How to config vpn pool on asa5510 in a Multi-hop routing lan?
home----internet----asa5510(172.16.0.1/30)----(172.16.0.2/30)Internet behavior management(172.16.0.5/30)----(172.16.0.6/30)LAN(192.168.1.0/24)
I want to use 'remote access ipsec vpn' to connect LAN(192.168.1.0/24),but i don't konw how to config vpn pool on asa 5510.
Does someone kown how to do?
Hi,
The VPN Pool could be pretty much any network/subnet.
The amount of routing hops on the LAN network doesnt really matter. The ASA should have a route for the LAN network so it can forward the VPN user traffic there. The return traffic from the LAN to the VPN user should be forwarded with the default route of the network devices. If your default route isnt pointing to this ASA then you naturally need to add a route for the VPN Pool on your LAN devices.
Though I am not sure I have understood your question completely.
- Jouni
Similar Messages
-
How to config the oracle database connection pool in IAS
Hi,
Does anyone who hows to config the oracle database connection pool in IAS?
Thanks so much!!!
[email protected]
JackyJacky,
You need do the following for oracle type4 driver:
1) register the driver:
$IAS_HOME/bin/jdbcsetup
Driver Identifier: Oracle_Type4_816 (whatever name you like)
Driver Classname: oracle.jdbc.driver.OracleDriver
Driver Classpath: .../classes12.zip (install this this zip file somewhere
and add this zip into the Classpath later).
2) DataSource Setup:
start iAS Administration Tool (iASAT)
Choose Database, unfold iAS1 (your app server instance),
choose External JDBC Datasource -> add: DataSource Registration
JNDI Name: yourPoolName
Driver Type: Oracle_Type4_816 (select what you just register)
DataSource Url: jdbc:oracle:thin:@hostName:portName:dbName
Username: your_user_name
Password: your_passwd
(Datasource Pool: using defaults for now): you can also customrize the
parameters for the pool.
3. Add classes12.zip into CLASSPATH.
In your application, you can use JNDI lookup to get the DataSource from
which you get the connection from the pool.
Hope this helps.
Good luck.
Xuran
"Jacky Yan" <[email protected]> wrote in message
news:9m0tmp$[email protected]..
Hi,
Does anyone who hows to config the oracle database connection pool in IAS?
Thanks so much!!!
[email protected]
Jacky -
How to make VPN client auto timeout when it still idle?
How to make VPN client auto disconnect when it still idle?
Hi,I found some user still connected the VPN evenif they dose not use the VPN resouse.
I try to set a "idle timeout" for the VPN configuration.
We use PIX515 8.0.3 and CISCO ACS 4.2 for the VPN's connection and authentication,and the user use cisco vpn client for the connection.
I have tried many methods,but all failured.
First,I configed "vpn-idel-timeout 5" on PIX.It can not worked.
so,I add Radius(CISCO VPN 3000/ASA/PIX 7.0+) attribute "[026/3076/050] Authenticated-User-Idle-Timeout" on CISCO ACS,It still not worked.
And I also add IETF RADIUS Attributes "[028] Idle-Timeout" on group setting on ACS,it always not worked.
i found in vpn client's statistics,it always has some byte sended or received, i thought it maybe IPsec keepalive message or Radius message.
This maybe the reason because the PIX or ACS think the vpn user is keep working.
Can someone tell me how to make a "idle time out"?
best regard.
Rogerhere is the configuration on PIX,
group-policy DfltGrpPolicy attributes
wins-server value 10.0.0.67 10.0.0.68
dns-server value 10.0.0.67 10.0.0.68
vpn-simultaneous-logins 20
vpn-idle-timeout 5
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpn-acl
default-domain value mydomain.com
address-pools value vpnpool group-policy DfltGrpPolicy attributes
wins-server value 10.0.0.67 10.0.0.68
dns-server value 10.0.0.67 10.0.0.68
vpn-simultaneous-logins 20
vpn-idle-timeout 5
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpn-acl
default-domain value want-want.com
address-pools value vpnpool -
How many concurrent VPN client sessions available for cisco 2621XM?
I have cisco router 2621XM with IOS c2600-advipservicesk9-mz.124-11.T4.
I want to know, how many concurrent VPN client sessions can be available in this image.here is the configuration on PIX,
group-policy DfltGrpPolicy attributes
wins-server value 10.0.0.67 10.0.0.68
dns-server value 10.0.0.67 10.0.0.68
vpn-simultaneous-logins 20
vpn-idle-timeout 5
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpn-acl
default-domain value mydomain.com
address-pools value vpnpool group-policy DfltGrpPolicy attributes
wins-server value 10.0.0.67 10.0.0.68
dns-server value 10.0.0.67 10.0.0.68
vpn-simultaneous-logins 20
vpn-idle-timeout 5
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpn-acl
default-domain value want-want.com
address-pools value vpnpool -
I have pix 515e locate in office w/ IPSec VPN service ,that just for out of Office to access email
I wanna know how to config the VPN user thru the office Internet to access the web
Such I'm in china to access Facebook while I connected the VPN
Sent from Cisco Technical Support iPad AppHi Asa,
Under group-policy, issue command "vpn-simultaneous-logins 1' - This allows one user login at any time. If the same username tries from any other location, the first login automatically disconnects.
hth
MS -
How to config a new remote on apple tv (first generation). I have lost my remote which came with the apple tv.
Do you mean you've replaced your remote and it wont work because your AppleTV is paired to your lost remote?
If so, http://support.apple.com/kb/HT1555 has you covered. -
How To create Connection Pooling in Oracle 10.1.2.0 Application Server
Hi,
How to create Conncetion Pooling in Oracle 10g Application Server. I am using 10.1.2.0 version.
Thanx
DhansHi,
How about these tutorials?
http://www.oracle.com/technology/tech/java/newsletter/articles/oc4j_data_sources/oc4j_ds.htm
http://www.oracle.com/technology/products/jdev/tips/duff/mysql_and_oc4j3.html -
Hi,
How to config OD Report if I want result display as below SQL command
select a.accountname,count(b.salestage),
(select count(b.salestage) from opportunity b where salestage in ('Closed/Did Nothing','Closed/Lost'))
from account a,opportunity b group by a.accountname
Thanks
Paeif submit url with parameter
http://hostname:7778/reports/rwservlet?destype=PRINTER&desname=lpSZ_R02_2&report=sticker.out
error
REP-50159: Executed successfully but there were some errors when distribute the output
How to Solution? -
How to config ZFS in solaris 10
hi,
I'm testing solaris 10 x86 edition in my PC. but i don't
find any information about how to config ZFS in 10 (X86).. ;-(
if anybody know it, pls.give me some information.
thanks a lot.ZFS has not yet been integrated into Solaris 10...
At this time you need either the "Software Express for Solaris 2/06"
( http://www.sun.com/software/solaris/solaris-express/ ) or the
"Solaris Express: Community Release"
( http://www.opensolaris.org/os/downloads/on/ ) to play with ZFS.
. -
How to Install VPN and how to connect client Application server
Hi All,
Could any one tell me. How to connect Client's Application server and How to Install VPN. Thanks in advance.......
Thanks & regards
Vardhanwhere r u working?
ask your help desk to give the URL link to down load vpn
after downloading install it, its just like a wizard
you need to give your userid and password , and secureid number
secureid is a small device which displays a number(say a 6 digit number ) this number is keeps on changing for every one minitue.
you need to enter the number which is displaing while you are trying to connect to vpn.
in the middle of connecting to vpn if your secureid number changed , you need to login once again by the same procedure -
How setup SPA525 vpn client?How configuration Cisco VPN server?
Hi all,
How setup SPA525 vpn?
How configuration Cisco VPN server for SPA525?
Regards
JohnHi John,
Do you want to setup the SPA525 on the UC300? If so the UC300 does not support any VPN or remote users. If you need configuration help with the UC5XX just let me know.
Thank you,
Jason Nickle -
How to config the telephony button in CRM 5.0 (win client)
Dear Sir,
I can't find the documents how to config the telephony button in CRM5.0 (win clicent). Please kindly advise.
Thank you and best regards,
Vimoli can find the solution
-
How to config the web.xml file, when I use Richfaces + RI 1.2?
Hi there:
I want to use Richfaces + RI 1.2 to build a project. I don`t know how to config the web.xml file.
By the way, my web server is Tomcat 6.0, my JDK's version is 6u6. I don`t want to use the facelets.
thanks.
lxmjust add this before *</web-app>*
<context-param>
<param-name>org.richfaces.SKIN</param-name>
<param-value>blueSky</param-value>
</context-param>
<filter>
<display-name>RichFaces Filter</display-name>
<filter-name>richfaces</filter-name>
<filter-class>org.ajax4jsf.Filter</filter-class>
</filter>
<filter-mapping>
<filter-name>richfaces</filter-name>
<servlet-name>Faces Servlet</servlet-name>
<dispatcher>REQUEST</dispatcher>
<dispatcher>FORWARD</dispatcher>
<dispatcher>INCLUDE</dispatcher>
</filter-mapping> -
How to config the font size of rich pod?
Hi,
Does anyone know how to config the font size of rich pod? It's too small.
Thanks!You can do that using the PRINT-CONTROL Statement.This will only work when you send the list to the printer.Sample code is as below :
REPORT zfont NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
Start of print-control
NEW-PAGE PRINT ON.
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
SKIP.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
SKIP.
PRINT-CONTROL FUNCTION 'SF008'.
WRITE: / 'This is CPI 12'.
Depending on your SAP printer device, this may also work
PRINT-CONTROL FONT 1 LPI 6.
you can try to change font and LPI numbers
WRITE: / 'font 1 lpi 6'.
PRINT-CONTROL FONT 2 LPI 6.
WRITE: / 'font 2 lpi 6'.
PRINT-CONTROL FONT 3 LPI 6.
WRITE: / 'font 3 lpi 6'.
End of print-control
NEW-PAGE PRINT OFF.
*--- End of Program -
Hi Experts,
I am learning GP(Guided processor)according the document
http://help.sap.com/saphelp_nw70/helpdata/en/44/0d5b8f250d5cfae10000000a155369/frameset.htmneed.
I meet two question when I learn the GP.
The first:
This document don't tell me how to config the member framework of the company. After I design the GP, I have to config the user and role in the runtime for executing. I hope I can use the WDA(webdynpro for java or webdynpro for java) to implement to config the user for executing in the runtime. Thus, the customer don't config the user when runing the GP. But I don't know how to do this.
I need a document guide step by step to tell me how to do this.
The second:
If I use the workflow in the GP, I have to install and config the NWDI(Netweaver Development Infrastructure). Now I have installed the NWDI, but I don't know config it so that I can download it to my machine for develop the workfolw in the GP.
Do you give me some hints? Thanks a lot.
Thank a lot.
Best regards,
taoHi, Mithu,
Thanks a lot for your help in advance.
I have carefully read the document: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6b66d7ea-0c01-0010-14af-b3ee523210b5.
Now, I think I have to set the processor of every actions in every process if I use the GP for processing the workflow.
I am better to hope that I can set the processor to the role for every actions in every process in the runtime through get the organizational structure in the WDA(webdynpro for java or webdynpro for java). Thus, the customer don't set the processor to the role for every action in every process when runing in the GP. I don't know how to do this.
Whether the function is not supported in the GP? If so, I have to config two organizational structure: in the R/3 and in the Portal. I don't think our customer don't receipt this solution.
Do you give me some hints? Thanks a lot. My email: [email protected]
Thanks again.
Thanks & Regards,
Tao
Maybe you are looking for
-
I urgently need to make some audio tracks from videos using the new 2013 GarageBand. In iLife11 Garageband, this was very easy. However, I cannot see how to do it in the new one. The alternative might be to revert to the iLife11 version, so does anyo
-
HT1212 Why does my ipad request a password if i never set one up
I never set up a passcode; however, my ipad is requesting a 4 digit passcode. I tried 0000 and other passcodes until it was disabled. Any ideas?
-
Hi, can any body solve my issue
Hi friends, When we create sales order, as we know using backword scheduling first system checks stock. If stock doesnt exist, forward sceduling is carried out to find out the next material availability date & Delivery date. Could somebody explain in
-
My iPod show total white screen as soon as I connect it to my PC and cannot syncronize
My iPod nano 6th generation cannot syncronize anymore to the PC (I tried with three different PC with latest iTunes installed) and as soon as I connect it to the PC the icons on the screen disappear and it shows total blank white sreen. And it has lo
-
Different File Sizes on Linux Samba - depending if bound to AD or not
The Macs are running 10.5.7 and are bound to a 2003 Active Directory. We connect to a Redhat Linux Samba file server. The authentication is handled by AD. The issue is that all the file sizes show up too large. Anything less than a 1MB is shown as 1M