How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server.
How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server With Oracle 11g R2.
How many database will play in this role.
Best,
hello
I was going through your post and i am also doing the same thing here at our organisation for Oracle 10g R2
Can you pls send me any docs u r having for configuration of Oracle in windows clusters .
And, can you pls elaborate on this point
e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2.
Pls send me the details at [email protected] or you can contact me at 08054641476.
Thanks in advance.
Similar Messages
-
Active-Passive Failover cluster in Windows Server 2008 R2
Hi,
As per the client requirements, I build an active-passive Oracle 11g R2 database cluster in Windows Server 2008 R2.
(Used Microsoft cluster as Client don't have Fail Safe licence)
As per the configuration, I follow the below mentioned steps:
a)OS vendor configured Active-Passive Windows Cluster
b)Installed Oracle 11g R2 on both the nodes with same ORACLE_HOME name
c)Create Listener and configured it with cluster IP in Node1
d)Create Database from Node1. Physical files location are all in Storage
e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2
f)Configure Listener with the same Oracle SID.
g)Test database failover from Node2 with Listener registration
h)Open the Windows Failover Manager to configure the Oracle Database and Listener Service in the Cluster Group
Now I am facing problem by moving Cluster Group movement. Whenever trying to moving the group, Listerner service is not getting up by Cluster Manager as quorum is not included in the group and that quorum disk is not moving in the failover node with the Oracle Cluster Group. As per my understanding Quorum having information of Cluster IP which has been configured with Listener.
But when I am shutdown one node, then in the other node all the resources successfully moving and cluster able to online all the resources. I guess at that time Quorum is also moving and thus cluster can able to make Listener online.
Please suggest how to resolve this issue. Means how can I make Listener up instead having any dependencies with Quorum in the fail over node?
Thanks a lot for your help.hello
I was going through your post and i am also doing the same thing here at our organisation for Oracle 10g R2
Can you pls send me any docs u r having for configuration of Oracle in windows clusters .
And, can you pls elaborate on this point
e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2.
Pls send me the details at [email protected] or you can contact me at 08054641476.
Thanks in advance. -
Installing Oracle 10g on Windows 2008 SP2 64bits
Hello,
I downloaded this version: 10204_vista_w2k8_x64_production_db. The setup starts fine, I set the location for the Oracle Home directory to (C: \oracle\product\10.2.0\db_1), click next, the setup continue and then stop with the following message: "the name Oracle home directory is invalid. Oracle home directory can not exceed 128 characters ....>> (translate from french)
Other info:
- I set the local administrator account on the machine
- I downloaded twice the archive (I thought it was corrupt)
- This install was within a VMWare VM, I tried on a physical W2K8 server and same message popup
- The latest Windows update are installed on the server
- I searched on Google but people who have encountered this problem had indeed spaces or invalid characters in the path.
I really don't what I did wrong.
Thank you for your help.
ChrisThe setup starts fine, I set the location for the Oracle Home directory to (C: \oracle\product\10.2.0\db_1), Create this directory manually, and try using the browse button on the installer in order to select this directly.
Try this and see -
Configuring Active-Passive cluster for Oracle Database on Red hat
Can I configure the red hat cluster suite to implement an Active-Passive Oracle Service without configuring GFS Volume manager?
In other words, I want to install Oracle Standard Edition for Red hat on 2 node separately. Subsequently I am creating an Oracle Instance on the firsth node whith Oracle datafile, redologfile, controlfile,initfile on a SAN Storage. Subsequently I want to configure red hat cluster suite to start the Oracle Instance on the second node when the the firsth node fail. Only one node at time have the Oracle Instance up. Does this configuration works correctly or I have to install and configure any software to manage shared storage file system(like GFS Volume Manager or OCFS, ASM ecc.)?
ThanksThis scenario is usually done through custom scripts.
To get an idea of what is required, I recommend you look through Oracle's DataGuard documentation, as Data Guard is a free utility included in the Enterprise Edition to do exactly what you want.
(Having spent a lot less money to buy the less expensive product, you now have the opportunity to spend more in programmer and maintenance costs to create your own solution.) -
Hi all,
I got myself a nice problem
I have two ESXi 5.5 host, each server runs a guest Sophos UTM9, these are used as gateway/firewall in active/passive mode. Each server has one physical NIC for this LAN traffic. Connected on a dvSwitch.
They active/passive is working fine, when one goes down the other takes over and vice versa. But, I noticed that one of my ESXi servers had some problems. It has DNS issues and couldn't ping the Gateway. I did check all settings and all turns out to be fine. Strange thing was that after a reboot I can ping the gateway for a minute or two and after these minutes the gateway becomes unavailable on one ESXi server. On the other ESXi server there are no problems and the gateway is responding. Checking for differences between the two ESXi server gave no result, checking the UTM gateway and again nothing to detect.
Then it struck me , after the reboot the second (passive) UTM Gateway comes online in 1 or 2 minutes and on that moment problems start. The problems are on the ESXi server with the passive UTM.
I suspect that the ESXi servers sees the (passive) UTM gateway on the servers internal network card and instead of sending the traffic over the switch to the ESXi server with the active UTM it keeps the traffic local resulting in PING and DNS failures.
It seems to me that this is a active/passive problem and I have to tell the ESXi host with the passive gateway to forward the traffic to the other server, for incoming and outgoing traffic. I been thinking of LACP configuration, getting the dvSwitch ports of the two physical server seen as one. But, untill now I'm not getting the desired result. Can anyone help me on getting this active/passive gateway cluster working?Hi,
You talk about windows cluster, is this the correct structure that you want.
If you are looking to a Oracle Database active - passive structure. Lets say Oracle Dataguard than the primary database is operational on server 1 and de standby is in recover mode (passive) on server 2. For more info on Dataguard "http://docs.oracle.com/cd/E11882_01/server.112/e25608/toc.htm"
Cheers,
Jos van den Oord
Blog : http://joordsblog.vandenoord.eu/
Company : http://www.transfer-solutions.com/
"Don't believe it, test it!" -
How to Configure Webutil in Oracle 10g Developer Suit
Dear All,
How to Configure Webutil in Oracle 10g Developer Suit.
Please give me the step by step solution.
Thanks and Regards,
FazilThis is a very frequently asked question. Searching the Forum or the Forms Help system would have given you your answer! Search Forms Help on "Configure WebUtil" and read the configuration guide and checklist articles.
Craig... -
How to Configure and Use Oracle's JMS Connector with Tibco EMS
Jeff,
I am getting the below exception while try to do the deployment of the sample provided on 'How to Configure and Use Oracle's JMS Connector with Tibco Enterprise for JMS'
While deployment not able to get the 'TibcoJMSReference',
As I understand in the 'orion-application.xml for the below, unable to get the instance. Could you adivce how I can enable the trace more?
<resource-provider class="com.evermind.server.deployment.ContextScanningResourceProvider" name="TibcoJMSReference">
could you help to resolve the issue?
Error
Operation failed with error: No resource named 'TibcoJMSReference/TibcoXACF'foundHi,
I'm also looking for the same 'Configure and Use Oracle's JMS Connector with Tibco JMS to consume message'. If you have already implemented and working fine, please let me know the steps and some documents. -
Oracle 11GR2 on windows 2008 Geo-Dispersed cluster
Hi all,
anyone can guide me about the installing oracle 11GR2 on windows 2008 Geo-dispersed cluster environment? Please guide and provide documentation if possible,
thanksBy "geo-dispersed", do you mean a cluster with servers is physically remote locations ? If so, the install process does not care about how far apart the servers are physically. Follow the standard install doc at http://download.oracle.com/docs/cd/E11882_01/install.112/e16773/toc.htm
Srini -
Oracle RAC Cluster Health Monitor on Windows 2008 R2 64Bit
Hello colleaques,
i run a 2-node RAC Cluster 11.2.0.2 64Bit on Windows 2008 R2 64bit. I did installl the Berkeley DB Version 4.6.21 succesfully.
After that i installed the crfpack.zip (CHM) as described in the README.txt.
F:\Software\ClusterHealthcheck\install>perl crfinst.pl -i eirac201,eirac202 -b F:\BerkeleyDB -m eirac201
Performing checks on nodes: "eirac201 eirac202" ...
Assigning eirac202 as replica
Installing on nodes "eirac202 eirac201" ...
Generating cluster wide configuration file for eirac202...
Generating cluster wide configuration file for eirac201...
Configuration complete on nodes "eirac202 eirac201" ...
Please run "perl C:\"program files"\oracrf\install\crfinst.pl -f, optionally specifying BDB location with -b <bdb location> as Admin
user on each node to complete the install process.
F:\Software\ClusterHealthcheck\install>c:
C:\Users\etmtst>cd \
C:\>cd "Program Files"
C:\Program Files>cd oracrf
C:\Program Files\oracrf>cd install (on both nodes as described in the README.txt)
C:\Program Files\oracrf\install>perl crfinst.pl -f -b F:\BerkeleyDB
01/30/12 16:42:21 OracleOsToolSysmService service installed
Installation completed successfully at C:\"program files"\oracrf...
C:\Program Files\oracrf\install>runcrf
01/30/12 16:44:03 StartService(OracleOsToolSysmService) failed:(1053) The service did not respond to the start or control request i
n a timely fashion.
01/30/12 16:44:03 OracleOsToolSysmService service started
It says here OracleOsToolSysmService was started, but it was not !!!
Manual starting gives the same error. !!!!
Please has anybody had the same problem ??
regards and greetings, AbrahamThere will be a new version of the Standalone CHM/OS for Windows that will work with 11.2.0.2 and earlier versions available on OTN in the near future. The older version that you are using has not been tested and due to the infrastructure changes in 11.2 it is not expected it will work. The integrated CHM/OS that is included as part of the 11.2.0.3 GI installation does work as does the new GUI (CHMOSG) now available for download.
-
How to configure IPS 4240 - K9 to send log file to syslog server
I am looking for the commands in how to configure IPS 4240-k9 to send log file to SYSLOG server. If anybody has or came across similer issue please advice.
Thanks in advanced.Ali -
I am sorry to tell you, but the Cisco IPS Sensors do not send Syslog messages. Your only options for sending signature event information are:
SDEE (an TLS Encrypted XML formatted message) the sensor is the SDEE Host and your event receiver (MARS, IME, Intelitactics, etc) is the client.
SNMP Traps - You need to set the "Action" on each signature you want the sensor to send a trap.
- Bob -
How to create listener in 11g RAC on windows 2008 server
Dear All,
i worked on win 2003 and linux 4, 5 too. i have installed oracle RAC on both windows and linux.
now i have installed oracle RAC11gR1 on windows 2008 server.than installed oracle software . now i want to create listener from db_home which i am facing problem.
i m starting netca from db_home. following the insturction when i finishing it , the proces get started but in the middle is showing the listener on node1 and node2 can't be created.
please guid me how i willl be able to creat it.
2nd poing how to create asm instance on RAC11gR1. is it need to install saparate home like 10g for that or i can create from 11g software home.
thanks,
sher khanthanks for the update ,
dear oracle 11g rac recomends to create ocr and voting disk on asm.
i followed the documents they are saying you have to install grid control infrastructure and than need to create asmcfs.(automatic storage management cluster file system.).
how to create asmcfs to avoid the gridcontrol, if its must is it need to install on one node or both nodes.
can you plz guide me how to do this .
thanks, -
Sql 2008 r2 cluster side by side with sql 2012 cluster on Windows 2008 R2
We have a SQL 2008R2 active/passive SQL cluster running on Windows 2008 R2 cluster.
I would like to add a SQL 2012 clustered instance to the same Winows 2008 R2 cluster.
Are there any issues involved having a SQL 2008 R2 clustered instance running side by side with a SQL 2012 instance in same Windows 2008 R2 cluster?
Are there any pitfalls/"gotchas" to watch for with SQL 2012 cluster install?
Thank you so much!Hello,
Two instances, one SQL Server 2008 and the other SQL Server 2012, side-by-side, is fully supported.
I would like to recommend you to assign a different port (not port 1433) to the non-default instance
to avoid an IP address conflict between both instances.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
I only have windows 8.1 kms host key but I can't add a client OS kms key to Windows 2008 R2 kms server. And I don't have Windows 2012 R2 license either. Is there any way I can activate Windows 8.1 using my existing kms server? Thanks.
I would like a yes no clarification answer. So does this mean that EVEN WITH THE PATCH. My Server 2012 Standard edition that currently hosts KMS VA for clients running Win7, Win 8, Office15, Server 2008, Server 2012. Will not be able to host windows 8.1?
I will have to install 8.1 and use as a host?
if you have a KMShost product key for WS2012R2, you can patch a down=level Server and be fine.
(the OP didn't renew SA or otherwise has no KMShost pkey for WS2012R2)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
I'm having similar issues and have a similar question that doesn't seem to be answered:
My KMS server is Windows 2008 R2 (Also is my domain controller). I want to activate Windows 2012 R2 and Windows 8.1 machines off this KMS server. I can install the 2012 R2 key just fine but receive error 0xC004F015 (The Software Licensing Service reported
that the license is not installed) when I try to install my 8.1 KMS key.
What I'm gathering from this thread is that I have to set up a Windows 8.1 host and set it up to be a KMS server exclusively for activating Windows 8.1. Is this correct? If so, Microsoft needs to fix that. I have a SERVER for activations for a reason: it
is a server, not a client. If I am mis-understanding, how do I get my Windows 2008 R2 server to accept the Windows 8.1 KMS key for activating 8.1 clients?
Thanks!
You don't need Windows 8.1 KMS key. Your 2012 R2 KMS key will be able to activate your Windows 8.1 machines. So your current set up is fine, no need to set up another Windows 8.1 KMS host.
My problem is I don't have 2012 R2 KMS key as I didn't buy any Windows 2012 R2 license. So I can't use 2012 R2 KMS key to activate my Windows 8.1.
Oh that's interesting. I guess I need to play around more because my 8.1 test machine isn't activating. I'll start a new thread for that if needed. Sorry for the confusion. -
Instances in one node runningi in Oracle Clustster on Windows 2008 r2 VM
Helo,
I have created a Oracle 11g (11.2.0.2)cluster in windows 2008 r2 Environment in Vm
I have created the dbs also and every thing was working fine.
But after restarting the nodes instences in 1 node is not starting. 1 node is up so i can connect to DB.
when i do srvctl:
instance testdb1 is running on node xd-oradbb1-vm
instance testdb2 is not running on node xd-oradbb1-vm
srvct node apps - No Errors
crsctl - Both are online No Errors
When I try to start Below is the erro I am getting
The resource action "ora.testdb.db start"
encountered the following error:
ORA-00119: invalid specification for system parameter REMOTE_LISTENER
ORA-00132:
syntax error or unresolved network name 'RIE-ORADB-SCAN:1521'
Host file entries are :
#PUBLIC
10.53.52.41 XX-ORADBN1-VM.arg.internal XX-ORADBN1-VM
10.53.52.42 XX-ORADBN2-VM.arg.internal XX-ORADBN2-VM
#PRIVATE
10.1.1.41 XX-ORADBN1-VM-PRIV.arg.internal XX-ORADBN1-VM-PRIV
10.1.1.42 XX-ORADBN2-VM-PRIV.arg.internal XX-ORADBN2-VM-PRIV
#VIRTUAL
10.53.52.43 XX-ORADBN1-VM-VIP.arg.internal XX-ORADBN1-VM-VIP
10.53.52.44 XX-ORADBN2-VM-VIP.arg.internal XX-ORADBN2-VM-VIP
#SCAN ID
10.53.52.45 XX-ORADB-SCAN.arg.internal XX-ORADB-SCAN
10.53.52.46 XX-ORADB-SCAN.arg.internal XX-ORADB-SCAN
10.53.52.47 XX-ORADB-SCAN.arg.internal XX-ORADB-SCAN
Listener entry
LISTENER_SCAN3=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN3)))) # line added by Agent
LISTENER_SCAN2=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN2)))) # line added by Agent
LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))) # line added by Agent
LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3=ON # line added by Agent
Kindly help, I have created Oracle RAC Environment by refering the documents and and I am a beginner.
Thanks,
RajeshNode1 (In this node it is up)
D:\app\11.2.0\grid\NETWORK\ADMIN
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
ADR_BASE = D:\app\oraadmin
D:\app\oraadmin\product\11.2.0\dbhome_1\NETWORK\ADMIN
SQLNET.AUTHENTICATION_SERVICES = (NTS)
remote_listener=RIE-ORADB-SCAN:1521
Node2 (not up)
D:\app\11.2.0\grid\NETWORK\ADMIN
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
ADR_BASE = D:\app\oraadmin
D:\app\oraadmin\product\11.2.0\dbhome_1\NETWORK\ADMIN
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES)
remote_listener=RIE-ORADB-SCAN:1521 -
Oracle 11 under Windows 2008 installation problems
I cannot make Oracle 11.2.0.1.0 work under Windows 2008. The server's host name is SARABI. Anything of the following takes place on SARABI, no remote access is involved.
The procedure has been as follows...
- Windows 2008 was installed
- Oracle 11.2.0.1.0 was installed
- listener.ora, sqlnet.ora, tnsnames.ora were modified
- no other Oracle configuration file was touched
At this point it worked. I could connect with SQL Plus and with SQL Developer.
Next the server was rebooted. Without having changed anything at all, connecting was impossible. The message is "12514, TNS, listener does not currently know of service requested in connect descriptor". The three configuration files are given below.
Currently, all services are running accoording to Windows Control Panel. There are no entries in the eventlog. Executing "TNSPING SARABI" works fine. Executing "LSNRCTL status" shows "The listener does not support any services" (translated from German "Der Listener unterstützt keine Services"), the full output is given below.
--- LISTENER.ORA ---
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
ADR_BASE_LISTENER = C:\Programme\Oracle\Admin
--- SQLNET.ORA ---
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
SQLNET.AUTHENTICATION_SERVICES= (NTS)
ADR_BASE = C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\log
--- TNSNAMES.ORA ---
SARABI =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
--- LSNRCTL status ---
C:\Users\admin>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 25-SEP-2010 11:49:24
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS des LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
Startdatum 25-SEP-2010 11:24:54
Uptime 0 Tage 0 Std. 24 Min. 32 Sek.
Trace-Ebene off
Sicherheit ON: Local OS Authentication
SNMP OFF
Parameterdatei des Listener C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\network\admin\listener.ora
Log-Datei des Listener c:\programme\oracle\admin\diag\tnslsnr\SARABI\listener\alert\log.xml
Zusammenfassung Listening-Endpunkte...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SARABI.lionsland.local.de)(PORT=1521)))
Der Listener unterstützt keine Services
Der Befehl wurde erfolgreich ausgeführt.
Michael G. SchneiderDeleting the three configuration files and recreating them with "Net Manager" gives...
--- LISTENER.ora ---
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
ADR_BASE_LISTENER = C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\log
--- SQLNET.ora ---
NAMES.DIRECTORY_PATH= (TNSNAMES)
ADR_BASE = C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\log
--- TNSNAMES.ora ---
SARABI =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
After rebooting the server, the same problems appear. Executing "sqlplus SYS/**** AS SYSDBA" gives "database not started". Then executing startup gives...
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_ORCL'
Michael G. Schneider
Maybe you are looking for
-
Videos no longer recognized by MacBook Pro
A novice here. I have home videos that used to work (.m4v and .mkv) but they no longer do. The size appears to be what they always were (4.12+ GB) but the icon is now solid white and is no longer recognized by anything (QuickTime, Preview, etc.).
-
I keep getting a 404 error when trying to access any search link using google, I can get to a website by directly using the URL. I have cleared history, empited the cache and reset safari. Any suggestions.
-
Kernal panics black and white text as well as regular KP screen
Bought a used Powerbook Alum 15" 1.5 mhz. Almost continually having kernal panics. Started out being just the regular ones, and could not trace it to anything special, so after DW said there were problems with the HD, installed a new one. Helped for
-
Hi , I am very new to ODI so might be the question would sound silly . Few Questions: 1. I want to know if there is any way of hardcoding SQL query in ODI for the source. 2. I have 4 total interfaces(LoadEmp,LoadCustomer,LoadProd,LoadFact) . I am bun
-
How to view Time Machine files on a Capsule
Hi guys, Info: OS X 10.10.3 Time Capsule version 7.7.3 iMac 21" Mid 2011 Issue: I use the time capsule as a backup specifically for my massive iTunes library. When I use a non-apple hard drive for Time Machine backups, I am able to browse the file sy