How to configure and use informatica development platform ?

Samples and documentation for the Mapping API are, as far as I recall, part of the PowerCenter client installation; open a Windows explorer and look into the client installation directory tree, you should be able to find it fast. As of my knowledge there's nothing comparable to the Mapping API available for the Developer yet. You have two choices (which I see at this moment):Hope that Informatica v10 will contain this feature.Create your objects in PowerCenter using the Mapping API. Then export all objects from PowerCenter to XML files in the format used by the Developer and import these XML files into the Developer (infacmd.sh importFromPowerCenter should prove helpful here). Regards,Nico

Hi Could some help me in using IDP to create the intormatica mappings dynamically?Basically I am looking to configure the environemnt to use the design APIs. Any help would be appriciated!! One more point I need to ask, whether Informatica provide any design APIs for data vurtulization( i.e creating logical data objects dynamically in developer tool and create the IDS on that ) Regards,Nikhil

Similar Messages

How to configure and use jboss cache

Hi,
I need to use Jboss Cache in our application,
But i don't know anything about Jboss Cache...
can u tell me requirements and configuration for this?
and i am using jboss application server 3.2.3..
and apache-ant-1.7.1, jdk1.6.0_06, jbosscache 2.2.0
can u tell me how to configure and use jboss cache?
Thanks & Regards
Thilkumar

Go to the JBoss web site and read up on the documentation there.
And if you still have any questions you'll probably get better answers at the JBoss forums than in these forums.
- Roy

How to Configure and Use Oracle's JMS Connector with Tibco EMS

Jeff,
I am getting the below exception while try to do the deployment of the sample provided on 'How to Configure and Use Oracle's JMS Connector with Tibco Enterprise for JMS'
While deployment not able to get the 'TibcoJMSReference',
As I understand in the 'orion-application.xml for the below, unable to get the instance. Could you adivce how I can enable the trace more?
<resource-provider class="com.evermind.server.deployment.ContextScanningResourceProvider" name="TibcoJMSReference">
could you help to resolve the issue?
Error
Operation failed with error: No resource named 'TibcoJMSReference/TibcoXACF'found

Hi,
I'm also looking for the same 'Configure and Use Oracle's JMS Connector with Tibco JMS to consume message'. If you have already implemented and working fine, please let me know the steps and some documents.

How to configure and use StartTLS on Windows AD server (2008 R2 or 2012) ?

I would like to use port 389 with secure ldap using StartTLS, i.e ldap over TLS. I could not find documentation to configure and use ldap over tls using port 389 with the implementation of StartTLS command. Though I could find documentation on secure ldap
on port 636. Please help.

Hello,
see about self-signed certificates in
http://support.microsoft.com/kb/321051/en-us and how to enable them in AD.
Please see if steps in
https://kb.meraki.com/knowledge_base/certificate-requirements-for-tls will help you.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

How to configure and use labview using java

I want to configure and use labview in my application using java, please help me out with a solution how i can configure it (like providing input to labview and getting output from labview in java ).
Thanks,
ATF

Did you try a search?
Or: How Do I Integrate Java with National Instruments Software Products?

How to configure and use KM

Hi Experts,
Iam new to KM.We need to configure KM for our client. When I surfed internet ,I can see only explanation on KM but I need steps for configuration and details about how well KM can be used. Share me the documents,procedures and steps to configure and use KM.
Currently Iam working on KM Navigation Iview and I have following doubts
1) Is there a way to allot some space in KM automatically when users are newly created.Under Userhome link of KM , for the newly created users a seperate link is automatically created .Do I have to assign that to user for using KM.
2)Can we restrict space for each user in KM.
3)How to configure and customize context menu in KM navigation iview.
Regards
Karthiheyan Murugesan

Hi Karthiheyan,
Still I have further requirement like How to transfer all datas of KM from one server to a new server for all the users (also how to create back up?
Through KM Tranport you can transport the contents from server to server
For KM content transport go through the below help document
http://help.sap.com/saphelp_nw70/helpdata/en/46/7649426fd759dbe10000000a1553f6/frameset.htm
How to customize the various options like view , actions ,settings present under Details option?
For the context menu of folder New->Forms->...How to restrict this forms visibility?
        This can be done using the Layout set,there you will be having collection render,resource render,details setting through which the options can be customized and the customized layout should be used in field layout set in the KM Navigation Iview.For further understanding go through the below document.
http://help.sap.com/saphelp_nw70/helpdata/en/30/504a1e7f0e354bbf9adedf1a29f3ec/frameset.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/504e31fc-f46f-2910-98b4-dd94478c22f8?QuickLink=index&overridelayout=true
Naga

How to configure and use verity search peoplesoft?

Hi All,
I have installed Veirty on pshome..Now how to configure it to use for searching in peoplesoft environment.
Our environment is,
Peopletools 852(app server) and Oracle 10g on Solaris Sparc10
HCM 9.1FP2 application
Thanks in advance.

There is an entire chapter in PeopleBooks devoted to Verity Search
PeopleBooks > PeopleTools 8.52: System and Server Administration > Configuring Verity Search and Building Verity Search Indexes
PeopleBooks > PeopleTools 8.52: PeopleCode API Reference > Verity Search Classes
I would strongly advise you to have a look at Secure Enterprise Search that was introduced in PeopleTools 8.52. More powerful, out of the box integration with PeopleSoft for global search and search pages and full declaratie from PeopleSoft pages.
PeopleBooks > PeopleTools 8.52: PeopleSoft Search Technology > Understanding PeopleSoft Search Framework

How to Configure and Use Oracle's JMS Connector with Tibco Enterprise

Following the advice here: http://www.oracle.com/technology/tech/java/oc4j/1013/how_to/how-to-connect-to-tibco/doc/how-to-connect-to-tibco.html
I believe I need to provide a username and password for the Tibco JMS provider, and would like to know the correct way. Is this right, in orion-application.xml
    <resource-provider class="com.evermind.server.deployment.ContextScanningResourceProvider" name="TibcoJMSReference">
        <property
            name="java.naming.factory.initial"
            value="com.tibco.tibjms.naming.TibjmsInitialContextFactory">
        </property>
        <property
            name="java.naming.provider.url"
            value="tibjmsnaming://jleinawe-sun:7222">
        </property>
<property name="java.naming.security.principal" value="user" />
<property name="java.naming.security.credentials" value="password" />
    </resource-provider>

This is kind of up to Tibco...
When you add properties to the resource-provider element, you are just adding entries to a Map which gets passed to the initial context factory, which in this case is implemented by Tibco (TibjmsInitialContextFactory), so you may want to check their docs.
It's possible they only use that for username/password for JNDI access purposes and not for JMS. If so, you can explicitly set username/password for outbound connections in the oc4j-ra.xml file, and using ResUser/ResPassword in the MDB's activation-spec to set username/password for inbound connections.
-Jeff

How to configure and use Groupware portlets in weblogic portal 10.3.2

Hello All,
Weblogic 10.2 (home = c:\bea\102) and Weblogic 10.3.2 ( home = c:\bea\103) are installed on our systems and we downloaded the" wl_groupware_portlets_oracle103-10.3.0_win32.exe " file from "edelivery.oracle.com" and tried to install then it gave some exception for tool.properties file. To run it in 10.3.2 we copied tools folder from c:\bea\102 to c:\bea\103 and then setup ran successfully in c:\bea\103.
But still groupware facet in not visible in IDE.
Any quick help would be highly appreciated.
Thanks,
Alka

See this thread.
Error Installing Groupware Portlets for WLP 10.3.2
Brad

How to configure and deploy OAM 11g with DB setup using silent mode

Hello all,
I am trying to create automation process to install and configure OAM 11g on WLS. This task involves three stages
1. Install WLS
2. Install OAM 11g
3. Create DB schema using RCU
4. Configure and deploy OAM 11g
I have done first 3 stages in silent mode using scripts and response files. I am stuck at 4th stage. I know how to configure and deploy OAM 11g using config.sh via GUI installer as well as console mode. But I would like to run config.sh in silent mode something like
./config.sh -mode=silent -silent_script=<script_location>
I have searched a lot, but could not find any resource on how to do it? I tried passing the parameters via a text file. But that has not worked. I have also explored WLST, but it also does not work. Given that first 3 things are relatively very simple, the 4th step is becoming complex. I would be very thankful if someone can please point me in the right direction.
Thanks!

Have a look at your software directory : <sofware directory>/Disk1/stage/Response
Here you will find 2 rsp files which you can use to install and then configure it all.
Good luck.
Filip

How to config and start reports developer on Linux

Hi, I installed Oracle9iDS on redhat7.2, which includes jdeveloper, forms developer and reports developer. How do I configure and start reports developer? What are the commands I should use?
Thank you a bunch.
Yingping Huang

Hi,
Please go through the Reports 9i documentation at http://otn.oracle.com/docs/products/reports/content.html.
Thanks,
Rohit

How to create and use dynamic queue in JMS

Plz tell me how to create and use a dynamic queue in jms and can reciever file lookup it as it lookup any server configurred queue(written in the server).

Hi,
We can use Azure File services to do this, for more information, please have a look at this article:
http://blogs.msdn.com/b/windowsazurestorage/archive/2014/05/12/introducing-microsoft-azure-file-service.aspx. The Azure File service exposes file shares using the standard SMB 2.1 protocol. Applications running in Azure can now easily share files between
VMs using standard and familiar file system APIs like ReadFile and WriteFile.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Hello guys..does anybody know how to install and use adobe master collection with the new lion? I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem... I am a new mac users and I'd like t

Hello guys..does anybody know how to install and use adobe master collection with the new lion?
I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

Lab79 wrote:
Are you on Apple's payroll?
well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
good luck with apple dude..
Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
<The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
Great suggestion. You should go with that one, but good luck getting a refund.
Bye

How to configure the use of WS-RM in "PI 7.11 EHP1?

How to configure the use of WS-RM in "PI 7.11 EHP1?
Currently in the editing window of the communication channel (adapter type WS), I can not see any options regarding Reliable Messaging protocol (WS-RM).
The scenario that is required is as follows.
(Consumer WS-RM) -> (Provider WS-RM PI 7.11 EHP1) -> (ABAP Proxy Backend NW 7.0)
I would greatly appreciate any help,
Thanks,
Roger.
Edited by: Roger Solano on Apr 7, 2011 10:31 PM

WS adapter supports WS Reliable Messaging. But WS adapter is used to communicate between two SAP web service runtime.
Check this blog and its links for understanding direct connection or point to point communcation using WS adapter
/people/william.li/blog/2008/02/13/point-to-point-connection-using-abap-in-sap-using-pi-71
Hoe that helps.

How to configure mail using portal collaboration

hi Guys..,
pls tel me
how to configure mail using portal collaboration and its uses..
thanks
regards
kamal

Hi,
Two Configure Email, first
You have to create a System for Groupware through System Administration ->System Configuration -> system LandScape
Then create a Groupwaretransport
implement SSO between your Mail server and your EP...
and finally
Create a Mail service...
More Info is available at below link..
http://help.sap.com/saphelp_nw04/helpdata/en/7c/6a469702474146a8ef2f97fe880b2f/frameset.htm
and have a look at the thread raised by be on Calender Configuration...
Collaboration calendar : No transport has been configured for the calendar
Regards,
Srinivas

How to configure and use informatica development platform ?

Similar Messages

Maybe you are looking for