How to configure a audit in global zone that will audit all the zone

Hi everyone,
Please i want you guy to help me out on how i can configure an audit for my global zone that we audit all the zones that i have in global zone.
I have a global zone , and i have like four zones under it, so i dont know how to configure a BSM audit for the global zone that we audit for all the zones.
I will appreciate your swift response.
Thanks and Regards.
Ladi

Most of the time each zone is treated as a separate server. This is my experience others might do it differently. All logs can then be sent to a log server and you will know that about the zone errors because the zone has a zone and/or host name. You can also login to the zone and check the logs there as well.
The link below is for book from a guy who is much smarter then me. Read the security chapter.
http://www.c0t0d0s0.org/pages/lksfbook.html

Similar Messages

How do I find a list of printers that will print from the IPad 2?

How do I find a list of printers that will print from the IPad 2?

Those that support AirPrint are listed on this page : http://support.apple.com/kb/HT4356
Some printer manufacturers also have their own apps e.g. HP http://itunes.apple.com/us/app/hp-eprint-home-biz/id299531647?mt=8
And there are third-party apps which work with some printers e.g. Print Central For iPad and Print n Share

How do I create a simple launcher VI that will end when the new VI is started?

I've just recently upgraded to Labview 7 and I'm writing a complex set of programs that are related, but do not need to be running simultaneously. I would like to write a simple launcher program that will load the appropriate VI and close itself after doing so. I understand how to call a subVI and have its front panel open upon execution, but I'd rather keep the VI's seperate.
Thanks for any help in advance.
-Warren

Try the attached example. Be careful though - if you make changes to this VI, make sure you save it before you run it, as it closes itself, and you will loose any unsaved changes...
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.
Attachments:
Splash_Screen_and_Launcher.vi ‏54 KB

Need to find out how to lock a point in a path that will not allow the rest of the path to rotate or move around it

Hello,
I am having some trouble with using shape layers and paths to create a solid, flat 'hair' effect in a cartoon animation.
I have used a semicircle shape layer as the hair on the head itself and then a path with a stroke of the same width as the semi circle to be the long part of the hair.
Unfortunately when I move/rotate the bottom point in the path it causes gaps to appear further up where the stroke is rotating around the point at which the stroke is supposed to "connect" to the semi circle.
I have included a couple of screenshots of me rotating the hair opposite ways so you can see.
- imgur: the simple image sharer
- imgur: the simple image sharer
I need to find out if there is a way to lock the top point in place where it joins the semi circle blond hair which will stop this part from moving at all, even rotating around the point.
But the bottom needs to move freely and obviously the part between the two points will move fairly naturally.
If you can imagine how a girl with long hair has her hair attached to her head, it does not move at all, but the bottom moves freely. It needs to be like this.
If you can provide any assistance it would be greatly appreciated.
Thanks!

That is perfect thank you so much!
Can't believe I didn't think of that but you da real MVP!

How to make a java program that will give you the list of files in the dir

How can you make a program in java that will list all the files in a directory with out useing the File,FileWriter,FileReader,InputStreamReader,FileInputStream,RandomAccessFile etc. classes

What is with these instructors? So far today I have
seen
Do something 100 times, but don't use a loop
Format numbers, but don't use NumberFormat
and now this.
What are these people trying to teach?
Java??? I don't think so.Perhaps it is because these instructors are learning Java at the same time as their students. They are only one chapter ahead of the students. :(

How to configure Mail app on mountain lion to not download all my emails in hotmail server. I need only just 1-2 weeks

How to configure Mail app on mountain lion to not download all my emails in hotmail server. I need only just 1-2 weeks

Try going to the web based site and see if you can set up a temporary folder there. Move anything you don't want to download to that folder.

How to configure IIS webserver with weblogic so that I can invoke servlets without the .wlforward extension

How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter and .wlforward
has also been
included as a special file type. However this requires me to key-in ".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

I am able to invoke the servlet without the wlforward extension now.
However, now I am required to add /weblogic before the servlet
name otherwise it does not execute the pathtrim property.
I have tried with the pathprepend thing also.
Can we get rid of the /weblogic part also. I just want to execute
my servlet as http://iis/myServlet.
Your help in this regard is greatly appreciated...
Thanks..
"Rishi" <[email protected]> wrote:
>
Thanks for the reply Kumar.
I did follow the instructions as given in the Weblogic documentation
The documentation said to add iisforward.dll as a filter service
and register .wlforward as a special
file type to be handled by iisproxy.dll. For this,
while configuring the IIS server in the Home Directory tab
I added an extension ".wlforward" and the executable as
iisproxy.dll. Is this the way it should have been done...
I also modified the iisproxy.ini file as per the documentation.
I have added the WLForwardPath property and set it to /weblogic.
My server works fine when I give the url as
http://iis/myServlet.wlforward
but it does not work for
http://iis/myServlet and this is the way i'd want it to work.
Please tell me if I am missing something on the configuration part
and if there is something special that needs to be done. I shall
be grateful to you.
Kumar Allamraju <[email protected]> wrote:
http://e-docs.bea.com/wls/docs61/adminguide/isapi.html#101184
Rishi wrote:
How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter
and
.wlforward
has also been
included as a special file type. However this requires me to key-in".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

How do I setup my Airport Extreme so that I can extend the coverage of my existing AT&T wifi network?

How do I setup my Airport Extreme so that I can extend the coverage of my existing AT&T wifi network?

Start by establishing a permanent fixed Ethernet cable connection from one of the available LAN <-> ports on the ATT modem/router to the WAN "O" port on the AirPort Extreme.
Ethernet cabling can be run up to 300+ feet or 100 meters, so you should be able to locate the AirPort Extreme exactly where it will be needed to provide more wireless signal coverage.
Configure the AirPort Extreme to "create" a wireless network using exactly the same wireless network name, same wireless security setting, and same wireless network password that the ATT wireless is using.
The final step is to insure that the AirPort Extreme is configured to operate in Bridge Mode, so it will work correctly with the ATT modem/router.
If you need more specific steps, we need to know what operating system you are using on your Mac or PC. If you have a Mac and do not know which operating system it is using.....click the Apple icon in the upper left corner of the screen and then click About This Mac, and post back with the OS X version number that you see there.

How can I delete an app from launchpad, that doesn't have the little cross in the left top corner. The app isn't an App Store app. The application is also not present anymore in my application's folder in finder.

How can I delete an app from launchpad, that doesn't have the little cross in the left top corner. The app isn't an App Store app. The application is also not present anymore in my application's folder in finder.
I tried to use the attached command through TERMINAL :
sqlite3 ~/Library/Application\ Support/Dock/*.db "DELETE from apps WHERE title='Help';" && killall Dock
sqlite3: Error: too many options: "DELETE from apps WHERE title='Help';"
Use -help for a list of options.
But i didn't work as I got the above error message.
best regards
Jeroen

I'm in the same boat as you -- except that I manage both a school lab (volunteer job) and macs in the enterprise (pay job). What I think we need is the Education Volume Purchasing Program
http://www.apple.com/education/volume-purchase-program/faq.html
Unfortunately this all seems a little rough around the edges -- for example, I have found updates for AppStore apps on the support.apple.com updates download site, but then when I install them via ARD they don't actually update the software. (The AppStore icons still show as needing the updates, and the version info reports the old version.) The documentation is also vague about which AppleID to use in which circumstance. I think they just haven't finished thinking through the implications of the various procedures and policies upon the various kinds of customers. When we deployed Mountain Lion on the school lab, we made an install usb and went around and installed it on each computer -- and it appears that you are on the honor system as far as paying for all of the licenses that you install. We did! But they appear to have no way to enforce it.
So far, I have only deployed 9 Lion macs in my day job, and our "solution" to the AppStore showing updates problem has been to drag the AppStore icon off of the users' docks so they don't see them!

Help - I have an apple id account, where is my iPod and iPad registered, but also the iPod of my daughter. How can I make an account for my daughter and keep all the apps she has on her iPod?

Help - I have an apple id account, where is my iPod and iPad registered, but also the iPod of my daughter. How can I make an account for my daughter and keep all the apps she has on her iPod and in her own iTunes?

Sorry, content bought with one Apple ID cannot be merged or transferred to another Apple ID.

HT201269 when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resett

when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resetting it?

What version of iTunes are you running on your computer? You need to update to the current version.

How can i get a pdf from my iPhone to my new macbook? I keep trying to sync but it says it will delete all the books/pdfs on my phone. I don't have this pdf on my computer and don't want to lose it. Help please!

How can i get a pdf from my iPhone to my new macbook? I keep trying to sync but it says it will delete all the books/pdfs on my phone. I don't have this pdf on my computer and don't want to lose it. I am using the same iTunes account. Any suggestions?

Hello ashlyn888,
Based on your post it sounds like you would like to sync your iBooks content with your computer. I have located an article that may help you in this situation. While you can sync this data with your computer you can also use the sharing button to send PDFs using various sources:
iBooks: Viewing, syncing, saving, and printing PDFs on iPhone, iPad, and iPod touch - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

How can I create a group of 5x3 buttons with a drop down meny that will slide down the 5 boxes beneath in Muse?

I am making a porfoliosite in Muse, and want to show 5 x 3 thumbnails of my work that you can click on to see more of the same work. When you click I want a drop down box that will slide down the boxes beneath. Like on this page: http://rajoon.com/. Anyone that know how?

Have you considered using CSS styled text/list menus instead of image rollovers. It isn't hard really and it's actually a much better choice for web accessibility and for search engines to find and follow your links. Here are some links to several CSS menu systems you can try:
CSS Express Drop-Down Menus (tutorial)
http://www.projectseven.com/tutorials/navigation/auto_hide/
CSS Tab Designer creates 60+ CSS Styled Button and Tab Menus (download)
http://www.highdots.com/css-tab-designer/
List-O-Rama (DW Extension)
http://www.dmxzone.com/go?5618
CSS Menu Maker (On-Line Menu Generator)
http://www.cssmenumaker.com/
Pop-Menu Magic2 by PVII (DW extension purchase)
http://www.projectseven.com/products/menusystems/pmm2/index.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

How can i change a video clip format that will play on a PC to play on my MAC

How can i change a video clip format that will play on a PC to play on my MAC

http://www.flip4mac.com/ supports all but DRM formatted Windows video. http://www.videolan.org/ and MPEG4Streamclip may support additional. DRM Windows video may require running Windows natively on your Mac. Or requesting the source give you an MPEG4 compatible format or Realplayer formatted file. Running Windows is described here: https://discussions.apple.com/docs/DOC-2741

I recently purchased songs from itunes via my pc and I dont know how to get them onto my iphone? When I click the sync button it says I will lose all the music currently on my iphone.. Help :(

I recently purchased songs from itunes via my pc and I dont know how to get them onto my iphone? When I click the sync button it says I will lose all the music currently on my iphone.. Help

If you're syncing with a different iTunes library than the one you previously synced with, then there is no way around it. You're gonna loose the old data. The only way round it would be to make sure that all the music files on your iPhone is also in your iTunes library. If you still have access to the computer with the old library, you could copy the files on to an external harddrive, and then import them into your new iTunes library.
If it is in fact the same library, then the music currently on your iphone, is also in your itunes library. Just make sure that the artists/albums/playlists, or whatever you sync contains these tracks, that you allready have on your phone and don't want deleted. What i do is, i create a playlist specifically for my iPhone, and i set it up to only sync with this playlist. Whenever i hear a track from my iTunes library or buy a new track that i want on my phone, i just drag it to this playlist and next time i synchronize, it's there without deleting anything else.

How to configure a audit in global zone that will audit all the zone

Similar Messages

Maybe you are looking for