How to configure BODS in network environment with NAT ?

Hi Team,
Now we are working on POC of BO Data Services 4.0 with SI partner and they reported us that a communication error (error code:BODI-1241023) occurred when they started a job from Designer.
They can do it without any problems in the following two cases.
1. from Designer which is installed in the CMS/JobServer machine
2. from Designer which is installed in local PC within internal network (without firewall / NAT)
That is, the cause is Firewall with NAT(Network Address Translation) between Designer and JobServer/CMS.
And, they can log on to CMS/JobServer with NAT environment, however, cann't start a job from Designer.
The port #3500 for JobServer is open. They confirmed that they could log on to the JobServer in the event log
of the JobServer.
That is, Designer -> CMS/JobServer communication is OK, but JobServer -> Designer communication must be NG.
Could you advise us how to configure BODS both client and server sides in the network environment with NAT ?
Thanks and best regards,

HI Buddy,
You can achieve this by $FLEX$, create first value set, and assign it to first field. Create second value set based on first value set using $FLEX$.
follow steps mentioned in the bellow link
http://erpschools.com/articles/usage-of-flex

Similar Messages

How to configure a new product type with a new operation deal?

hello, All,
I wonder to know if somebody knows, how to configure a new product type with a new operation deal with the amortization divided?, I mean in the SPRO, portfolio of securities with the characteristics mentioned.
Hope you help me.
Bests regards.

Hi Prasad,
Thanks for the information, but the directions that you give me not be useful, I want that the UPDATE TYPE appears in the position cash flow in the transaction deal in the option-->operative valuation area( 2nd option) or in the report TPM13, this for two treasury ledger dates.
I mean that the update type "samxx" affect the accountant as amortization divided?, this transaction deal is a purchase.
Thanks in advanced

How to configure airport extreme to work with Actiontec gt701d modem

I have been trying to set up a new Actiontec modem to work with a new Airport Extreme with no luck. I don't know what the right settings are to get it to work correctly. So far the only way I have been able to get the two to work together is to have the AE connect with ethernet and bridge mode. However with this configuration I can't setup a guest network which I would like to be able to do. I have read some past posts and have tried other configurations but end up either losing internet connection or getting a very slow connection. If anyone has some idea how to get this modem to work with the AE i would really appreciate some advice
Thank you

Welcome to the discussion area, Meagan!
The Actiontec "modem" that you mention is really a gateway...a combination modem/router, so with this device and the AirPort Extreme, you have two routers on the network.
Whenever you have two routers on a network, the first router must be configured to handle the main routing chores and any other routers must be configured in Bridge Mode to function correctly. So, Bridge Mode is the correct setting for the AirPort Extreme when used with the Actiontec gt701d gateway.
In order for the AirPort Extreme to provide a Guest Network, it must be configured as the "main" router on a network. This won't be possible unless you can re-configure the Actiontec device to act as a simple modem, not a router. You might want to check with Actiontec support to see whether this might be possible.
Message was edited by: Bob Timmons

How to configure Oracle 8 to work with Weblogic portal4.0

Hi! I'm trying to configure my portal to work with oracle8i using thin driver.I've set classes12.zip in the classpath.But if I set the DATABASE=ORACLE_OCI value inthe set-environment.sh file the server does not start.Pls help.

Here's the error log it throws for the problem:
: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:258)
at weblogic.security.SecurityService.initialize(SecurityService.java:115
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:390)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
'>

How to Configure Oracle Management Server (OMS) with Dataguard Broker

Dear Experts,
i have a production DB (192.168.200.9) 9.2.0.1.0 on Server 2003
i have a standby DB (192.168.200.19) 9.2.0.1.0 on Server 2003
Archive logs are shipped to standby database and applied there. *(Datagauard is configured).*
Now i want that Graphically i want to see that archivelogs are shipping to standby database and applied there ( i want to configure Dataguard Broker in graphical mode (*dataguard manager*) isnt it ( bcz i anm bit confused with this).............?
*1.* For this purpose to achieve i take some seperate machine install on it Server 2003.
*2.* and then Install oracle db 9.2.0.1.0 ( here i will install FULL DATABASE, CUSTOM installation ( then createsome repository).
*3*. can i configure this repository for OMS on my already running production or standby DB............?
*4.* After this OMS is configured or not..........?
*5.* how i will configure datagauard broker
what i know regarding this is on primary and standby db *( DG_BROKER_START = TRUE)* and after
this we have to create some configuration wizards but how
i think i have to go with this sequence if somebody has different sequence tellm e
wait for replies
thanks in advance
regards rehan
faisalabad pakistan

Does anybody dont know anything about this.................?

How to configure Netgear FA510C Network Card

I installed Solaris 8 (Intel) on my laptop(Compaq Presario
1275) and have NetGear FA510C network card to be
configured. When I installed Solaris, it didn't recognize
the network card, and I have no idea how to configure
this network card. Does any have any idea how to
install and configure this network card?
I'll appreciate your help.
cwpak

Try to use devfsadm -v to find the device
Then use ifconfig dnet0 (not positive this is the right syntax for SMC) to plumb the device.
Then use ifconfig dnet0 192.168.50.4 up
You may have to modify these files to get the IP to come up on startup and properly resolve:
/etc/hostname.dnet0
/etc/netmasks
/etc/resolv.conf
/etc/defaultrouter
/etc/nodename

How to configure Pro*c/c++ environment Oracle 8.1.7 for RedHat 7.0

Hi All,
I have installed oracle 8.1.7 on red-hat-linux7.0. but I don't know how to configure the environment for Pro*c/c++ programming.
Anxious, urgent, someone can tell me!
thank millions, and best of luck
john.

Oracle 9iAS Documentation can be found at,
http://technet.oracle.com/docs/products/ias/content.html
You can access few samples of web query in
Oracle JSP demos, from your iAS Apache main page. There are XML, JDBC and SQLJ samples.

How to configure MySQL to be used with J2EE 1.3.1 -- Very Very URGENT.

Hi All,
I have downloaded Sun's J2EE reference implementation 1.3.1. I want to use MySQL as my database instead of the default database Cloudscape that comes with J2EE SDK 1.3.1. Can any one help me configuring in doing the same.
Thanks and regards,
Venky.

Hi! I had the same problem, too. I�m Brazilian and I�ve been learning the English language yet, but I�ll try to describe how to configure J2EE with MySQL.
I am using MySQL version 4.1.7 with J2EE version 1.3 on Windows XP Professional. The driver version of MySQL is 3.0.16.
You have to configure the following two files:
- <J2EE_HOME>\bin\setenv.bat
- <J2EE_HOME>\config\resource.properties
Do the following steps:
1) Copy the JAR file of MySQL driver (mysql-connector-java-3.0.16-ga-bin.jar) to <J2EE_HOME>\lib directory.
2) In <J2EE_HOME>\bin directory open the setenv.bat file and analize the code. It is not hard to understand the code, it is just the classpath configuration of J2EE. After understand it, add a reference of MySQL driver (mysql-connector-java-3.0.16-ga-bin.jar), that was copied to <J2EE_HOME>\lib directory.
3) Run the <J2EE_HOME>\bin\j2eeadmin.bat to configure the resource.properties file.There are two command lines to be executed, as below:
- j2eeadmin.bat -addJdbcDriver <CLASS NAME OF THE DRIVER>
- j2eeadmin.bat -addJdbcDatasource <JNDI NAME> <URL>
For example:
- j2eeadmin.bat -addJdbcDriver "com.mysql.jdbc.Driver"
- j2eeadmin.bat -addJdbcDatasource "jdbc/mysql/test" "jdbc:mysql://localhost/test?user=username&password=pass"
4) After run j2eeadmin.bat, the resource.properties file will be modified. But when I did it and when I executed the verbose command to start J2EE, some error messages was exhibited. So I decided to open the resource.properties file and I noticed that the character "\" was added erroneously in a lot of places of the code. It did not seem correct, so I decided to remove these characters replacing them. Bingo!!! After I did it, I run verbose again and no more message error ocurred. I think it is a bug of J2EE.
Finish! I modified the datasource JNDI to access MySQL and then I run my EAR application. No problems occurred. My application is running succesfully.
Good luck!

How to configure dbconsole on R12.1 with 11g database on RHEL AS 5(64-bit)

Hi Dear
I want to configure dbcosnole on R12.1 with 11g database. When i start it by executing the command emctl start dbconsole it does not start. It shows the following error:
OC4J Configuration issue. /u01/oracle/PROD/db/tech_st/11.1.0/oc4j/j2ee/OC4J_DBConsole_dg.orientpower.com.pk_PROD not found.
I will highly appreciate, if anybody could help me to resolve this issue.
Thnx
Jabbar

You might want to checkout
http://download.oracle.com/docs/cd/E11882_01/install.112/e10813/dbcacrea.htm#sthref287
Oracle® Real Application Clusters Installation Guide
11g Release 2 (11.2) for Linux and UNIX

How to cripple your XML DB environment with one statement

The following COULD CRIPPLE YOUR ENVIRONMENT. It's just an example so you will be aware of the possibility...
(Tested it on a VMware environment with Oracle Enterprise Edition 10.2.0.3.0 fresh installed, See also here: http://technology.amis.nl/blog/?p=1444)
The following is executed under SYSTEM...
SQL> conn system
Connected.
SQL> CREATE OR REPLACE TYPE XMLTYPE AS OBJECT
2 (X INT
3 )
4 /
Type created.
SQL> CREATE TABLE XML_TEST
2 (ID NUMBER(10,0) NOT NULL
3 ,FAKE_XML XMLTYPE
4 )
5 /
Table created.
SQL> desc XML_TEST
Name Null?
Type
ID NOT
NULL NUMBER(10)
FAKE_XML
XMLTYPEOne would expect somehow that XMLTYPE would be a "preserved" word.
Mark, if you see this post; what do you think?. I will test and create an SR for this, BUT are there other "types" which should be protected?
Message was edited by:
mgralike

To show that it shouldn't be happening or it is at least inconsistent behavior, two examples one with "XMLTYPE" and one with "DATE"...
SQL> CREATE OR REPLACE TYPE MYDATE AS OBJECT
2 (X INT
3 )
4 /
Type created.
SQL> drop type mydate;
Type dropped.
SQL> CREATE OR REPLACE TYPE DATE AS OBJECT
2 (X INT
3 )
4 /
CREATE OR REPLACE TYPE DATE AS OBJECT
ERROR at line 1:
ORA-02302: invalid or missing type name
SQL> CREATE OR REPLACE TYPE XMLTYPE AS OBJECT
2 (X INT
3 )
4 /
Type created.
SQL> show user
USER is "SYSTEM"Message was edited by:
mgralike

How to configure and deploy OAM 11g with DB setup using silent mode

Hello all,
I am trying to create automation process to install and configure OAM 11g on WLS. This task involves three stages
1. Install WLS
2. Install OAM 11g
3. Create DB schema using RCU
4. Configure and deploy OAM 11g
I have done first 3 stages in silent mode using scripts and response files. I am stuck at 4th stage. I know how to configure and deploy OAM 11g using config.sh via GUI installer as well as console mode. But I would like to run config.sh in silent mode something like
./config.sh -mode=silent -silent_script=<script_location>
I have searched a lot, but could not find any resource on how to do it? I tried passing the parameters via a text file. But that has not worked. I have also explored WLST, but it also does not work. Given that first 3 things are relatively very simple, the 4th step is becoming complex. I would be very thankful if someone can please point me in the right direction.
Thanks!

Have a look at your software directory : <sofware directory>/Disk1/stage/Response
Here you will find 2 rsp files which you can use to install and then configure it all.
Good luck.
Filip

How to Configure Multiple Portal Middle Tiers with a Load Balancing Router

Hi,
Portal version trying to install 10.1.2 on Windows 2003 boxes.
I am following the guide http://download.oracle.com/docs/cd/B14099_19/portal.1012/b14037/cg_advnc.htm#i1046354. I have InfraStructure installed on a different box and am trying to install 2 Portal Midtiers each on separate boxes and using LBR. The above document is kind of confusing as I am trying to following
5.3.1 Step 1: Install a Single Portal and Wireless Middle Tier (M1)
5.3.2 Step 2: Configure OracleAS Portal on M1 to Be Accessed Through the LBR (AND FOLLOW ARE THE STEPS 1 to 14 in sequence)
if I follow 1 to 14 steps in sequence the information is not consistent what is being listed in the following sections
5.4.1 Create Virtual Hosts
5.4.2 Configure OracleAS Web Cache
5.4.3 Register OracleAS Portal with OracleAS Single Sign-On
i.e.
ptlconfig -dad portal -sso -host www.abc.com -port 7779
ptlconfig -dad portal -sso -host www.xyz.com -port 7779
as in the above steps it says to run
ptlconfig -dad portal -wc -site
and ssoreg command that always fails because I am running it from midtier as it gives error saying invalid username/password
as oppoesed to steps listed in point 8, 9, 10, 11 and 12.
Can someone please privide the steps in sequence I need to follow when installing 2 midtiers with frontend LBR and one infrastructure. I am trying to follow the architecture listed in the above link.
Any help is really appreciated.
Thanks

Hi,
Will appreciate any inputs on the following.
I am planning to install Infrastructure and one Midtier BI Forms Reports Discoverer, Portal on one windows box and the second midtier BI Forms Discoverer, Portal on the second windows box.
Please correct me if I am wrong on installing and configuring the mid-tiers as following are the steps I have compiled going through the document and want to make sure this time I do it right.
As I'll be installing BI Forms Reports Discoverer, Portal so wondering when I install the second midtier do I need to unselect all Portal, Forms, Reports, Discoverer or just the Portal I need to unselect.
Also in the host file of both the windows boxes do I just need to keep the LBR IP Address entry and remove the rest.
LBR:_
Computer Name: bigip5.prd.com
IP Address: *167.123.2.5*
Listen Port: *80*
Invaidation Port: *9401*
Infrastructure:_
Computer Name: portal1.prd.com
IP Address: *167.123.2.6*
Oracle HTTP Server Listening Port: *7777*
Application Server Control port: *1800*
M1 (Portal & BI Forms Reports Discoverer):_
Computer Name: portal1.prd.com
IP Address: *167.123.2.6*
Oracle HTTP Server Listening Port: *7778*
OracleAS Web Cache Listening Port: *80*
OracleAS Web Cache Invalidation Port: *9401*
OracleAS Web Cache Administration Port: *9400*
Web Cache Statistics port: *9402*
Application Server Control port: *1810*
M2 (Portal & BI Forms Reports Discoverer):_
Computer Name: portal2.prd.com
IP Address: *167.123.2.7*
Oracle HTTP Server Listening Port: *7778*
OracleAS Web Cache Listening Port: *80*
OracleAS Web Cache Invalidation Port: *9401*
OracleAS Web Cache Administration Port: *9400*
Web Cache Statistics port: *9402*
Application Server Control port: *1810*
First to create MetadataRepository and then Install Infrastructure and then follow the below steps to install Midtiers
Install and Configure of M1 (Portal and BI Forms Reports Discoverer):-_
*5.3.1 Step 1*: Install a Single Portal and BI Forms Reports Discoverer (M1 i.e. portal1.prd.com)
*5.3.2 Step 2*: Configure OracleAS Portal and BI Forms Reports Discoverer on M1 to Be Accessed Through the LBR
*1.* Configure LBR
*2.* Follow Section 5.4.1.1 to create the Virtual Host for bigip5.prd.com (LBR) and portal1.prd.com (M1)
*3.* Define a site that matches the virtual host entry for bigip5.prd.com (LBR) on Webcache of M1
*4.* Use OracleAS Web Cache Manager on M1, to map the site bigip5.prd.com (LBR) to middle tier portal1.prd.com (M1).
Follow steps 5 and 6 as per the document
*7.* Configure bigip5.prd.com (LBR) to accept invalidation requests from the OracleAS Metadata Repository on a separate port i.e. 9401
*8.* Change iasconfig.xml on M1
*9.* run ptlconfig -encrypt
*10.* Register the URL changes with OracleAS Portal by running ptlconfig -dad portal -wc -site
*11.* No need as it is http only
*12.* Run the follwoing
MID_TIER_ORACLE_HOME_M1\sso\bin\ssoreg.bat
-site_name bigip5.prd.com
-mod_osso_url http://bigip5.prd.com:80
-config_mod_osso TRUE
-oracle_home_path MID_TIER_ORACLE_HOME_M1
-config_file MID_TIER_ORACLE_HOME_M1\Apache\Apache\conf\osso\osso.conf
-admin_info cn=orcladmin
-virtualhost
*13.* Edit targets.xml to enable monitoring of the LBR's front-end host and port settings for OracleAS Portal
+<Property NAME="PortalListeningHostPort" VALUE=http://bigip5.prd.com:80/>+ and then run
MID_TIER_ORACLE_HOME_M1\bin\emctl reload
*14.* Test the setup
Install and Configure of M2 (Portal and BI Forms Reports Discoverer):-_
*5.3.4 Step 4*: Install a Single Portal and BI Forms Reports Discoverer (M2 i.e. portal2.prd.com)
*1.* As I am installing on wiondows so will not set IASCONFIG_LOC environment variable as I can just copy the iasconfig.xml file from M1 to M2
*2.* Run OUI on M2
*3.* Clear the selection for OracleAS Portal but don't know if I need to unselect Forms , Reports, Discoverer also.
*4.* Enable OracleAS Portal
*5.3.5 Step 5:* Configure the New Middle Tier (M2) to Run Your Existing Portal
*1.* Create both virtual hosts as done on M1
*2.* Copy dads.conf, oradav.conf, cache.conf, web.xml from M1 to M2
*3.* Re-register mod_osso on M2. To do this, perform the following steps by copying osso.conf from M1 to M2
*4.* Synchronize the DCM by using the following command
MID_TIER_ORACLE_HOME_M2/Apache/Apache/bin/ssotransfer MID_TIER_ORACLE_HOME_M2/Apache/Apache/conf/osso/osso.conf
*5.* Run dcmctl updateConfig
*6.* add the necessary mod_rewrite and mod_oc4j directives to the httpd.conf and mod_oc4j.conf files respectively
*7.* Restart Oracle HTTP Server on M2
*8.* Access the OracleAS Web Cache Manager on M1 and follow steps 9,10,11,12,13,14,15,16 for Webcache seetings and clustering.
Also will appreciate if can get some info on the following:
*1.*
When I configure the Webcache as per the Document but if I bring down one Midtier Instance the requests are not going to the other Instance that is up and ignores the case whether an instance is down. Any idea how what and where do I need to provide any setting which in case of instance is down routes the requests to the one that is up.
*2.*
What exactly happens when it says To enable monitoring of the LBR's front-end host and port settings for OracleAS Portal edit target.xml. Is this for LBR to find if an Instance is down or not and route the requests appropriately.
Thanks again for all the help.

How to configure Airport Extreme to work with Spotify

Issue: Spotify no longer syncs Spotify files to my iMac or my iPhone despite me being a premium member. I've never had an issue with this until this past week. I can't see anything that has changed but I must be missing something. Anyhow...I'm posting this here because I need assistance with my Airport Extreme configuration (not Spotify).
According to Spotify, I am to configure my (Airport Extreme, latest gen) router to allow the following:
The following IP ranges should be open on port 4070:
78.31.8.0/21
193.182.8.0/21
The number 21 is the prefix length.
I've assigned the static IP to my iMac and my iPhone. I've also forwarded port 4070 (Public & Private UDP and TCP) to my iMac's static IP. I also tried it on my iPhone. What I don't know about is how to open the IP Range on that port as stated above.
Any idea where this can be done? Thanks!

Welcome to the discussion area, Meagan!
The Actiontec "modem" that you mention is really a gateway...a combination modem/router, so with this device and the AirPort Extreme, you have two routers on the network.
Whenever you have two routers on a network, the first router must be configured to handle the main routing chores and any other routers must be configured in Bridge Mode to function correctly. So, Bridge Mode is the correct setting for the AirPort Extreme when used with the Actiontec gt701d gateway.
In order for the AirPort Extreme to provide a Guest Network, it must be configured as the "main" router on a network. This won't be possible unless you can re-configure the Actiontec device to act as a simple modem, not a router. You might want to check with Actiontec support to see whether this might be possible.
Message was edited by: Bob Timmons

How to configure airport extreme to work with my G-5?

My G-5 in connected to the ethernet with a modem
I need help in configuring an Airport Extreme as a wireless base station

Base station?
One of these?
Does your G5 have an Airport Extreme card installed?
You need one to connect once a network is created.
How to Set Up the AirPort Extreme | Macinstruct

How to configure wireless Cisco 1041/EAP2 with Radius

Hello,
Having trouble configuring wireless on a Cisco 1041 with a 2012 Radius Server
I have a cisco ASA 5505 and Windows server 2012 Radius with NAP and Network Security policy
Guest Test guest works, test does not, I want the users to log into test with their AD credentials
Here is the AP config:
Thanks for any help
o service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap1
logging rate-limit console 9
aaa new-model
aaa group server radius rad_eap
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa group server radius rad_eap2
server x.x.x.x auth-port 1645 acct-port 1646
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authentication login eap_methods2 group rad_eap2
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
clock timezone -0500 -5
clock summer-time -0400 recurring
ip domain name ser.local
dot11 syslog
dot11 ssid test
   vlan 1
   authentication open eap eap_methods2
   authentication network-eap eap_methods2
   authentication key-management wpa
   mbssid guest-mode
dot11 ssid test guest
   vlan 12
   authentication open
   authentication key-management wpa
   mbssid guest-mode
   wpa-psk ascii 7
dot11 priority-map avvid
dot11 phone dot11e
power inline negotiation injector 001b.8fac.990a
power inline negotiation prestandard source
class-map match-all _class_data_policy0
match ip dscp default
class-map match-all _class_voice_policy0
match ip dscp ef
policy-map voice_policy
class _class_voice_policy0
set cos 6
policy-map data_policy
class _class_data_policy0
set cos 0
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 1 mode ciphers aes-ccm
encryption vlan 12 mode ciphers aes-ccm
ssid ihiCorp
ssid ihiGuest
antenna gain 0
mbssid
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
service-policy input data_policy
service-policy output data_policy
interface Dot11Radio0.12
encapsulation dot1Q 12
no ip route-cache
bridge-group 12
bridge-group 12 subscriber-loop-control
bridge-group 12 block-unknown-source
no bridge-group 12 source-learning
no bridge-group 12 unicast-flooding
bridge-group 12 spanning-disabled
service-policy input data_policy
service-policy output data_policy
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
no keepalive
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface GigabitEthernet0.12
encapsulation dot1Q 12
no ip route-cache
bridge-group 12
no bridge-group 12 source-learning
bridge-group 12 spanning-disabled
interface BVI1
ip address x.x.x.x 255.255.255.0
no ip route-cache
ip default-gateway x.x.x.x
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
radius-server attribute 32 include-in-access-req format %h
radius-server host x.x.x.x auth-port 1645 acct-port 1646 key 7
radius-server vsa send accounting
bridge 1 route ip
line con 0
line vty 0 4
end

in order I get these messages;
The processing of Group Policy failed. Windows attempted to read the file \\test.local\sysvol\test.local\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
A LDAP connection with domain controller IHIserver01.ihi-press.local for domain TEST is established.
A fatal alert was received from the remote endpoint. The TLS protocol defined fatal alert code is 48.

How to configure BODS in network environment with NAT ?

Similar Messages

Maybe you are looking for