How to configure an Alert message if communicationChannel(JMS) stops

All,
Is there a way how to configure an alert when the communication channel stops.
<b>Scenario:</b>
In the path Runtime workbench->Component Monitoring->Adapter Engine->Communication Channel monitoring, if we see that a communication channel has stopped(RED traffic light as Status), then can we trigger an alert notification for same.
Currently we have alrerts configured for any message/s failure in the JMS Adapter Framework. So can we trigger simmilar alerts when a comm channel stops(for whatever reason).
Thanks in advance
RK

Hi Sreeram,
Thanks for the quick reply.
We have a scenario where we activate individual channels at a given time. So in this case, Adapter will always be in RED as all queues are never running in our scenario.
So we need an ALERT to be triggered for individual comm channels. Is theer any way that you can think of ?
Thanks and regards
RK

Similar Messages

How to configure email Alerts in OEM Cloud 12c for Database Servers up/down

Hi everybody,
How to configure email Alerts in OEM Cloud 12c for Database Servers up/down status?
Regards,
Miguel Vega

Hi Miguel Vega,
Information regarding the notifications:
==============================
Configuring notification rules in 12c is different from earlier releases.
The concept and function of notification rules has been replaced with a two-tier system consisting of Incident Rules and Incident Rule Sets :
1. Incident Rules: Operate at the lowest level granularity (on discrete events) and performs the same role as notification rules from earlier releases.
By using incident rules, you can automate the response to incoming incidents and their updates.
A rule contains a set of automated actions to be taken on specific events, incidents or problems.
The actions taken are for example : sending e-mails, creating incidents, updating incidents, and creating tickets.
2. Incident Rule Set: A rule set is a collection of rules that applies to a common set of objects, for example, targets, jobs, and templates.
To help you to achieve the Notification Rules configuration, refer those notes :
How To Configure Notification Rules in 12C Enterprise Manager Cloud Control ? Doc ID 1368036.1
EM12c How to Add and Configure Email Addresses to EM Administrators and Update the Notification Schedule ?Doc ID 1368262.1
EM12c How to Subscribe or Unsubscribe for Email Notification for an Incident Rule Set ?Doc ID 1389460.1
EM 12c How to Configure Notifications for Job Executions ? Doc ID 1386816.1
Best Regards,
Venkat

How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?

Hi,
I am new in Oracle Enterprise Manager so please tell me How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?
Thanks,
Sagar Pawar.

Hi Sagar Pawar ,
First you need to set the email notification :
Kindly review :
12c Cloud Control: Steps to Configure Incident Rules to Send Notifications or
Manage Events / Incidents / Problems (Doc ID 1368036.1)
12c Cloud Control: Steps to Configure Email Notification Method (Doc ID 1368262.1)
Regards
Ansari

How to configure CCMS alert to monitor Authorization failures?

Dear All,
How to configure CCMS alert to monitor Authorization failures?
Thanks
Ashok

Hello,
in case you have not yet set up your monitoring infrastructure, the following link will provide you with the information needed:
http://service.sap.com/monitoring
If everything is set up (Agents are installed and connected to your central monitoring system, ...) you can go to transaction RZ21, select Technical Infrastructure - Configure Central System - Assign Central Autoreactions to set up your alerts.
For the Update errors use the MTE CLass AbapErrorInUpdate. For the Lock please use the search Option.
Regards
Christian
Edited by: Christian Rose on Apr 25, 2011 7:59 PM

How do I delete email messages so that they stop "bouncing" back and forth between my devices?

How do I delete email messages so that they stop "bouncing" back and forth between my Macbook, ipad, and iphone?

Hi ST,
The first screen shot is the left (main) screen after I moved CS6 to the right screen (second screen shot). As you can see the CS6 panels are in front of MS Word. If I click in the Word document they go behind Word. If I switch over to on the right screen the panels reappear but in front of Word again. So I either have to switch back and forth between the two screens if I want to work in CS6 or manually movee the panels over to the Right Screen. It is rather awkward to have to do that. Make sense?
Left (Main Screen)
Right Screen

How to display an alert message on click of link in tableview

Hi,
Following is the code for a tableview in layout section of a BSP( i have specified only one tableview column here). The requirement is to display an alert message on click of link in the first column that is "evbeg". Can anyone please help me how to achieve this? Appreciate quick response on this.
CREATE OBJECT lr_dateiterator TYPE cl_lso_bsp_it_trdates
            EXPORTING im_application = application
            im_tform = trainingform.
        <htmlb:tableView id            = "dates"
                             table         = "<%= dates %>"
                             iterator      = "<%= lr_dateiterator %>"
                             width         = "100%"
                             rowCount      = "<%= lp_len %>"
                             footerVisible = "FALSE"
                             sort          = "SERVER" >
              <htmlb:tableViewColumn columnName    = "evbeg"
                                     type          = "user"
                                     title         = "<%= otr(LSO_FRONTEND/schedule) %>"
                                     tooltipHeader = "<%= otr(LSO_FRONTEND/schedule) %>"
                                     sort          = "TRUE" >
              </htmlb:tableViewColum>
Thanks and Regards,
Archana.

you have to code in the iterator for this.
in the render_cellstart method of the iterator you need to code.
this is for a column.
when 'MATNR'.
data: text type string.
text = 'disp_alert()'.   "this java script i placed in the page
data: lo_link type ref to cl_htmlb_link.
create object lo_link.
     lo_link->id = p_cell_id.
     lo_link->onclientclick = text.
     lo_link->text = <fs>-matnr.
     p_replacement_bee = lo_link.
below is the java script i added in my page..
< sc ri   pt type="text/javasc ript"   >
f u n ction disp_alert()
a l e rt("helloworld");
< /s c ript >

How to configure Oracle Alerts For Sending EMail?

Hi All,
I am using Oracle Apps 12.1.1.
I am configuring Oracle Alerts to sent a email.
for that i have set
Unix send mail :/usr/lib/sendmail
Mail Database/Server Name:172.16.0.6
Mail Priority:Normal
In Accounts:
User Name:My User Name
Password:******
Anything need to configure because after submitting a request It is showing that request is successfully completed but not receiving mail.
Please Help.
Thank In Advance.
Regards,
SHD

Hi;
please check below links:
Alert-EBS
General EBS Discussion
Oracle Periodic Alert..
Oracle Periodic Alert..
Also see:
Oracle Alert Documentation Resources, Release 12 [ID 396315.1]
How to determine what email system is being utilized for Oracle Alert processing [ID 428193.1]
Configuring the Oracle Workflow 2.6 Java-based Notification Mailer with Oracle Applications 11i [ID 231286.1]
How to setup Email Notification from Microsoft Exchange with Oracle Alerts [ID 163249.1]
Regard
Helios

How to configure Mail Alerts in SAP R/3 System.

Hi,
I want to send mails to the users when alert occurs.How to configure that mail alers in R/3 system.pls send me the related information and links.
Regards,
Kiran.

HI
I think there is no standard functionality in sap u need to develop with abaper help with proper logic
if it is for venijula s_alr_87009936 try this t.code
Thanks & Regards
Phaneendra
Edited by: phaneendra Reddy on Jun 12, 2009 9:24 AM

How to convert javascript alert message into an Inline message in Apex Page

Hi All. Im new to Apex.
Present Approach -
I have a dynamic report region developed using API's like APEX_ITEM etc. I am using java scripts to validate these dynamic items and popup alert messages as shown below -
function ValidateNotObservedCB(p_row_num)
var v_row_num = p_row_num;
var v_not_observed_cb_status = document.getElementById('f_notobserved_'+v_row_num).checked;
var v_not_in_district_cb_status = document.getElementById('f_notindistrict_'+v_row_num).checked;
var v_program_code = document.getElementById("f_program_code_"+v_row_num).value;
if ( (v_program_code.length>0)&& ( document.getElementById('f_notobserved_'+v_row_num).checked==true ))
     bold alert("You have already entered a program code.") bold
     document.getElementById('f_notobserved_'+v_row_num).checked=false ;
     document.getElementById('f_notobserved_'+v_row_num).value='N';
} else if ( (v_program_code.length==0)&& ( document.getElementById('f_notobserved_'+v_row_num).checked==true )) {
     document.getElementById('f_notobserved_'+v_row_num).value='Y';
     document.getElementById('f_notobserved_'+v_row_num).checked=true ;
} else
     document.getElementById('f_notobserved_'+v_row_num).checked=false ;
     document.getElementById('f_notindistrict_'+v_row_num).checked=false;
     document.getElementById('f_notindistrict_'+v_row_num).value='N';
     document.getElementById('f_notobserved_'+v_row_num).value='N';
Question/Issue - How can I convert these alert messages into Inline messages to show on the page, similar to what appears when we do Item Validations in APEX.
Waiting for responses as this is an urgent requirement.
Thanks in Advance,
Madhu

Hi,
I did with jQuery small sample
http://apex.oracle.com/pls/otn/f?p=40323:36
Page HTML header is
<script type="text/javascript">
$(function(){
var lImg = $('<img alt="" class="pb" style="float: right;" src="/i/delete.gif"/>');
var lMesg = $('<div id="MESSAGE" style="border-top: 1px solid rgb(142, 170, 142); border-bottom: 1px solid rgb(142, 170, 142); padding: 5px; background: rgb(235, 241, 235) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous; width: 450px;" class="t14notification"></div>');
$('.pb').live('click',function(){
    $x_Remove("MESSAGE");
$('#SUBMIT').click(function(){
    if($('#MESSAGE').length == 0){
      $('#t14Messages').children().append($(lMesg));
       $(lMesg).append($(lImg));
       $(lImg).after($('#P36_NOTIFICATION').val());
    }else{
       $('#MESSAGE').text('');
       $('#MESSAGE').append($(lImg));
       $(lImg).after($('#P36_NOTIFICATION').val());
</script>I do not know does it help. Using this depend much on theme, defined class and IDs.
Br, Jari

How to verify JavaScript alert message display on page with C#?

Hi All,
I have a question about verify the JavaScript alert message on page. For example, I input the script in browser address like: "javascript:onmouseover=alert('popup windows')" . How to verify there's a alert message displayed on page with C#?
Thanks

Are you trying to use some automation or ? What the previous solution is they have put the text in the dom for you to pull out with C# or other languages.
if you are trying to automate this through a browser maybe look into WebDriver
WebDriverWait wait = new WebDriverWait(driver, 2);
wait.until(ExpectedConditions.alertIsPresent());
Alert alert = driver.switchTo().alert(); var alertText = alert.Text;
alert.accept();

How to disable Security Alerts message in IE10 via GPO

I'm trying to disable annoying Security Alert message "You are about to view pages over a secure connection" in IE10 via GPO.
I tried different GPO settings but neither of them did the trick.
Any advice\suggestion would be appreciated.
Thx. Boris

Hi,
You can try going to Tools > Internet Options > Advanced and uncheck the box next to "Warn if changing between secure and not secure mode".
And via the GP setting:
Computer Configuration\Administrative Templates\Windows Components\Internet Explorer\ Turn off the Security Settings Check feature.
Regards,
Ada Liu
TechNet Community Support

How to add an Alert Message

Hi, what steps must I take to add an alert message that reminds the Adobe Reader end user to Print their form if they wish to keep a record of their form data.
Also, where should such an alert appear, when and upon which event type?
Harry

Thanks Jimmy, unfortunately it doesn't work on my Submit button (which is where I do want it).. Here's what I have on the standard Submit button.
----- form1.SF_P8.SF_print-submit.EmailSubmitButton::click - (JavaScript, client) ------------------
xfa.messageBox("Please ensure you also print a copy for your records", Warning, 1, 1);
this makes my button do nothing at all, not even submit. I think it's because there are 2 events associated with it, the invisible "submit" and the new warning. Any suggestions?
Harry

How to fire a Alert Message in a table format

Hi friends,
Currently im performing an Alert. My requirement is i need to display the alert message to the user in the mail in a table format.
But i couldnt perform that, as the alert is not displaying in a properly aligned table format.
Can you friends propose me a right way to bring the alert in a table format with two columns.
Thanks in Advance..
Regards,
Saro

I agree w 936671, do this in PL/SQL. Much, much easier.
However, I will recommend a different approach using PL/SQL.
1) Create a package to send the emails. Sample code:
create or replace package cust_fnd_utilities as
procedure send_email(     p_sender     in     varchar2,
               p_recipient      in      varchar2,
               p_subject     in     varchar2,
               p_message     in     varchar2);
end cust_fnd_utilities;
create or replace package body cust_fnd_utilities as
procedure send_email(     p_sender     in     varchar2,
               p_recipient      in      varchar2,
               p_subject     in     varchar2,
               p_message     in     varchar2)
is
v_mail_host     varchar2(30);
v_crlf      constant varchar2(2):= chr(13)||chr(10);
v_message     varchar2(10000);
v_mail_conn     utl_smtp.connection;
begin
v_mail_host := 'localhost';
v_mail_conn := utl_smtp.open_connection(v_mail_host, 25);
v_message :=      'Date: ' ||
     to_char(sysdate, 'dd Mon yy hh24:mi:ss') || v_crlf ||
     'From: <'|| p_sender ||'>' || v_crlf ||
     'Subject: '|| p_subject || v_crlf ||
     'To: '||p_recipient || v_crlf || '' || v_crlf || p_message;
utl_smtp.ehlo(v_mail_conn, v_mail_host);
utl_smtp.mail(v_mail_conn, p_sender);
utl_smtp.rcpt(v_mail_conn, p_recipient);
utl_smtp.data(v_mail_conn, v_message);
utl_smtp.quit(v_mail_conn);
exception
when others then
     utl_smtp.close_connection(v_mail_conn);
end send_email;
end cust_fnd_utilities;
2) Build the email, then call the package from step #1. Sample code:
create or replace package cust_fnd_monitoring as
procedure profile_options_build_email (     p_errbuf     out     varchar2,
                         p_retcode     out     varchar2,
                         p_sender     in     varchar2,
                         p_recipient     in     varchar2);
end cust_fnd_monitoring;
create or replace package body cust_fnd_monitoring as
procedure profile_options_build_email (     p_errbuf     out     varchar2,
                         p_retcode     out     varchar2,
                         p_sender     in     varchar2,
                         p_recipient     in     varchar2)
is
v_subject          varchar2(100) := 'erpgamd1 - Recent Profile Option Changes';
v_mime_type          varchar2(100) := 'Content-Type: text/html';
v_body               varchar2(10000);
v_line_feed          varchar2(1):=chr(10);
cursor profile_cur is
select     p.user_profile_option_name,
     u.user_name,
     u.description,
     r.responsibility_name,
     v.last_update_date
from     fnd_profile_option_values v,
     fnd_profile_options_vl p,
     fnd_user u,
     fnd_responsibility_vl r
where     p.application_id = v.application_id
and     p.profile_option_id = v.profile_option_id
and     v.last_updated_by = u.user_id
and     v.level_id = 10003
and     v.level_value = r.responsibility_id
and      v.level_value_application_id = r.application_id
and     r.creation_date <= '01-NOV-2010'
and     v.last_update_date >= sysdate-7
and     u.user_name != '204020779'
union all
select     p.user_profile_option_name,
     u.user_name,
     u.description,
     'Site' responsibility_name,
     v.last_update_date
from     fnd_profile_option_values v,
     fnd_profile_options_vl p,
     fnd_user u
where     p.application_id = v.application_id
and     p.profile_option_id = v.profile_option_id
and     v.last_updated_by = u.user_id
and     v.level_id = 10001
and     v.last_update_date >= sysdate-7
and     u.user_name != '204020779'
order by 5 desc,4;
profile_rec     profile_cur%rowtype;
begin
open profile_cur;
<<profile_loop>>
loop
     fetch profile_cur into profile_rec;
     exit when profile_cur%notfound;
     if profile_cur%rowcount = 1 then
     -- We need to confirm that we fetch at least one row. Once we have confirmed, we want to generate
     -- the email body heading only during the first pass through the loop.
          v_body := '<html>' || v_line_feed;
          v_body := v_body || '<body style="font-family:arial;font-size:10pt">' || v_line_feed || v_line_feed;
          v_body := v_body || '<table cellspacing="5">' || v_line_feed;
          -- table heading
          v_body := v_body || '<tr>' || v_line_feed;
          v_body := v_body || '<td align="left"><u>profile option name</u></td>' || v_line_feed;
          v_body := v_body || '<td align="left"><u>responsibility name</u></td>' || v_line_feed;
          v_body := v_body || '<td align="left"><u>last update date</u></td>' || v_line_feed;
          v_body := v_body || '<td align="left"><u>SSO #</u></td>' || v_line_feed;
          v_body := v_body || '<td align="left"><u>user name</u></td>' || v_line_feed;
          v_body := v_body || '</tr>' || v_line_feed;
     end if;
     -- table detail
     v_body := v_body || '<tr>' || v_line_feed;
     v_body := v_body || '<td>' || profile_rec.user_profile_option_name      || '</td>' || v_line_feed;
     v_body := v_body || '<td>' || profile_rec.responsibility_name          || '</td>' || v_line_feed;
     v_body := v_body || '<td>' || profile_rec.last_update_date          || '</td>' || v_line_feed;
     v_body := v_body || '<td>' || profile_rec.user_name                || '</td>' || v_line_feed;
     v_body := v_body || '<td>' || profile_rec.description               || '</td>' || v_line_feed;
     v_body := v_body || '</tr>'|| v_line_feed;
end loop profile_loop;
if profile_cur%rowcount =0 then
     -- The cursor fetched no rows.
     -- send email using utl_smtp
     cust_fnd_utilities.send_email(p_sender,p_recipient,v_subject || '. No exceptions found.','No exceptions found.');
else
     -- Generate the end of the email body if we fetched at least one row.
     v_body := v_body || '<table>' || v_line_feed || v_line_feed;
     v_body := v_body || v_line_feed || '</body>' || v_line_feed;
     v_body := v_body || '</html>' || v_line_feed;
     -- send email using utl_smtp
     cust_fnd_utilities.send_email(p_sender,p_recipient,v_subject || v_line_feed || v_mime_type,v_body);
end if;
close profile_cur;
end profile_options_build_email;
end cust_fnd_monitoring;
3) In your alert, do not use an email action. Rather, your action should be a SQL*Plus script that calls the package from step #2.

How to configure a error message

Hello,
I have a User bean that hold informations about a user login ( login and password ). I write a method protected String logon() that search if the login and the password entered by the user match with those stored in a database. If not, i would like to add an error message to the FacesContext and so return null value.
My question is : how to add an error message to the FacesContext and so to get it in the current page.
Thanks

Hi flam70,
well, in my opinion you should do any access to your business logic in an action class and in the invoke application phase and not in the validation phase.
Your Action class returns e.g. "success" if the user passed the authentication and "null" if not (if jsf gets null value it returns on the same page back)
To put the error message into context you may do following:
In the invoke() Method of your Action class do authentication against your database.
If it fails, use the component(s) that were wrong for the error message(ids e.g. "username" and "password").
Add the message into context:
context.addMessage(nameComponent, new MessageImpl(Message.SEVERITY_INFO, "Username not found !", "LoginError"));
context.addMessage(passwordComponent, new MessageImpl(Message.SEVERITY_INFO, "Password wrong !", "LoginError"));
On your jsp page you use the error tag:
<h:output_errors for="username" />
<h:output_errors for="password" />
Greetings,
Rene

How to position all alert messages in a particular position?

Hi All,
I have developed a Application where it contains so many Alert Messages and i want display All Alert messages in a particular position of respected screen. I have tried the following code but it works for individual alert messages. I don't want to set x and y properties individually, i want set x and y properties globally. Is there any way that i can apply for all the alert messages in my application.
myAlert = Alert.show('Hello World');
PopUpManager.centerPopUp(myAlert);
myAlert.x = 0;
myAlert.y = 0;
Thanks in Advance

You could override the Alert class. This would like something like:
public class MyAlert extends Alert {
public get x():void {
return 0;
public get y():void {
return 0;

How to configure an Alert message if communicationChannel(JMS) stops

Similar Messages

Maybe you are looking for