How to configurate the memory's size

Hi, everyone, as you know, when we start a project in WTK, its max free memory size is about 2M, but if I need more, how can I change this limitation? Thanks for your reply.

Hmm.. I didn't actually try it for myself :-) you gonna tell us if it worked?
And is that lonely Duke for the forum pickle pool?
db
you gonna tell us if it worked?Ah, sorry, I see you marked the answer as correct.
Edited by: Darryl.Burke

Similar Messages

How to know the memory

Hi
Following is the output of sh ver of cisco 2621 router. There is two place saying about the memory
cisco 2621 (MPC860) processor (revision 0x600) with 53248K/12288K bytes of memory.
another
32K bytes of non-volatile configuration memory.
what is the actual memory size? is it 64 or 32?
Can i install an IOS which minimum requires 64Mb memory in this Router?
#sh ver
cisco 2621 (MPC860) processor (revision 0x600) with 53248K/12288K bytes of memor
y.
Processor board ID JAD05440L9D (3776779414)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

In addition to Andrew info..
How to know the memory ?
cisco 2621 (MPC860) processor (revision 0x600) with 53248K/12288K bytes of memory.
when you get the above output from sh ver,
simply add 53248k + 12288k and always devide by 1024.
e.i
53248k + 12288k / 1024 = 64
64MB is your total memory in your router
Rgds
Jorge

How to check the memory and CPU usage on NPU

Hi expert ,
Could you tell me how to check the memory and cpu usage on NPU?
I think ASR1000 has this command (show platform hardware qfp active...) , but I coudn't find the same command on ASR9001.
I checked " show controllers np counters all" command, but I did not find it.
Platform: ASR9001
version: 4.3.2
NP: Tyhoon
Thanks,

Hi Kanako,
understand your question, but something like that doesnt exist for the trident/typhoon NPU's for the asr9k.
in fact cpu usage is not really applicable for parallel/serialized hardware forwarders, but mainly the KPI is here
the PPS it handles.
The max pps it can handle is dependent on feature set.
What you could do is measure the rates on the PARSE_FABRIC_RECEIVE count (packets received from fabric, so egress direction), PARSE_ENET_RECEIVE count (packets received from the interface to the fabric, so ingress) and the LOOPBACK count, that is packets that are recirculated for extra processing. The sum of these 3 gives an idea of the PPS rate the NPU is working on.
Memory consumption is something tricky also, there are many memories attached to the NPU, notably:
TCAM used for vlan matching, ACL and QOS matching
Search memory for L2 and L3 (shared on Trident, separated on Typhoon)
Frame memory for packet bufferin in QOS
Stats memory, for all kinds of counters of QOS maps, interface stats etc
their usage is rather dynamic also.
The few things you want to verify on these are:
- ACL usage (in terms of Tcam entries)
- MAC table size (2M max on typhoon)
- FIB size (4M max on typhoon)
frame memory is dependent on the buffering, which is a sum of all the packets instant queue length and size of all pmaps attached to interfaces served by the same NPU. there is no good overview as to how much you have available of that, but it has a rather significant size 1G or 2G depending on the TR or SE cards (typhoon specific).
regards
xander
Xander Thuijs CCIE #6775
Principal Engineer
ASR9000, CRS, NCS6000 & IOS-XR

How to change the default window size display font size on Lync 2013 main window?

Hi champs,
Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
Thanks,

Hi,
Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
If not, as I know, there is no natural way to change it.
If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How to overcome the Memory leakage issue in crystal report 2008 SP2 setup.

I have developed the small windows based application tool with help of Visual studio 2008 for identify the memory consumption of crystal report object. It helps to load the crystal report objects in the memory and then released the object from the memory. The tool simply does the u201CLoading and Unloadingu201D the objects in the memory.
The tool will be started once u201CTest_MemoryConsumption.Exeu201D executed. The u201CTest_MemoryConsumption.Exeu201D consumes u201C9768 KBu201D memory before load the crystal report object in memory. It means, 9768 KB is normal memory consumption for run the tool.
Crystal report object initiated by the tool and object help to load the report in memory once the tool initiated the crystal report object. Now u201CTest_MemoryConsumption.Exeu201D consumes u201C34980 KBu201D memory during the crystal report object creation and report load process. The actual memory consumption of crystal report object is 34980u20139768=u201C25212u201DKBu201D.
The memory consumption u201C34980 KBu201D will be continued till the end of the process. The memory consumption will be reduced to u201C34652 KBu201D from u201C34980 KBu201D once report load process completed. It means, u201C328 KBu201D memory only released from the memory consumption. Tool enables the Release command for the crystal report object. But crystal report object does not respond to the command and will not release his memory consumption.
The memory consumption u201C34652 KBu201D will be stayed in the memory once job ends. If i again initiate the crystal report object then it crystal report object start to consume the memory from 34652 KB.
Database objects and crystal report objects are properly used in the tool. The object release commands properly communicated to crystal report setup. But the u201CCrystal report service pack 2u201D setup unable to respond the commands which has enabled from .Net Tool. Crystal report objects are properly initiated and disposed in the tool. But the crystal report unable to release from the server.
The memory consumption will be reduced once the server restarted or kill the application.
Crystal report 2008 and crystal report 2008 SP2 setup available in the server.
Microsoft .Net Framework 2.0 SP2, Microsoft .Net Framework 3.0 SP2 and Microsoft .Net Framework 3.5 SP1 are available in the server,
Could you please suggesst how to avoid the memory consumption keep increasing and how to release the memory consumption once the crystal object disposed???

Hi Don..
My case is different one. I hope, the problem with Run time Installation setup file (Crystal report 2008 Serivce Pack2 installer) which we installed in the server.
Let me explain with Live scenario which our client faced in crystal report 2008 Service pack2 Installer.
Our client is using a application to help to print their reports. The application is developed with Windows service.
Windows service keep on running in the server. Windows service executes the client 's crystal reports( Labels Report, Stock report) which designed for clients need and the reports will be printed from printer.
10 Same type report (Label Report) will be printed in 1 minute. Reports are not printing during non business hours. But the windows service keep on running. Memory cosumption of application will be 160 MB in business hours.
For Example, On Monday the application memory consumption starts with 160 MB. The Memory consumption will be reached 165 MB in peak business hours. Then the memory will be ended in163 MB in the End of Monday. It means, The memory consumption will be in 163 MB during the non business hours. Reports will not be printed in non business hours.
On Tuesday, the application memory consumption starts with 163 MB and it will be reached 168 MB during the peak hours. The Memory consumption will be ended in 165 MB in the end of Tuesday. The same process contiues till friday. End of friday, the memory consumption of the application will be ended with 170 MB.
Application Memory Consumption slowly increasing in the server. In 5 days, Memory consumption reached Threshold value (170 MB) of the server. Application gets hanged up once the memory consumption reached 170 MB. We got the error messages as "Attempted to read write protected memory " / "Not Enough memory for process". If we restart server / If we restart the service then memory consumption of application get reduced to 160 MB.
From the above scenario, We came know that the either the problem with Application object or the problem crystal report object. In the application, We have checked dispose methods of application objects completly. I am sure that application objects are properly disposed in the application. I hope the problem not with application objects. The problem with Crystal report objects.
Application properly communicates the dispose methods to crystal report objects. Crystal report objects are not released from
the memory.
Crystal report 2008 Serive Pack 2 setup installed in the server.
As you said, If Crystal report runtime is not released from memory then memory consumption keep increase??? In service oriented architecture application, how to unload the crystal report runtime??
Do you any fix for this kind of issue??
Willl Crystal report 2008 service pack 3 help on this issue??

How to change the picture frame size in Lightroom 5 Book

I would like to control the actual picture frame size when making a Book in Lightroom 5. Or else know the sizes of the different picture frames provided by choosing the different page layouts. That way I can either change the picture frame dimensions to accomodate each photo or change the image size to fit in the offered picture frame. I find that using the software as is winds up cropping the images in unwanted ways. Modifying the picture frame would be my preferred alternative. Appreciate any ideas

Hi again Tony,
I have been using Adobe Photoshop 7, Photoshop Elements, Perfect Photo Suite, Photo Studio, etc., changing Image size, placing a picture on a page and then, do a simple last minute size adjustment by using the arrows to stretch or shrink it in place. Things would be a lot simpler if I could do the same thing with the cells in Lightroom 5. Cell pad adjustments do not fill the bill.
I think we’ve pretty much concluded this exchange. Thanks again for your effort.
david
ay [email protected]
Sent: Wednesday, March 12, 2014 11:27 PM
To: dgbrow
Subject: How to change the picture frame size in Lightroom 5 Book
Re: How to change the picture frame size in Lightroom 5 Book
created by Tony Jay <http://forums.adobe.com/people/Tony+Jay> in Photoshop Lightroom - View the full discussion <http://forums.adobe.com/message/6205206#6205206

How to enable the memory remapping in the bios?

How to enable the memory remapping in the bios?
my laptop: m100 psmaaq-00s003

Without removing a specific Windows Update KB Patch, and two registry keys, you CANNOT uninstall the Flash Player ActiveX Plug-in for IE in Win 8.
Microsoft released a new update for Flash Player in IE just the other day.
Have you run Windows Update recently?

How to know the OS block size ?

Hi all
I want to know how to get the OS block size of my server ?
For example if my server is Windows 2000 Professionnal , how can I get the size of my OS block size ?
Thank you

One way to find is to right click the drive in Windows Explorer and click Format (Not actually formatting it).
In the popup window, you would see the "Allocation unit size" for the selected drive. Click "Close" to exit when done.

How to define the memory leak in stability test

Hi
Usually, we run our system with 70% CPU load for 72 hours for stability test (on solaris 10), because some plugin of our system is using mtmalloc, and we use prstat to monitor the memory of each plugin. But because of the complex memory usage of our application, we don't know when the application will use the Max memory, and because of the "mtmalloc", the memory showed by "prstat" will not released but continually increased.
So fro the test point of view, there is the risk of memory leak, but actually, there may be no memory leak, so my question is how to define the memory leak in such condition.

kevin wrote:
Thank you for the input and all the info.
isn't java heap the same as memory allocated to the java process in my weblogic
starup script ?The heap is sized by the -Xmx and -Xms parameters you pass on the java
command-line. The permanent generation is separate.
>
let me also download jprobe and try to run it and see what it gives me.
I'd start by running with -verbose:gc. I'd want to know whether you're
running out of heap or permgen space.
-- Rob
kevin
Rob Woollen <[email protected]> wrote:
Unfortunately memory leaks are not fun to track down even with tools.
I'd first suggest determining whether you're running out of space in
the
permanent area (where classes are loaded), or you've exhausted the java
help space.
I'd start by adding -verbose:gc. Look at the gc messages right before
you hit the OutOfMemoryError. If there's plenty of space left, I'd
suspect you're running out of perm space. Search these newsgroups and
the web for MaxPermSize, and you should see plenty of info.
If you're running out of java heap, tools like jprobe and OptimizeIt
are
helpful. If you can tell me a little more about your application and
how you're testing it, I can offer some more tips.
-- Rob
kevin wrote:
Iam new to JAVA and weblogic. I have an application that runs out ofmemory time
and again.
please let me know how to pin point this problem and moreover, howto interpret
or understand that there is a problem. I have downloaded JPROFILE tool,but it
is very confusing to understand what is goin on in this tool.
If somebody can let me know how to interpret and understand the memoryleak, that
will be great !!!
thank you.

How to calculate the HFM Cube size in SQL Server-2005

Hi
How to calculate the HFM Cube size in SQL Server-2005 ?
Below query used for Oracle. Then what is query for SQL Server?
SQL> select sum(bytes/1024/1024) from dba_segments where segment_name like 'FINANCIAL_%' and owner='HFM';
SUM(BYTES/1024/1024)
SQL> select sum(bytes/1024/1024) from dba_segments where segment_name like 'HSV FINANCIAL%' and owner='HFM';
SUM(BYTES/1024/1024)
Regards
Smilee

What is your objective? The subcube in HFM is a concept which applies to the application tier - not so much to the database tier. The size of the subcube is the unique number of data strips (data values for January - December inclusive, for example) for the given entity, currency triplet or Parent.Child node. You have to account for parent accounts and customs which don't exist in the database but are generated in RAM in the application tier.
So, if your objective is to find the largest subcubes, you could do this by querying the database and counting the number of records per entity/value (DCE tables) or parent.child entity combination (DCN tables). I'm not versed in SQL, but I think the script below would just tell you the schema size and not the subcube sizes.
Check out Accelatis.com for a third party software product that can do this for you. The feature is called the Subcube Analyzer and was written by the same team that wrote HFM, so they ought to know how this works :-)
--chris

How to get the memory address of an array (pointer in C)?

I am writing an application that exchanges data with a PXI device via DMA. Basically I will provide it a memory address and a direction, and it transfers the data. I would like to give it the memory location of an array in LabVIEW, but I do not know how to get the memory location without doing a DLL call to C code that returns the pointer. Is there an easy way to do this in LabVIEW? Any help is much appreciated.

A similar question was asked recently regarding strings. You cannot pass pointers in LabVIEW as you do in C. You can pass an array to a DLL, but that means you would need to write a wrapper DLL. Be sure to read the section in the LabVIEW Help on calling code from text-based languages and also take a look at the "Call DLL" example that ships with LabVIEW - it contains many examples of how to deal with various datatypes.

How to manage the memory in i pad

how to manage the memory in i pad

Use iTunes on your computer to store items that you want to save but are not needed on the iPad. Learn to sync and also learn how to do file transfers. Delete unneeded items from the iPad.
When you connect your iPad to iTunes you will see a bar describing how much of your storage space is being used on your iPad. I always suggest leaving plenty of space open for the iOS and apps to operate.

Hello, I want to know how to clear the memory or buffer cash from my mac book?

Hello, I want to know how to clear the memory or buffer cash from my mac book? When I look at the series, it puts more and more time to load. Thank you.
Sorry for my english, i talk french.

Ok ce n'est pas le problème alors.
Boot à partir de votre disque d'installation et de lancerl'utilitaire de disque. Le disque de démarrage peut être nécessaire de réparation.
Using Disk Utility to verify or repair disks
Ok that's not the problem then.
Boot from your install disc and run Disk Utility. The startup disk may need repairing.

How to export the same mb size of my cr2 files into jpg or tiff files in Lr?

How to export the same mb size of my cr2 files into jpg or tiff files in Lr?
Let's say my file size is 22mb, when i export the file to tiff or jpg, although Iam careful with the settings- file size, dimension, resolution, I can't manioukate how I want it.
With jpg I tried everything, no matter what i do or change in files size or resoltion it remains the same size- 7mb as opposed to 22..
Please advise,
Best wishes,
T

I would noramlly opt for a tiff file, sending such a high res through the nest a nightmare
This is probably just an improper use of terminology, but the resolution of a JPG, DNG and TIF should all be the same.
The files differ in size, not resolution and not number of pixels.
Jpg is not that bad, but its a pitty they have to be edited under a jpg format..
Your raws are edited as raw. There is no loss of quality in the editing process. The files are then exported as JPG, which will cause a loss of quality. For just about any use, the loss of quality in the image when you export a JPG at quality level 12 is NOT noticeable. For many uses, exporting a JPG at a quality level of 8 will not be noticeable either, unless you intend to print the photo at a very large size. As twenty_one (not his real name) said, "Jpeg compression is fantastically effective".

Regarding how to configurate the sap java server environment

I've got started to develop java application using webdynpro for java, and the development environment is sap netweaver composition environment 7.1 sr3-trial version java ee only , but I have a little trouble about how to configurate the environment for connection with sap and what server configuration is necessary for java development.

Hi,
If you want to connect to a SAP back end create a JCo using the NWA. Usage: http://<host>:<port>/nwa
Once this is done you can import RFC and start accessing bacckend.
If you need to deploy this application to a SAP J2ee engine, you need to connect to the engine using
Window->Preferences->SAP AS Java
Specify the instance host and instance number
Click on the register SAP instance button.
Make this as your default SAP System.
Regards
Ayyapparaj

How to configurate the memory's size

Similar Messages

Maybe you are looking for