How to configure a Cisco 3560 with MAC-based 802.1x authentication by radius server
Hi dearI
How can I configure a Cisco 3560 to authenticate a client based on its mac address with 802.1x and radius server. Many tanks in advance!
Olivier,
You can't reference WLP visitor roles in weblogic.xml, but you can
reference global roles (created using the WLS console):
- <security-role-assignment>
<role-name>PortalSystemAdministrator</role-name>
<externally-defined />
</security-role-assignment>
-Phil
"Olivier" <[email protected]> wrote in message
news:[email protected]..
>
We need to have login page to our portal app.
When using "form based" authentication is it possible to map the securityon a
"entitlement role" ?
Our need is to be abled to give direct url acces to some pages of theportal (for
exemple by sending urls like"http://server/appcontextpath/appmanager/myportal/mydesktop?_nfpb=true&_page
Label=mypage")"
by email to portal users) and need a simple mecanism of authenticationbefore
redirecting to the portal page.
Inste
Similar Messages
-
How to configure dot1x to check for mac address then to send to radius
hi,
is there any way on a switch to get a port to check a list of mac addresses then if the pc is not in that list send the request to a radius server. the radius we use is steelbelt radius.
cheers
tonyHi,
It looks you are looking for the mac authentication bypass (MAB) feature.
Please take a look at the feature in detail:
http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst3750/software/release/12.2_52_se/configuration/guide/sw8021x.html#wp1205506.
You can authenticate devices based on MAC address.
Here is a step guide to configure it on older IOS releases:
http://preview.cisco.com/en/US/docs/solutions/Enterprise/Campus/IBD/MACAuthB.html.
12.2(50) and later IOS:
http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst3750/software/release/12.2_52_se/configuration/guide/sw8021x.html#wp1196845.
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it. -
How to configure the .ini file with applet
hai
i am using native methods in that methods they use some ip addresses. when i am using that native methods in applet run the applet using appletviewer tool it works fine but when i am open that applet using html page browser not configure that .ini file data .how to configure that .ini file with browserHi Jay SenSharma,
Thanks for your immediate response.
I saw your URL links, But in your link give the recursive deployment using wlst. But my question is how to configure the oracle weblogic library files into Admin server & Managed Servers by using the wls.jar file through wlst script to create the new domain.
But if create the new domain by using GUI mode then we manually give the admin server port number & managed servers port number and name.
By default the library files are configured with the Admin server in GUI mode. But the Managed server the Library files are not configured with the Managed servers. Then we manually select all the library files to the corresponding managed servers. Then only the applications are deployed into the corresponding managed server.
Regards,
S.vinoth Babu -
How to configure the wifi access with specific time slot for kids?
how to configure the wifi access with specific time slot for kids?
Which model of AirPort base station do you have? Which version of OS X is your MacBook Pro running?
Wi-Fi access can be limited using the Timed Access feature of the AirPort routers. You would do so using the AirPort Utility. -
How to configure Ogone for working with business catalyst ?
How to configure Ogone for working with business catalyst ?
In france ogone seems to be the only solution for seamless payment and there's no explications on the forum to configure it.
Thx for your answersHi ,
[Configuration Guide SAP adapter for SAP Quality Center by HP|https://websmp101.sap-ag.de/~sapdownload/011000358700000612662007E/Adapter_Configuration_.pdf] might be useful.
Check [Master guide|https://websmp201.sap-ag.de/~sapdownload/011000358700000612672007E/Adapter_Master_Guide.pdf] also.
Regards
Naveen
Edited by: Naveen kumar Palanichamy on Feb 19, 2009 6:38 AM -
How to get vlan tag programe with mac book air
how to get vlan tag programe with mac book air,i'm using the usb ethernet adapter
For prompt help contact TATA.
For more on this: https://discussions.apple.com/thread/3680625?tstart=270 -
How can I use Pegasus R6 with Mac mini?
I bought Pegasus R6 (Promise Technology, Inc). I connected to my Mac mini. But Pegasus R6 did not appear on desktop. In order to use Pegasus, MacBook Pro?iMac must have MacBook Pro EFI Firmware Update installed. But Mac mini does not have EFI Firmware Update. How can I use Pegasus R6 with Mac mini?
Does your Mac Mini have thunderbolt?
-
How to configure Exchange 2013 OWA with Single Sign On
Hi All ,
How to configure Exchange 2013 OWA with Single Sign On ?
Thanks .Hi,
From your description, I am not quite sure what you really want to achieve. Could you explain it furthermore? If you need to set up Exchange 2013 OWA single sign on with Exchange 2010, here is a helpful thread for your reference.
Exchange 2013 OWA Single Sign on with Exchange 2010
https://social.technet.microsoft.com/Forums/en-US/2899ebfc-8622-4cdc-8d77-d76b607618f7/exchange-2013-owa-single-sign-on-with-exchange-2010?forum=exchangesvrdeploy
If that is not your case, please feel free to tell me.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support -
How to configure wireless Cisco 1041/EAP2 with Radius
Hello,
Having trouble configuring wireless on a Cisco 1041 with a 2012 Radius Server
I have a cisco ASA 5505 and Windows server 2012 Radius with NAP and Network Security policy
Guest Test guest works, test does not, I want the users to log into test with their AD credentials
Here is the AP config:
Thanks for any help
o service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap1
logging rate-limit console 9
aaa new-model
aaa group server radius rad_eap
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa group server radius rad_eap2
server x.x.x.x auth-port 1645 acct-port 1646
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authentication login eap_methods2 group rad_eap2
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
clock timezone -0500 -5
clock summer-time -0400 recurring
ip domain name ser.local
dot11 syslog
dot11 ssid test
vlan 1
authentication open eap eap_methods2
authentication network-eap eap_methods2
authentication key-management wpa
mbssid guest-mode
dot11 ssid test guest
vlan 12
authentication open
authentication key-management wpa
mbssid guest-mode
wpa-psk ascii 7
dot11 priority-map avvid
dot11 phone dot11e
power inline negotiation injector 001b.8fac.990a
power inline negotiation prestandard source
class-map match-all _class_data_policy0
match ip dscp default
class-map match-all _class_voice_policy0
match ip dscp ef
policy-map voice_policy
class _class_voice_policy0
set cos 6
policy-map data_policy
class _class_data_policy0
set cos 0
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 1 mode ciphers aes-ccm
encryption vlan 12 mode ciphers aes-ccm
ssid ihiCorp
ssid ihiGuest
antenna gain 0
mbssid
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
service-policy input data_policy
service-policy output data_policy
interface Dot11Radio0.12
encapsulation dot1Q 12
no ip route-cache
bridge-group 12
bridge-group 12 subscriber-loop-control
bridge-group 12 block-unknown-source
no bridge-group 12 source-learning
no bridge-group 12 unicast-flooding
bridge-group 12 spanning-disabled
service-policy input data_policy
service-policy output data_policy
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
no keepalive
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface GigabitEthernet0.12
encapsulation dot1Q 12
no ip route-cache
bridge-group 12
no bridge-group 12 source-learning
bridge-group 12 spanning-disabled
interface BVI1
ip address x.x.x.x 255.255.255.0
no ip route-cache
ip default-gateway x.x.x.x
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
radius-server attribute 32 include-in-access-req format %h
radius-server host x.x.x.x auth-port 1645 acct-port 1646 key 7
radius-server vsa send accounting
bridge 1 route ip
line con 0
line vty 0 4
endin order I get these messages;
The processing of Group Policy failed. Windows attempted to read the file \\test.local\sysvol\test.local\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
A LDAP connection with domain controller IHIserver01.ihi-press.local for domain TEST is established.
A fatal alert was received from the remote endpoint. The TLS protocol defined fatal alert code is 48. -
Cisco 3560 and how to mac based 802.1x authentification
Hi dearI
How is it possible to authenticate a client based on its mac address with 802.1x and radius server. Many tanks in advance!Hi dearI
How is it possible to authenticate a client based on its mac address with 802.1x and radius server. Many tanks in advance! -
How to configure iTunes for travel with an iPhone?
While I keep iTunes and iPhone on my primary iMac, I'm going to be doing some travel and will need to make adjustments for keeping my iPhone backed up on a new MacBook Pro I'll be taking with me. I do not want to add any songs from my current iTunes library or pictures from iPhoto to the MacBook Pro as these are both already on my iPhone.
However, I need to know how to configure iTunes on the MacBook Pro with just a bare installation so I can keep my iPhone apps in it and make a backup every night, but not lose the pictures and music currently on the iPhone. IOW, I want the iPhone to remain unchanged (keeping the pictures and songs), but simply backup only the apps each night when I plug it in. I'll unplug it after the backup and use a regular charger and switch users on the MBP so my wife can do the same with her iPhone.
The only reason for doing this is insurance while traveling that if we need to restore our apps for any reason on either phone, we'll have the backup on the MBP. I'm concerned that if I uncheck photos and music on the MBP iTunes sync area, I'll lose them both on the iPhone until I return home and sync again with the primary iMac. Thanks for any tips.The accelerometer on the iPhone is designed to respond to normal gravity forces on the surface of the Earth. However, I have found that the behavior of the accelerometer changes dramatically under other gravitational conditions.
For a great laugh, if you take someone who has just bought an iPhone to a higher-gravity environment, Jupiter for example, and ask them to rotate their iPhone while using Safari, the overloaded springs in the accelerometer will only sluggishly switch the screen from vertical to horizontal.
Their expression will say it all: "wait a second, I just bought this thing, and you're telling me it doesn't just snap to horizontal like in the commerciall??!!"
"Relax, dude, you're on Jupiter! It works great on Earth."
It's a hilarious gag. Gets them every time.
To really mess with someone's head... I took a buddy of mine to the event horizon of a supermassive black hole where the gravity waves were so great the accelerometer was completely overhwelmed and unresponsive. The screen simply would not change from vertical to horizontal no matter how long you waited. Well! You should have seen my buddy's face. He had bought the iPhone the day before and was just about ready to return it even if it meant swallowing the restocking fee!!! It was hilarious.
G5 Quad + Logic 7.2.3 + FireFace 800 Mac OS X (10.4.10) -
Help or ideas how to configure two cisco 1230 ap-s acting like bridges
Hello ya´ll
Need help with configuration of two cisco 1230 ap-s, which are acting as bridges today. Idea is to configure an 4506 (EIGRP) with two new VLAN-s, "hide" those in 2 VRF-s and send those thru one of the ap-s via radio link (a). Distance between is about 700 feet. On the other side an 3560 is acting as L3 device so VRF is needed on 3560 to. Post your thoughts and ideas. Thank´s in advance.Hi Bernard,
If you have WCS, you can use templates to synchronize your configurations on the WLCs.
Another possibility is you can upload your current configuration from your production WLC, and then open up the configuration file and edit the IP addresses to give new addresses to the new WLC. You will also want to change the system name to be unique as well. You can then download this config onto the new WLC, as long as the IP addresses and system name are different it should not interfere with your current WLC.
To have the WLCs operate together properly, you will want to make sure they are defined in a mobility group, see the following for instructions:
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70mobil.html
-Patrick Croak
Wireless TAC -
How to configure one TREX host with multiple index servers ?
Hi All,
Does anyone know how to configure TREX on the one host,
with multiple index servers ?
Reason for this is to make better use of resources available on the host server(4 Gig, 4 Processor, Windows2003), to improve the search performance of
our KM content for portal users.
I am using TREX 7 and have not been able to do this,
despite reading the Single and Distributed install
documentation.
Any help would be appreciated.
Regards,
AndresHi Andres,
To make use of the RAM a Server provides you have to run two indexserver processes (each can then consume 2 GB);
Proceed like this:
1. Go to TREXdeamon.ini; check if section [indexserver2] is there (it is already provided, but not active in standard installation)
2. In TREXdeamon.ini go to
[daemon]
references sections below
programs=nameserver,preprocessor1,indexserver1,queueserver,alertserver
and add indexserver2 here. Restart TREX; second porcess is then started; can be checked in TREX monitor in Portal as well
3. To distribute existing indexes to the new process, start TREXadmintool and go to Index: Landscape
Go to the last two columns and move the indexes (move master here/secondary mouse click)
If you don't distribute the indexes the new index server process will be regarded when an new index is created.
Hope this helps!
cheers
Bettina -
How to Configure and Integrate EP with CRM
Hi Everybody,
I want to integrate EP with CRM.
I am using SAP WAS Server.I have installed Portal.
I downloaded CRM Business packages.
1)How to integrate and configure in the EP with SAP R/3(CRM Module).
2)What are the prerequisities.
Plaese prove the exact help and documents.Hello,
I think this <a href="http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N12_Scen_InstallGuide_EN_US.doc">Scenario Installation Guide</a> from the <a href="http://help.sap.com/bp_epv260/EP_EN/index.htm">SAP Best Practices for Enterprise Portal V2.60</a> can help you.
Regards
Gregor -
How to configure for GPlus Adapter with SAP Phone and SAP CRM
Hi All Basis Adm,
Please consider as an urgent basis i need the information that how to configure GPlus Adapter with SAP Phone and SAP CRM . My server is CRM 5.0 (kernel 7) with Oracle Database. This information is require to connect Webclient to Sap Phone with GPlus Adapter (Genesys Adapter 7.1). If u have any document regarding mentioned above than that will be acceptable.
Regds,
GovindaHi Prasad,
In you case, it's a file to file scenario.
Go thro' this link for a solution:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Regards.
Praveen
Maybe you are looking for
-
Showing User ID in Error Message
Fellow Developers, I am trying to Include the User ID in an error message. I want the message to say "Payment Advice in use by XXXXXXX". In SE91 if I enter a "&" it spits out the company code and says "Payment Advice in use by Z200" (The company cod
-
Hello Final Cut community! I'm trying to create a DVD for a friend of mine. I'm editing it in Final Cut Pro and its about 30 minutes long. My question is: How do I create a 30 min video in Final Cut Pro 7 so that it will be able to fit on a standard
-
SImple URL to map to full Streaming Portal URL
After I have created my portal in workshop, I have a .portal file. Using the portal administrator, I have created a portal and a desktop. To access my portal I use an URL of the form: http://host:port/PortalProjectName/PartialPortalURL/DesktopURL MY
-
Dear All, We have done the entry in J1IN, and also done the update in J1I5, Using classification RMA & also done the Extract J2I5. But Still it is not getting updated in the Registers. Kindly guide me . What are the classification to be done for Upda
-
Changing the number keys to lower case
how can I change the number keys on my air book so that I don't have to use upper case and use all the &,",' on the upper case?