How to Configur Oracle System

Hi,
I configured SAP R/3 System on portal.
and also i created transactinoal iveiw using R/3.
Let me know how to connect oracle system and how to create iview to show date which there in oracle date base.
For example
i want to show of EMP table in oracle on portal iview.
please help..
regards
praksh..

Hi
You can connect to a database using a JDBC iview already present in PCD or you can create a portal archive file which contains a servlet or JSP using simple JDBC API of java   .the portal component that can be used is abstract portal component or jsp dynpage but as you wite code in java you can do the same thing here.Register drivers in system before you connect it and then deploy the portal component using Netwever developer studio or uploading archive straight away through pcd inspector .Just use ip address in code if it is a distributed data base which must be in same domain as portal otherwise need to build trust relationship between two domains.hope this helps you please do not forget to give points
with regards
subrato kundu

Similar Messages

  • How to configure oracle thin drivers for SUN APPLICATION SERVER

    hi all,
    I am working with EJB with oracle as back-end. I wants to know how to configure oracle thin drivers for the SUN APPLICATION SERVER. Please explain me breifly.
    Advanced thanks to all the replies.
    with regards,
    /kumaraswamy.n

    Kumaraswamy,
    Did you try searching the Internet? Here are the results of my Internet search:
    http://tinyurl.com/zo4gk
    And one of the first hits in the list was this:
    Deploying to a Sun Java System Application Server
    Good Luck,
    Avi.

  • How to configure Oracle SSO for OBIEE

    Hi all
    Can anyone help me saying how to configure Oracle Single Sign-on with OBIEE?
    Basically I want to enable a common login for Dashboard and answers using SSO.
    I am using OBIEE 10.1.3.4 on a Redhat Linux
    thanks in advance

    Hi...
    See this, hope this what you want...??
    If not .. ignore...
    Thanks & Regards
    Kishore Guggilla

  • How to configure Oracle Enterprise Manager for ASM RAC Database ?

    Dears,,
    We have two databases (Primary & Standby), each database has two instances
    Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
    How to configure Oracle Enterprise Manager for this environment ?
    I need documentation for this please.
    Many thanks & Regards,,

    Assuming an agent is running on the servers you want to monitor,
    navigate to the Agent home page (Via setup --> Agent)
    When in the agent home page select 'Add Database'and press [Go]
    Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
    When done, press [Ok] to return to the agent home page.
    Regards
    Rob
    http://oemgc.wordpress.com

  • How to configure Oracle 10g RAC on windown sever 2003

    hi all
    plz tell me
    how to configure Oracle 10g RAC on windown sever 2003 can any body help me , give be any link
    plz it is very necessary for me
    Regards

    Hello,
    There are a good doc written by Philip Newlan at www.jobcestbon.com/oracle/RacOnWindows.pdf
    Regards,
    Rodrigo Mufalani
    http://mufalani.blogspot.com

  • How to configure Oracle jsp engine on OAS4.0.8.1

    1. How to configure Oracle jsp engine on OAS4.0.8.1 for linux
    2. How to set the parameter on OAS. The Ojsp document only give examples depict the syntax used when running in an Apache/JServ 1.0 environment

    Anyone?

  • How to configure Oracle 10g Advanced Security to use SSL concurrently with

    How to configure Oracle 10g Advanced Security to use SSL concurrently with database User names and passwords
    In Oracle Advanced Security Documentation it is mentioned that i can use SSL concurrently with DB user names and passwords. But when i configure the client certificate on the client my DB connection is getting authenticated using the certificate, which out passing user id or password.
    We want to connect to Oracle DB over SSL channel so that the data packets are not in clear text. Also we want the user to make a connection using user id and password.
    Basically we want SSL with out authentication.
    Need your expert advice

    Read the documentation (I have given following links assuming you are running a 32 bit architecture)
    Server installations:
    http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14316%2Ftoc.htm&remark=portal+%28Books%29
    Client installations:
    http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14312%2Ftoc.htm&remark=portal+%28Books%29
    You can find the required books (if not using 32 bit architecture) from
    http://www.oracle.com/pls/db102/portal.portal_db?selected=3

  • How to configure Oracle Enterprise manager 11.2.0.1 for ASM instance

    Hi All,
    Please let us know How to configure Oracle Enterprise manager 11.2.0.1 for ASM instance.
    Reagrds,
    Vikas

    Assuming an agent is running on the servers you want to monitor,
    navigate to the Agent home page (Via setup --> Agent)
    When in the agent home page select 'Add Database'and press [Go]
    Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
    When done, press [Ok] to return to the agent home page.
    Regards
    Rob
    http://oemgc.wordpress.com

  • How to configure a system property

    Hi everybody,
    Does anybody know how to configure a system property through WebLogic 11g console?
    I´d like to configure a property through web console and then get this property in my java code. Something like this:
    System.getProperty("foo");
    Is it possible?
    Thanks,
    Fernando

    Hi Fernando,
    Please refer to the following link which tells us how we can set the JAVA_OPTIONS from the Admin Console....
    http://weblogic-wonders.com/weblogic/2010/03/26/nodemanager-based-managedservers-setting-mem_args/
    The above link demonstrate that how we can set *"-Duser.dir=E:/MyDirectory"* System property.....
    Now you can set your own JAVA_OPTION like following:
    -Dfoo=MyFooValue
    After setting above propertu in AdminConsole MEM ARGS you need to restart the Server. then you can use the following code:
    String result=System.getProperty("foo");
    Thanks
    Jay SenSharma

  • How to configure satellite system in Solution manager

    Hi,
    Please advise me how to configure satellite system in solution manager.
    Regards,
    Asif

    Hi,
    can you check this installation guides
    [ http://service.sap.com/solutionmanager][http://help.sap.com/saphelp_smehp1/helpdata/en/b7/07e4cf1a364a0482e29122c329b7d3/frameset.htm]
    Regards,
    Muralidhar

  • How to configure HA system

    Hi Expert,
    how to configure HA system, i am having ecc6.0 ehp4 with maxdb7.8.in my existing landscape i am having DR setup.
    please guide me on that.
    Thanks.
    Naresh KK

    Hello Naresh,
    Please go through the following links for better understanding of HA installation.
    http://www.sdn.sap.com/irj/sdn/ha#section16
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c029ec90-0201-0010-b192-8306f27295c2?QuickLink=elearn&overridelayout=true
    Please let us know if you still need clarification.
    Thanks,
    Siva Kumar

  • How to configure oracle listener profile for multiple oracle database

    Hi,
    I am going to install solution manager system in the same server of ERP EHP4 on Windows. Both DB are oracle.
    I'd like to know how to configure listener in this kind of envirnmonent.
    a. use two listener and different ports
    b. use same listener but different ports
    c. use same listener and same port
    Which is the correct mothed?
    And, after installation, there seem three set of profiles of listten, one for ERP, one for SLM, and the other for OS?(%windir%system32), which one is functional?
    Please advise.
    Thanks a lot.
    Regards,
    Alex

    Hi,
    standard installation is creating new configs for listener for each instance.
    I would recommend to use one listener per each instance.
    YOU CAN NOT HAVE one port number for two differnet systems!
    If you want to use one listener than you must adapt tnsnames.ora, listener.ora and ensure that both systems will use different port numbers.
    For example PORT= 15<system number>
    Peter

  • How to configure Oracle Alerts For Sending EMail?

    Hi All,
    I am using Oracle Apps 12.1.1.
    I am configuring Oracle Alerts to sent a email.
    for that i have set
    Unix send mail :/usr/lib/sendmail
    Mail Database/Server Name:172.16.0.6
    Mail Priority:Normal
    In Accounts:
    User Name:My User Name
    Password:******
    Anything need to configure because after submitting a request It is showing that request is successfully completed but not receiving mail.
    Please Help.
    Thank In Advance.
    Regards,
    SHD

    Hi;
    please check below links:
    Alert-EBS
    General EBS Discussion
    Oracle Periodic Alert..
    Oracle Periodic Alert..
    Also see:
    Oracle Alert Documentation Resources, Release 12 [ID 396315.1]
    How to determine what email system is being utilized for Oracle Alert processing [ID 428193.1]
    Configuring the Oracle Workflow 2.6 Java-based Notification Mailer with Oracle Applications 11i [ID 231286.1]
    How to setup Email Notification from Microsoft Exchange with Oracle Alerts [ID  163249.1]
    Regard
    Helios

  • How to configure Oracle SSO for forms and apex

    Hi All,
    I am trying to configure oracle SSO for forms and apex using third party external authentication. Please help me how to configure. I a have tried all possible things
    from web but I am not able to do it. Is there any doc or links are much appreciated.
    Info: Some reason my oiddas web link is not working it used to work fine before and also the from /pls/orasso/ link I am not able to login may be because of my oiddas issue
    Thanks

    Hi Andreas,
    Thanks you for your help. I am trying to implement third party external LDAP authentication for APEX and Forms.
    So I started with OID and SSO setup to create external Partner Applications. Some reason my oid and sso web login links are not working. I didn't find any errors. I need some help in finding the problem and direction, I already read docs on web but no proper direction. I appreciate your help.
    Thanks

  • How to configure Oracle WebLogic NodeManager as a MS service

    Hi Experts,
    I installed OBIEE 11.1.1.5, and i want to configure OBIEE start/stop as windows services.
    for that and after a successful configuration, Oracle configure by default two windows services: Weblogic Node Manager and FMW 11g Process Manager (OPMN).
    The problem is that Weblogic Node Manager is missing as a widows service.
    How can i do to create and configure it manually, please.
    Thank in advance.
    Best regards,
    Hassan C
    Edited by: 972869 on 23 nov. 2012 03:27
    Edited by: 972869 on 23 nov. 2012 03:28
    Edited by: 972869 on 23 nov. 2012 05:09

    Hi,
    i see it, but that is for install Admin and manage server, what i'm asking for is Oracle weblogic NodeManager.
    the windows service i need is named "oracle WebLogic NodeManager (e_obiee11_wlserver_10.3)" or somethiing like that, is the first in the page of your link:
    Weblogic Node Manager
    *(configured as a MS Windows Service if Custom Install route is chosen when installing Weblogic)*
    I'm asking how to create it.
    Thank you.
    Edited by: 972869 on 23 nov. 2012 05:14

Maybe you are looking for