How to config sg300 28 for vlan

i purchased 300-28
how it config for stp and trunk

Hi Jig, RSTP is on by default with default priority 32768 and port fast auto negotiates.
To create a vlan
configure terminal
vlan database
vlan 2
exit
To configure a trunk
configure terminal
interface gi1
switchport mode trunk
To add a vlan to the trunk as a tag memeber, making the port 1 untag, 2 tag
configure terminal
interface gi1
switchport trunk allowed vlan add 2
To change the native vlan of a port
configure terminal
interface gi1
switchport trunk native vlan 2
-Tom
Please mark answered for helpful posts

Similar Messages

Config view for VLAN config is not supported

Hi folks,
I have the following error when I try to view the VLAN config from RME->ConfigManagement->Version Tree.
"Config view for VLAN config is not supported"
I didn't found any information over the RME and Campus documentation.
Anybody know what kind of error I'm issuing
Thanks and Regards.
Leonardo

Hi Pablo,
The VLAN.dat file cannot be used to be deployed via CiscoWorks, but it can be done manually:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.3/user/guide/config.html#wp1311740
The problem with viewing the VLAN.dat contents in the config viewer or change audit reports is also mentioned in the link below:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.3/user/guide/chgaud.html#wp1060886
Look for the "Details" row and there you will see the following:
VLAN configurations cannot be compared because they are in binary format. In this case, the Details link will not be available and will be shown as NA.
Hope this helps!

How to config JSSE for UDDI4J???

Hi, i am using uddi4j to access uddi registries. As you know, when you use the publish api, it use the https connection.so we need to do some configurations for JSSE. I have downloaded JSSE,but i just don't know how to config it in the java.security file.please help,thanks:)

If you are using java 1.4 > JSSE is now included in the release and you shouldn't have to do anything.
If you are using an older JVM, you can also add the jsse.jar file into your classpath and register the appropriate provider implementation class:
System.setProperty("java.protocol.handler.pkgs",
"com.sun.net.ssl.internal.www.protocol");
java.security.Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
Or try googling the subject and look at links similar to the following:
http://www-128.ibm.com/developerworks/webservices/library/ws-uddi4j2.html
Cheers
Todd

How to config CDM for user Authorization

Hi Sir,
Can you tell me how to config CDM 4630 for user authorization with different privilege by using radius server
Regards

Here is a link on configuring user authentication on acns.
http://www.cisco.com/en/US/products/sw/conntsw/ps491/products_configuration_guide_chapter09186a008008123f.html
Not sure if there is one available for authorization too.

How to config OrgRule for check of equality

Hello,
We use GRC Compliance Calibrator V5.2. Our RuleSet also contains Risks based on organization levels.
We have a SOD-Risk (R006) made up of two functions (YK06 and YK08):
Risk Function     TCODE     Auth.Object     Field     Value from     Value to     Condition     Status
R006     YK06     F-42     S_TCODE     TCD     F-42                         AND          0
R006     YK06     F-42     F_BKPF_BUK     ACTVT     1          2          AND          0
R006     YK06     F-42     F_BKPF_BUK     BUKRS     $BUKRS                    AND          0
R006     YK08     F110     S_TCODE     TCD     F110                         AND          0
R006     YK08     F110     F_REGU_BUK     FBTCH     2          31          AND          0
R006     YK08     F110     F_REGU_BUK     BUKRS     $BUKRS                    AND          0
Risk R006 is only critical, if the two BUKRS in the definition are the same value.
A User with BUKRS = 1000 in F-42 / F_BKPF_BUK and with BUKRS = 1000, 2000 in F110 / F_REGU_BUK is critical.
A User with BUKRS = 1000 in F-42 / F_BKPF_BUK and with BUKRS = 2000 in F110 / F_REGU_BUK is not critical.
We feel that the following OrgRule-Definition does not cover the requirement:
OrgRule ID     Risk     Org Level     Value From     Value To     Search Type
OR-BUKRS     R006*     BUKRS          1000          1000          AND
OR-BUKRS     R006*     BUKRS          1000          1000          AND
Our question:
How must the OrgRule for Risk R006 be defined in order to flag only Users with identical BUKRS as critical?
Thank you very much,
Jürgen Holtz

Hello Mr Alpesh,
thank you for refering me to the Quick Reference Guide "Organizational Rules and Organizational Level Reportingu201D. I am aware of this document and have followed it.
However, it does not exactly address my problem as the document explains how to set up OrgRules that cover two different OrgLevels (eg. BUKRS and WERKS).
In my case, I have a single OrgLevel.
However, I have found out that a single-line OrgRule solves my issue.
It is the following OrgRule:
OrgRule ID     Risk     Org Level     Value From     Value To     Search Type
OR-BUKRS     R006*     BUKRS          1000          1000          AND
Again, thank you for your input.
I close this posting as this question is now solved for me.
Best regards,
Jürgen Holtz

How to config NACE for printing debit memo request ?

hi,
I've tried to config with the transaction NACE for SAtype GV ( debit memo request )
In SPRO in config :
GV Deb.MemoReq. f.Ctrct V10000 Order Output ZBA0
but then I used the transaction VA02 to print document header, The status is always in yello ( not processed ) , I do not know why , could you please help me ?
Thanks

hi,
I used Analyse determination and it show me that :
The "output not found" Access 10, message 450.
and the description:
Diagnosis
No valid output conditions found for the application object.
System Response
For this reason no output proposal was created.
Procedure
Execute function
I do not know the reason why . This is for printing a billing request ( GV)

How to config SSL for stand alone ITS

Hi,
I need help configuring SSL for ITS. Please let me know if smebody has the documentation. W ealso use EP6 Sp02 portal.
Thanks,
Srini

Hello Jeremy,
There is a document describing the parameters: ITS_Service_Parameters.pdf
You can find the online descriptions at:
http://help.sap.com/saphelp_nw04/helpdata/en/1f/ef243a84da356be10000000a11402f/frameset.htm
The not so common ones are only listed, you have to search for notes on those parameters.
~host/port(un)secure are used to switch protocols, say I access the ITS over https on service "A":
https://host/scripts/wgate/A!
In the template I want to switch to non secure service B.
http://host:8080/scripts/wgate/B!
The Agate does not have enough info to generate the full URL from the info it gets outof the first request; how should it know that the non-secure is running at port 8080.
Therefore you need to define these values (n.b. on the same machine one can also have different hostnames for http and https access)
Some controls in ITS also generate full URLs and rely on these parameters being set.
If you have multiple wgates from different domains to one agate then you cannot live with the 1-1 Situation and you have to overwrite the headers at the wgate side (note 744768).
Regard,
Fekke

Costing variant , how to config rounding for component quants ?

Hello everyone ,
i am new to CO-PC
my user want to change rounding for component quants.
Current setting is u2018Round up with Nondimensional units of Measureu2019.
This affects too high loss in standard product cost due to rounding up.
For instance, 24 pieces of product are packed in one shipping carton.
Based on standard cost calculation per 100 pieces,
shipping carton usage is computed as roundup of (100/24) which is 5 pieces.
Once in the actual production, production lot size is 10,000 pcs.
Target shipping carton usage would be automatically calculated as (5*24,000/100) = 1,200 pcs
whereas in the reality, 1,000 shipping carton should be used (24,000/24).
As a result, material usage variance is shown too high due to rounding up.
you can see detail in below website (there is only picture in website)
[http://picturepush.com/public/4467052]
thank you in advance.

Hi
I dont think this behaviour can be changed....
There is a workaround though, in acordance with SAP recommendations
Increase your costing lot size to 10,000 or 1000 or as much as reasonably possible... Also, increase your Price Unit and keep it same as Costing Lot Size....
For Existing Material Masters: Go to T code MM17 and change MARC-LOSGR (Costing Lot Size) and MBEW-PEINH (Price Unit)....You can change in mass mode
For New Material Masters: Using BADI MATERIAL_REFERENCE, you can default the costing lot size and price unit as 10000 or 1000 as desired
Regards
Ajay M

How to config SAF for searching in CRM

Dear Sir,
I would like to configure SAF for seach the Knowledge search in CRM, Do you have any step or manual ??
Thank you and best regards,
Vimol

i can find the solution

Config Setps for Trex in CRM 5.0

Hi All,
How to config Trex for CRM5.0 ?
Thanks,
Nagesh

Hi Rao,
I am mailing u a doc for TREX post Installation configuration.
Im sure it will help u.
Reagrds,
Sumit

SG300's vlan isolation except for shared printers

Hello,
We have 2 x SG300-20's and 1 x SG300-10.
We want to have a few vlans to isolate different departments from each other while still providing access to the broadband uplink as well as shared printers.
The setup we would like would be something like this:
1 x SG300-20 for VLAN 2
1 x SG300-20 for VLAN 3
1 x SG300-10 for VLAN 4-6
Shared printer(s) on VLAN 6 which should be accessible from all other vlans
We also have a RV180 router sitting in front of the switches which should provide broadband uplink access and trunking for the switches.
We need to forbid vlan 2-5 from communicating with each other.
In order to simplify and test, we are using the SG300-10 switch only in L3 mode at the moment with 3 computers to simulate 3 vlans but it seems to turn on inter-vlan routing on every port and vlan automatically when you set the switch in L3 mode and in L2 mode, vlan isolation works but we need to use the router to serve up dhcp and inter-vlan routing on a single vlan, which after over 6 hours of having the cisco tech logged into our system to try to set it up he gave up and said he didn't understand why it was not working...
Is there a way to use this setup, or something simillar?
We have contacted cisco support a second time and have had a tech test our switch config file for a week now and still no progress on this and we need to have this working asap.
We were told that this was possible with our equipment but it seems there are serious limitations with this gear that even the cisco techs don't know about...
We can provide the switch config upon request.
Thanks!

Hi Tom,
I replaced the cisco RV180 with a netgear FVS318N and so far, in the lab anyways, I've gotten the setup the following setup to work:
SG300-10 in layer 3 mode:
Port 1 - Admin Port - Vlan 1 pvid
Port 2 - general - VLAN 2 pvid - tagged vlan 4 - forbid vlan 3 - dhcp 192.168.2.0/24 (iface 192.168.2.203)
Port 3 - general - VLAN 3 pvid - tagged vlan 4 - forbid vlan 2 - dhcp 192.168.3.0/24 (iface 192.168.3.203)
Port 4 - general - VLAN 4 - Tagged vlan 2 - Tagged vlan 3 - dhcp 192.168.4.0/24 (iface 192.168.4.203)
Port 10 - Trunk - pvid vlan 1 - Tagged 2-3-4 - (iface 192.168.254.203)
Routes:
Added default gateway to vlan 1 iface on router
Added 192.168.1.0/24 gateway vlan 1 iface router ip (lab's upstream router is on that block which doesn't have an iface on the switch)
IPV4 ACL:
Port 2 - priority 500 - Deny any to vlan 3 subnet
priority 1000 - permit any to any
Port 3 - priority 500 - Deny any to vlan 2 subnet
priority 1000 - permit any to any
On the netgear router, vanilla config with the 4 vlans added to it and inter-vlan routing enabled with switch port 10 plugged into router port 7 for uplink.
So far it seems to be working correctly, still need to test vlan hopping and static ip's and routing to simulate mis-configured or malicious computers plugged into the two main vlans but replacing the router seems to have done the job.
Perhaps further testing would of resulted in a working setup with the RV180 but after so many hours wasted on this setup by us and by the cisco tech, it was time to make a move.
What's your opinion on this setup Tom?
I'm so tired I'm getting cross-eyed and might be forgetting something important.
Thanks!

How can i cancel a password i set in the html config utility for laserjet p1102w under mac osx 10.6?

After setting a password in the Networking tab of the HTML Config Utility for HP Laserjet P1102w under MAC OSx 10.6, I cannot access either the settings or the Networking tabs again. How can I access them or just cancel the password I set?

hi,
I beleive your question has been answered in a different post
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Reset-the-admin-password-on-the-web-pag...
hope this helps
Russ@HP
Say thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution
(Although I am employed by HP, I am speaking for myself and not for HP)
+++++++++++++++++++++++++++++++++++++++++++++++++++++++

How to config the user and role in the runtime for executing in the GP?....

Hi Experts,
I am learning GP(Guided processor)according the document
http://help.sap.com/saphelp_nw70/helpdata/en/44/0d5b8f250d5cfae10000000a155369/frameset.htmneed.
I meet two question when I learn the GP.
The first:
This document don't tell me how to config the member framework of the company. After I design the GP, I have to config the user and role in the runtime for executing. I hope I can use the WDA(webdynpro for java or webdynpro for java) to implement to config the user for executing in the runtime. Thus, the customer don't config the user when runing the GP. But I don't know how to do this.
I need a document guide step by step to tell me how to do this.
The second:
If I use the workflow in the GP, I have to install and config the NWDI(Netweaver Development Infrastructure). Now I have installed the NWDI, but I don't know config it so that I can download it to my machine for develop the workfolw in the GP.
Do you give me some hints? Thanks a lot.
Thank a lot.
Best regards,
tao

Hi, Mithu,
Thanks a lot for your help in advance.
I have carefully read the document: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6b66d7ea-0c01-0010-14af-b3ee523210b5.
Now, I think I have to set the processor of every actions in every process if I use the GP for processing the workflow.
I am better to hope that I can set the processor to the role for every actions in every process in the runtime through get the organizational structure in the WDA(webdynpro for java or webdynpro for java). Thus, the customer don't set the processor to the role for every action in every process when runing in the GP. I don't know how to do this.
Whether the function is not supported in the GP? If so, I have to config two organizational structure: in the R/3 and in the Portal. I don't think our customer don't receipt this solution.
Do you give me some hints? Thanks a lot. My email: [email protected]
Thanks again.
Thanks & Regards,
Tao

How to config receiver http adapter for HTTP POST without XML tags ??

Hi All,
Can you please provide some infornation on How to config receiver http adapter for HTTP POST (Request) without XML tags ?? Our receiving product doesn't support XML formats.
Is there any option to bypass server authentication on the XI?
If anybody has the same experience or know how to please provide inputs.
Thanx
Navin

Hi,
you can use xsl mapping for this in which u xtract
the contents only but not the xml tag.
Ranjit

How to config a shared cache for multiple environments with C API

How to config a shared cache for multiple environments with C API? Just like Java edition. Chapter 2. Database Environments
I want to open large number of databases, at least 10,000. But as the counts of databases opened increase, the db->open operation become very slow. It almost cost 2 hours to 10,000 databases.
So I try to distribute these databases to multiple environments ( for example, 5 envs ). And in order to improve the efficient of memory use, I want to share cache between envs.

Hi,
It is not clear what you meaning about multiple environments. Do you mean these environments are in different directories or in the same directory ? If you mean environments in different dirs share the same cache, it is interesting why you need that.
If you do not use DB_PRIVATE to open the environment, the created cache will be on disk, in the environment directory, so it can be shared by multiple processes and multiple threads. Currently, the cache file is in the environment directory, and we do not support specifying a separate directory for cache only.
Regards,
Oracle Berkeley DB.

How to config sg300 28 for vlan

Similar Messages

Maybe you are looking for