How to configure canon ir 2250 to send scans to emails via exchange server 2010

Hello
I have one question:
How to configure canon ir 2250 to send scans to emails via exchange server 2010?

Hi,
Based on my research, the member limit of a distribution list depends on the scalability and performance of your environment:
http://blogs.technet.com/b/exchange/archive/2009/02/19/3407003.aspx
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

How to configure Mailbox Read-Only access for Mailbox's owner on Exchange Server 2010?

I have to configure the Exchange Server 2010's mailbox to only grant Read-Only Access on the mailbox's owners. So they can only allowed to read their messages and cannot modify or remove them. Are there any references or methods to do?

Hi,alexchy8
We can make use of 2 PowerShell commands to achieve this goal.
Add-MailboxPermission and Add-MailboxFolderPermission.
Execute the Add-MailboxPermission command to delegate the read permission at mailbox level.
Execute the Add-MailboxFolderPermission command to delegate the required permissions on specific folders inside the mailbox.
You can read the following article as reference:
http://www.exchangedictionary.com/articles/assign-read-only-mailbox-permission-on-exchange-2010-2013-powershell
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards.

Can we send bulk email through exchange server 2010

can we send bulk email through exchange server 2010

You can do this however not sure I would recommend that since if people complain they are getting spammed it could effect your production servers domain/IP, i.e. it could get black listed. Personally I always recommend using a different system for
email blast to protect my production IP addresses and also to keep the load off of exchange as well as email marketing systems have built in capabilities for reporting, opt in/out capabilities etc.
All of that said perhaps you can tell us more about what exactly it is you want to do and how often?
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope

Accept AS400 to send email to Exchange Server 2010

Settings on Exchange to accept emails from our AS400

Exchange Receive Connector is responsible for receiving emails.
You can refer to the following article to know how to configure the connector:
http://technet.microsoft.com/en-us/library/bb690954(v=exchg.141).aspx
If you have further questions, please let me know.
Thanks.

I need send and receive emails for edge server 2010

i have exchnage 2010 in our orgnization now working fine , i can send and receive emails for hub and also we have tmg and fortigate firewall(200B) , already install and configuration edge server(configure edge subscribtion file and edge sync) but still message
sent form hub and also receive form hub , what to do to receive from edge ? please help me i have 3 month search to fix his problem.

Hello,
I recommend you use the Test-EdgeSynchronization cmdlet to check if the subscribed Edge Transport servers have a current and accurate synchronization status. If you have configured EdgeSynchronization successfully, please delete send connector
on Hub transport server.
Please uncheck "anonymous users" on receive connector for Hub server.
Please follow the ExchangeITPro's suggestion to check DNS MX record.
Cara Chen
TechNet Community Support

Set time restriction for specific user to send email via exchange server

Is it possible with Exchange server to limit certain users to sending their mail (Outlook/Exchange) only between designated
times? Thanks.
Babu

Hi Babu,
Based on my knowledge, Exchange has no built-in function to restrict some users sending their messages in a period of time. Your understanding will be appreciated.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Exchange Server 2010 - Problem configuring my server 2008 so my clients can use Outlook to send/receive e-mails

Hi,
I am new to the servers and domains stuff. Therefore i have setup succesfully a Server 2008 R2 server with AD, DHCP, DNS roles installed. I configured the roles as i wanted and then i installed Exchange Server 2010 so the clients can use Outlook to send
receive mails in and out of the domain.
I can send/receive mails inside the domain (disalfa.com) but i cannot send/receive mails outside the domain. I configured the Exchange properly, i am sure of that. I am 99,9% i did something wrong with the DNS (A records, MX records, etc.).
Also is there something i must do from the control panel of the site i purchased the domain name and the mails?
Can someone guide me so i can manage to work this out?
Server 2008 - 192.168.1.250
Registered Domain - disalfa.com
Thank you in advance

Hi ,
I recommend you refer to the following article to configure your external mail flow:
Configure Internet Mail Flow Directly Through a Hub Transport Server
Prerequisites
Register MX resource records for all accepted domains in a public domain name system (DNS) server. Consult the documentation of your DNS provider for information about how to register MX records for your domain. Detailed procedures about how to complete
this step are outside the scope of this topic.
Configure network gateways to allow SMTP traffic to and from the Hub Transport server. Consult the documentation for your network routers and firewalls for information about how to route SMTP traffic to and from the Hub Transport server. Detailed procedures
about how to complete this step are outside the scope of this topic.
Best regards,
Niko Cheng
TechNet Community Support

How to configure IPS 4240 - K9 to send log file to syslog server

I am looking for the commands in how to configure IPS 4240-k9 to send log file to SYSLOG server. If anybody has or came across similer issue please advice.
Thanks in advanced.

Ali -
I am sorry to tell you, but the Cisco IPS Sensors do not send Syslog messages. Your only options for sending signature event information are:
SDEE (an TLS Encrypted XML formatted message) the sensor is the SDEE Host and your event receiver (MARS, IME, Intelitactics, etc) is the client.
SNMP Traps - You need to set the "Action" on each signature you want the sensor to send a trap.
- Bob

When sending attachment in email the image is so large it takes up the screen, how do i make it normal, when sending attachment in email the image is so large it takes up the screen, how do i make it normal

when sending attachment in email the image is so large it takes up the screen, how do i make it normal, when sending attachment in email the image is so large it takes up the screen, how do i make it normal

In the Mail app, open the help menu. You will find your answer under "add attachments"

How do I change my iMessage from sending from my email instead of my number? I went into settings and where I'm suppose to change where I send and recieve from it doesn't say anything about changing to a number but changing to another email account.

How do I change my iMessage from sending from my email instead of my number? I went into settings and where I'm suppose to change where I send and recieve from it doesn't say anything about changing to a number but changing to another email account.

WHen you go into iMessage settings at the top it will say your email account you are using for iMessage, press that and it will give options. Press sign out and it will use your current phone number if you're using an iPhone, if you're using an iPod then it will turn iMessage off. P.S. it doesn't sign you out of your itunes account for iTunes and all that, just for iMessage

How to install and configure Exchange Server 2010 DR (disaster recovery) on Windows server 2012.

We need to install and configure Exchange Server 2010 with DR(disaster recovery on Server 2012.
Pls suggest step by step.
Pankaj Kumar

Hi,
Here is an article which may help you for your reference.
Deploying High Availability and Site Resilience
https://technet.microsoft.com/en-us/library/dd638129(v=exchg.141).aspx
Besides, there is a related thread here.
https://social.technet.microsoft.com/Forums/exchange/en-US/577c9433-a20b-442e-8ce7-be59aea35855/preparation-for-deploying-exchange-2010-servers-at-remote-site-dr-site?forum=exchangesvrdeploylegacy
Hope this is helpful to you.
Best regards,
Belinda Ma
TechNet Community Support

When sending e-mail messages to a mail-enabled public folder that have been replicated from old Exchange Server 2000/2003/2007, Exchange Server 2010 environment mails are rejected with NDR.

Hi, I would like to share with you issue that I’ve solved regarding mail-enabled PF that migrated from Exchange 2000/2003/2007 to 2010, I’ve searched & contacted my MVP leader – there’s no official KB regarding this issue right
now, so I’m posting here in order to share this among others.
Note: There’s article(s) that talked about PF replication from Exch2000/2003/2007 to 2010 – this is the same issue as well.
Symptoms
E-mail messages that been sent to mail-enabled public folder in Exchange Server 2010 environment rejected with the following NDR:
“#< #5.2.0 smtp;554 5.2.0 STOREDRV.Deliver.Exception:ObjectNotFoundException; Failed to process message due to a permanent exception with message The Active Directory user wasn’t found. ObjectNotFoundException: The Active Directory
user wasn’t found.> #SMTP#”
Sometimes Exchange Server 2010 is documented as well Event ID 1020 on the Event Viewer with this information:
“Log Name: Application
Source: MSExchange Store Driver
Event ID: 1020
Level: Error
Description:
The store driver couldn’t deliver the public folder replication message "Hierarchy ([email protected])" because the following error occurred: The Active Directory user wasn't found.”
Cause
In an environment where Microsoft Exchange Server 2000 or Microsoft Exchange Server 2003 previously existed, and all those servers have been removed, there is a chance that an Administrative Group (First Administrative Group or another custom Administrative
Group) remains with a Servers container, but no servers inside it.
During replication, when the Exchange 2010 Store Driver sees the empty Servers container in Active Directory, it's expecting a System Attendant object inside the container and when it is not found the error occurs.
Resolution
To work around the issue, delete the empty Servers container. This can't be done through Exchange System Manager. Use the ADSI Edit tool to remove it using the following steps:
Warning If you use the ADSI Edit snap-in, the LDP utility, or any other LDAP version 3 client, and you incorrectly modify the attributes of Active Directory objects, you can cause serious problems. These problems may require you to reinstall Microsoft Windows
2003 Server, Microsoft Windows Server 2008, Microsoft Exchange 2010 Server or both Windows and Exchange. Microsoft cannot guarantee that problems that occur if you incorrectly modify Active Directory object attributes can be solved. Modify these attributes
at your own risk.
1.
Start the ADSI Edit MMC Snap-in. Click Start, then
Run, and type adsiedit.msc, and then click OK.
2.
Connect & Expand the Configuration Container [YourServer.DNSDomainName.com], and then expand
CN=Configuration,DC=DNSDomainName,DC=com.
3.
Expand CN=Services, and then CN=Microsoft Exchange, and then expand
CN=YourOrganizationName.
4.
You will see an empty Administrative Group. Expand the
CN=YourAdministrativeGroupName.
5.
Expand CN=Servers.
6.
Verify there are no server objects listed under the
CN=Servers container.
7.
Right click on the empty CN=Servers container and choose
Delete.
8.
Verify the modification, and try to send again the E-mail to the mail-enabled public folder.
Applies to
Exchange Server 2010, Standard Edition
Exchange Server 2010, Enterprise Edition
Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
| E-mail: [email protected]

Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

Send As, Send on Behalf and Full Access for Exchange server 2010/2013

[This FAQ contains 2 parts]
Testing and watching the behavior of Send As, Send On Behalf and Full Access permission.
Common issue and Troubleshooting on the three permission.
[Testing and Watching]
Based on following blog, I decide to test on my lab:
Full Mailbox Access Rights + Send On Behalf = Send As ?
http://blogs.technet.com/b/ehlro/archive/2012/04/06/full-mailbox-access-rights-send-on-behalf-send-as.aspx
Description on my lab and test:
Exchange 2010 + Outlook 2010
Exchange 2013 + Outlook 2013
Senders: A01, A02, … , A07, A08
Recipient: A09
A01 grand permission to other senders.
Two methods:
a. Use A0x’s credential configure A01’s profile, then send From both A01 and A0x via Outlook. Watching result in A09’s Inbox and Sent Items which has message copy left.
b. Use A0x’s credential configure A0x’s profile, then send From both A01 and A0x via Outlook. Watching result in A09’s Inbox and Sent Items which has message copy left.
Result as following forms:
1. Exchange 2010 + Outlook 2010 / Exchange 2013 + Outlook 2013
Using A0x’s credential configure A01’s mailbox, then send From both A01 and A0x
To A09.
2. Exchange 2010 + Outlook 2010 / Exchange 2013 + Outlook 2013
Using A0x’s credential configure A0x’s mailbox, then send From both A01 and A0x
To A09.
[Common Issue]
1. [Issue]
Exchange 2010 + Outlook 2010. A01 grand A03 Send As permission. However A03 can’t send as A01 to A09 and get NDR:
You can’t send a message on behalf of this user unless you have permission to do so. Please make sure you’re sending on behalf of the correct sender, or request the necessary permission. If the problem continues, please contact your helpdesk.
Details as following pic:
[Troubleshooting]
1) Based on the NDR, it seems a permission issue. Check Send As permission, however the Send As permission configured correctly. Pic as below:
2) ince the Send As permission configured correctly, it seems the permission hasn’t been replicated. Try to restart Microsoft Exchange Information Store service. It works.
Note: The Send As permission isn’t granted until after replication has occurred. Replication times depend on your Exchange and network configuration. To grant the permission immediately, stop and then restart the Microsoft Exchange Information
Store service.
2. [Issue]
Exchange 2013 + Outlook 2013. A01 grand A03 Send As permission. However A03 can’t send as A01 to A09 and get NDR:
Your message did not reach some or all of the intended recipients.
Subject: xxx
Sent: xx/xx/2014 8:20 AM
The following recipient(s) cannot be reached: A09
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
Details as below:
[Troubleshooting]
1) Also check the Send As permission configuration first.
2) Then try to use A03 send as A01 to A09 via OWA. If OWA works well, it seems and issue on the Outlook client side.
3) This behavior may occur if the OAB in Outlook isn’t updated. Try to download OAB manually.
4) If doesn’t work, please close Outlook and try to delete all the OAB folder on your computer. The path of OAB folder in Win7, Win8 as below:
\Users\<UserName>\AppData\Local\Microsoft\Outlook\Offline Address Books
5) Restart Outlook.
Note: Be aware that you cannot send e-mail messages on behalf of a mailbox if the mailbox is hidden from address list. When sending a message, Exchange requires that e-mail address is resolved in the
From field.
3. [Issue]
Exchange 2010. A01 grant A0x “Send As” or “Send on Behalf” permission. A0x send as/ send on behalf of A01. The message is only copied to the Sent Items folder in A0x’s mailbox (same as the result of my test). Also cannot configure Exchange 2010 so that the
message is copied to the Sent Items folder of both A01 and A0x.
[Troubleshooting]
This issue occurs because Exchange server 2010 was designed to copy message to the Sent Items folder of the sender only. This issue can be solved by installing Exchange 2010 SP2 UR4. More details in the following KB:
Messages that are sent by using the "Send As" and "Send on behalf" permissions are copied only to the Sent Items folder of the sender in an Exchange Server 2010 environment
http://support.microsoft.com/kb/2632409/en-us
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Nice guide Mavis, I recently explored the same topic. Few things you might want to add is the type of connectivity (Cached vs Online will produce different results) and to expand further on the methods of adding the other mailbox in Outlook (additional mailbox
vs additional account defaults to different methods). Check the screenshot:
And please post this somewhere more visible, like blog/wiki page.

How to Make exchange server 2010 an IMAP server

hi
how do I Make exchange server 2010 an IMAP server?
Any step by step guide?
tnx

Hi,
To configure IMAP for Exchange 2010, you can refer to the above suggestions and try the articles.
Moreover, here is reference about how to configure Exchange account with IMAP mode:
http://support.sherweb.com/Faqs/Show/how-to-configure-a-imap-account-in-outlook-2010-exchange-2010
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Exchange server 2010 DAG configuration

Dear Boss,
I would like to configure Exchange server 2010 with DAG . I have test lab . i would like to tell my test LAB setup .
One domain controller win-2008 X 64 Ent
Two Exchange server 2010 ( Role - Client Access, Mailbox) Each Server Two Network Cards with Different Classes
IP 192.168.44.50 , 51
IP 10.0.0.10 , 20
One Exchange server 2010 ( Role - Hub Transport )
IP 192.168.44.53
Pls tell me how can i create DAG
Note:- i would like to test below steps
1. Exchange server1 may be down or network link down how server 2 to work automatically without any disturbance
2. Exchange server2 may be down or network link down down how server 1 to work automatically without any disturbance
3. Hub transport server maybe down how it can be work ?
Regards
Subash

Hi Suriya,
To create a DAG, simply use the below commands from Exchange Management Shell:
New-DatabaseAvailabilityGroup -Name "DAGNAME" -WitnessServer HUBSERVERNAME
Add-DatabaseAvailabilityGroupServer –Identity DAGNAME -MailboxServer ExchangeServer1
Add-DatabaseAvailabilityGroupServer –Identity DAGNAME -MailboxServer ExchangeServer2
New-MailboxDatabase -Name DB1 -Server
ExchangeServer1
Add-MailboxDatabaseCopy -Identity DB1 -MailboxServer
ExchangeServer2
You can run your tests now, by restarting any of the servers, and you should be able to see the DB1 will automatically failover & failback between the nodes with out any intervention.
for the HUB transport you must have another server to achieve high availability, so you can install the HUB role on a different server or add it to one of your existing servers.
Mohammad Saeed | MCSE 2003 | MCTS: Lync, OCS, Exchange

How to configure canon ir 2250 to send scans to emails via exchange server 2010

Similar Messages

Maybe you are looking for