How to configure Alpha Numeric No range for the Material Type

Dear Expert,
i kindly request for expert help on alpha numeric no range for the Material Type.
business is looking for material no like 910442208571D. at present we have no range like 9000000000000 to 9999999999999
how i can configure in the system??
pl. help me on this
Thanks a lot
H shah

Hi,
System will not bring alphanumeric number of materials automatically during MM01.
Check use exit MGA00002 - Material Master (Industry): Number Assignment.
Also check 2 Function Modules:
EXIT_SAPLMG02_001 - Customer Exit: Internal Material Number Assignment
EXIT_SAPLMG02_002 - Customer Exit: External Material Number Assignment.
Regards,
Biju K

Similar Messages

Number range for the Material type

Hi,
When I am trying to create the number range for the Material Type, when I choose the groups the following error has occurred
No elements exist for the object/sub-object
What may be the problem
Thanks in advance

Hi Binu,
Had similar issue lately.
This is happening as the download of the category is not done properly.
So the solution which wrkd for me was to dwld the content again correctly, and if its done, there'll be no such error shootin up.
Suji

Alpha Numeric number Ranges for Sales order Acording to sales office wise.

Hi Experts,
         I have a Issue for genrating sales order numbers With Alpha Numeric Number Ranges for sales office wise Internaly . How can we get this is there any Userexits or badi for this . If Any one Come across this issue plz guide me.
   The Alpha characters should not change that will be sales office region code. only the Numeric numbers should change .
Ex;   Abc-123000 to Abc-200000
Regards,
Ravi.

This alpha-numeric format is not possible directly with SNRO settings.
You need to opt for external number range, and in the exit of your respective transaction you need to takecare of this number generation explicitly by programming.
http://www.sap-img.com/sap-sd/number-ranges-in-sales-order.htm
any more inputs from experts are welcome..
Hi,
1. goto include MV45AFZZ and to user exit Save_document This form is called before COMMITand double click on FORM USEREXIT_SAVE_DOCUMENT.
2.it will show the program MV45AF0B_BELEG_SICHERN from were this user exit is called, selcet the program and click on Display.
3. you can use the enhancement point enhancement-point beleg_sichern_01 spots es_sapmv45a. just below the PERFORM USEREXIT_SAVE_DOCUMENT to call the badi method on_costing_component.
regards.
santhosh reddy
Message was edited by:
        Santhosh Reddy
Message was edited by:
        Santhosh Reddy

Alpha numeric no. range for PERNR (Employee no.)

HI,
Any option for adding alpha numeric no. range for PERNR (Employee no.)
RX

Better you can use Numeric only....
see the sap help
External intervals can only contain either letters or numbers, as sorting can differ between platforms (Code page):
Allowed: 000001 to 999999
AAAAAA to ZZZZZZ
Not allowed: AAAAAA to 999999

How to configure multiple listeners to listen for the same instance.

Hello everyone,
I am running oracle database 11g and I want information regarding how to configure multiple listeners to listen for the same database instance. Actually I know how to configure more than one listener but the main thing that I am confused about is when we create listener.ora file, do we have to statically register the database instance with both the listeners or the instance will register itself with both the listeners.
According to my knowledge the instance will register with the listener specified by LOCAL_LISTENER parameter and we cannot have more than one value for this parameter.
Please only give detailed answers with example as I am tired of simple answers with details that I already know.

Hello,
Yes, it can make sense to have several listener for one Oracle instance. For instance you may have one listener for the applications another listener for DBA administration tasks as well as one listener dedicated to dataguard broker. It is not possible to have several listeners listening on the same IP and Port.
By default the database try to automatically register to a listener on port 1521. To instruct the instance to register to a specifc list of listeners you can add in the init.ora the local_listener parameter with an alias definition:
i.e
local_listener=MY_SET_OFF_LISTENERS
in your tnsname.ora add an entry called:
MY_SET_OFF_LISTENERS_LOCAL= (ADDRESS_LIST=
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1530))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1531))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1532))
In this sample your instance will register to three listeners listening on respectively port 1530, 1531 and 1532
If you want your clients can be balanced over the 3 listeners

How to get rid of error message for the material?

Hi everybody,there is a material which is showing an error message whenevr try to create a sales order, i've checked the material master...there is no check in X-plant Mtrl or X-dist chan or any flag for deletion...but still the red error message comes up while creating a sales order...how to get rid of this error?

this means material is blocked for procurment
three kinds of block can be there
01 Blocked for procment/whse
02 Blocked for task list/BOM
03 Blocked for Purchasing
GOTO MM42 give material n plant data
Select BESIC VIEW
there is a field called as material block remove the blocking reason
Hope this will help
Edited by: WISH on Mar 24, 2008 6:33 AM

Alpha numeric numer ranges for Shopping Cart based on year and month

Dear All,
My client requirement is that Shopping cart number should be generated based on year and month specific.
Though it is possible through smart numbering, it should generate automaticaly.
For eg:- Shopping cart generated for March 2011 should be 1103SC00001 to 1103SC99999
Shopping cart generated for June 2011 should be 1106SC00001 to 1106SC99999
Shopping cart generated for January 2012 should be 1201SC00001 to 1201SC99999
Is thera any badi available for this.
Regards,
Raju

why dont you add this to description field?

How to Configure CATS Profiles in order for the Hours to be posted to CO

Hi All,
I have quick question for you all, how do I configure the CATS Time Entry Profiles so as to enable me to post the Hours (Different Receiving Cost Centers & Receiving Internal Orders) to CO.
Currently I enter time using TCODE: CAT2 and a CATS Profile and Save the Timesheet.
Following which I Approve Times using CAT4.
Then when I try to transfer time to both HR and CO using TCODE: CATA time gets transferred to HR Time Management Infotypes but not to CO.
I tried a couple of other TCODES as well i.e: CAT7 & CAPS and tried posting to CO but I am getting a message saying that "NO DATA TO TRANSFER" despite there been ample data fit to be transferred to CO.
So, my question to you all is how do you handle this situation in your implementation/organization.
Looking forward to hear from you soon.
Regards,
Aslam

Hi Aslam,
Im not sure why this isnt working.
Try approving timesheets using CATS_APPR_LITE
And check whether the timesheets are approved.
Once that is done.
Run CAT7
This would post the data from CATS to controlling.
Regards,
Brinda

Seperate no range for same doc type in 2 co codes

Hi,
I have created two company codes 1000 & 2000.
Under 1000 I've EOU plant 1111 & under 2000 I've domestic plant 2222.
Now, I've created PO document types. I've assigned no range to them.
But I want to use the same document type for both the plants but with different range(say 1100..00 for plant 1111 & 220000..00).
Is it possible?
Last option is to create seperate doc type for each plant, but I don't want to do that.
Guide me on this.
Thanks & Regards,
Piyush

For the same document type for two different company code you can create two different number range.
IN Spro-mm-Purchasing Purchase order document type -- enter the number range for the document type
Eg
Company code   Doctype    number range
     AAA                 NB                 1000-1010
     BBB                 NB                 2000-2010
G.Ganesh Kumar

PR for the material which is out of stock

Hi All,
can anybody tell me how e can create a PURCHASE REQUISITION for the material which is out of stock?

Hi,
Use ME51N to create purchase requistions. Also please read the SAP help documnetation before posting basing questions.
Regards
Sreekanth

A/C assignment category mandatory for the material

Hi Gurus,
I am facing the error message"A/c assignment category mandatory for the material" while creating a PO. How to fix this?
Thanks,
Kumar

hi,
For PO you can make the account assignment optional from:
SPRO --> MM -> Purchasing --> PO --> Define screen layout --> Here choose me21 --> see the details....check in the basic data, item details....
For the material type of the material , the qty n value update setting is:
SPRO--> Logistics general --> MM -> Material type -->Define attributes of material type --> in it see for individual material type...
Hope it helps.
Regards
Priyanka.P

Allow mov type 261 and 262 for a material type only

Requirement is to allow movt type 261 and 262 for a particular material type.( Assume Only 261 - 262 issue transactions happen against that material type.)
User to be restricted, while material issue (migo), for the material type XXXX to 261 - 262 movt type only.
No any other movt type allowed for this material type while issuing material.
All suggestions welcomed.
Regards,
Rakesh

Thanx amit.
But same user uses all other movt types for other material type also.

Material Master views for every material type

HI Expertis,
I am facing to the big problem. My requirement is to identify the Material Master Views relevent to the each and every Material Type.
As an example, for the material type "FGTR" what should be the required views to create material master?
From the MM01 Txn i found 36 Material types. Also found the standard views in "OMS2" Txn. But in OMS2 txn it gives me almost all the views in material master.
Atlease i hope to categorize the material types which are going to use same material views. So i can ask abaper to develop it.
these are the required Material types : MODE, FGTR, WETT, KMAT, LEER, LGUT, FERT, FOOD, INTR, CONT, IBAU, HERS, NLAG, NOF1, UNBW, HIBE, VERP, FRIP, PIPE, FHMI, ROH, LEIH, HALB, DIEN, ERSA, HAWA
I would be gratefully thank u, if u can guided me on this matter.
Thanx & Regards,
Rashika.

Hi,
You can ask your abaper to write a small program by using table t134(T134-PSTAT) and T132T .From this tables ,for each material type, you get all views.
User department Maintenance status
Work scheduling A
Accounting B
Classification C
MRP D
Purchasing E
Production resources/tools F
Costing G
Basic data K
Storage L
Forecasting P
Quality management Q
Warehouse management S
Sales V
Plant stocks X
Storage location stocks Z
hopw this will help you.
With Regards,
Jaheer

How to configure proxy services in OSB for Rest based services?

how to configure proxy services in OSB for Rest based services implemented using Jersey (Rest).
The Client need to contact OSB proxy servies by posting application/xml using jersey client and OSB proxy service will call the OSB business service.
i would like to know how to get this request in OSB proxy service and send it to the business service and get the response back.

I would suggest you refer to the below links:
https://blogs.oracle.com/jeffdavies/entry/restful_services_with_oracle_s_1
https://blogs.oracle.com/jamesbayer/entry/using_rest_with_oracle_service
Hope this helps.
Thanks,
Patrick

How to configure an automatic vendor assignment for a purchase requisition

hi guys,
how to configure an automatic vendor assignment for a purchase requisition in sap
Thanks in advance

hi Swathi,
Check these Links out
http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee11e655c811d189900000e8322d00/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5e/372e3b7532394ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/4d/2b912a43ad11d189410000e829fbbd/frameset.htm
Regards,
Santosh

How to configure Alpha Numeric No range for the Material Type

Similar Messages

Maybe you are looking for