01-0010-14af-b3ee523210b5.
Now, I think I have to set the processor of every actions in every process if I use the GP for processing the workflow.
I am better to hope that I can set the processor to the role for every actions in every process in the runtime through get the organizational structure in the WDA(webdynpro for java or webdynpro for java). Thus, the customer don't set the processor to the role for every action in every process when runing in the GP. I don't know how to do this.
Whether the function is not supported in the GP? If so, I have to config two organizational structure: in the R/3 and in the Portal. I don't think our customer don't receipt this solution.
Do you give me some hints? Thanks a lot. My email: [email protected]
Thanks again.
Thanks & Regards,
Tao

How to config SS7 in AS5300 connecting to PSTN

Hi,
AS5300----SS7 PSTN switch
How to config SS7 trunk in AS5300?
Thanks
yytellmey

AS5300 can only transport ss7 messages via ip to a device which supports ss7, it won't deal with ss7 directly. What you need perhaps is Cisco PGW2200, then you will be able to connect to ss7 through AS5300.
Check out this link:
http://www.cisco.com/application/pdf/en/us/guest/products/ps2027/c2001/ccmigration_09186a00800b4193.pdf

How to config status in Search in T-code : cic0

Dear All
We just upgrade from CRM 2.0c to CRM 5.0 . How to config status in Search in T-code : cic0, because the status in the Search transaction, is different from the Activity transaction . Please help.
Thank and best regards,
Vimol

Hi Vimol,
If you are talking about the custom search help, please follow the following steps to add a custom search criteria for CIC0.
        1. Run transaction SPRO.
        2. Click on SAP Reference IMG tab on application tool bar.
        3. Select Customer Relationship Management node.
        4. Select Interaction Center Winclient node.
        5. Select Component Configuration node.
        6. Select Visible Components node.
        7. Select Navigation Area node.
        8. Select Define search Profile IMG activity.
        9. Select the relevant Profile, and click on node view search application
             within the locator.
       10. Save the settings.
       11. Back to main tree.
       12. Select define search in locator IMG activity.
       13. Click on Search id node.
       14. Add the search id, text, function module, program name and screen in
             the table.
<b>Reward points if it helps.</b>

How to config varients in material master.

how to config varients in material master.

check this
http://help.sap.com/printdocu/core/Print46c/en/Data/pdf/LOVC/LOVC.pdf
http://www.sap-topjobs.com/VARCONFG%5B1%5D.pdf
http://www.sap-img.com/sap-sd/steps-for-sd-variant-configuration.htm
regards
KI

How i connect my forms/report with 9i database/ how i configer my form and

hi master;
i have 6i forms and 9i oracle database both are right but how i accece the 9i in my form and report.
which file i copy and where i copy .
please send me file name or how i configer my form and report with 9i
thanking you
Aamir

Dear Aamir,
Please copy TNSNAMES.ORA file from your Database Home/NETWORK/ADMIN directory and copy that in NETWORK/ADMIN directory where you installed Forms/Reports 6i. then you can connect to your server by using SID as host string like: system/manager@<SID example: ORCL>
Regards,
Reza

How to config sales as per receipt On transaction Date

Hi,
We are posting sale in SAP thru inbound idoc , when idoc is proceesed and documents are created it is accumulating in s120 table.
In s120 tables it is accumulating on weekly basis i.e Current Week + Document Year.
I want to save it on transaction date basis.
Pls let me know how to config it on Transaction date basis.
With Regards
Tausif Shaikh

Hi,
We are posting sale in SAP thru inbound idoc , when idoc is proceesed and documents are created it is accumulating in s120 table.
In s120 tables it is accumulating on weekly basis i.e Current Week + Document Year.
I want to save it on transaction date basis.
Pls let me know how to config it on Transaction date basis.
With Regards
Tausif Shaikh

How to config new plant in SAP MM. Steps required

how to config new plant in SAP MM. Steps required pls help

Hi,
1S pro---enterprise structure-definition -logistic general-define,check ,delete plant
here click on copy object icon
then copy your plant from stander plant or existing one
2and then define storage location if required
3then assign plant to company code
4if purchasing organization is there for your plant then assign plant to purchasing organization
Regards
kailas

Rest.items would not influence the payment days ,how to config?

Hello,everyone!
I have a question,you know the Rest.items would influence the payment days,how to config can avoid the influence?
Thank you!
Best regards
Doris

Dear Gladys,
Than you very much,i get it !
I can config "payment term from invoice" to realize!
Best regards
Doris
Edited by: doris feng on Apr 6, 2010 3:20 PM
Edited by: doris feng on Apr 6, 2010 3:22 PM

How to config helo in ims5.2

Similar Messages

Maybe you are looking for