How to configure a pop up message when creating an appraisal?

Hi All,
I have a question.
When the supervisor creates an appraisal for an employee, the supervisor is obligated to create Objectives for the employee but creating Competencies are only optional for executives (people group). When the supervisor has finished creating the appraisal and wants to review it, he will need to click on a Continue button.
When the continue button is pressed, a warning pop up message will appear if the competencies created was null. As it is only a warning pop up message the supervisor can just click ok and continue to the review page.
Now I am needed to configure this pop up message for the appraisal creation page and I would like to know how do I go about in searching for it? Should it be in the OAF java files or is the pop up message can be configured using personalization? I just want to know how to search for the configuration of this pop up message. Thank you
regards,
Ilham

Hi Sheela,
Though you made 'Dataline' field as mandatory, system will throw an error message and will put MOUSE CURSOR on that missing field. So ultimately user would come to know that a particular field is missing.
And in SAP there would be lots of mandatory fields and it's really not feasible to put pop-up messages for such requirements and that too in transactions like CMR.
Tell user that system will automatically put MOUSE CURSOR on a particular mandatory field anytime anybody misses to maintain it. As a SAP consultant, your job is to convince the user with such standard functions.
If at all you want to put pop-up message for it, then you need to go for User Exit development.
Revert back if any further issue.
Regards,
Anup

Similar Messages

How to Configure a Pop Up Message in Sales Orders

Hi,
How can I display a message when creating or changing sales orders? I need the configuration steps for 4.6.
Thanks,
Sai.

Hi,
First you need to make an entry of your pop up message in the sales text view of the material master and when the user enters that material, he will be able to see that message. The Config part is in spro/sd/basic func/text control. You need to define the text types, access sequences and the text determ procedures.
You have to maintain the desired text in the material master sales text editor and turn on the indicator 'Display texts during transfer' under Text control in configuration for the sales order-item for the material sales text. This will display a Pop-up message when booking orders
Reward points if found helpfull...
Cheers,
Siva.

Pop up message when saving document with document set

Hi
I want to display a pop up message when a user saves a document of a particular Content Type in a document set.
How can this be done ?
Thanks

Hi,
According to your post, my understanding is that you wanted to pop up a message when saving document.
To achieve it, you should custom the edit form page.
You can use the SharePoint Designer
to customize the behavior of the "save" button.
You should add the "onclick" method to the submit button, and put your JavaScript there.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9d830f96-693a-438d-a5c8-005d1e86b578/how-to-show-a-popup-box-before-saving-properties-for-a-document-in-document-library?forum=sharepointdevelopmentlegacy
You can also use the event receiver, when the files have been uploaded or edited to call the event receiver to open a pop up dialog.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Hello, I have a Mac OS X, and can't seem to install the creative cloud, I get this pop-up message when I try Er is geen programma ingesteld om de URL 'aam://?passPhrase=QDdPo8BTHv975B1B1f0x3anMggUxp4allBf lsm629RgGXV22ocIlQfI9TMW5vkteaQquFNIFB1uDwU18Z268e

Hello, I have a Mac OS X, and can't seem to install the creative cloud, I get this pop-up message when I try
Er is geen programma ingesteld om de URL 'aam://?passPhrase=QDdPo8BTHv975B1B1f0x3anMggUxp4allBf lsm629RgGXV22ocIlQfI9TMW5vkteaQquFNIFB1uDwU18Z268e69Er6M8XCttQjvdYYdLJ9biyCRQF931 MyMPR0rGvrenZ0e2iougs4l9mlOAHDsfQEDOaqfVInflnZ9 FZSMc=' te openen.
So basically it said that I don't have a program to open it? I already had a trial version on my mac, but deleted it..

YasmineH your web browser is blocking the installation of the AAM Detect plug-in. I would recommend using a different web browser or installing through the Creative Cloud Desktop application. You can find additional details on how to install the Adobe Creative applications included with your membership at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

How to get a pop up message in the portal??

Hi experts,
I am implementing the Objective setting and appraisals and I am trying to display a pop up message when they press the review button.
Does anyone have the code for this because it is not working as it does in R/3.
( I have succesfully made error messages but I need a pop up with yes or no)!!
Thanks,

Hi, try by doing a custom html page based on the page you're using for Performance Mgmt, then add the html+javascript code for a popup display through SE80.
Regards

How do I fix -50 error message when syncing phoneon Windows 7?

How do I fix -50 error message when syncing phone on Windows 7?

Quit Mail. Back up all data.
Triple-click the line of text below to select it, then copy to the Clipboard:
/Library/Mail/Bundles
In the Finder, select Go ▹ Go to Folder from the menu bar. Paste into the box that opens, then press return.
A folder may open. If it does, move the following item in that folder to the Trash:
UnsubMailPluginMailAppOSX.mailbundle
You may be prompted for your password when you do this.
Launch Mail.

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

Screenshot of how it looks when i try to show a ms access form inside a iframe:
http://oi58.tinypic.com/2vj4ish.jpg

How do you deal with error message when downloading movie on iPad? It was 75% complete.

How do you deal with error message when downloading movie on iPad2. Movie was 75% complete.

I was using wifi. It shows as a purchase on iTunes but it does not show up on iTunes for download. I keep getting the download error with our a number attached on the iPad. Very frustrating. Apple has been of no help at all.

HT4890 How come I keep getting this message when I turn on my computer: 'photo stream has stopped working.' my pictures aren't saving on the cloud!

How come I keep getting this message when I turn on my computer: 'photo stream has stopped working.' My pictures aren't being saved from my iphone to my computer. I have wifi enabled on my iphone. Thanks for your help.

Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
You can get it from here, but you are better off using K-Meleon (derived from Firefox) or Opera instead an old version of Firefox:
[ftp://ftp.mozilla.org/pub/firefox/releases/2.0.0.20/win32/en-US/]
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz. 3.5 and later supposedly doesn't work.
http://sourceforge.net/projects/kernelex/

"insufficient RAM to fill" message when creating panoramas - 16 GB on my computer?[was: RAM]

Why am I getting "insufficient RAM to fill" message when creating panoramas when I have 16 GB on my computer?

You don't say which version of PSE or which operating system, but except for PSE 12/mac, all versions of PSE are 32 bit programs, which means they can only use a maximum of about 3 GB of ram, no matter how much you have in your system. You can try going to the editor>preferences>performance and upping the percentage available for PSE.

How to avoid shut down BPELPM Server when creating a user?

Hi,
How to avoid shut down BPELPM Server when creating a JAZN user and after doing changes to user-properties.xml?
Thanks,
Jorge

this configuration is only supported on a midtier - there is a work around for a standalone install, nevertheless I would not recommend this for production ..
if this is NOT a production enviroment - I can try to get you the information .
/clemens

How do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it when you just play a slideshow.

how do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it with presets when you just play a slideshow, but i don't see an option to randomly shuffle the slide order when you create a new slideshow. i know you can sort it by different fields, but i want it to be random. thanks.

If you want to rearrange images in random order you can try an AppleScript:
retrieve a list of selected images from Aperture
shuffe the list properly
create an album in Aperture and add the images from the list to the album (make sure that the album set to be orederd manually)
Here is a sample script that shuffles the selected images and displays them in random order in Full Screen Mode:
on removeItem(ims, i)
-- remove the item at position "i" from a list ims
          if ims is {} then return {}
          if (length of ims is 1) then return {}
          if i < 2 then return rest of ims
          if (i = length of ims) then return (items 1 thru (i - 1) of ims)
          if i > (length of ims) then return ims -- should be error?
          return (items 1 thru (i - 1) of ims) & (items (i + 1) thru (length of ims) of ims)
end removeItem
on shuffle_items(ims)
-- shuffle the items of the list "ims" randomly
          local numitems, ims_shuffled, nextrest, nextpick, i
          set numitems to length of ims
          if length of ims < 2 then return ims
          set ims_shuffled to {}
          set nextrest to ims
          repeat until nextrest is {}
                    set i to (random number (numitems - 1)) + 1
                    set nextpick to item i of nextrest
                    set beginning of ims_shuffled to nextpick
                    set numitems to numitems - 1
                    set nextrest to removeItem(nextrest, i)
          end repeat
          return ims_shuffled
end shuffle_items
on shuffleIms()
-- retrieve the selected images from Aperture
-- and display them in random order in full screen mode
          local imageSel, shuffled, i
          tell application "Aperture"
activate
                    set imageSel to (get selection)
                    set shuffled to my shuffle_items(imageSel)
                    set fullscreen to true
                    if imageSel is {} then error "Please select some images."
                    repeat with i from 1 to count of shuffled
                              reveal {item i of shuffled}
delay 3 -- chnage that to the time you want
                    end repeat
                    set fullscreen to false
                    return shuffled
          end tell
end shuffleIms
shuffleIms()
Some more code snippets to go from here:
To create an album:
                    tell library 1
                              if not (exists album "shuffledAlbum") then
make new album with properties {name:"shuffledAlbum", image version:shuffled}
                              end if
                    end tell
And to add the images from the shuffled list to the album:
                    repeat with i from 1 to count of shuffled
                              duplicate item i of shuffled to album "shuffledAlbum"
                    end repeat
Regards
Léonie

Pop up warning when creating policy domain in OAM 10g

Has anyone seen below pop up warning when creating a policy domain in OAM 10g Policy manager?
Warning:
This policy domain controls the access to the URI you are currently accessing
/access/oblix/apps/policyservcenter/bin/policyservcenter.cgi
Are you sure you want to commit these changes?

Hi,
Does Note 842378.1 look like a match for you? Maybe the obcompounddata attribute is missing for some odd reason.
Regards,
Colin

How to configure wokflow for MRP generated & manually created PR

Dear Gurus,
I have to customize SAP workflow for releasing Purchase requisitions. I will be using enhancement M06B0001 for my own role resolution.
I have some questions regarding workflow
1) How to configure workflow for MRP generated & manually created PR?What are the steps? what are the limitations in doing so?
2) Since we are facing the problem of insufficient user license ,How to send notifications to NON SAP users?(We have thought of creating a Z table for the same)
Looking forward to your reply,
Thanks in advance,
Best regards
Tushar
SAP MM Consultant

Dear Mike,
Thanks for your reply, & sorry for not responding on time.
Here are my constraints:
1) Not a single component of HR module will be implemented.(Project management decision:-()
2) Number of user licenses are less, considering the workflow users.(Hence we have thought of creating Z table for employee nos. & EMAIL IDs ,& this table will be accessed by using M06B0001 user exit.(It is still in development phase. Truely speaking, dont know whether it will work or not).If this works out ,then I believe, record from SU01 will not be used (Please correct me here).
3)We have 2 instances on development server.(in short,2 separate installations on same server by creating additional instance). What are the implications of this particular system landscape on workflow? Whether workflow will work or not??:-(, :-(.
The reason I asked you 3rd question is , As soon as 2 nd instance was created on development server, Short Dumps are coming while running transactions of Workflow builder.(SWDD & PFTC).It is giving error" Table is unknown or does not exist". Description of error says"The current program"SAPLSWF3 had to be terminated because one of the statements could not be executed."
"An SAP Open SQL Statement contains a table that does not exist in the database or is not listed in the ABAP Data dictionary.The Table is "SWF_WFPDSC" or another table is accessed in the statement.
Program=SAPLSWF3
Include=LSWF3U05
Row=22
Module name=SWF_WFP_REPOSITORY_CONTENT_GET
The same dump is coming while accessing SWF_WFPVW table from SE16.
Request to Mike & all of you, help me in this regard.
Thanks in Advance,
Regards,
Tushar

How enter the values in to table when create entries option is not working

hi everyone,
can u please tell me How enter the values in to table when create entries option is not working.
it's urgent.
thanking u all

Hi Shree,
how many entries u want to insert ,,
is it a ztable or custom table ..
just tell me ur clear requirement ..
clarify the same ..
if no options avaliable then if its less entries or some value u can do it through debugging ..
if its bulk entries then u can write a program ..
just let me know ..
regards,
VIjay

How to configure a pop up message when creating an appraisal?

Similar Messages

Maybe you are looking for