How to configure Cell Broadcast channels on Z1 compact?

Just got my Z1 compact (wow!) and now I want to enable some (but not all) cell broadcast channels, zo I can receive emergency messages from the dutch governement. They are on channel 919.
Normally I would look on the configuration menu of either the Messages app or on the Settings, Networks menu. Neither shows anything resembling the Cell Broadcast configuration.
I downloaded and installed the Nexus cell broadcasting apk, but I can only enable/disable the US emergency messages.
How do I configure indivdual cell broadcast channels?
Robert

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
There are no specific settings that you can adjust in the phone for cell broadcast.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

How to enable Cell Broadcast message in Iphone5

Hello!!
I work at True Corp. in Thailand. I would like to use Cell Broadcast System by using Iphone5 for receving Cell Broadcast message from Radio Site. I cannot find Cell Broadcast setting in Iphone5, I am not sure I have to new software from Apple or not?
How to enable Cell Broadcast function in Iphone5?
Note: Reference from this Website https://smscellbroadcast.wordpress.com/tag/iphone/
Thank you

In your case, you need to reset the router to factory defaults, at which point the SSID will be set to broadcast and it cannot be disabled. To know more about why there is no option to disable the SSID broadcast anymore on the Cloud firmware, click here.

How to stop cell broadcast 50

I keep getting this Cell broadcast 50 message and I can't find how to stop it. I also find the lack of control options upsetting. Past BlackBerry gave awesome options and user friendly where as my Z10 limits my usage.

Can you not unsubscribe from the broadcast messages?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to configure a port channel with VLAN trunking (and make it work..)

We're trying to configure a port channel group with trunked ports to connect a NetApp HA pair. We want to create two data LIFs and connect them to the switch stack. We are trying to create 2 data lifs, one for cifs and one for nfs that are on different vlans.
We want the same ports to be able to allow multiple vlans to communicate. (trunked)
These data lifs should be able to fail over to different nodes in the HA pair and still be able to communicate on the network.
What this means is that we have to connect 4 ports each for each node in the NetApp HA Pair to the switches and create a port channel of some type that allows for trunked vlans. When we configure the ports, the configuration is as follows (below):
We are only able to configure an IP on one of the vlans.
When we configure an IP from another vlan for the data lif, it does not respond to a ping.
Does anyone have any idea what I'm doing wrong on the Cisco switch?
interface GigabitEthernet4/0/12
description Netapp2-e0a
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
channel-protocol lacp
channel-group 20 mode active
end
interface GigabitEthernet4/0/13
description Netapp2-e0c
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
channel-protocol lacp
channel-group 20 mode active
end
interface GigabitEthernet6/0/12
description Netapp2-e0b
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
channel-protocol lacp
channel-group 20 mode active
end
interface GigabitEthernet6/0/13
description Netapp2-e0d
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
channel-protocol lacp
channel-group 20 mode active
end
interface Port-channel20
description Netapp2-NFS
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
spanning-tree portfast
spanning-tree bpduguard enable
end

Our problem was fixed by the storage people. They changed the server end to trunk, and the encapsulation / etherchannel.
I like all the suggestions, and they probably helped out with the configuration getting this to work.
Thanks!
interface Port-channel20
description Netapp2-NFS
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
switchport mode trunk
interface GigabitEthernet4/0/12
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
switchport mode trunk
channel-protocol lacp
channel-group 20 mode active
interface GigabitEthernet4/0/13
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
switchport mode trunk
channel-protocol lacp
channel-group 20 mode active
interface GigabitEthernet6/0/12
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
switchport mode trunk
channel-protocol lacp
channel-group 20 mode active
interface GigabitEthernet6/0/13
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
switchport mode trunk
channel-protocol lacp
channel-group 20 mode active

How to configure receiver communication channel in File to mail scenario?

Hi all,
I'm working in FIle-to-Mail Scenario. I did all the required configuration In Integration repository. As per my Scenario whenever a text file stored in Application server of the R/3 system. it should be sent as a attchment with a mail.so i set a sender communication channel with file adapter in sender R/3 system . i dont know which business system should i refer for my receiver communication channel.because my receiver end is a mail server. should i create any third party business system for this one?
can anyone suggest me to define a receiver comm channel in a right manner?
helpful answers will be rewarded.

Hi,
Check these
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
Regards
Seshagiri

How to configure two separate channels

Hi all,
I'm working with a two nodes RAC using 9.2.0.8 Enterprise edition.
I want to configure the archivelog backup:
CONFIGURE CHANNEL 1 DEVICE TYPE 'SBT_TAPE' CONNECT 'rman_intranet/oracleto@DBCIAT01' PARMS 'ENV=(TDPO_OPTFILE=/home/adsmadm/rman_DBCIAT01/opt/tdpo.opt)';
CONFIGURE CHANNEL 2 DEVICE TYPE 'SBT_TAPE' CONNECT 'rman_intranet/oracleto@DBCIAT03' PARMS 'ENV=(TDPO_OPTFILE=/home/adsmadm/rman_DBCIAT03/opt/tdpo.opt)';
RMAN> run {
2> sql 'alter system switch logfile';
3> sql 'alter system archive log current';
4> sql 'alter system archive log current';
5> backup format 'brman_arch_%s' archivelog all;
6> }
But fails with this error
channel ORA_DISK_1: sid=27 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 01/14/2013 12:49:55
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file /logs/bbdd/oracle/DBCIAT03/archiver/T0001S0000004618.ARC
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
The error is because can't found the archivelog of second node on the first node.
backup format 'brman_arch_%s'
(archivelog like '/logs/bbdd/oracle/DBCIAT01/archiver/%' channel 1 delete all input )
(archivelog like '/logs/bbdd/oracle/DBCIAT03/archiver/%' channel 2 delete all input )
but fails too with this other error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01005: syntax error: found "integer": expecting one of: "channel_id, double-quoted-string, identifier, single-quoted-string"
RMAN-01007: at line 3 column 66 file: standard input
Please, any idea?
best regards

THis is just an example..
RMAN can allocate channels to instances it is connected to. For a RAC database, you can connect to the grid TNS alias, which points to all instances. You can then set up parallelism for the device type, and the load will be spread across the RAC instances.
You need to make sure that the password file exists for each instance, and that the user you're connecting as from RMAN has sysdba privileges.
Example:
tnsnames.ora entry:
RACDATABASE =
(DESCRIPTION =
(ADDRESS_LIST =
(LOAD_BALANCE = yes)
(FAILOVER = on)
(ADDRESS = (PROTOCOL = TCP)(HOST = racnode1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = racnode2)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = racnode3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
RMAN connect:
rman target username/password@RACDATABASE
(username/password is for a user with SYSDBA privileges).
RMAN channel configuration:
CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 4;
This sets up the channels to be spread across the instances based on instance load.

Cell Broadcast reception on iPhone - is it possible ? How to enable it ?

Hello, all.
I'm working in a company that develops software for mobile operators, such as SMSC, USSDC, Customer care, Billing, etc...
One of our products is Cell Broadcast center.
Our clients use Cell Broadcast to give different services to their subscribers, such as location based discounts. For example, in some areas with low traffic a cell broadcast message is broadcasted - "Discount 20%". The subscribers see such messages on their phone and prefer to call from "cheaper" areas.
The problem is that these messages are not displayed on iPhone.
I've checked through all menues on iPhone and iPhone 3G, and couldn't find anything like "Cell Info Display" \ "Cell Broadcast" (like on Nokia phones), "Channels" (like on windows mobile Samsung), "Info services" (like on Motorola) or anything like this.
At the same time I know that iPhone is able to receive Cell Broadcast messages, since it's able to receive data on sim-card related cell broadcast channels (such as 1000h) and pass it to sim-card.
So my question is - can Iphone be configured to receive ordinary text Cell Broadcast messages (on channels 0-999) and show them on the title screen or in Messages (Mail) menu ???
Maybe there is some "secret code" to enable cell broadcast (like the one used to change SMSC address on iPhone) ???
Best regards,
Yury

I second that! It was a very useful function on my Nokia back then. Now I'm a proud owner of the iPhone 3G and it'd be really great having an opportunity of recieving broadcast messages on Apple's cell-phone as well.

Configure common dist channel and division

hi
how to configure common distribution channel and division
regards
hema

Define Common Distribution Channels
T.Code: VOR1
The master data shared by several distribution channels applies to conditions and customer and material master data.
This helps you minimize the cost of creating and maintaining the master data.
You can also update statistics for each distribution channel and division without creating the master data for the different sub-areas of the organization.
Define Common Divisions
T.code: VOR2
The common master data across various divisions refer to the conditions and the customer master data.
You thus minimize the effort of entering and managing master data.
In addition, you can extrapolate your own statistics per division without having to create master data in the different organizational subareas
regards
AK

ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (ex., 5 min) using the SLA?

I have ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
Or as something else to implement it?
My configuration for SLA monitor:
sla monitor 123
type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
num-packets 3
timeout 3000
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachability

Hey cadet alain,
thank you for your answer :-)
I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
3
Nov 21 2011
18:29:56
77.xxx.xxx.99
59068
80.xxx.xxx.180
80
TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
The attached file is only the show running-config
Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
Regards.
Chris

How to configure Broadcast messaging for IC Webclient profile

Dear all,
How to configure Broadcast messaging for IC Webclient profile. what are the prerequisites for it?
We are not using EP interface for IC Webclient, then where can I find broadcast messaging URL in SAP CRM system.
I have checked for the relevant BSP application, but could not find.
Please help me to configure the scenario successfully, your help will be highly appreciated.
Best regards,
Raghu ram

Hi raghu
In CRM Broad cast messaging application is CRM _BM,
Go to easy access u2013 go to favourites u2013 select add other objects - select BSP Applications- then select CRM_BM Application.
Select that BSP application and test it u2026
`
Regards,
Narsimha

How To Configure XI Receiver Communication Channel ?

Hi Expert,
I have a Scenario wherein i have 2 XI systems & i need to pass the messages between these 2 XI / PI system using XI Adapter. Can any body tell me how to configure the XI Adapter Step by Step. Is it required to Create the SM59 RFC destination with type H. Pl. Explain me in detailed.
Regards
Umesh

Hi Umesh,
In creating XI receover communication channel, you have 2 options for Addressing Type:
1. URL Address - no need to create RFC destination. You just have to specify the XI receiver host name, HTTP port, path (/sap/xi/engine?type=receiver), Authentication data (logon details for SAP Client number of the PI system).
2. HTTP Destination - create RFC destination in SXMB_ADM and specify the RFC destination name in your receiver communication channel.
For SAP documentation, see this link: http://help.sap.com/saphelp_nwpi711/helpdata/en/e1/091640a991c742e10000000a1550b0/frameset.htm
Hope this helps.
Regards,
Jenny

How to Configure internet channel to a relay SMTP server

Hi men,
My problem is How to Configure internet channel(or outbound mail) sending to a relay SMTP server. I want to test my spam software.
I have search and read Sun Messaging Administration document but haven't fought the guide.
./imsimta version
Sun Java(tm) System Messaging Server 7.0-0.04 32bit (built Jun 20 2008)
Thank and Regards,
Duc Tien.

tien86 wrote:
My problem is How to Configure internet channel(or outbound mail) sending to a relay SMTP server. I want to test my spam software. You can use the daemon channel keyword with the tcp_local channel e.g.
! tcp_local
tcp_local smtp nomx multiple remotehost inner switchchannel identnonenumeric \
pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth loopcheck \
daemon relay.yourdomain.com
tcp-daemonIf the relay SMTP server only has an A record then use "nomx" instead of "mx".
http://msg.wikidoc.info/index.php/Mx%2C_nomx%2C_nodns%2C_defaultmx%2C_randommx%2C_nonrandommx%2C_nameservers%2C_defaultnameservers_Channel_Options
The "multiple" keyword instead of "single_sys" helps performance by increasing the number of emails per connection when sending to a relay system.
http://msg.wikidoc.info/index.php/Multiple%2C_addrsperfile%2C_single%2C_single_sys_Channel_Options
Regards,
Shane.

How to configure ether channel

Hi mates,
As far as I know, when you configure ether channel (PAGP/LACP) on two ports, they act like one port. but in reality packets are not sent through both ports. Only one of the ports is used until the actual link fails.
Question is:
I have two switches, each has two SFP ports, I want to connect two switches each other.
how can I make ether channel always use both ports when sending/transmitting packets? I remember it is possible.
thanks for helping :)

HI
i hope this link will help u .
http://www.cisco.com/en/US/products/hw/switches/ps663/products_configuration_example09186a0080094aec.shtml
when u create ether-channel it will automatically load balance based on source/destiantion mac address or source/destiantion ip address.
Thanks
Mahmood

How to configure channels with Spring-Flex?

Newbie here trying to get my first Flex/BlazeDS app up and running.   I'm using the Spring-Flex integration and believe I have properly configured my servet and remoting destinations. My only remaining questions relate to how to configure the channels.
The use of the Spring/BlazeDS integration means that I do not have to have a remoting-config.xml file anymore. But it the documentation is unclear as to whether I need to configure my channels within a services-config.xml file still.
If I do need a services-config.xml file (and I think I do), how does one get away without hard coding the server URL? I've seen samples on the web like:
url="https://\{server.name\}:\{server.port\}/flex2gateway/cfamfsecure"
But I don't get when/where/what does the dynamic substituion? They almost look like Maven or Spring properties, but they can't be. Is this just something that has to be manually changed after installation?
Finally, I really don't like the idea of compiling the Flex client against a server-side configuration file as I have seen suggested on the web. How would one go about have the Flex client discover - or otherwise figure out what it needs to do dynamically?
Sorry for the multi-question post....thanks for any help!

You could load that info from an XML file as described below. I took this from the doc.
To further externalize configuration, you can pass the endpoint URL value to the client at runtime. One way to do this is by reading a configuration file with an HTTPService component at application startup. The configuration file includes the information to programmatically create a channel set at runtime. You can use E4X syntax to get information from the configuration file.
The following MXML application shows this configuration file technique:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
    applicationComplete="configSrv.send()">
    <mx:Script>
    <![CDATA[
    import mx.controls.Alert;
    import mx.messaging.channels.AMFChannel;
    import mx.messaging.ChannelSet;
    import mx.rpc.events.ResultEvent;
    private var channelSet:ChannelSet;
    private function configResultHandler(event:ResultEvent):void
        var xml:XML = event.result as XML;
        var amfEndpoint:String = "" + xml..channel.(@id=="amf").@endpoint;
        if (amfEndpoint == "")
            Alert.show("amf channel not configured", "Error");
        else
            channelSet = new ChannelSet();
            var channel:AMFChannel = new AMFChannel("my-amf", amfEndpoint);
            channelSet.addChannel(channel);
            ro.channelSet = channelSet;
            ro.getProducts();
    ]]>
    </mx:Script>
    <mx:HTTPService id="configSrv" url="config.xml" resultFormat="e4x" result="configResultHandler(event)"/>
    <mx:RemoteObject id="ro" destination="product"/>
    <mx:DataGrid dataProvider="{ro.getProducts.lastResult}" width="100%" height="100%"/>
</mx:Application>
The MXML application reads the following configuration file:
<?xml version="1.0" encoding="utf-8"?>
<config>
    <channels>
        <channel id="amf" endpoint="http://localhost:8400/lcds-samples/messagebroker/amf"/>
    </channels>
</config>

How to configure broadcast ip permanently

hi
I have facing problem regarding configuration of broadcast IP
to resolve this ether i have to use ifconfig command for every restart or manually enter ip,netmask & broadcast ip in \etc\hostname.hme0 file in this case my default gateway will also change then i have to use route add command to solve it, again route add also for current session only
my configuration
/etc/inet/hosts 10.205.42.2
/etc/inet/ipnodes 10.205.42.2
/etc/inet/netmasks 255.255.255.0
/etc/inet/defaultrouter 10.205.42.1
In this configuration output is
IP 10.205.42.2 netmask 255.255.255.0 broadcast 10.205.42.255 default gateway 10.205.42.1
Hear i want broadcast IP 10.255.255.255
When i change /etc/hostname.hme0 with
10.205.42.2 newmask 255.255.255.0 broadcast 10.255.255.255
In this case my output is
IP 10.205.42.2 netmask 255.255.255.0 broadcast 10.255.255.255 default gateway 127.0.0.1
Hear i want default gateway 10.205.42.1
plz help to configar this output permanently
IP 10.205.42.2 netmask 255.255.255.0 broadcast 10.255.255.255 default gateway 10.205.42.1

Actually in my organisation vlan is configured with 10.205.XX.XXX 255.255.255.0 if i use 10.205.42.255 broadcast ip, i only communicate with 10.205.42.xxx network. i need to communicate with 10.205.xx.xxx network.

How to configure Cell Broadcast channels on Z1 compact?

Similar Messages

Maybe you are looking for