How to config MediaSense to recording video when used video advantage with CIPT

I configured SIP Trunk between CUCM8.6 and MediaSense 8.5. And call between CIPT and 7975 both Video Capabilities is Enable.
Video Call is active fine but when play from Mediasense have only audio not video record.

i have iphone4 32gb.
my auto focus also not working.i was tried everthing but not work.
-restore firmware/ios = not working
-install super camera = not working
and lastly i've got the problem solved!
step 1:
open your default camera application and dont close it.
step 2:
flick the rear camera using your finger at the top side and the back side of the camera lens,
and that same time too try to tap your screen to help your camera to force/help/make auto focus function to work.
and now your camera + auto focus is working!!

Similar Messages

  • How do you update the Bios safely when using onboard RAID mirror? Z87-G45

    How do you update the Bios safely when using onboard RAID with Z87-G45?   I'm using a simple two drive, RAID 1 mirror setup.
    I'm currently at bios 1.4, and want to move up.  However, last time I upgraded the BIOS, the machine rebooted with improper settings for the RAID (they get hosed during BIOS flash) and Windows decided to auto-repair the only boot drive it could see, one half of the mirror, because it couldn't see the RAID array correctly and *POOF*  bare-metal reinstall required.   
    My PC will not let me press the DEL key on bootup to access the bios, even with MSI Fast Boot not installed.  It just ignores the DEL key and tries to load windows which, if that happens, will flame-out my RAID array after a bios flash if I can't catch it to enable the RAID first before windows loads.
    I do not want to rebuild my PC again simply because I do a BIOS update.

    FYI: BIOS 1.4 & 1.8 are using the same RAID version: 12.7.0.1936
    based on this RAID surprise should not hapends.
    But as pandaz says if you have no issues, leave bios update alone.
    there are still risks something to messed up,
    best do a backup of your data just in case if you want to try latest version

  • HT203200 How can i solve the -50 error when downloading video from itunes??

    How can I solve the -50 error when downloading video from itunes.   The apple support people cannot even figure it out!??

    The 2330 error often means some sort of damage to the filing system as might happen if the battery fell out while the disk was in use.
    Try running a disk check to see if it finds and fixes any errors.
    http://support.microsoft.com/?kbid=315265

  • I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.

    I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.  I have looked thru this forum and I don't see anyone else having this problem. (unless I missed it).  The recording works in Notes, but not when I open Webcam and try to record from there. video recording works fine. I have had this computer less than a month and I am having a couple of problems with it. Still loving it though.

    Hello schae731: Welcom to HP Forum and your new Touchsmart. You need to contact HP Direct Support on line your Touchsmart comes  with one year warranty so use it why you can. You can contact them through your HP Support Assistant or on line. They will help you with trouble shoot the web-cam software. Goto your computers model and make support web-site. They will also help you with your other issues as well.
             I am using the older version software so I won't be much help. Please repost if HP direct support is un able to help you resolve your issues. While you are chatting with them have them check out your computer do it before your 1 year warranty expires. Have fun with your new computer.

  • HT5105 How can you do picture in picture when you are working with a Multicam clip?

    How can you do picture in picture when you are working with a Multicam clip?

    Im doing a drumming music video and with the multi cam clip all the angles are nicely sync'd top the audio.
    Problem is if i want to have 3 angles on top of the main shot, im gonna have to re-sync them all to get them to line up manually. If i could use the multi cam clip they will already be aligned
    Thanks for trying to help appreciate, hoping someone has some multiclip knowledge and will be able to tell me if yay or nay.

  • How to set fetchsize of sql Query when using Database Adapter.

    Hi All,
    I am using DatabaseAdapter to connect to database and retriving huge amount of data.For improvement in the performance I want to set the "fetchsize" of sql query. I know fetchsize can be preset in Java using Jdbc 2.0 API.Please let me know how to set this value in BPEL when using DBAdapter?
    Thanks
    Chandra

    I talked to the developer of the db adapter - and he told me this feature will be available in BPEL PM 10.1.3 (which is supposed to be production later this year, and a public beta soon). If this is an emergency I would recommend going throug Oracle support and have them file an enhancement for 10.1.2.0.2
    hth clemens

  • I get sound no video when using AirPlay.  Any ideas?

    I get sound no video when using AirPlay.  Any ideas?

    Do you get an "HDCP error"?
    Since the last ATV software update, I have had  problems playing You Tube content from the iPad to the ATV using airplay, yet the same content from the You Tube channel on the ATV plays fine. I get the dreaded "HDCP error" which is nonsense, as YouTube content does not have this protection. Netflix also gives the same error. (I have posted seperately about this problem.)
    I have had a couple of years of fault-free playing with my setup, the only thing that has changed is the Apple ATV software. Ergo, they need to fix whatever bug they introduced. None of the recommended "fixes" have worked.

  • How much do I have to pay when buying an iPhone with 2-year contract? Carrier Plan- AT&T & Next

    How much do I have to pay when buying an iPhone with 2-year contract? Carrier Plan- AT&T & Next
    Thank You

    iosforever wrote:
    How much do I have to pay when buying an iPhone with 2-year contract? Carrier Plan- AT&T & Next
    Thank You
    You would probably find out the answer buy calling those carriers.

  • How to transfer range parameter from vb when using bapi calling

    Hi,everyone.how to transfer range parameter from vb when using BAPI calling?

    Did you get the solution to your problem?  Can you please share it with me. I have a similar problem. I have a VB program that calls RFC function. It works with a single parameter but not with a range of parameters. If you have the solution, could you please share sample codes with me? Thank you so much.

  • How can I show additional tab rows when using many open tabs?

    How can I show additional tab rows when using many open tabs?

    What method (code) did you use to get the Tab bar displaying in the space used for the Navigation Toolbar (location bar)?
    The Tab bar should be displayed above the Navigation Toolbar.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

    pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

    Problem is:
    Flash Player for IE11 (which is the worst browser ever developed - BAR NONE) is a Microsoft product, when it comes right down to it.
    Adobe writes the base code and yes, they do collaborate on updates for it, but the gang in Redmond alter the plug-in and add "proprietary" code before embedding it, and at that point it's "their baby".
    There are two (2) registry keys - 1 for 32 bit IE and the other for 64 bit IE, as well as a KB patch that prevent all but the most experienced Windows users from ever touching the Flash Player plug-in for IE. So there's NO WAY you could have done a clean install of the ActiveX plug-in in Windows 8. Unless you're an uber-geek, you can only update it through Windows Update.
    WIn 8 is an abomination and IE11 made it worse. IE has always been the "problem child" of browsers, failing to handle CSS, Javascript, some PHP and most design "tweaks" that good webmasters can use with other browsers, trouble free.
    I have IE8 on XP, 9 on VIsta, 11 on 7, 10 on 8 and 11 on 8.1... but they're all for testing only. I'd have to be out of my mind to ever think of using IE as my primary browser. ActiveX controls have to be disabled formost stuff and that opens millions of security holes in IE.
    You've got a good video card and a decent sound card. It's a shame to waste them on a pile of garbage like IE, just because it came with Windows.

  • How to avoid data repetation when using select statements with innerjoin

    how to avoid data repetation when using select statements with innerjoin.
    thanks in advance,
    satheesh

    you can use a query like this...
      SELECT DISTINCT
             frg~prc_group1                  "Product Group 1
             frg~prc_group2                  "Product Group 2
             frg~prc_group3                  "Product Group 3
             frg~prc_group4                  "Product Group 4
             frg~prc_group5                  "Product Group 5
             prc~product_id                  "Product ID
             txt~short_text                  "Product Description
    UP TO 10 ROWS
    INTO TABLE l_i_data
    FROM
    Joining CRMM_PR_SALESG and
    COMM_PR_FRG_ROD
    crmm_pr_salesg AS frg
    INNER JOIN comm_pr_frg_rod AS prd
    ON frgfrg_guid = prdfragment_guid
    Joining COMM_PRODUCT and
    COMM_PR_FRG_ROD
    INNER JOIN comm_product AS prc
    ON prdproduct_guid = prcproduct_guid
    Joining COMM_PRSHTEXT and
    COMM_PR_FRG_ROD
    INNER JOIN comm_prshtext AS txt
    ON prdproduct_guid = txtproduct_guid
    WHERE frg~prc_group1 IN r_zprc_group1
       AND frg~prc_group2 IN r_zprc_group2
       AND frg~prc_group3 IN r_zprc_group3
       AND frg~prc_group4 IN r_zprc_group4
       AND frg~prc_group5 IN r_zprc_group5.
    reward it it helps
    Edited by: Apan Kumar Motilal on Jun 24, 2008 1:57 PM

  • How do you stop needing to verify email password when using yahoo.att with Mac Mail

    How do you stop needing to verify email password when using yahoo.att with Mac Mail?

    Nevermind, I fixed it (I think).  I went into Settings | Accounts & Sync and found Yahoo at the bottom of the list (alphabetically).  I selected it and it had an optiion to delete the account, which I did.

  • How do images embeded in InDesign link when using Creative Cloud on more than two desktops?

    How do images embeded in InDesign link when using Creative Cloud on more than two desktops?

    If I am understanding your question correctly, you shouldn't have to worry about embedded images in InDesign. Once embedded, the image is stored within the file.
    If you are wondering about linked images... InDesign will follow the path on your computer and, if it does not find the image, you will recieve a notification. Edit: To prevent this, I would suggest packaging your file using File > Package... This will create a folder with all of your fonts and linked graphics so that you need not worry about broken links.  I just remembered that you cannot upload folders directly to Creative Cloud so a packaged folder wouldn't be very helpful unless you wanted to upload each file manually.
    The best solution I see right now is to either embed the graphics in the document, or upload the images with your document to relink.
    I hope this helped,
    Michael

  • Is there an adapter or something you can use on a iPhone 5 that will let you watch video when using an AUX cable?

    Is there an adapter or something you can use on a iPhone 5 that will let you watch video when using an AUX cable?

    if you by AUX mean composite or component then likely not as they would not be able to support a high enough resolution to do any type of airplay mirror
    hdmi should work though
    http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
    there is also the vga version but vga don't carry audio so it may not be that fun
    http://store.apple.com/us/product/MD825ZM/A/lightning-to-vga-adapter

Maybe you are looking for