How to configure a 1131 set as WGB to auth via WPA2?

The guides I checked only describe: #1 - a 1231 using WEP and #2 only provides an example for WPA-PSK? I want to use an SSID configured on the WLC shown below. Is there a guide explaining the config for WPA2?
thanks.
Tom
Security
802.11 Authentication:........................ Open System
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Enabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Enabled
PSK..................................... Disabled
CCKM.................................... Enabled
1. Workgroup Bridges in a Cisco Unified Wireless Network Configuration Example http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080905cea.shtml
2. Configuring Repeater and Standby Access Points and Workgroup Bridge Mode
http://www.cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43hot.pdf

Hello,
The following link contains further details for authenticating the WGB via EAP-TLS:
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00809637dd.shtml
Hope this helps,
Fede
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Similar Messages

How to execute entire result set of multiple sql statements via sp_executesql?

I have a query that generates multiple insert statements (dynamic sql). So when I execute this my result set is a table of sql insert statements (one insert statment per row in my source data table). Like so:
Select 'INSERT INTO [dbo].[Table_1] ([Col1]) VALUES (' + SrcData + ')' from SourceDataTbl
How can I completely automate this and execute all these sql statements via sp_executesql?
My plan is to completely automate and execute all this via an SSIS package.
As always any help is greatly appreciated!
fyi- This is a very simple version of what I am trying to do. My query probably plugs in 20+ values from the SourceDataTbl into each of the sql insert statements.

Ah, a small error in Visakh's post, which I failed to observe, and then I added one on my own.
DECLARE @SQL Varchar(max)
SELECT @SQL =
(SELECT 'INSERT INTO [dbo].[Table_1] ([Col1]) VALUES (' + SrcData +
')' + char(10) + char(13)
from SourceDataTbl
FOR XML PATH(''), TYPE).value('.', 'nvarchar(max)')
EXEC sp_executesql @SQL
Without ", TYPE" FOR XML returns a string when assigned to a variable. The TYPE thing produces a value of the XML data type, so that we can apply the value method and get string out of the XML.
And why this? Because:
DECLARE @str nvarchar(MAX)
SELECT @str = (SELECT 'Kalle Anka & co' FOR XML PATH(''))
SELECT @str
SELECT @str = (SELECT 'Kalle Anka & co' FOR XML PATH(''), TYPE).value('.', 'nvarchar(MAX)')
SELECT @str
Although the data type is string when , TYPE is not there, it is still XML and characters special to XML are enticised.
Confused? Don't worry, for what you are doing, this is mumbo-jumbo.
Erland Sommarskog, SQL Server MVP, [email protected]

How to configure this setting

Hi All,
Just want to ask how to configure the following setting on ASA 5510?
I can't find the command to configure this command.
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:ac3594b9bcd390c9d52b2d666f0bb144
please help....

What software version are you running on the ASA? You'd need at least 8.2(2) to support smart call-home.
Thanks,
Wen

How to configure and deploy OAM 11g with DB setup using silent mode

Hello all,
I am trying to create automation process to install and configure OAM 11g on WLS. This task involves three stages
1. Install WLS
2. Install OAM 11g
3. Create DB schema using RCU
4. Configure and deploy OAM 11g
I have done first 3 stages in silent mode using scripts and response files. I am stuck at 4th stage. I know how to configure and deploy OAM 11g using config.sh via GUI installer as well as console mode. But I would like to run config.sh in silent mode something like
./config.sh -mode=silent -silent_script=<script_location>
I have searched a lot, but could not find any resource on how to do it? I tried passing the parameters via a text file. But that has not worked. I have also explored WLST, but it also does not work. Given that first 3 things are relatively very simple, the 4th step is becoming complex. I would be very thankful if someone can please point me in the right direction.
Thanks!

Have a look at your software directory : <sofware directory>/Disk1/stage/Response
Here you will find 2 rsp files which you can use to install and then configure it all.
Good luck.
Filip

I want to set up the Time Machine and I would love to use the Time Capsule but since I already have a wireless router I need suggestions on what other external disks Apple could recommend to use with the Time Machine and how to configure that disk

I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.

If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

How to configure DSL set up?

I'm using my old first generation iBook clamshell temporarily and I need to figure out how to configure it/set it up for DSL. It was configured for the ethernet system at my old university back in 2001 but I have no idea how my friend did it back then. Thanks so much!

Do you use a router between the DSL connection and computer, or does it connect directly?

Need Help: How to configure/set-up custom interchange code values in B2B

Hello All,
Hope everybody is doing well.
We are currently facing a problem in implementing Inbound 850 Purchase Orders in B2B from one of our Trading Partners (Customer).
The Customer will be sending us EDI ANSI X12 ver 4010 Purchase Order files, but in the file they are sending a custom GS08 (8th element of GS Segment having Version/Release/Industry Identifier Code) value i.e. "004010RIFMAT".
The above value is not present in the Standard Code values when we define an ECS using B2B Document Editor.
Hence the document is failing in B2B since it is not able to identify the Trading Partner.
If anyone has faced similar issues, I would appreciate if you could let me know on how to configure the same in B2B. Please let me know the steps in detail.
Thanks In Advance.
Regards,
Dibya

Hello Dibya,
Can you create a new group ecs with appropriate codelist for GS08 and use it while modelling B2B flow. Make sure to undeploy and validate the agreement.
Rgds,Ramesh.

How to configure oracle listener profile for multiple oracle database

Hi,
I am going to install solution manager system in the same server of ERP EHP4 on Windows. Both DB are oracle.
I'd like to know how to configure listener in this kind of envirnmonent.
a. use two listener and different ports
b. use same listener but different ports
c. use same listener and same port
Which is the correct mothed?
And, after installation, there seem three set of profiles of listten, one for ERP, one for SLM, and the other for OS?(%windir%system32), which one is functional?
Please advise.
Thanks a lot.
Regards,
Alex

Hi,
standard installation is creating new configs for listener for each instance.
I would recommend to use one listener per each instance.
YOU CAN NOT HAVE one port number for two differnet systems!
If you want to use one listener than you must adapt tnsnames.ora, listener.ora and ensure that both systems will use different port numbers.
For example PORT= 15<system number>
Peter

How to configure request manager service for multiple website in one web application

I have set up sp 2013 as below:
web application : wa1
site collection : sc1
sp site: site1, site2
I used 2 WFE, 1 APP, how can I use request manager service to control site1 to wfe1, site2 to wfe2?
Awen

That's not what i'd describe as load balancing.
A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
This article shows how to configure the RMS and may help show how your request is difficult to configure:
http://www.harbar.net/articles/sp2013rm2.aspx

Don't know which technology to utilize or how to configure ASA5505

I have an ASA5505. Currently, it is using static NAT on several ports to forward traffic to several devices inside my network. It is a pain not only to configure but from the end user side.
The issue I am having is the applicatoins I am using to access the devices become a mess with dual configurations, one for when I am connected to the internal network and one for when I am away from the office and accessing from the internet. For example, I have 2 Cisco VC240 IP Cameras behind the ASA5505. One is set use port 9091 and the other 9092. When I am inside the office, I access them via http://10.1.2.215:9091 and http://10.1.2.216:9092. But when I am away from the office, I have to have another configuration in an Android app to use them, http://external_ASA_IP:9091 and 9092 and then NAT 9091 to the object for Camera1 and 9092 for Camera2. This is only one scenario. I also have a UC320W that I would like to put an IP phone at home and it sounds like AnyConnect is the only way to do this.
It sounds like to me that if I use some type of VPN, I can access the same devices using the same IP whether internal or external with the external connection using the VPN to tunnel the IP to the local network. There seems to be quite a few ways to do this with an ASA 5505.
AnyConnect seems like the way to go but after reading Cisco documentation, it requires your Android device to be root'd if it is not a particular Samsung model. If I understand correctly, root'ing your phone voids the warranty. I know it is common practice but would think Cisco would have a better solution as I am sure Cisco would not want another manufacturer telling their customers to void the warranty on their Cisco equipment in order to get it to work.
I believe I can just use IPSEC and use the native VPN of the Android OS and also tunnel L2TP as the Android supports IPSEC-PSK/L2TP or IPSEC-CRT/L2TP. But will either of these will support the IP phone to the UC320W?
A friend also told me to use NginX to proxy URL's so the URL http://www.fqdn.com/camera1 gets proxy'd to the internal IP of Camera1 and http://www.fqdn.com/camera2 gets proxy'd to Camera2. He says I should be able to store a cookie on the phone and let the phone authenticate to the camera and if the phone cannot, the proxy can authenticate internally to the IP camera over SSL.
I don't know anymore, I am so confused and just want to simplify my life as I am just a small business with me and a couple other employees but I have full-time job and it is not IT/Network Technician, it is only CTO/CEO/CIO/CFO. I don't have hours upon hours to set this up and test and I don't have hours upon hours to manage it. I just need to simplify this and have so that it is a set-it-and-forget-it for 6 months to 1 year and re-evaluate or update. So, if someone suggests IPSEC, I would not know how to configure anyway and you should expect another post. The same for AnyConnect or any of the other suggestions.
Thanks in advance for any advice.

Hi!
1. Set Calculation Mode property of ITEM_5 to Formula.
Formula property:
nvl(:Block_Name.ITEM_1, 0) + nvl(:Block_Name.ITEM_2, 0) + nvl(:Block_Name.ITEM_3, 0) + nvl(:Block_Name.ITEM_4, 0)
OR
Function_Name(Param_1,... Param_N);
Have in view of, that the ITEM_5 data will not be saved in DataBase.
2. When-Validate-Item trigger is usfull when is necessary to store calculated item data in DataBase.
Rename you Post-Query trigger to When-Validate-Item.
Modify trigger: Store calculation result in the variable.
(Don't forget to round variable value!)
Then compare it with ITEM_5. If they are different - :ITEM_5 := var_name.
I prefer the first method.

How to configure sso with SSL step by step

Purpose
In this document, you can learn how to configure SSO with SSL. After user have certificate installed in browser, he can login without input username and password.
Overview
In this document we will demonstrate:
1.     How to configure OHS support SSL
2.     How to Register SSO with SSL
3.     Configure SSO for certificates
Prerequisites
Before start this document, you should have:
1.     Oracle AS 10g infrastructure installed (10.1.2)
2.     OCA installed
Note:
1.     “When you install Oracle infrastructure, please make sure you have select OCA.
2.     How Certificate-Enabled Authentication Works:
a.     The user tries to access a partner application.
b.     The partner application redirects the user to the single sign-on server for authentication. As part of this redirection, the browser sends the user's certificate to the login URL of the server (2a). If it is able to verify the certificate, the server returns the user to the requested application.
c.     The application delivers content. Users whose browsers are configured to prompt for a certificate-store password may only have to present this password once, depending upon how their browser is configured. If they log out and then attempt to access a partner application, the browser passes their certificate to the single sign-on server automatically. This means that they never really log out. To effectively log out, they must close the browser.
Enable SSL on the Single Sign-On Middle Tier
The following steps involve configuring the Oracle HTTP Server. Perform them on the single sign-on middle tier. In doing so, keep the following in mind:
l     You must configure SSL on the computer where the single sign-on middle tier is running.
l     You are configuring one-way SSL.
l     You may enable SSL for simple network encryption; PKI authentication is not required. Note though that you must use a valid wallet and server certificate. The default wallet location is ORACLE_HOME/Apache/Apache/conf/ssl.wlt/default.
1.     Back up the opmn.xml file, found at ORACLE_HOME/opmn/conf
2.     In opmn.xml, change the value for the start-mode parameter to ssl-enabled. This parameter appears in boldface in the xml tag immediately following.
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
</category>
</module-data>
<process-set id="HTTP_Server" numprocs="1"/>
</process-type>
</ias-component>
3.     Update the distributed cluster management database with the change: ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct opmn
4.     Reload the modified opmn configuration file:
ORACLE_HOME/opmn/bin/opmnctl reload
5.     Keep a non-SSL port active. The External Applications portlet communicates with the single sign-on server over a non-SSL port. The HTTP port is enabled by default. If you have not disabled the port, this step requires no action.
6.     Apply the rule mod_rewrite to SSL configuration. This step involves modifying the ssl.conf file on the middle-tier computer. The file is at ORACLE_HOME/Apache/Apache/conf. Back up the file before editing it.
Because the Oracle HTTP Server has to be available over both HTTP and HTTPS, the SSL host must be configured as a virtual host. Add the lines that follow to the SSL Virtual Hosts section of ssl.conf if they are not already there. These lines ensure that the single sign-on login module in OC4J_SECURITY is invoked when a user logs in to the SSL host.
<VirtualHost ssl_host:port>
RewriteEngine on
RewriteOptions inherit
</VirtualHost>
Save and close the file.
7.     Update the distributed cluster management database with the changes:
ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct ohs
8.     Restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl stopproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl startproc process-type=HTTP_Server
9.     Verify that you have enabled the single sign-on middle tier for SSL by trying to access the OracleAS welcome page, using the format https://host:ssl_port.
Reconfigure the Identity Management Infrastructure Database
Change all references of http in single sign-on URLs to https within the identity management infrastructure database. When you change single sign-on URLs in the database, you must also change these URLs in the targets.xml file on the single sign-on middle tier. targets.xml is the configuration file for the various "targets" that Oracle Enterprise Manager monitors. One of these targets is OracleAS Single Sign-On.
1.     Change Single Sign-On URLs
Run the ssocfg script, taking care to enter the command on the computer where the single sign-on middle tier is located. Use the following syntax:
UNIX:
$ORACLE_HOME/sso/bin/ssocfg.sh protocol host ssl_port
Windows:
%ORACLE_HOME%\sso\bin\ssocfg.bat protocol host ssl_port
In this case, protocol is https. (To change back to HTTP, use http.) The parameter host is the host name, or server name, of the Oracle HTTP listener for the single sign-on server.
Here is an example:
ssocfg.sh https login.acme.com 4443
2. Restart OC4J_SECURITY instance and verify the configuration
To determine the correct port number, examine the ssl.conf file. Port 4443 is the port number that the OracleAS installer assigns during installation.
If you run ssocfg successfully, the script returns a status 0. To confirm that you were successful, restart the OC4J_SECURITY instance:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Then try logging in to the single sign-on server at its SSL address:
https://host:ssl_port/pls/orasso/
     3. Back up the file targets.xml:
cp ORACLE_HOME/sysman/emd/targets.xml ORACLE_HOME/sysman/emd/targets.xml.backup
4. Open the file and find the target type oracle_sso_server. Within this target type, locate and edit the three attributes that you passed to ssocfg:
·     HTTPMachine—the server host name
·     HTTPPort—the server port number
·     HTTPProtocol—the server protocol
If, for example, you run ssocfg like this:
ORACLE_HOME/sso/bin/ssocfg.sh http sso.mydomain.com:4443
Update the three attributes this way:
<Property NAME="HTTPMachine" VALUE="sso.mydomain.com"/>
<Property NAME="HTTPPort" VALUE="4443"/>
<Property NAME="HTTPProtocol" VALUE="HTTPS"/>
5.Save and close the file.
6.     Reload the OracleAS console:
     ORACLE_HOME/bin/emctl reload
7. Issue these two commands:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Registering mod_osso
1.     This command sequence that follows shows a mod_osso instance being reregistered with the single sign-on server.
$ORACLE_HOME/sso/bin/ssoreg.sh
     -oracle_home_path $ORACLE_HOME
     -config_mod_osso TRUE
     -mod_osso_url https://myhost.mydomain.com:4443
2.     Restarting the Oracle HTTP Server
After running ssoreg, restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
Configuring the Single Sign-On System for Certificates
1.     Configure policy.properties with the Default Authentication Plugin
Update the DefaultAuthLevel section of the policy.properties file with the correct authentication level for certificate sign-on. This file is at ORACLE_HOME/sso/conf. Set the default authentication level to this value:
DefaultAuthLevel = MediumHighSecurity
Then, in the Authentication plugins section, pair this authentication level with the default authentication plugin:
MediumHighSecurity_AuthPlugin = oracle.security.sso.server.auth.SSOX509CertAuth
2.     Restart the Single Sign-On Middle Tier
After configuring the server, restart the middle tier:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Bringing the SSO Users to OCA User Certificate Request URL
The OCA server reduces the administrative and maintenance cost of provisioning a user certificate. The OCA server achieves this by authenticating users by using OracleAS SSO server authentication. All users who have an Oracle AS SSO server account can directly get a certificate by using the OCA user interface. This reduces the time normoally requidred to provision a certificate by a certificate authority.
The URL for the SSO certificate Request is:
https://<Oracle_HTTP_host>:<oca_ssl_port>/oca/sso_oca_link
You can configure OCA to provide the user certificate request interface URL to SSO server for display whenever SSO is not using a sertificate to authenticate a user. After the OracleAS SSO server authenticates a user, it then display the OCA screen enabling that user to request a certificate.
To link the OCA server to OracleAS SSO server, use the following command:
ocactl linksso
opmnctl stoproc type=oc4j instancename=oca
opmnctl startproc type=oc4j instancename=oca
You also can use ocactl unlinksso to unlink the OCA to SSO.

I have read the SSO admin guide, and performed the steps for enabling SSL on the SSO, and followed the steps to configure mod_osso with virtual host on port 4443 as mentioned in the admin guide.
The case now is that when I call my form (which is developed by forms developer suite 10g and deployed on the forms server which is SSO enabled) , it calls the SSO module on port 7777 using http (the default behaviour).
on a URL that looks like this :
http://myhostname:7777/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
and gives the error :
( Forbidden
You don't have permisission to access /sso/auth on this server at port 7777)
when I manually change the URL to :
https://myhostname:4443/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
the SSO works correctly.
The question is :
How can I change this default behaviour and make it call SSO on port 4443 using https instead ?
Any ideas ?
Thanks in advance

How to configure network virtualization in SCVMM 2012 R2 with two host

hi everyone... can you teach me how i configure networking in my infrastructure..
i am getting confuse that i have 2 phisical server, i don't know to set the netwokring in scvmm. Every best practice, i found in internet is using more than 2 physical server.
i have been tried before with the networking which i want..but it failed...
any one help me please...

This whitepaper should explain the required steps to get this working.
http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
The whitepaper will use more than two hyper-v hosts, but you'll get the picture.
You can have 1 host to run your NVGRE VMs, while the other host should be dedicated to run the virtualization gateway VMs.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

How to configure single web server instance to multiple application servers..

Hi all,
we are running single instance of IWS6.0 SP2 on solaris, we want to comfigure this single instance to multiple application servers(JRun). Can any one advise me whether it is possible to do.
Thanks
Raj

Hi Raj,
"how to configure single web server instance to multiple application servers.."
It's not possible for setting up multiple applicataion servers for Single iWS instance.
Thanks,
Dakshin.

How to configure Oracle jsp engine on OAS4.0.8.1

1. How to configure Oracle jsp engine on OAS4.0.8.1 for linux
2. How to set the parameter on OAS. The Ojsp document only give examples depict the syntax used when running in an Apache/JServ 1.0 environment

Anyone?

How to configure for Multiple XML

Hi,
We were successful in working with single xml as a input. Now we are using multiple xml as a input for a single transaction. With the references and the suggestion in documents(working with xml files.pdf) related to Documaker we have changed configuration settings in FSISYS.INI and AFGJOB.JDT.
Down below we have mentioned those changes.
Input Extract file has been changed as F_Sch.DAT; following is the content in the extract file
COM_LOB_1111 .\INPUT\F_SCH1.xml
COM_LOB_1111 .\INPUT\F_SCH2.xml
COM_LOB_1111 .\INPUT\F_SCH3.xml
F_SCH1.xml,F_SCH2.xml,F_SCH3.xml
<?xml version="1.0"?>
<global>
     <lm>
          <COM>COM</COM>
          <LOB>LOB</LOB>
          <TRANSACTIONID>121212</TRANSACTIONID>
     </lm>
     <Foodcard>
          <Accname>Alex</Accname>
          <Email>[email protected]</Email>
          <Accid>1234123412341234</Accid>
          <Accno>1234123412341234</Accno>
          <Accaddr1>address1</Accaddr1>
          <Accaddr2>address2</Accaddr2>
          <Accaddr3>address3</Accaddr3>
     </Foodcard>
</global>
Changes to FSISYS.INI
< ExtractKeyField >
Key = 1,3
SearchMask = 1,COM_LOB_1111
< TRN_FIELDS >
COM = 1,3,N
LOB = 5,3,N
PolicyNum = 9,3,N
< DATA >
ExtrFile = C:\FAP\DLL\Computer\INPUT\F_Sch.DAT
AFGJOB.JDT
;ImportXMLFile;2;SCH=1,COM_LOB_1111 15,19
Inspite of those changes that made, we were not able to generate the output using three xml as a input.
***error details.***
[04:16:29PM] Warning: Company - LOB - Transaction
[04:16:29PM] Warning: DM17115: : The DownLoadFAP option is set to Yes, this option should be set to No for optimal performance. Check the RunMode control group, DownLoadFAP option.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM12041: : FAP library error: Transaction:<>, area:<DXMLoadXMLRecs>
code1:<48>, code2:<0>
msg:<XML Parse Error: The 1 chars before error=<C>, the 20 chars starting at error=< >>.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM12041: : FAP library error: Transaction:<>, area:<DXMLoadXMLRecs>
code1:<48>, code2:<0>
msg:<syntax error at line 1 column 0>.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM10292: in <RULXMLExtract()>: Unable to <DXMLoadXMLRecs()>.
[04:16:29PM] Warning: Company - LOB - Transaction
[04:16:29PM] Warning: DM13023: in RCBSendToErrBatch(): Unable to assign the transaction to the error batch. The SentToManualBatch field is not defined in the TrnDfdFile.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM10947: in NoGenTrnTransactionProc(): Unable to RULLoadXtrRecs(pRPS).
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12018: in RPDoBaseFormsetRulesForward(): Unable to <WINNOGENTRNTRANSACTIONPROC>().
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12066: in RPProcessOneTransaction(): Unable to RPDoBaseFormsetRulesForward(pRPS, RP_PRE_PROC_A).
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12064: in RPProcessTransactions(): Unable to RPProcessOneTransaction(pRPS). Skipping the rest of the transactions for this Base. See INI group:< GenDataStopOn > option:TransactionErrors.
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12004: in RPProcessOneBase(): Unable to RPProcessTransactions(pRPS).
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12001: in RPProcessBases(): Unable to RPProcessOneBase(pRPS). Skipping the rest of the Bases for this batch run. See INI group:< GenDataStopOn > option:BaseErrors.
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12127: in RPRun(): Unable to RPProcessBases(pRPS).
[04:16:51PM] Error: An error occurred during processing.
Kindly let us know in case of any solution for this issue.
Regards,
Balaji R.

It looks like it is unable to load your XML files. Depending on how your configuration is laid out, you may want to list full path names in your extract file - we make use of the same technique in 11.5, which I would imagine isn't terribly different in this respect from 12.0. Our configuration is such that we run Gendata at one level, read an extract file in the deflib folder, and the input files are in an input folder, so each entry in the extract file is C:\fap\mstrres\sampco\input\input1.xml.
Not sure if that is analogous to your setup or not, but based on the errors, either it can't find the file, so it is a pathing issue, or the file contents are invalid.
Tony

How to configure a 1131 set as WGB to auth via WPA2?

Similar Messages

Maybe you are looking for