How to configure and test workflow for Creating a leave Request?

Hi,
When I select leave request iView I get an R/3 screen titled "Create Leave Request".And when I fill in the details for approver and press send I get this error message "You are not one of the possible agents of the task".
So help required to configure and test the workflow behind Create leave request iView.
Regards,
Pavanmeet.

Pavanmeet,
you have to set all activities in the workflow to "general task" as well, not only for WS12300111 itself (doubleclick on each symbol with the "triangle").
check the status of the sent leave request in transaction PTARQ (Display Documents). Here the "next agent" & the "pers. no" of the next agent is of interest.
logon with the user, that is saved in infotype 0105 of the above mentioned pers.no. there should be the approve request.
you can check the status of the workitems with SWI1 (i assume your system is prepared for workflows , check SWU3)
Message was edited by: Achim Hauck

Similar Messages

How to configure and test workflow for Creating Leave Request

Hi,
When I select leave request iView in portals I get an R/3 screen titled "Create Leave Request".And when I fill in the details for approver and press send I get this error message "You are not one of the possible agents of the task".
So help required to configure and test the workflow behind Create leave request iView.
Regards,
Pavanmeet.

Pavanmeet,
you have to set all activities in the workflow to "general task" as well, not only for WS12300111 itself (doubleclick on each symbol with the "triangle").
check the status of the sent leave request in transaction PTARQ (Display Documents). Here the "next agent" & the "pers. no" of the next agent is of interest.
logon with the user, that is saved in infotype 0105 of the above mentioned pers.no. there should be the approve request.
you can check the status of the workitems with SWI1 (i assume your system is prepared for workflows , check SWU3)
Message was edited by: Achim Hauck

How to configure and test a workflow in CRM 5.0

Hi All,
As I am new to workflows it will be great if any of you shared a guide where I can create and test a workflow in CRM 5.0 tcode PPOMW.
Thanks for all your help in advance.
Best regards,
Divya

This might help:
http://help.sap.com/saphelp_crm50/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/cc/d40b37da4de72fe10000009b38f889/content.htm
Regards,
Kaushal

How to configure and save presets for custom scanning?

There are 5 presets in Acrobat XI for scanning files: "Autodetect...", "Black &White...", "Grayscale...", "Color Doc...", and "Color Image".
There is also an option to to do a "Custom Scan..." and "Configure Presets" (modify the 5 above).
However, I could not find any way to create my own custom presets.. is that not possible?
I was hoping to at least save my configuration(and/or possibly create a few different custom scan templates) in the Custom Scan for future scans but that was also not an option.
I would gladly use the 5 presets and configure them to how I want them but its unfortunate there are no output options there to automatically append a scan to an existing file or create multiple files from a continuous scan.
So... 1) Can you create custom presets for scanning? 2) Is there a way to configure output options in the existing scan presets? Thanks!

Pavanmeet,
you have to set all activities in the workflow to "general task" as well, not only for WS12300111 itself (doubleclick on each symbol with the "triangle").
check the status of the sent leave request in transaction PTARQ (Display Documents). Here the "next agent" & the "pers. no" of the next agent is of interest.
logon with the user, that is saved in infotype 0105 of the above mentioned pers.no. there should be the approve request.
you can check the status of the workitems with SWI1 (i assume your system is prepared for workflows , check SWU3)
Message was edited by: Achim Hauck

How to configure and test Profibus network using NI part number 780161-01 Master/Slave interface

I have purchased this board from NI. I have been in touch with Comsoft who it appears is the developer of this board. I have used the configurator II to try and build the network. The GSD file for my slave board is entered. I also can see the GSD file for the master. There appears to be no obvious way to test the bus from the configuration tool. I have tried the Express VI provided by Comsoft. Nothing happens. I have a purchased profibus cable with terminations installed. I know the cable works as another division has another Profibus master that does work using this cable How do I configure correctly for sure? How do I test?
Thanks
Rick
Solved!
Go to Solution.

Hi Rick,
First, ensure that you have the correct drivers installed on your system:
Make sure NI-VISA 4.2 or later is installed on your system.
First install 1.3x.x COMSOFT driver
Second install a DF PROFI II Slave and Master board in your PC-System.
Reboot your computer System.
Install the NI-PROFIBUS driver, instructions can be found here.
However, it sounds to me like you may have an issue with your bus configuration or with the GSD file. First, did you obtain the GSD file from the manufacturer or from profibus.com?
Also, common issues with the configuration include specifying an improper baud rate (supported baud rates can be found here), or an incorrect PROFIBUS address. Were you able to successfully save the bus configuration and generate the configuration database? Were you able to load the configuration database into the master device successfully as well?
If you are unable to resolve this issue, can you provide me with some more information about your system setup and error? What PXI chassis are you using, version of LabVIEW, operating system? What devices are you testing on the bus?
Julianne K
Systems Engineer, Embedded Systems
Certified LabVIEW Architect, Certified LabVIEW Embedded Systems Developer
National Instruments

Best workflow for creating games for pc and starling games in AIR

best workflow for creating games for pc and starling games in AIR.
I need to develop for tablets with starling and AIR as well as for pc without starling ie: downloading from a server.
In starling you have to
1. instantiate starling
2. use texture atlases for loading graphic assets - well its the recommended way
3. use juggler
etc...
ie: with all these differences is it best to:
1. create completely different projects
2. just create different classes for the starling specific parts
3. use a conditional compile constant
    eg: CONFIG::STARLING
            "then do this"
or      CONFIG::CPU
          "then do this"
I currently have the latter but it feels a little messy. I would prefer separate classes for each platform where the image loading is concerned.
There must be so many game developers out there but in large gaming companies that know exactly what to do. Perhaps you can point me in the right direction with a book or something.
CHEERS

The other thing is that I can't see the games being very different as you suggest. I have downloaded Lee Brimelows tut on creating a starling game on Lynda.com and the code is great for creating games using states for menu, play, gameover etc... The only difference is that he uses texture atlas and there is a great difference in loading them etc... so technically you would only need to handle them in a different class as collision and the rest of game play should be the same in both. I think!!!
Well, actually not exactly but near enough - maybe it might be easier to create separate projects and just cut and paste the new code introduced.

How to install mdk in nwds for creating mobile applications

Hi experts,
how to install mdk in nwds for creating mobile applications?
reward points for appropriate answer.
Thank you,
G.V.K.Prasd

HI,
MDK is already integrated in NWDS. Separate MDK download is only necessary in case you want to use Eclipse as single DEV environmant without the full blown NWDS orwant to develop for earlier versions like MI7.0.
So very important: separate MDK does only support MI7.0 and earlier versions. If this is your intention, simply download MDK plugin, extract the folder, have a look into the download subfolder and you see the ECLIPSEPLUGIN.ZIP file in there. Unzip this as well and then put the related stuff into the FEATURES and the PLUGINS folder of Eclipse. After restarting Eclipse open the settings and add the buttons to the view and configure the correct settings for your system. This is the normal stuff like for every Eclipse plugin. Not 100% sure if this is not included in NWDS as well already.
If you are not sure about PLUGINS and FEATURES stuff and the configuration - the MDK itself has a great documentation that shows the steps you need to follow.
Regards,
Oliver

How to configure and use KM

Hi Experts,
Iam new to KM.We need to configure KM for our client. When I surfed internet ,I can see only explanation on KM but I need steps for configuration and details about how well KM can be used. Share me the documents,procedures and steps to configure and use KM.
Currently Iam working on KM Navigation Iview and I have following doubts
1) Is there a way to allot some space in KM automatically when users are newly created.Under Userhome link of KM , for the newly created users a seperate link is automatically created .Do I have to assign that to user for using KM.
2)Can we restrict space for each user in KM.
3)How to configure and customize context menu in KM navigation iview.
Regards
Karthiheyan Murugesan

Hi Karthiheyan,
Still I have further requirement like How to transfer all datas of KM from one server to a new server for all the users (also how to create back up?
Through KM Tranport you can transport the contents from server to server
For KM content transport go through the below help document
http://help.sap.com/saphelp_nw70/helpdata/en/46/7649426fd759dbe10000000a1553f6/frameset.htm
How to customize the various options like view , actions ,settings present under Details option?
For the context menu of folder New->Forms->...How to restrict this forms visibility?
        This can be done using the Layout set,there you will be having collection render,resource render,details setting through which the options can be customized and the customized layout should be used in field layout set in the KM Navigation Iview.For further understanding go through the below document.
http://help.sap.com/saphelp_nw70/helpdata/en/30/504a1e7f0e354bbf9adedf1a29f3ec/frameset.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/504e31fc-f46f-2910-98b4-dd94478c22f8?QuickLink=index&overridelayout=true
Naga

How to deploy and test J2ME application on handset???

Hi all,
I write an application using j2mewkt toolkit and generated all jad and jars.It's working fine on test models but want to test it on handset.Can naybody tell me how to deploy and test it on Handset,what basics i required,kindly tell me step-by-step as i m novice in J2ME.
thanx

STEP-1
Create the package - In the J2ME Wireless Toolkit Menu Select "Project"-"Package"-"Create Package". It creates jar and jad file in the bin directory.
STEP-2
Converting this file from m/c to device : There are many tools to transfer your midlet suites to your device. for example MIDWay Tool
The MIDWay tool allows you to download MIDlet suites to your developer-enabled device via SERIAL CABLE. Please note this is a preview of the tool included in the upcoming Motorola SDK for J2ME v3.1. The MIDWay v2.6 preview only supports the following devices : V60i, V66i, T280i, T720, T720i, A830
For this tool to work properly your device must be enabled for development and the "Java
STEP : 3
Open the jad file from Midway Appplication in which it imports the jad file and export it to the device. This is done by jam (Java Application Manager) takes responsibilities for this function i.e., the jad file is installed to the device. After installing it u can test as same as in emulator.

How to configure Automatic Account Clearing for A/R

Hi,
Kindly advice me how to configure Automatic Account Clearing for A/R
The client requirement is
In A/R the customer accounts are not automatically clearing when a payment is posted for that account. We are still seeing all open items and all paid or cleared items when we go to FBL5N and select open items for viewing. Please make account clearing automatic for customer payments.
Thanks in advance
Sunitha

Hi,
Use T code OB74.
Maintain for your Chart Of Account, acct type "D", From and to customer accounts and then add the critera you want. Pls note you cannot define more than 5 criteria.
Then schedule the clearing program job F.13 in the background.
Cheers.

How to configure oracle thin drivers for SUN APPLICATION SERVER

hi all,
I am working with EJB with oracle as back-end. I wants to know how to configure oracle thin drivers for the SUN APPLICATION SERVER. Please explain me breifly.
Advanced thanks to all the replies.
with regards,
/kumaraswamy.n

Kumaraswamy,
Did you try searching the Internet? Here are the results of my Internet search:
http://tinyurl.com/zo4gk
And one of the first hits in the list was this:
Deploying to a Sun Java System Application Server
Good Luck,
Avi.

How to configure Oracle Enterprise Manager for ASM RAC Database ?

Dears,,
We have two databases (Primary & Standby), each database has two instances
Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
How to configure Oracle Enterprise Manager for this environment ?
I need documentation for this please.
Many thanks & Regards,,

Assuming an agent is running on the servers you want to monitor,
navigate to the Agent home page (Via setup --> Agent)
When in the agent home page select 'Add Database'and press [Go]
Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
When done, press [Ok] to return to the agent home page.
Regards
Rob
http://oemgc.wordpress.com

C240 M3 Stuck at "Configuring and testing memory .."

Hi,
This server's just been returned to us from Cisco, who had it on loan since it was new. We're trying to put it back into service, but have hit the following problem.
On first power-up the server gets as far as the "Configuring and testing memory .." message. Just that message, it doesn't show any progress in actually testing memory. After a few seconds it shuts itself down, then spins up again, repeating that a couple of times before sitting with the "Configuring and testing memory .." message at the top of the screen, but now also showing CIMC IP address at the bottom. All four LEDs above the power button show steady green, and the unit ID buttons switch the blue LED on/off as they should.
I can get to the CIMC login screen, but the password's been changed from default so can't get any further in that direction until we find out the new user/password details. Unless someone knows how to reset CIMC to default.
I've tried the following recovery steps ..
(1) If we set the "Clear CMOS" jumper J2065, the server won't power up. It powers up to standby, but does not respond on pressing the power button.
(2) Using the "BIOS recovery" jumper J2068 doesn't appear to have any effect, the server does not read the recovery file from USB flash drive.
Any ideas?
Thanks,
Tony S

Cheers. There's not much to reseat at this stage. The server came back with two CPUs of unknown type, I've removed and set those aside in case they're some sort of weird CPU that needs a special memory configuration.
We've fitted a single E5-2609 as CPU1 and single DIMM in A1. There are no PCI cards or anything else to reseat. As a matter of fact the server behaves exactly the same if there's no memory at all, making me think it's hanging up before starting the memory check.
I would love to get into the CIMC, but does anyone know a way to reset the username/password other than via the BIOS screens (which aren't accessible).
Thanks, Tony S

How to configure Symantec Mail Security for SMTP & Messaging Server 6.3

Hi!
I want to install a Symantec Mail Security for SMTP 5.0.1(host1) with Messaging Server 6.3 (in production - host2), but when I try to access to POP protocol to send a message from Internet, the system display a message with a relay problem.
- Could you help me with this issue?,
- Do you know some documentation that speaks of this?. I can't find any documentation that explain how to configure and integrate SMS and Messaging Server. Thanks in advance.
Regards, CR

ctemp1 wrote:
I want to install a Symantec Mail Security for SMTP 5.0.1(host1) with Messaging Server 6.3 (in production - host2), but when I try to access to POP protocol to send a message from Internet, the system display a message with a relay problem.I take it that you have configured the symantec software like this?
internet -> symantec mail security system -> sun messaging server -> recipientA better approach is the following
internet -> sun messaging server -> recipient
                          |
                         V
              symantec mail security system(refer here: http://blogs.sun.com/factotum/entry/messaging_server_correctly_deploying_the)
- Do you know some documentation that speaks of this?. I can't find any documentation that explain how to configure and integrate SMS and Messaging Server. Thanks in advance.There is no documentation specifically for symantec software but we do document how to send emails via the symantec mail security server using the aliasdetourhost channel keyword:
http://docs.sun.com/app/docs/doc/819-4428/6n6j42615?a=view#bgaqy
Regards,
Shane.

Jms adapter configuration and testing

Hi,
Please inform the JMS adapter configuration and testing.
Thanks
Naidu

Hi,
tried to reach JMS adapter but was not sure about what to inform it with
Ok, just being silly there... About your problem:
Overview - not complete and a little dated but notetheless good starting point
Exploring JMS and SAP-XI JMS Adaper
JMS FAQ Note - valuable official statements for various questions. Many linked notes which may also be of interrest
http://service.sap.com/sap/support/notes/856346
Driver deployment note
http://service.sap.com/sap/support/notes/1138877
Some other valuable links provided by Chirag Gohil
Re: jms senarios
HTH for starters
Cheers
Jens

How to configure and test workflow for Creating a leave Request?

Similar Messages

Maybe you are looking for