How to config. structure indicator for sap pm

Hi Exports, Can any body share how to config. the structure indicator of sap pm with shreen shot and explanation. Best Rajeev

Rajeev,
Tcode OIPK
or
IMG path below
Click on New Entries.
Create your own Structure indicator as shown below.
Hope this info is helpful.
Jogeswara Rao K

Similar Messages

  • How to config new plant in SAP MM. Steps required

    how to config new plant in SAP MM. Steps required pls help

    Hi,
    1S pro---enterprise structure-definition -logistic general-define,check ,delete plant
    here click on copy object icon
    then copy your plant from stander plant or existing one
    2and then define storage location if required
    3then assign plant to company code
    4if purchasing organization is there for your plant then assign plant to purchasing organization
    Regards
    kailas

  • How to know print program for SAP Script

    Hi friends,
    how to know print program for SAP Script form name ?

    Hi ,
      You can use the following code changes in the layout & see..
    You have to create a program Z_BC460_EX4_HF for that..
    /:PERFORM GET_NAME IN PROGRAM Z_BC460_EX4_HF
    /:  USING &CUST&
    /:  CHANGING &NAME&
    /:ENDPERFORM.
    Dear &NAME&
    The ABAP routine could be defined as follows:
    IMPORTANT: The structure itcsy must be used for the parameters.
    REPORT Z_HENRIKF_SCRIPT_FORM .
      tables scustom.
      form get_name tables in_tab structure itcsy
                           out_tab structure itcsy.
      read table in_tab index 1.
      select single * from scustom
        where id = in_tab-value.
      if sy-subrc = 0.
        read table out_tab index 1.
        move scustom-name to out_tab-value.
        modify out_tab index sy-tabix.
      else.
        read table out_tab index 1.
        move 'No name' to out_tab-value.
        modify out_tab index sy-tabix.
      endif.
    You could also fill the ouput parameter table this way
       READ TABLE out_par WITH KEY 'NAME1'.
       out_par-value = l_name1.
       MODIFY out_par INDEX sy-tabix.
    endform.

  • How to create Charge indicator for Bank account

    Dear SAP Gurus,
    Please advice how to create charge indicator for bank account under - Set Up Bank Determination for Payment Transactions - activity in automatic outgoing payment configuration.
    There is no customizing option in F1 help option. I also try to search in IMG there is also no link for the same.
    Early reply would be appreciated.
    Regards,
    Prafful Kansal
    9910432881

    Dear,
    Charge Indicator is freely definable field, you can put any value you want.....
    Regards
    Chintan Joshi

  • How to apply Structural Authorisations for Report

    Hi All,
    We are using structural authorisations in our project and it is working fine for all processes. But we are facing problem for reports.
    Kindly guide on How to apply structural authorisations to SAP Standard Reports and Custom reports.
    Thanks & Regards,
    Prashant

    Hi Prashant,
    Yeah LDB is a good way of implementing Structural auth. Apart from that you can assign the Authorization Group in the Z-report attribute. So users who are part of this group only can access this report. This also applies to the standard reports as they are already assgned to standard Authorization Groups.
    Br/Manas

  • How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?

    Hi,
    How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?
    I tried with acual method as below from client '000':
    DELETE FROM USR02 CLIENT SPECIIED WHERE BNAME = 'SAP*' AND MANDT = '001'.
    After this when I tried to logon '001' using SAP* with password PASS it is giving  the message that Incorrect logon and password.
    (Also when I checked for 'SAP*' in 001 it looks like it is not got created as I queried as below:
    SELECT SINGLE * FROM USR02 CLIENT SPECIFIED WHERE BNAME = 'SAP*' AND MANDT = '001'.)
    Can anybody throw some light on this? RewardS is guranteed for solutions!
    -B S B

    Hi again:
    I forget to tell.
    You must restart the system. So, that a new user with the name "sap*" gets generated with password "pass"
    Hope this wil help,
    Eric

  • How remove Special stock indicator for dialog in PO componet overview

    Hi
    I am creating production order with reference to the sales order (MTO) after creating the production order in component overview special stock indicator is default value is u20181u2019, plz any one suggest How remove Special stock indicator for dialog display in production order component over view, I have already maintained in MRP 4 Dependent requirements ind. for individual and coll. Reqmts as u20182u2019
    Thanks
    Mohan M

    Did you maintain the indiv/ coll indicator as 2 after the creation of planned order / production order? If yes, then re-create the order & then check.
    If not, then check in BOM Item details if you have maintained them to be as individual.
    Check & revert.

  • How to create OSS note for SAP?

    Hi,
    How do I create OSS for SAP? Any step by step or notes related?
    appreciate your help!!!!!!
    Thanks,

    Hi Afi,
    If you are looking for creating an oss message with SAP  follow the path
    http://service.sap.com/notes --> Report a Product Error --> select your system --> Enter the search term ( related to your issue)  and componenet ( if its basis BC , change management BC-CTC , if its for solution manager use SV-SMG or the sub component )
    Now it will show the related oss notes and if that notes are not helpful you can create a message with SAP by clicking create message.
    Thanks
    Prince Jose

  • How to setup Data guard for SAP database?

    Can someone please tell me how to setup data guard for SAP databases?
    Thanks,
    Abhi

    Hi Abhi,
    have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
    14
    Oracle Data Guard
    You can use "Physical Standby".
    You cannot use "Logical Standby".
    You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
    You can use Data Guard Broker.
    You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
    In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
    Maximum Protection causes the primary database to terminate if problems occur in the standby database.
    And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
    Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
    regards
    Kay

  • How to config work flow for approval in snp?

    Dear Expert,
    we want to running TLB for deployment stock orders which are approved by leaders.
    please tell us how to config work flow for approval in snp?
    thanks so much

    Hi,
    I got to know from DB49 that some workflow is available in GATP, but as far as I know, there is no such possibility in SNP.
    Deployment stock transfer kind of data exists in livecache order series, and it's very tough to manipulate it in some way to suit the approval workflow.
    As far as I can propose, you would need to do following (big custom development):
    1) Create a custom transaction
    2) Read Deployment Stock transfer data in accordance with your selection criteria and display it to the relevant user/approver
    3) User would accept/reject the Deployment Stock Transfer. This action is possible in a custom transaction.
    4) If Deployment Stock transfer is rejected, delete it from livecache
    5) Now when you run TLB, only approved Deployment Stock Transfer would be available to be coverted to STOs.
    In the above development, you could create logs/reports as you need for audit kind of purpose.
    This won't be a very simple development, but it's possible.
    May be someone could give you some better alternative.
    Thanks - Pawan

  • How to set Actual indicator for Business Process

    Hi,
    Can anybody tell me as "how to set Actual indicator for Business Process " in Activity Based Costing.
    Regds,
    Bijay

    ok

  • How can I install attachments for SAP notes with zip-files ???

    How can I install attachments for SAP notes with zip-files ???

    Can you elaborate on your question? How exactly is your question related to SAP NetWeaver Portal: Application Integration? If you are really asking how to install attachments contained in SAP notes, there is no automatic/general way and you should ask your question in the Software Support and Maintenance space to begin with. What SAP note(s) are you looking at installing?

  • How to default Invoice indicator for these

    How to default Invoice indicator for these
    limit items
    Long Text
    Export/Import funcationlaity from the
    Purchase order.
    1.Craete a shopping cart with Limit
    item
    2.Give the "value Limit" to 1 Penny(0.01)
    3.Order the Shopping
    art
    4.The shopping cart is approved and orderd
    5.Navigate to the "Related
    document" tab from the Shopping cart screen
    6.Click on Purchase order
    Number
    7.Click on "Export"Button from the PO Screen
    8.Save the Exported
    file in to Local drive
    9.Now Edit the file which is saved((Add few more line
    items)
    10.Now come to PO screen amd click on Edit button
    11. Click on
    "Import" Button from the PO screen
    12.Click on Browse from the Pop up window
    and click on Upload button.
    13.Now check the Imported items from the "Item
    Overview"section-
    Bottom
    Line is:Limit items are getting created in the System using the
    upload file
    but it does not update the GR based Invoice indicator flag
    for all the items
    uploaded.due to which it errors out.

    Hi,
    I have created a shopping cart and order it,
    I will open the SC and navigate to the Related tab and click on PO document number.
    Now click on Export button(It will export to ur Local desktop) on Po screen
    Now update Exported file(add few more Limit items)
    Click Edit button from PO screen.
    Import button will be enabled.
    Click on Import button to upload the File.
    Verify the limit items are added to the item overview section.
    Now all the Limit items are added but system gives error messages.
    Error message below:
    "Check confirmation-Based Invoice Verification for services and   Limits."
    This is the error message for all the Line items, so We need to default this flag.

  • How you complete impact analysis for SAP Universe

    hi,
    i want to know that how to how you complete impact analysis for SAP Universe

    EdPC-SCB,
    have you tried enabling auditing?
    - Yes, audit log only shows user's activities which isn't useful for us. Please let us know any audit log that might be helpful .
    For most of the servers listed in the CMC there is an "Audit" tab.  I'd say if you have the disk space in your database for Auditor available, then if in doubt turn it on (at least for a while) to see if it exposes what you are seeking to find out --that'd be the quickest way.  The documentation (xir2_bip_auditor_en.pdf) doesn't offer much in helping you to see a correlation between ticking on an Audit option in a Server and how it will populate in the Auditor DB -- most of us just hunt and peck until we get what we want.  Once you have the good stuff in each of the Servers ticked on you'll be able to track down which report recieves which object.  To help youself out initially, you should run every report that you can find so Auditor will get seeded.
    thanks,
    John

  • How to print double sided for SAP without exporting

    Hi Friends,
    Could you explain me that how to print double sided for SAP without exporting? Thanx.

    Hi,
    As per your query this is printer facility not to SAP. You have to define your printer in double printing by default and get all the printout both side from any software like SAP,Excel,Word etc.
    Anil

Maybe you are looking for