How to configure an image to specific parameters. Needed: no more than 1200 pixels on long side jpeg format no less than 5 mb. Image will be viewed on large standup screen.(original image is 22 mb)
I often have requests for images to be sent within certain parameters: such as "no longer than 1200 pixels on longest side + jpeg format + file size no less than 5 mb." Images will be viewed on a large stand up screen. My original image sizes are usually around 22 mb. When I use Export and specify 1200 pixels (quality setting is all the way over to 12), Save the file to a folder on the desktop, and then open the image in Preview, Inspector shows that the file size is now 233 KB. How do I meet all specifications without reducing the image size so drastically?
Thank you.
. Pardon, it reduced it down to 833 KB, not 233 (I mixed it up with another image) from the Original image of 22 MB, RAW. Should it reduce it down that much??
That will depend on the amount of of detail in your jpeg. Given a certain pixels size and level of quality, a jpeg with many details will require a larger filesize than a jpeg with large plain regions of constant color.
Is 833 KB a big enough file size to view on a big screen?
The file size is really unimportant for the quality. What will count is the pixel size and jpeg quality you set. What is the pixel size of the large screen? That should match the pixel size you are using in your export preset. 1200 longest dimension is extremely unlikely for a large screen. Even the 17" display of my MacBook Pro has a larger pixelsize of 1920x1200.
I am sharing William Lloyd's doubts, that the specifications you were given are correct. I'd try to export with a larger pixelsize and a high jpeg quality - perhaps 10.
If you export with 10 Megapixel and a good jpeg quality, you will probably get a 5MB file, not that the size should matter.
Similar Messages
-
How to configure the Integration Builder connection Parameters
Hi,
If I leave the integration builder for a while, then I explore objects, the pop up message is:
"Connection to server lost You can log on again once the server is available again Do you want to log on again?"
I input password, some times regain the connection, most time not, then if not, I have to restart integration builder. I would like to know where I can adjust parameters to allow connection kept longer.
Thanks
LiangHi, Swarup:
Thanks for your reply.
The reality here is that we could not get solid support from BSAIS team, we came to many situations that we have to search around and tell them how to do the job like this (They are all afraid of Java Stack
I will keep search, if you have detailed information how to and where to configure those parameters, please let me know.
Regards!
Liang -
How to Configure Email for a Specific job when its Fails
Hi
We have So many jobs running in our HR system and BW systems but with no proper Monitoring Configuration. We have Solution manager 7.0 with EHP latest version with CCMS configured. How to setup the email in Solution Manager using CCMS when Job failed?
Is there any standard way of doing it from HR system and BW system other than using solution manager? so that we can use it for Temporary solution.
Thank you for you support
Regards
BhaskarHello Bhaskar,
I recommend to use SAP CPS by Redwood to schedule you BW and of course also your HR jobs.
Please check out the following document:
SAP CPS by Redwood - Increasing the Value of SAP NetWeaver Business Intelligence
Scheduling
The monitoring capabilities fo SAP CPS are described in the documentation:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/0a/1a5678b72c418d96242330b96473c6/frameset.htm
You can use SAP CPS together with SAP Solution Manager free of charge (and even the OEM license for SAP CPS is free of charge). This way you can also combine SAP CPS and Business Process Monitoring in SAP Solution Manager.
/people/martin.lauer/blog/2009/05/11/process-scheduling-adapter-for-sap-solution-manager-for-everybody
Kind regards,
Martin
Job Scheduling Managment - http://service.sap.com/jsm
SAP CPS - Scheduling -
How to configure the client tnsnames.ora parameters with a MTS Server
i have modified init.ora and start my oracle
as a MTS instance.
my client tnsnames.ora is the dedicate server
model.
how can i modify it and my clent can use
MTS server.
nullHi,
I dont think u will have to configure anything seperatley on the tnsnames.ora file to connect to a MTS Database.
I Hope i am right.
Regards,
Ganesh R -
How to configure Email output in SD
Dear friends Pls sent me details of how to configure email output in SD module.
<REMOVED>
Thanks & Regards,
<REMOVED>Hi
Idoc Def :Standard SAP format for electronic data interchange between systems (Intermediate Document). Different message types (such as delivery confirmations or purchase orders) normally represent different specific formats, the IDoc types. However, multiple message types with related content can be assigned to one IDoc type: For example, the IDoc type ORDERS01 transfers the "logical" message types ORDERS (purchase order) and ORDRSP (order confirmation).
Idocs are of two types basic type and the extension type .we need to configure the system settings for this process .
IDOC (Intermediate Document) - A data holder.
IDOC is divided in to three parts.
Control Record
Data Record
Status Record
Control record (Table: EDIDC):
- Every IDOC has only one Control Record
- Each Control Record contains header information like:
o IDOC Number
o Direction of IDOC: Inbound or Outbound
o Date and Time of creation of IDOC
o Date and time when the IDOC was last modified.
o Message Type of IDOC
o IDOC type and extension of IDOC
o Sender and Receiver Partner
Data record (Table: EDID4):
- Data Record contains Data to be processed.
- Every IDOC has one data record with multiple segments in hierarchy.
- Segments and Hierarchy of Segments are defined by IDOC Type and Extension.
- IDOC created has to strictly follow the hierarchy; else IDOC fails with Syntax error.
- Segments which are repetitive have qualifiers attached to it
Status record (Table: EDIDS):
- Status Record describes the status of IDOC.
- Each IDOC contains one status Record with multiple status information.
- Status at each level is appended to IDOC. E.g. When IDOC is created in SAP, Status is This IDoc has been generated through a test transaction, When the IDOC is added to system it is IDOC added, IDOC ready to be transferred to Application
- Status should always be read bottom-up. Status at the top is the latest status.
- Some Example of Status Records:
o Inbound:
§ 53 - IDOC successfully posted
§ 51 IDOC Failed
§ 64 - IDOC ready to be transferred to Application
o
Outbound:
§ 30 IDOC ready for Dispatch
§ 03 IDOC passed to port OK
§ 12 IDOC Dispatched
§ 16 Functional Acknowledgement Positive
§ 17 functional Acknowledgement Negative
IDoc Type: Defines the segments and hierarchy of segments
o Transaction Code:
§ WE30 To create, change or display the IDOC type and the extension.
§ WE31 To create the Segment
- IDOC type defines the segments to be used in the IDOC.
- It also defines the hierarchy and syntax of the segments.
- IDOC extension is nothing but to add segments to standard IDOC types.
- Transaction WE31 allows you to create segments.
- Program RSEIDOC3 documents the use of each IDOC type.
Segments:
Attributes of a Segment:
- Mandatory Segment: If checked, this segment should always exist in the IDOC.
- Minimum Number:
- Maximum Number: Maximum number of times this segment can be repeated in IDOC. -
Parent Segment: Parent of this segment
- Hierarchy level: Level of hierarchy.
Segment Definition (WE31):
Messsage Type: Defines the type of data in the IDOC
o Transaction Code:
§ WE81 To create, change or display the Message type and the extension.
§ WE82 Using this transaction you can link Message Type, IDOC Type, IDOC Extension and version.
- Message type identifies the type of data IDOC holds. E.g. Orders (ORDERS), Delivery (DESADV), Invoice (INVOICE). It also defines what needs to be done with the data in the IDOC, in case of Inbound IDOC, and which data to be extracted in case of Outbound IDOC.
- Message Type is linked to a process code, which in turn is linked to a Function Module. This function module extracts from or posts data to SAP depending on direction of IDOC.
- Relation between Message Type, IDOC type and IDOC extension needs to define. Without this relation Message type or IDOC type cannot be used.
Message Type Create, Change or Display (WE81):
Setup link between Message Type, IDOC Type, IDOC Extension and Version (WE82)
Process Code: Function Module is linked to a process code. This function module in executed for inbound or outbound IDOC.
o Transaction Codes:
§ WE41 Outbound Process Code
§ WE42 Inbound Process Code
- Process codes are linked to a Function Module.
- Relationship is Message Type is linked to a Process Code which is linked to a Function Module.
- In case if you are using a stand alone code to trigger an IDOC, you need not define a process code.
RFC Destination: System definition of destination.
o Transaction Code: SM59
- RFC destination identifies the destination of IDOC.
- In case of ALE:
o In ALE the communication mode is IDOC to IDOC, hence the type used is R/3 Connections.
o It is the destination SAP system which will receive the IDOC.
o In RFC destination you define the destination SAP system details like System, Login and Password.
Go thr below links:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
Sail -
Reducing the Resolution of a Referenced Original Image
I made the mistake of taking photos in very high resolution, and then importing the originals into my Aperture Library as referenced images. Now my hard drive is completely full (and I've already disabled and deleted Previews), so I'm trying to reduce the resolution of the original images using Aperture. After much reading, it seems that I'll need to Export Versions at a reduced size, Import the new versions into Aperture, and Delete the old originals. Seriously?!? Before I venture down this horrific path, please let me know if there is an easier solution. Thanks!
As Terence said -- the easy thing is built-in and recommended: select the Images whose Originals you want to relocate, and relocate them to external drives. External drives are _bargains_ right now. I recommend -- seriously -- buying them in triplicate: one as your "working data" store, and two to use as back-ups (never have all three in the same physical location).
Storage is so cheap, on fact, that even though for this one set of pictures you recorded a higher resolution than you need, I still wouldn't bother "down-sizing" those Originals -- particularly if you have made _any_ changes via adjustments or metadata. Change your camera settings, and just live with a little extra data spinning around.
Here is the page in the User Manual on relocating your Originals (click from the contents listed at the top).
Note, too, the following, from the page Basic Components of Aperture:
Using referenced images in your Aperture system provides a number of substantial benefits to your photography workflow. For example, you can incorporate your existing portfolio of images into Aperture without changing the current location of the files. Importing images by reference does not result in a duplication of your image files in the Aperture library, thus saving hard disk space. You can also connect and disconnect hard disks holding your referenced images’ masters as you need them. This allows you to keep masters for less-used images offline or to make specific types of images available for editing or adjustments as needed. Using referenced images in your Aperture system lets you build a flexible image management system customized to your work style. (Emphasis mine.)
For my personal Libary, I keep 4★, 5★, Portfolio Images, and anything recorded in the last 45 days on my laptop's system drive. Every other Original is relocated to a 2 TB external drive.
I find Previews _very_ useful (both in and out of Aperture), and even rely on them as a sort of emergency back-up of last resort. I recommend you rebuild yours. -
Is there a practical size limit on JPEG format image files?
I have noticed when working with Photoshop v7.0 on Windows XP that, when creating a JPEG format image file from a very large scanned image (more than 800 Mb, maybe), the .jpg file will usually be saved on disk at any of the possible compression ratios available, without any reported error, yet when the saved file is re-opened, an error is reported - something along the lines of "missing or corrupted end of file marker" - and the image cannot be loaded.
If before saving the original image is substantially reduced in size, e.g. by reducing the resolution of the image, a viable JPEG format file can be created, which will subsequently load successfully, though technically with data loss.
This appears to happen only with JPEG format files - PDF format files can be saved from the original image at similar JPEG compression ratios, without error on reloading.
I do not know if this also occurs with any other Photoshop versions. I am working with Adobe Photoshop v7.0 on Windows XP, although we are preparing to upgrade to CS (which version I don't know) in the near future, for different reasons to those which are detailed above.
Does anyone know if there is a technical explanation for this behaviour? Is there a file size limit for writing viable JPEG files (which Photoshop does not report as an error when exceeded)?
ThanksChris Cox wrote:
Where did you get the idea that we weren't doing something about it?
that's what I gathered from "JPEG cannot [...] in Photoshop (code difficult to replace)".
But if you say this is in the works right now, that's good news indeed.
Chris Cox wrote:
And where did you get the idea that posts get deleted? (other than SPAM)
Are you sure you're reading the same forum as the rest of us?
That's what happened:
The content you posted below was reported for abuse and removed by our
moderators:
Subject: Re: Is there a practical size limit on JPEG format image files?
Posted: 4/29/11 9:11 AM
Anyway, you gave an honest answer on this technical issue, Chris, and that's what counts. -
Before in iOS 6, whenever friends or family call my phone..i used to get the full screen call image of them...now ever since i updated to iOS 7...its a circle...is Apple bringing back the full screen call image thing or is it there in iOS 8?.
Please advise.We don't know what Apple is going to do until they announce it.
-
Hi Gurus,
Need to configure new payment term as described below
if a supplier ships on 10 May, that payment will only be due on 10 July.
But also if they ship on 29 May, the payment will also still be 10 July.
This is my first time so plz guide how to configure this.
regards
VBHi Ashish,
You need to do the following to achieve this
OME2
Maintain a day limit of 29, if that is your cutoff, and then in the Payment Term, please provide 0% and fixed date as 10 and additional month as 2 ( You can enter as per your scenario)
With this, all transactions done till 29th of May will be 100% due by 10th of July.
Kindly verify in test systems, I have not got a chance to test.
Hope this helps.
Regards
Shailesh -
iPhone 4s. 64GB. Recently installed iOS 8. The problem happened suddenly upon booting the phone. The screen content image is expanded way beyond the size of the screen. Therefore almost nothing is visible. It is possible to move different parts of the content into view, but this is very limited. Using fingers to try to shrink the screen content image does not work. I have tried booting by holding down the start button and the home button together. I still get the expanded screen content image. Finally, because of this problem I am unable to enter my passcode. Unfortunately I do not have a backup on my MacBook Air. iTunes will not recognize my iPhone because I have not entered the passcode.
Hi pm90,
Welcome to the Apple Support Communities!
It sounds like the Zoom feature may have been activated on your iPhone. I know the Zoom can be very frustrating when you cannot turn it off. Please follow the steps in the following article to disable the Zoom accessibility feature.
iOS: Home screen icons are magnified or large
Have a great day,
Joe -
Keeping Two Copies of Original Image in File
If I select Edit Content on a Smart Object layer, and then select Duplicate Layer, will that put two copies of the original image in the file?
I used the Place command to bring high resolution images into a canvas of a much lower resolution. I've already spent a lot of time scaling and positioning the images on the canvas. But it turns out, I would now like to do certain editing on the original pixels of the images because of their greater resolution. Of course, that defeats the purpose of Smart Objects for non-destructive editing.
But there's no reason I can't keep two copies of an original image in a file, and destructively edit only one copy, right?PECourtejoie wrote:
If you double-click the (non-linked) SO, you will be editing the embedded 6000 px document (and not the original file). If you select save as, you could save it as an independent document.
Now I see that double clicking on the Smart Object does the same thing as right clicking on the Smart Object layer and selecting Edit Contents. So that helps me understand what you have been saying.
PECourtejoie wrote:
I have to say that I'm a bit lost about "But I also want to save a copy of those original images without editing in the files."
I mean that I want to save the original, unedited images embedded in the same files as the files with all the work that I am doing. I am not linking to the original image files after I use the Place command. -
How to configure DNS ???
Hi everybody, please tell me how to configure DNS. Which file is needed configuring???
Thanks alot.Excuse me, maybe u miss understanding about me. I'm not going to keep that information for myself. I don't know that u are interested in it. I always wanna get knowledge from everybody and share my knowledge ,hope that it is useful to someone.
My problem was: i didn't assign defaultgateway to my networking interface (IP 192.168.1.45). I connect internet through a Lan (through another machine IP 192.168.1.12), so if i wanna to use DNS server, i must route my machine to Gateway in order to connect to DNS server.
Thank u for a straight quote. I'm Vietnamese. We are friends !!! -
My computer shows i have 24 gigs(image 1)but, it wont let me do the boot camp because it says i hve less than 10(image 2).
buy a bigger hard drive.
you can't take away so much from Mac volume as to leave it with less than 20%/20GB and have a functional OS.
And you can't install Windows 7 with just 24GB.
you can't use free space that is fragmented and not contiguous.
you would have to get a larger SSD - OWC Macsales has SSD for the Air - or off load as much as possible to free up an add'l 40GB, at a minimum.
SSDs need free space of their own to function and allow for degradation, provisioning, garbage collection.
You have what OX Lion needs, maybe, but none to spare for another OS.
You might be able to run Windows in a VM like VirtualBox or Parallels and try to "get away" with it, but not natively. -
Introduction
In SQL Server Reporting Services, we can define a mapping between the fields that are returned in the query to specific delivery options and to report parameters in a data-driven subscription.
For a report with a parameter (such as YEAR) that allow multiple values, when creating a data-driven subscription, how can we pass a record like below to show correct data (data for year 2012, 2013 and 2014).
EmailAddress Parameter
Comment
[email protected] 2012,2013,2014 NULL
In this article, I will demonstrate how to configure a Data Driven Subscription which get multi-value parameters from one column of a database table
Workaround
Generally, if we pass the “Parameter” column to report directly in the step 5 when creating data-driven subscription.
The value “2012,2013,2014” will be regarded as a single value, Reporting Services will use “2012,2013,2014” to filter data. However, there are no any records that YEAR filed equal to “2012,2013,2014”, and we will get an error when the subscription executed
on the log. (C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles)
Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportParameterException: Default value or value provided for the report parameter 'Name' is not a valid value.
This means that there is no such a value on parameter’s available value list, this is an invalid parameter value. If we change the parameter records like below.
EmailAddress Parameter Comment
[email protected] 2012 NULL
[email protected] 2013 NULL
[email protected] 2014 NULL
In this case, Reporting Services will generate 3 reports for one data-driven subscription. Each report for only one year which cannot fit the requirement obviously.
Currently, there is no a solution to solve this issue. The workaround for it is that create two report, one is used for view report for end users, another one is used for create data-driven subscription.
On the report that used create data-driven subscription, uncheck “Allow multiple values” option for the parameter, do not specify and available values and default values for this parameter. Then change the Filter
From
Expression:[ParameterName]
Operator :In
Value :[@ParameterName]
To
Expression:[ParameterName]
Operator :In
Value :Split(Parameters!ParameterName.Value,",")
In this case, we can specify a value like "2012,2013,2014" from database to the data-driven subscription.
Applies to
Microsoft SQL Server 2005
Microsoft SQL Server 2008
Microsoft SQL Server 2008 R2
Microsoft SQL Server 2012
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.For every Auftrag, there are multiple Position entries.
Rest of the blocks don't seems to have any relation.
So you can check this code to see how internal table lt_str is built whose first 3 fields have data contained in Auftrag, and next 3 fields have Position data. The structure is flat, assuming that every Position record is related to preceding Auftrag.
Try out this snippet.
DATA lt_data TYPE TABLE OF string.
DATA lv_data TYPE string.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = 'C:\temp\test.txt'
CHANGING
data_tab = lt_data
EXCEPTIONS
OTHERS = 19.
CHECK sy-subrc EQ 0.
TYPES:
BEGIN OF ty_str,
a1 TYPE string,
a2 TYPE string,
a3 TYPE string,
p1 TYPE string,
p2 TYPE string,
p3 TYPE string,
END OF ty_str.
DATA: lt_str TYPE TABLE OF ty_str,
ls_str TYPE ty_str,
lv_block TYPE string,
lv_flag TYPE boolean.
LOOP AT lt_data INTO lv_data.
CASE lv_data.
WHEN '[Version]' OR '[StdSatz]' OR '[Arbeitstag]' OR '[Pecunia]'
OR '[Mita]' OR '[Kunde]' OR '[Auftrag]' OR '[Position]'.
lv_block = lv_data.
lv_flag = abap_false.
WHEN OTHERS.
lv_flag = abap_true.
ENDCASE.
CHECK lv_flag EQ abap_true.
CASE lv_block.
WHEN '[Auftrag]'.
SPLIT lv_data AT ';' INTO ls_str-a1 ls_str-a2 ls_str-a3.
WHEN '[Position]'.
SPLIT lv_data AT ';' INTO ls_str-p1 ls_str-p2 ls_str-p3.
APPEND ls_str TO lt_str.
ENDCASE.
ENDLOOP. -
How does the adapter specific parameters gets filled up?
Hello,
How do I check adapter specific parameters?
like, I am making the Soap action parameter to dynamically fill in the receiver soap adapter.
I want to check if the correct (one of the 4 actions) action was filled in action field
how do I check?
thanks
nikhil.Hi,
You need to test the scenario from RWB testing to get the proper results about the dynamic settings for adapter specific parameters.
Refer
Accessing Adapter-Specific Attributes through User Defined Function
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70c89607-e4d9-2910-7280-f6746e964516
Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70c89607-e4d9-2910-7280-f6746e964516
Re: Adapter-Specific Message Attributes
setting adapter specific message attributes
Thanks
Swarup
Maybe you are looking for
-
How to get list of block identifiers in a empty table and an empty index
We have an application that has issue with ITL waits: this application is running many INSERT statements on a table that has 2 NUMBER columns and one primary key index. The application is designed to run INSERT statements but they are never committed
-
Im having issues! Its terrible. I press and hold the buttons.....it wont turn on. i need help because i dont want it to crash and lose all of my information on this ipod. I NEED HELP! WHATEVER ADVICE YOU HAVE WILL BE HELPFUL!
-
Hi, I posted the previous post as "Message Styled Text Fomatting" and i want to know after creating our own css classes, where we put css classes in our Server. Is there any HTML_TOP is there? Now i have the style sheet related to my requirement. I w
-
Can we call proxy communication channel of type XI in user defined function
HI , can any body tell whether we call proxy communication (type xi) in an user defined function regards sandeep
-
Problme with Multiple records input
I am trying to create a sales order application. It has Sales Order Header and Line Items & Sub-Line-Items. Sales Order Sales Order Header (cardinality: 1:1) Line-Item (cardinality : 1:n) Sub-LineItem (cardinality: 0:n) Line-Item has 8-10 inpu