How to config TTY type

Hallo,
during my installation I had 132 chars or so on my TTY.
Installing the nvidia server switched this to 80.
How can I change the TTY setting back to more chars, maybe even coloured?
Thanks

Nvidia proprietary drivers don't use KMS which results in lower screen resolution and thus, fewer characters.
You can use the fbset tool to adjust console resolution.
Colors have nothing to do with this, they depend on the application that is printing to the screen.

Similar Messages

  • How to config movement type 261?

    Hi, all,
    My process GI to production is as follows,
    1. Stage material from a storage bin to 914
    2. Issue material from 914 to production with MB1A/261(movement type)
    My question is: when I finished the MB1A/261, the system also generated a TR which I wouldn't deal with any more concurrently, so there're lots of such TRs stacked in the system as time goes by...How can I config the movement type 261 to fulfil this purpose?
    Thanks
    Michael

    Hi,
    Try MIGO with Goods iusse and order option processing with your order number.
    In the WM tab there is an icon for " No Transfer Requirement". Try out this option.
    Regards,
    DilliB

  • What is the table to config Data Types in BI modeling

    Hi Friends
    I got a problem while assigning data types to info objects, It has't got all data types in their fields, i have to assign NUMC data type  to assign EE ID
    and assign different Data Types to different IO, will you please explain me how to config data types?
    Thanks & Regards
    Srinivas

    Hi,
    If the data types provide by SAP doesn't meet your requirement then you need to create a custom domain by copying the existing one and assign it to the key figure.
    Go through the below document for step by step procedure:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/209b2916-1cca-2d10-b39e-90df259764ef?QuickLink=index&overridelayout=true
    Regards,
    Vijay

  • How to Config PR One Order Type, Different Plant, Different Number in ME51N

    For Example:PR order Type is NB,may have  plant 1000 or 1100,If PR plant is 1000,then current PR number is :u201948XXXu2019,IF PR plant is 1100,then PR number is :u201951XXXXu2019
    How to Config it or which user-exits(BADI) can control it
    My issue is  not config different order type to solved this case.

    Hi,
    Unfortunately, this is not what SAP was designed.  The reason was that plant location is defined at item level while the PR number range is defined at the header level.  How would you like your PR document to be numbered in case PR is created for both plant 1000 and 1100?
    Cheers,
    HT

  • How to config the Default Values in IT 2006

    Dear Gurus,
                      My Client requirement is if i create Absence quota they want default quotas values
    eg PL= 40
         CL=7
         SL=5
    Then how to config the Default Values in IT 2006
    Other wise where i have to assign in Quotas limit
    Please advised
    Regards
    MHPO

    Configure ur Absence Quotas with Selection group and assign the value of that selection group in Quomo
    and run  RPTQTA00
    Time Data Personnel Time Management IMG   Managing Time Accounts Using Attendance/AbsenceRecording and Administration   Define Absence Quota Types. Time Quota Types Quotas
    PersonnelIMG   Managing Time Time Data Recording and Administration Time Management   Calculating Absence Entitlements Accounts Using Attendance/Absence Quotas   Permit Quota Generation Without TimeAutomatic Accrual of Absence Quotas  Evaluation.
    Time Time Evaluation  Personnel Time Management IMG   Set Personnel Subarea Groupings for Time Recording.Evaluation Settings
    PersIMG  Time Data Recording and Administration onnel Time Management   Calculating AbsenceManaging Time Accounts Using Attendance/Absence Quotas   Set Base Entitlements  Rules for Generating Absence Quotas Entitlements  Base Entitlement for Absence Quota Generation.
    Personnel TimeIMG   Managing Time Accounts Time Data Recording and Administration Management   Rules for Calculating Absence Entitlements Using Attendance/Absence Quotas   Determine Validity and Deduction Periods.Generating Absence Quotas
    IMG  Managing Time Data Recording and Administration  Personnel Time Management   Calculating Absence EntitlementsTime Accounts Using Attendance/Absence Quotas   Define Set Base Entitlements  Rules for Generating Absence Quotas  Generation Rules for Quota Selection.
    Define Public Holiday Work Schedules  Personnel Time Management IMG  Classes
    Personnel Work Schedules  Personnel Time Management IMG   Group Personnel Subareas for the Work ScheduleSubarea Groupings
    IMG   Group Personnel Subarea Groupings  Work Schedules Personnel Time Management  Personnel Subareas for theDaily Work Schedule
     Daily Work Schedules  Work Schedules  Personnel Time Management IMG  Define Daily Work Schedules
    Work Personnel Time Management IMG   Define Period Work Schedules. Period Work Schedules Schedules
    IMG   Define Day Day Types  Work Schedules Personnel Time Management  Types.
     Day Types  Work Schedules  Personnel Time Management IMG  Define Day Types.
    Day Work Schedules  Personnel Time Management IMG   Define Special Days.Types
    Work Personnel Time Management IMG   Define Employee Subgroup Work Schedule Rules and Work Schedules Schedules  Groupings
    Work Work Schedules  Personnel Time Management IMG   Define Groupings for the Public HolidaySchedule Rules and Work Schedules  Calendar.
    Work Work Schedules  Personnel Time Management IMG   Set Work Schedule Rules and WorkSchedule Rules and Work Schedules  Schedules.
    Work Work Schedules  Personnel Time Management IMG   Generate Work Schedules ManuallySchedule Rules and Work Schedules
    IMG  Set Planned Working Time  Work Schedules  Personnel Time Management  Default Value for the Work Schedule.
     Personnel Time Management IMG   Set Default Value for Time Management Planned Working Time Work Schedules  Status.
    Time Data Recording and Personnel Time Management IMG   Define Personnel Subareas for Substitution Substitutions Administration  Types.
    Time Data Recording and Personnel Time Management IMG   Set Defaults for Substitution Types. Substitutions Administration
    IMG  Absences Time Data Recording and Administration  Personnel Time Management   Group Personnel Subareas for Attendances and Absence Catalog  Absences.
    Time Data Recording and Personnel Time Management IMG   Define Absence Types. Absence Catalog  Absences Administration
    IMG   Absences  Time Data Recording and Administration Personnel Time Management   Define Counting Classes for the Period Work Absence Counting Absence Catalog  Schedule.
    Time Data Recording and Personnel Time Management IMG   Rules for Absence Counting  Absence Catalog  Absences Administration   Group Employee Subgroups for Time Quotas.Absence Counting (New)
    IMG   Absences  Time Data Recording and Administration Personnel Time Management   Group Rules for Absence Counting (New)  Absence Counting Absence Catalog  Personnel Subareas for Time Quotas
    Time Personnel Time Management IMG   Absence Absence Catalog  Absences Data Recording and Administration   Define Rules for Rounding Counted Rules for Absence Counting (New) Counting  Absences
    Time Data Recording and Personnel Time Management IMG   Rules for Absence Counting  Absence Catalog  Absences Administration   Define Counting RulesAbsence Counting (New)
    Personnel TimeIMG   Absence Catalog Absences  Time Data Recording and Administration Management   Define Counting Rules  Rules for Absence Counting (New)  Absence Counting  Deduction rules for Absence quotas
    Time Personnel Time Management IMG   Absence Absence Catalog  Absences Data Recording and Administration   Assign Counting Rules to Absence Types.Counting
    Personnel TimeIMG   Attendances/Actual Working Time Data Recording and Administration Management   Define Attendance Types.Times
    Time Personnel Time Management IMG   Attendances/Actual Working Times Data Recording and Administration   Assign Counting Rules for Attendance counting (New) Attendance counting  Rules to Attendance Types.
    Time Data Personnel Time Management IMG   Managing Time Accounts Using Attendance/AbsenceRecording and Administration   Define Absence Quota Types. Time Quota Types Quotas
    PersonnelIMG   Managing Time Time Data Recording and Administration Time Management   Calculating Absence Entitlements Accounts Using Attendance/Absence Quotas   Permit Quota Generation Without TimeAutomatic Accrual of Absence Quotas  Evaluation.
    Time Time Evaluation  Personnel Time Management IMG   Set Personnel Subarea Groupings for Time Recording.Evaluation Settings
     Time Data Recording and Administration  Personnel Time Management IMG  Managing  Calculating AbsenceTime Accounts Using Attendance/Absence Quotas   Set Base Entitlements  Rules for Generating Absence Quotas Entitlements  Base Entitlement for Absence Quota Generation.
    Personnel TimeIMG   Managing Time Accounts Time Data Recording and Administration Management   Rules for Calculating Absence Entitlements Using Attendance/Absence Quotas   Determine Validity and Deduction Periods.Generating Absence Quotas
    IMG  Managing Time Data Recording and Administration  Personnel Time Management   Calculating Absence EntitlementsTime Accounts Using Attendance/Absence Quotas   Define Set Base Entitlements  Rules for Generating Absence Quotas  Generation Rules for Quota Selection.

  • How to config Define basic materials in material master

    Hi Guru
    IN SPRO Logistic General-Basic Setting -Material Types-Setting of key field-Define Basic material
    Can you guide me how to confige &check with warning error mesage by maintaining test data in material master.

    Hi,
    Path  for Basic Material: SPRO >IMG< Logistics - General > Material Master > Settings for Key Fields > Define Basic Materials
    for maintain " Basic Data 2" view of Material master  Tcode : OMS2
    Select  material type and double click on it. And chose  Basic Data 2 in user departments .
    Hope it helps you
    Thanks.

  • How to install drivers for ati radeon 3200?and how to config xorg.co ?

    how to install drivers for ati radeon 3200?and how to config xorg.conf?

    mawch wrote:how to install drivers for ati radeon 3200?and how to config xorg.conf?
    Hello
    I am using ati hd 3200 which is integrated with my motherboard. If you are using arch you can download & install through pacman. The package is named like catalyst*. You can install them by issuing as root user
    #pacman -Sy
    #pacman -S -l | grep -i catalyst
    #pacman -S catalyst catalyst-utils
    After installation reboot your machine in runlevel 1. (single mode).  Ensure "fglrx" module is loaded correctly using
    #lsmod | grep -i fglrx
    If the resultant output have "fglrx" part  the module is loaded correctly. The next step is to create a working /etc/X11/xorg.conf. Backup your current xorg.conf if needed.
    #cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bkup
    Then issue
    #aticonfig --initial --input=/etc/X11/xorg.conf
    This will create a new xorg.conf file. Now we can test our confign.
    #telinit 3
    I am using runlevel 3 to avoid graphic messup!!
    issue
    #gdm
    If you graphical login screen works correctly there is nothing to do more except adjust your monitor resoloution as you like.
    To know your ati driver is working correctly issue as root
    #fgl_glxgears
    If gears are rolling happily it seems correct. You can also know more about installed ati driver
    #fglrxinfo
    Now the installed driver version is in the output 
    If there is any problem try following
    ##### Soloutions to solve various display problems using ATI Catalyst Drivers in Linux #####
    yes video playback is choppy until i ran :-
    sudo aticonfig --overlay-type=Xv
    Try adding the following to the 'Device' section in /etc/X11/xorg.conf
    Option "TexturedVideo" "true"
    ### This is a half solution for mythtv problems. Run mythtv in window (no full screen) If You have a screen resolution of 1024x768 try the command;
    mythfrontend --geometry 800x600
    Append the "Device" Section of /etc/X11/xorg.conf file as follows;
    Section "Device"
    Identifier "Videocard0"
    Driver "fglrx"
    Option "OpenGLOverlay" "off"
    Option "VideoOverlay" "on"
    Option "TexturedVideo" "on"
    Option "TexturedVideoSync" "on"
    Option "Capabilities" "0x00000800"
    BusID "PCI:1:0:0"
    EndSection
    Add following in the .bashrc of each user or /etc/bashrc file* Most Effective In My Case!!
    export LIBGL_ALWAYS_INDIRECT=true
    ####### Arch Linux - Add the "nopat" option to the /boot/grub/menu.lst or /boot/grub/grub.conf
    ####### as in the following example
    title  Archlinux Ice Kernel
    root   (hd0,1)
    kernel /boot/vmlinuz26-ice root=/dev/sda2 ro resume=/dev/sda3 quiet splash nopat
    initrd /boot/kernel26-ice.img
    NB: REGULAR DISCLAIMER IS ALSO APPLICABLE TO THE ABOVE MATTER; USE IT AT YOUR OWN RISK !!!  ALL THE ABOVE INFORMATION IS COLLECTED FROM VARIOUS POSTINGS IN THE FORUM AND FROM MY OWN EXPERIENCE
    Wish U good luck
    mvdvarrier

  • How to config the oracle database connection pool in IAS

    Hi,
    Does anyone who hows to config the oracle database connection pool in IAS?
    Thanks so much!!!
    [email protected]
    Jacky

    Jacky,
    You need do the following for oracle type4 driver:
    1) register the driver:
    $IAS_HOME/bin/jdbcsetup
    Driver Identifier: Oracle_Type4_816 (whatever name you like)
    Driver Classname: oracle.jdbc.driver.OracleDriver
    Driver Classpath: .../classes12.zip (install this this zip file somewhere
    and add this zip into the Classpath later).
    2) DataSource Setup:
    start iAS Administration Tool (iASAT)
    Choose Database, unfold iAS1 (your app server instance),
    choose External JDBC Datasource -> add: DataSource Registration
    JNDI Name: yourPoolName
    Driver Type: Oracle_Type4_816 (select what you just register)
    DataSource Url: jdbc:oracle:thin:@hostName:portName:dbName
    Username: your_user_name
    Password: your_passwd
    (Datasource Pool: using defaults for now): you can also customrize the
    parameters for the pool.
    3. Add classes12.zip into CLASSPATH.
    In your application, you can use JNDI lookup to get the DataSource from
    which you get the connection from the pool.
    Hope this helps.
    Good luck.
    Xuran
    "Jacky Yan" <[email protected]> wrote in message
    news:9m0tmp$[email protected]..
    Hi,
    Does anyone who hows to config the oracle database connection pool in IAS?
    Thanks so much!!!
    [email protected]
    Jacky

  • How to config the Leave in advanced?

    Hi all !
    Please help me to solve my problem.
    In my company:
    (A) : Employee/s with 12 months service is/are entitled to a vacation with full pay. Number of paid workdays vacation is 12 workdays for all staff
    And
    (B) : Employee/s can take maximum 5 leave days as advanced leave days. This leave day is approved when vacation and/or compensation are/is zero, this's mean (A) = 0.
    So I setup the SAP system below :
    (A) : Absence Quota Type = "60" it mean is Allowed Quotas for the leave in vacation with default values is 12 days => (A) it's ok. i can use IT2001 for Leave in Vacation. When (A) = 0 , employee can take (B) to leave.
    (B) : I don't know how to config this.
    So how to config to Employee take advance leave ? and i think that IT2001 used for (A) so  what 's the Infotype used for (B)?
    Thanks for your support.
    Huyen Nguyen.
    Edited by: Huyen Nguyen on Feb 9, 2009 4:16 AM

    No body help me!

  • 5.1 Audio with 3 jacks: How to config this ?

    Good evening everybody,
    I'm having since short a 5.1audio set, a logitech x540. I love this set, not too priced for a 5.1set. I'm coming from some crappy cheap trust 2.1set, so this is a big improvement.
    But now the problem: my set needs to be connected to my motherboard with those '3 jack cables', because it's not having a coax cable. (normal for a budget set). But my motherboard has got only those 3 'normal' jacks. But not a big problem, i found the following in my motherboard guide:
    Light Blue : Surround
    Lime    : Front Speaker Out
    Pink : Center/bass
    So hardware seen it isn't a problem to use those jacks . So i connected them like told in my motherboard manual. But now i don't get them working under linux. I don't know how to config it. I'm having the following audio card:
    00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
    I'm using alsa, so i've searched in alsamixer, but i didn't find anything usefull there. Anybody who can help me with this pls ?

    I have a very cheap C-Media PCI CMI8738-MC6 6-channel sound card connected by three jacks to Logitech 5.1 speakers. I also have a headset for Skype connected to the onboard sound.
    Here's what I know:
    1) To always get the sound card module to load before the onboard sound module, I have added snd_cmipci to my "modules" list in /etc/rc.conf. This means the cmi card is always card 0, the module for the onboard sound gets loaded automatically later.
    2) I have ~.asoundrc as follows:
    # 6 channel dmix:
    pcm.dmix6 {
    type dmix
    ipc_key 1024
    ipc_key_add_uid false
    ipc_perm 0660
    slave {
    pcm "hw:0,1"
    rate 48000
    channels 6
    period_time 0
    period_size 1024
    buffer_time 0
    buffer_size 5120
    # upmixing:
    pcm.ch51dup {
    type route
    slave.pcm dmix6
    slave.channels 6
    ttable.0.0 1
    ttable.1.1 1
    ttable.0.2 1
    ttable.1.3 1
    ttable.0.4 0.5
    ttable.1.4 0.5
    ttable.0.5 0.5
    ttable.1.5 0.5
    pcm.duplex {
    type asym
    playback.pcm "ch51dup" # upmix first
    capture.pcm "hw:0"
    # change default device:
    pcm.!default {
    type softvol
    slave.pcm "duplex"
    control {
    name "Software Master"
    card 0
    # for aoss
    pcm.dsp "duplex"
    pcm.dsp1 "duplex"
    3) To allow amarok to play each speaker individually using a 6 channel DTS .wav file I added the following to my ~.xine/config
    audio.device.alsa_surround51_device:plughw:0,1
    4) You can download a 60MB 6-channel DTS test file here. It is in swedish but tests each speaker individually.
    My info came from browsing the Alsa wiki

  • How to config CME with FXS card for analog phones

    I want to config FXS cards in CME router with SCCP protocol for transfer, pickup ... feature. I can find information about the sccp (the command about stcapp), but I can not find the information about how to config CME, e.g. the phone no.(something like ephone-dn .... )
    Can anyone help me ? or send me the link
    Thx
    Dennis

    Thx Johncaston,
    Your config is for H323, it doesn't support features, something like transfer funtion .......
    I have found the config for SCCP, let's share my finding
    ====================
    ephone-dn 178
    number 9933
    description Board Room
    name Board Room
    hold-alert 30 originator
    ephone-dn 179 dual-line
    number 9990
    description Meeting Room 3
    name Meeting Room 3
    hold-alert 30 originator
    ephone 95
    mac-address 9556.60FA.0200
    type anl
    button 1:178
    ephone 96
    mac-address 9556.60FA.0201
    type anl
    button 1:179
    GigabitEthernet0/0 is up, line protocol is up
    Hardware is MV96340 Ethernet, address is 0019.5566.0fa0 (bia 0019.5566.0fa0)
    ================================
    stcapp ccm-group 1
    stcapp
    sccp local GigabitEthernet0/0
    sccp ccm 172.16.136.125 identifier 1
    sccp
    sccp ccm group 1
    associate ccm 1 priority 1
    signaling dscp af31
    audio dscp ef
    voice-port 1/0/0
    cptone HK
    caller-id enable
    voice-port 1/0/1
    cptone HK
    caller-id enable
    dial-peer voice 21 pots
    service stcapp
    port 1/0/0
    dial-peer voice 22 pots
    service stcapp
    port 1/0/1
    =========================
    Thanks !!
    Dennis

  • How to config History Log Changes Document for Mkt Plan/CPG/TP?

    Working in SAP 4.0...
    Dear Expert,
    I want to save the document changes for Marketing Plan, Campaign and Trade Promotion.
    How to config the document changes, since the information that recorded not complete.
    Please help....
    BR,
    Robin

    Hello Robin,
    In  CRM 4.0 follow the below path:
    SPRO --> Customer Relationship Management --> Marketing --> Marketing Planning and Campaign Management --> General Settings --> Edit Categories for Change Documents
    Then maintain the entry for application as MKT for each entry, then under object type: CPG, CPT, MPL, MPT, TPM, TPT  and then Check box the entry under change document for all the entries.
    If you want to display the change log history use report : CRM_MKTPL_CD_DISPLAY in CRM 4.0
    Thanks & Regards
    Raja Pamireddy
    CRM Marketing Forum Moderator

  • How to delete inspection type assigned in material on mass level

    Hi Team,
    How to delete inspection type assigned in material on mass level. This inspection type is assigned in material master with indicator set as"Task List", however we are using "material specification". This inspection type is assigned to material type using t-code QA08.
    I can deactivate this inspection type using QA08, but I want to delete this record from material master first. So that it would adopt my config. next time when I will assign again insp.type in QA08. I have set this indicator in config. of insp. type as default to "material specification".
    Pls suggest me solution to delete this insp. type record from material master.
    Thanks

    hi
    if Material speciiication and task lists are checked -- then no need to do anything,
    but only task list checked and u want to do based on mat.spec -- then you need to deactivate and reassign same inspection type using QA08.
    no other way, ensure ur stocks are not in QI
    thanks
    Sami

  • Switch Switch1(config)#switching-type

    Does anyone know how to configure-retreive these settings for a 3560 POE switch?
    I would like to be able to configure individual ports to cut-through, fragment-free etc...
    Switch1(config)#switching-type ?
    fragment-free Fragment Free mode
    store-and-forward Store-and-Forward mode
    Switch1(config)#switching-type store-and-forward

    Hi,
    This is a global configuration for the switch and it effects the whole switch. This cannot be done on per port basis.
    HTH, Please rate if it does.
    -amit singh

  • How do i add type kit fonts to muse web site

    how do I +add type kit fonts to muse website

    Hi.
    Check this video, might be helpful
    Let me know if you have any questions

Maybe you are looking for