How to configure backup device

Hii,
I have fresh install 4.7 with sql 2000 database . I want to take backup of my database in other drive . how i will configure this drive .
thanks & regards
jagdish

hi,
you want to take backup using DB13 or from SQL server enterprise manager,
if you want to take backup on network drive the drive must be map and accessible through windows.
configure backup devices on MS SQL Server management Studio,
logon to SQL server management Studio,
under object explorer navigate through server object -> backup devices
create new backup device -- destination file type. give path for your network drive backup folder.
regards,
kaushal

Similar Messages

  • Configure backup device in SAP(DB13)

    I have installed the ECC 6.0 with SQLServer 2005 ,now I want to
    configure the backup device in it. I am using external hdd for backup.
    Please suggest me how to configure backup device in SAP(DB13) and
    database level.
    where I have to set the parameters for backup device.
    Thanks

    Hi..
    You need to configure initSID.sap inside Kernel.
    Choose backup device type to disk
    backup_dev_type = disk
    and change backup root directory
    backup_root_dir = < Your_External_HDD_adress>
    e.g. G:/backup/
    Hope it should work....
    Regards,
    Abhimanyu
    Edited by: Abhimanyu Pandey on May 21, 2009 9:02 AM

  • How to configure output device option

    DEAR ALL ,
                      I have been facing problem in taking printout in line printer(lp04)  with page dimension 305 mm * 215mm for transaction mb90--> output type -->we03 which is not giving the option to choose output device type before print preview option. how will i configure output device for standard output types.

    Hi sonu sonu,
       For Your concern you have to discuss with BASIS whehter printer(lp04) with page dimension 305 mm * 215mm is present or not.
       Or else go thru SPAD and check whether that printer has that Page Format or not ???
    Regards,
    Suneel G

  • How to configure backup parallel in SAP with oracle database?

    Dear SAP,
    We need your suggestion on oracle database backup parallel using brbackup, our SAP system run on:
    OS: UNIX - SUN Solaris SPARC 10
    SAP: ECC 6.0 SR3
    Database: Oracle 10.2.0.4
    Our production database are growing rapidly, estimate growing is 2GB/days. Right now we backup our Production using one tape that estimated time to online backup is 4-5hours.
    In there future, if we stayed this configuration. It will take long time to backup and restore it's not applicable. That's why we are planning to add more tapes during backup (4 tape parallel).
    I read from help.sap, that we can configure this on $ORACLE_HOME/dbs/init<SID>.sap. in parameter:
    compress = harware
    backup_dev_type = tape
    tape_address = (tape1, tape2, tape3, tape4)
    tape_address_rew = (tape1, tape2, tape3, tape4)
    http://help.sap.com/saphelp_nw04/helpdata/en/88/a2a041a5d4af4db168992639d65d3b/frameset.htm
    My question,
    If we want to backup parallel using 4 tapes, is this configuration that we need to do (init<SID>.sap) from sap side (DB13)?
    Thanks and Best Regards,
    Widi

    Dear Mark,
    Thanks for your help. actually I have one more question:
    How do I restore my backup form this 4 tapes, if I'm using parallel backup?
    Will the command same like I restore form 1 tape:
    example:
    brrestore u2013b beczqlnk.ant u2013m full
    brrestore u2013a 5371-5372=/oracle/<SID>/oraarch/
    Below are the paramter that I will configure:
    - tape_address = /dev/rmt/0cbn
    - compress = hardware
    - backup_dev_type = tape
    - exec_parallel = 4
    - tape_size = 1600000
    - tape_address = (dev/rmt/0mn, /dev/rmt/1mn, ..)
    - tape_address_rew = (dev/rmt/0m, /dev/rmt/1m, ..)
    Appreciate you help and suggestion on this.
    Dear Venkat,
    thanks for your suggestion

  • How to configure backup network in Network Load Balancing?

    Some time ago I failed to find proper discription, how backup Network should be configured in NLB, because it seems to be too many options here. I´m having troubles in MBAM, its IIS autherization failing with error code 401 when dedicated FQDN adress is
    used which points to NLB cluster. More information about my MBAM problem is here:
    https://social.microsoft.com/Forums/en-US/a0dbe7d9-6440-42f2-99e1-21563647764f/mbam-25-installation-on-2-web-servers-as-ha-with-nlb-an-error-has-occurred-on-helpdesk-website?forum=mdopmbam
    Now I need to know, what is the proper way to configure NIC and TCP/IP in NLB hosts. As I see it, there are few options but which one is the one?
    1. On hosts, 1st NIC is with domain IPs, 2nd NIC is direct IP to another´s host 2nd NIC. This is the way how it should be done in Fail-Over Cluster, but this method does not seem to work witn NLB at all. Cluster adress does not respond.
    2. On hosts, 1st and 2nd NIC is configured both to domain Network, same subnet. 2nd nic does not have default gateway. This method works somehow, but displays error in NLB console, when cluster is created.
    3. On hosts, there is only one NIC to domain Network and no backup Network at all. This probably requires multicast mode? In MBAM HA documentation, NLB is discribed as unicast.
    Hosts, meaning nodes, are 2012 R2 and located on Hyper-V 2012 R2. MAC spoofing is enabled.
    - An additional side question - is it true, that NLB feature is not so reliable, and non-Microsoft hardware NLB is recommended for big companies, or
    did I just mess my NLB configuration so bad?

    Hi yannara,
    When you use NLB cluster node with multiple NIC, you can choose different NLB mode, such as
    Single network adapter in unicast mode
     A cluster in which ordinary network communication among cluster hosts is not required and in which there is limited dedicated traffic from outside
    the cluster subnet to specific cluster hosts.
    More detail how to select NLB mode you can refer the following KB:
    Clustering Technologies
    http://msdn.microsoft.com/zh-cn/library/cc784941(v=ws.10).aspx
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to configure backup server

    Basis Gurus,
    I have a problem.Can anyone tell me the step the ,how
    can i configure the backup server
    regards
    gopal
    Thanks in advance

    We don't know
    - your backup software
    - your backup medium
    - what you want to backup
    This doesn't seem to be a SAP problem - contact the vendor of your backup software.
    Markus

  • ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (ex., 5 min) using the SLA?

    I have ASA 5505 8.4.  How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
    Or as something else to implement it?
    My configuration for SLA monitor:
    sla monitor 123
     type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
     num-packets 3
     timeout 3000
     frequency 10
    sla monitor schedule 123 life forever start-time now
    track 1 rtr 123 reachability

    Hey cadet alain,
    thank you for your answer :-)
    I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
    Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
    3
    Nov 21 2011
    18:29:56
    77.xxx.xxx.99
    59068
    80.xxx.xxx.180
    80
    TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
    The attached file is only the show running-config
    Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
    Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
    Regards.
    Chris

  • HT201250 How can I determine which Time Machine backups can be deleted to free space on my backup device?

    Time Machine keeps hourly backups for the past 24 hours, daily backups for the past month, and weekly backups.
    But are they all incremental or full backups?
    How can I determine which can be deleted to free space on my backup device?
    Thanks.

    Thanks.
    So, if TimeMachine only makes one full backup the first time a backup is taken, and then automatically removes backups as space is needed, is there a danger that there can come a point where no single restore point exists?
    I find Apple's lack of detail around this topic disappointing. It's such an important thing.
    I guess TimeMachine doesn't work quite how I want it too. Seems to be true of so many Apple products!

  • HT4946 How do I backup ALL of my iPad content onto a newly purchased MacBook Air? I can't backup up apps or music from CDs through the device backup function.

    How do I backup ALL of my iPad content onto a newly purchased MacBook Air? I can't backup up apps or music from CDs through the device backup function.

    First you need to authorize your MBA with your iTunes account with iTunes if you haven't already done so.
    With your iPad connected and without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPad. This will transfer/copy all iTunes content on your iPad that was purchased/downloaded from the iTunes store only.
    Photos on your iPad that were transferred from your old computer need to be transferred from your old computer to your MBA.
    Before syncing contacts with the Address Book and calendar events with iCal if you aren't syncing this content over the air with an iCloud account, enter one contact in the Address Book and one calendar event in iCal on your MBA. Make these up if needed, which can be deleted later. This will provided a merge prompt with the first sync for this data, which you want to select.
    Photos/videos in the Camera Roll can be imported by your MBA with iPhoto or the Image Capture application.

  • How to configure LOCA (o/p Device)

    Hi Freinds,
    Whenever i execute T code SPAD and press F4 in output device it show only one o/p device. But we want to configure LOCA o/p device. Can you help me how to configure it.
    Thanks,
    Rd,
    Sachin

    Hi,
    I think we cant do direclty from Smartform output to Binary
    we can do one thing
    1) [smartform output to PDF|convert smartform output into pdf]
    2) [PDF to Binary.|Re: how to convert pdf  to binary]
    hope it helps you.
    Regards!

  • WCS - "Configuration Backup" failed. How to debug?

    In WCS, the backgroun task "Configuration Backup", to back up configurations from the controllers, is returning a "Backup Failed" message. How do I troubleshoot? Are they detailed logs somewhere, either via the WCS GUI or via the Linux command line?
    thanks,

    Same problem here...
    I just upgraded my 3GS to iOS5 and signed into iCloud using my Apple ID...
    Every time I click "Back Up Now" in the iCloud preferences on the iPhone, I get "There was a problem completing the backup.  Please try again later."
    On my wife's iPhone 4, I just performed a back up and there were no errors.  I tried this also on my wife's iPad 2 and it worked perfectly.
    I have tried the following:
    1. In iTunes, when my phone is connected, I selected "Back up to iCloud" on the summary tab
    2. Reset my phone using the steps in the above post
    3. Deleted the iCloud account on my iPhone and logged in again
    4. Tried to backup from 3 different wireless networks
    None of the steps above fixed the issue which has been going on all day for me...
    Any other help would be great - thanks!

  • How do I transfer "device backup files" to a new computer?

    How do I transfer "device backup files" to a new computer?

    Place the domain file in your Home/Library/Application Support/iWeb folder.  If there's no iWeb folder create one and put it in there.  Now try to launch iWeb and see if it will find and open the Domain file.
    If you still can't open the domain file do the following:
    To open your domain file in Lion, Mountain Lion, Mavericks or Yosemite or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script"/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"
    delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    NOTE: Since Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    For Mavericks and Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring the this window:

  • How does apple Configurator Backup App data? Or does it at all?

    Hello,
    I use Apple Configurator at two schools. All of the iPads that the schools own are supervised via Apple Configurator.
    How does the backup feature work in Apple Configurator? I know it backs up folders and photos and videos. But does it backup app data? And how?
    I understand that apps themselves are not backed up. But if an iPad is completely wiped / restored via apple configurator / apps are put back on / then backup is restored.... when does the app data get re-applied (if it does at all?)
    Mac OS 10.9.4
    Apple Configurator Version 1.5 (424)
    I know iTunes can backup and restore app data. My question is does Apple Configurator do it? And how / what is the best way?
    Thank you.

    When you boot yoru iMac, if you hold down the option key, at the boot meny, do you have an option for "Network" booting  If so, then your machine didn't come with an install disc, it allows for internet restore form Apple servers (although it will need to perform the 4.7GB download if you use it).
    If you run the Boot Camp Assistant, you should be presented with an option to download the windows support files from Apple servers.  For machines which didn't come with install/restore discs, this is the way to get the files you need.

  • How to configure a map of patches names of my midi device in order to insert program changes from Logic?

    How to configure a map of patches names of my midi device in order to insert program changes from Logic?

    Thomjinx wrote:
    You can usually use a patch editor-librarian program like Sound Diver or MidiQuest to copy and paste the patch names (one bank at a time) into the patch name list of a multi-intsrument object in the environment.
    That's what I do.  Works like a charm.
    Cheer,
    Thomjinx
    "My first copy of Logic came on Floppy disks"
    And you will need to setup bank change commands for your particular instrument, if it does in fact have several banks of internal patches. Logic comes with a selection of bank change commands, one of them will almost always work.
    My first copy of Logic came on floppies, two of them I think and was MIDI only, moved up to Logic_Audio at version 3.0 I think.

  • Backup device configure

    Dear Team,
    I am using SAP 4.7 with oracle 8.1 on Windows 2000 Server
    I want to take backup in different drive i.e  F Drive
    Please let me know how to do Online and Offline backups?
    thnaks
    Kumar

    Hi Alpesh,
    I have read the post , and its quiet useful..What i need to know more about it is I need to give the Path for my External Tape Drive.
    I have defined the type as Tape.
    backup device type
    [tape | tape_auto | tape_box | pipe | pipe_auto | pipe_box | disk
    | disk_copy | disk_standby | stage | stage_copy | stage_standby
    | util_file | util_file_online | rman_util | rman_disk | rman_stage
    | rman_prep]
    default: tape
    backup_dev_type = tape
    I have to define the Path how can i tell the system to backup to Extrenal tape drive.
    backup root directory [<path_name> | (<path_name_list>)]
    default: $SAPDATA_HOME/sapbackup
    backup_root_dir = $SAPDATA_HOME/sapbackup
    Thanks
    Adnan

Maybe you are looking for