How to Configure Compact 7 as DHCP Server

HI All,
I have a Windows Embedded Compact 7 headless device.
I want o run DHCP Server on this device to connect 10 clients to it over wired Ethernet.
Later I need to communicate with all 10 clients periodically by using ip allocated by DHCP server.
The DHCP clients we need to use will have only Dynamic IP configuration, no provision to set static IP.
So we need to make WEC7 device as DHCP Server.
Is it really possible to use WEC7 device as DHCP server?
If Yes, how can I Configure WEC7 as DHCP server?
If No, Please suggest any other alternatives to assign IP's to clients and start communicating with clients.
Thanks in advance.
rakesh

Hi All,
DHCP Allocator is working fine on WEC7.
I am able to see the connected DHCP clients information in Registry under ConnectionSharing/Addresses.
But for my application development I don't want to read the registry all the time to get updates of connected clients.
Are there any other options (API) available to read connected clients info (IP, MAC, Client Name etc).
And if i can register to some services for client connection status change notifications would be better.
Do you suggest any appropriate ways?
Thanks in Advance.
rakesh

Similar Messages

SG 300-28: how to configure it as DHCP server.

I am relatively new the configuring network switches. Could someone point me in right direction to configure SG300-28 as a DHCP server?
From the people I talked based on device specs it should be able to act as dhcp server. However, if we cannot, can it be configured so that clients get DHCP infomation from Firewall to which L3 switch is connected.
Thank you,
S.

Hi Sreenath,
I guess when you try the GUI or CLI interface, you would have noticed there is no mention of DHCP server.
They both mention, as does the datahseet, DHCP relay;
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps10898/data_sheet_c78-610061.html
Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2
Relay of DHCP traffic to DHCP server in different VLAN. Works with DHCP Option 82
The new SG300-28 switch or ordering p/n SRW2024-K9, does not incorporate a DHCP server, but relies on DHCP relay to get IP addresses allocated to PC's on seperate VLANs.
If you needed a DHCP server within a Layer 3 switch you would have to look at the traditional Catalyst 3XXX series switch for that functionality.
I guess this is not the answer you wanted to hear.
regards Dave

How to configure Https in Project server 2010.

HI,
Can i any one help me,
How to configure Https in Project server 2010.
My server farm is 1.Test1(App & Wfe) 2. Test2(App & Wfe)
Both are load balanced wit NLB as abc.hyd.in
DO i need to Install certificate in two servers Test1 & Test2 or one server is enough ?
Can any one please provide me a link to configure Https for project server 2010 for Two Farms Servers.
Thank You, Kumar KSV

There is no special configuration for Project Server to have the IIS enabled, it follows the typical sharepoint SSL enablement, we might need some mor edetails on how your NLB is done is it hardware based, software based ? it all depends how you want
to architecht the system, you can enable the Https either on NLB or WFE, again depending upon how you want to enable it, you will need to install the certificates on both WFE or on NLB
Follow the blog below to configure the SSL:
http://epmxperts.wordpress.com/2011/03/05/extend-same-project-web-app-instance-for-different-protocol-authentication-mechanism/
http://blogs.msdn.com/b/sowmyancs/archive/2010/02/12/how-to-enable-ssl-on-a-sharepoint-web-application.aspx
http://www.sharepointconfig.com/2010/03/configuring-a-sharepoint-website-to-allow-ssl-connections/
Thanks | epmXperts | http://epmxperts.wordpress.com

How to configure LDAP in BPEL Server

Hi,
How to configure LDAP in BPEL Server?
Also, what if we want to bounce to a YAHOO or GMAIL type email?
Basically, can we do dynamic email and phone notifications from BPEL?
Is there any documentation which tell us how to do this?
I appreciate any pointer in this regard.
Thanks in Advance.
Levey.

Levey,
You can do the dynamic email and phone notifications with the help of xpath expressions. Basically there are api to get the these attributes based on the ID on the identity server.
--Shiv

How get the RVS4000's DHCP server to assign another IP address other than its own as the default gateway to its DHCP clients?

Hi,
I have a RVS4000 router with DHCP enabled and in router mode.
The LAN is 192.168.2.x. The RVS4000 static IP address is 192.168.2.8
The router is not the RVS4000 and is at 192.168.2.1
The RVS4000 dhcp is assigning it's clients a default gateway of 192.168.2.8 instead of what I want 192.168.2.1.
How can I get the RVS4000's DHCP server to assign another IP address other than its own as the default gateway to its DHCP clients?
Thanks

Hi Gail, you cannot do this. The router, as the DHCP server will only assign a default gateway of what IP interface the DHCP server runs on. If you have the default IP, the gateway is 192.168.1.1. If you create a second vlan, by default it would be 192.168.2.1.
There are not configuration options for the built-in DHCP server. If you'd like to expand this functionality, you would need an external dhcp server.
-Tom
Please mark answered for helpful posts

How to configure external FTP backup server CISCO NCS 1.1

How do you configure a external FTP Server for Cisco NCS 1.1? I only get setup username/password, i also need to setup FTP server IP and directory.

from the CLI you setup a repository,
conf t
repository FTP
url ftp://
username < username> password
exit
http://www.cisco.com/en/US/docs/wireless/ncs/1.0/command/reference/cli_app_a.html#wp1013913
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

How to Configure MS Office Comminication Server 2007 with WebCenter Spaces?

Hello All,
Has anyone successfully configured MS Office Comminication Server(OCS 2007) with WebCenter 11g Spaces?
I have installed the RTCServices on the MS OCS server, and wll the services and wsdls are accessible. The IM is working with MS Communicator and also Communicator Web Access (CWA). The Webcenter administrator guide does not have any configuration information about how to use the RTCServices (extracted from Oracle's owc_lcs.zip, part of the Oracle Fusion Middleware Companion 11g).
In the EM's webcenter control -->Settings -->Service Configuration, I tried to create a new IM service and an External Application but not sure what the URL to use.
If anyone have a successful OCS 2007 integration, could you please share your configuration steps?
Thanks,
Johnny
Edited by: user459212 on Feb 10, 2010 12:30 PM
Edited by: user459212 on Feb 10, 2010 12:31 PM

Hi,
I am also facing the same issue, not sure about what url to use. And also the login webservice doesn't work while I am testing using http://localhost:81/RTC/RTCService.asmx. It always throwing the following error
" Unable to cast COM object of type 'RTCLib.RTCClientClass' to interface type 'RTCLib.IRTCClient'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{07829E45-9A34-408E-A011-BDDF13487CD1}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE))."
Is the current owc_lcs.zip support MS Office Communication Server 2007?
Please share the configuration step if anyone already integrated OCS 2007.
Thanks,
-Mukesh.
Edited by: user9127933 on Feb 19, 2010 4:05 AM

How to configure a forms 6i server

Hi
I am trying to configure an oracle 6i server for a college project and need some help. I have the documentation but its very confusing and not beginner orientated!
I am using windows XP. The forms server 6i,Apache and Jinitiator are installed in the following folders all on the same machine:
C:\Program Files\Apache Software Foundation\Apache2.2
C:\orant\FORMS60\server
C:\orant\jinit
How do i configure the Forms Server? I am connecting to a database over a network and the forms i am using are in the folder:
C:\orant\FORMS60\server
What environment variables should i change and to what?
What modifications should i make to the configuration files generated by th oracle installer i.e formsweb.cfg,base.htm and basejini.htm
As you can see i really need your help. Any advice would be greatly appreciated.
Thanks,
Jackie
Message was edited by:
[email protected]

Ive looked over the base.htm file and formsweb.cfg file and they appear to be fine but i may be missing something,.maybe you can see something i cant in these files:
On opening the base.htm file nothing happens even when i directly
specify the mainmenu form
the base file contains:
<HTML>












<HEAD><TITLE>%pageTitle%</TITLE></HEAD>
<BODY %HTMLbodyAttrs%>
%HTMLbeforeForm%
<OBJECT classid="CAFECAFE-0013-0001-0006-ABCDEFABCDEF"
WIDTH=600
HEIGHT=480
codebase="http://acme.com/jinit1316.exe#Version=1.3.1.6">
<PARAM NAME="CODE" VALUE="oracle.forms.engine.Main" >
<PARAM NAME="CODEBASE" VALUE="/forms60code/" >
<PARAM NAME="ARCHIVE" VALUE="/forms60code/f60all.jar" >
<PARAM NAME="type"
VALUE="application/x-jinit-applet;version=1.3.1.6">
<PARAM NAME="serverPort" VALUE="9000">
<PARAM NAME="serverArgs" VALUE="module=order.fmx">
<PARAM NAME="serverApp" VALUE="default">
</OBJECT>
%HTMLafterForm%
</BODY>
</HTML>
The formsweb.cfg file contains:
;; Forms Web CGI Configuration File
; This file defines parameter values used by the Forms Web CGI
; PARAMETER VALUES USED BY DEFAULT
; SYSTEM PARAMETERS
; These have fixed names and give information required by the Forms
; Web CGI in order to function. They cannot be specified in the URL
query
; string. But they can be overriden in a named configuration (see
below).
baseHTML=c:\orant\FORMS60\server\base.htm
baseHTMLJInitiator=c:\orant\FORMS60\server\basejini.htm
HTMLdelimiter=%
MetricsServerPort=9020
;MetricsServerErrorURL
; The next parameter specifies how to execute the Forms applet under
; Microsoft Internet Explorer 5.0. Put IE50=native if you want the
; Forms applet to run in the browser's native JVM.
IE50=JInitator
;IE50=native
; USER PARAMETERS
; These match variables (e.g. %form%) in the baseHTML file. Their
values
; may be overridden by specifying them in the URL query string
; (e.g.
"http://myhost.mydomain.com/ifcgi60.exe?form=myform&width=700")
; or by overriding them in a specific, named configuration (see below)
; 1) Runform arguments:
form=C:\orant\FORMS60\server\MAINMENU.fmx
userid=student19/s19@orcl
;otherparams
; 2) HTML page title, attributes for the BODY tag, and HTML to add
before and
; after the form:
pageTitle=Oracle Forms Server
;HTMLbodyAttrs
;HTMLbeforeForm
;HTMLafterForm
; 3) Values for the Forms applet parameters:
width=6500
height=5000
separateFrame=false
splashScreen=yes
; select default background by not specifying a value
;background
lookAndFeel=Oracle
colorScheme=teal
serverApp=default
serverPort=9000
serverHost=localhost
connectMode=HTTP
archive=f60web.jar
archive_jini=f60all_jinit.jar
archive_ie=f60all.cab
; 4) Parameters for JInitiator
; Page displayed to Netscape users to allow them to download
JInitiator.
; If you create your own version, set this parameter to point to it.
jinit_download_page=/jinitiator/us/jinit_download.htm
; Parameters related to the version of JInitiator.
jinit_classid=clsid:CAFECAFE-0013-0001-0006-ABCDEFABCDEF
jinit_exename=jinit.exe#Version=1,3,1,6
jinit_mimetype=application/x-jinit-applet;version=1.3.1.6
; SPECIFIC CONFIGURATIONS
; You may define your own specific, named configurations (sets of
parameters)
; by adding special sections as illustrated in the following examples.
; Note that you need only specify the parameters you want to change.
The
; default values (defined above) will be used for all other parameters.
; Use of a specific configuration can be requested by including the
text
; "config=<your_config_name>" in the query string of the URL used to
run
; a form. For example, to use the sepwin configuration, your could
issue
; a URL like "http://myhost.mydomain.com/ifcgi60.exe?config=sepwin".
; Example 1: configuration to run forms in a separate browser window
with
; "generic" look and feel (include "config=sepwin" in the
URL)
;[sepwin]
;separateFrame=True
;lookandfeel=Generic
; Example 2: configuration affecting users of MicroSoft Internet
Explorer 5.0.
; Forms applet will run under the browser's native JVM rather
than
; using Oracle JInitiator.
;[ie50native]
;IE50=JInitiator
; Example 3: configuration forcing use of the base.htm base HTML file in
all
; cases (means applet-style tags will always be generated and
; JInitiator will never be used).
;[applet]
;baseHTMLJInitiator=%FORMS60%\server\basejini.htm

How to configure AD and Token server (over radius) authentication

Dear forum,
I have a scenario where users should be allowed network access after their have given their AD credentials and a token (Blackshield Token server).
The token server speaks over radius to the cisco ACS appliance. I have managed to get users authenticated by means of their AD credentials. I am how ever not able to use both means in order to have a successfull authentication.
Does anyone have a configuration example for this scenario? Any help would be greatly appreciated.
Thanks!!!

Hi,
I have had two deployments using this form of authentication.
Just so we are on the same page, the token servers that I have integrated connect to an Active Directory server running NPS (MS radius), then the user will have to send their password+token and the token software will check the account password, and then the token to see if the users succeeds.
Let me know if that is the design of your software. If it is, then all you need to do is configure the token software to run on radius and then set the policies up from there. From the network device standpoint it just needs to point to the radius server.
Thanks,
Tarik Admani
*Please rate helpful posts*

How to configure weblogic 8.1 server for connecting to Oracle8.1.7

Hi all,
I m am A.Rama Krishna. I want an information regarding the connection to
Oracle8.1.7 from weblogic8.1 Application server. I did every thing that I can
do as mentioned in Documentation. But the datasource object is not available in
JNDI tree. And also one more thing, after creating the connection pool with some
name, I have to select the server to which I have to bind it by clicking "Target
& Deploy" option. All the active servers in my domain are displayed there with
a check box beside it asking me to choose all those severs to which I have to
bind the connection pool. Once I check the server and click "Apply" button, a
message like "Error on the page" dispalys on the bottom status bar. How to fix
this problem. Please advice me some thng. I created all the connectionpool and
Data source objects during the creating the server in the new domain with the
help of Wizard.
Thanx in advance
Regards
Ram

Rama,
If you have created and deployed a connection pool and data source via the
WebLogic Server console, you should be able to access it from the Workshop
IDE.
If you configured the connection pool and datasource during configuration
time, can you login to the console and check if they have been created and
deployed successfully ?
Can you also provide more information on what your are trying to ? Are you
trying to create a db control which use this datasource ?
Thanks
Raj Alagumalai
Backline Workshop Support
"A.Rama Krishna" <[email protected]> wrote in message
news:[email protected]..
>
Hi all,
I m am A.Rama Krishna. I want an information regarding the connectionto
Oracle8.1.7 from weblogic8.1 Application server. I did every thing that Ican
do as mentioned in Documentation. But the datasource object is notavailable in
JNDI tree. And also one more thing, after creating the connection poolwith some
name, I have to select the server to which I have to bind it by clicking"Target
& Deploy" option. All the active servers in my domain are displayed therewith
a check box beside it asking me to choose all those severs to which I haveto
bind the connection pool. Once I check the server and click "Apply"button, a
message like "Error on the page" dispalys on the bottom status bar. How tofix
this problem. Please advice me some thng. I created all the connectionpooland
Data source objects during the creating the server in the new domain withthe
help of Wizard.
Thanx in advance
Regards
Ram

How to configure ftpadapter JNDI in server Console for oracle soa suite 11g

Hi All,
I need to configure a ftp adapter in one of my bpel process. Could any one guide me pleas ,how to do FTP adapter jndi configure in admin server console?
Thank you.
Regards,
Satish

http://www.oracle.com/technology/architect/soa-suite-series/dynamic_endpoints.html
Configuring the End Point Properties for an Adapter through Oracle Enterprise Manager
does that help ?

How to configure the wiki/blog server to share the embed LDAP

All
anyone know the steps to share the embed LDAP to the wiki/blog server? the SSO steps of course meet the requirement, but all i haveto do is to setup the ENV to work with the demo custom apps for avoiding login twice. any input are appreciated.

And i assumed wrong :)
You are not using the latest version of WebCenter. According to what i see, you are using webcenter 11.1.1.3 or earlier which does not use UCM as wiki and blog service.
So basicly all the links i provided in my previous post are useless for you.
To be honnest, configuring wiki and blog in pre PS3 environment is a real pain in the "you know what i mean".
The reason for this is that you will need to create a few keystores, configure SSO,... The instruction that explains how is very long and difficult and in the end, you end up with integrating iframes which is not nice...
That's why since PS3, webcenter uses UCM to store the wiki and blog services.
If it's for a demo application, why not use the latest version?
Edited by: Yannick Ongena on Aug 25, 2011 7:52 AM

How to configure oracle 6i report server run time component with application server

we got oracle 6i report server for developing the web based reports for our undergoing product. we r succesed in developing the web based reports using oracle 6i report server.But we r facing problems while deploying the product with oracle reports at clients place,why because the client does not have the oracle 6i report server. To solve this problem we have to configure the oracle 6i report server run time component with application server at client side , but we are unable to configure this component(that is CGI handler).

You can run multiple instances of Reports Server in 6i.
In tnsnames.ora, for each server, have a different name and each listening to different port.
For example,
server1.world = (ADDRESS = (PROTOCOL = TCP)(Host = myhost.mydomain.com)(Port = 1949))
server2.world = (ADDRESS = (PROTOCOL = TCP)(Host = myhost.mydomain.com)(Port = 1950))
Also, if you want to know about Reports Server Clustering, you may refer to "Publishing Reports" document on OTN:
http://otn.oracle.com/docs/products/reports/pdf/A73173_01.pdf

How to configure the crystalreports job server

hi everyone,
we are having crystal reports itself in our cmc .
i am having a scenario where the reports are stored in cmc i am showing you the folder hierarchy how the reports r stored in cmc( daily/eod/ak or fl or az), i am having the specific crystal reports for that particular state in that folder. i want to schedule these crystal reports fro every day. i select file-system as destination for these crystal reports. my scenario is these reports need to be stored on the server(i mean the location of the file-system) under different directories like
/abcd/xyz/crystalreports/daily/eod/ak or
/abcd/xyz/crystalreports/daily/eod/az.
but i am unable to do that, i can see just to point all the crystal reports to one location i.e /abcd/xyz/crystalreports
i did changes to my crystal reports job server by adding file-system to the destination and specified the path were i want to store the reports but i cannot see how to store these crystal reports for different states in different directories on the server(i mean abcd/xyz/crystalreports/daily/eod/az)
we r having boe xi 3.1 sp3 on solaris
we want to schedule crystal reports thats the reason i asked for crystalreports job server
Edited by: richa123 on Jan 13, 2011 7:41 PM
Edited by: richa123 on Jan 13, 2011 7:44 PM

Hi,
If you are talking unmanaged reports (network location) then yes you can do this but if you are talking managed reports (reports stay in CMC) then you can not specify the folder path for the successful instance. The destination will be default enterprise and it will be same folder where the parent report resides, to keep the relationship intact.
I hope this helps.
Thanks,
Muhammad

How to configure my JMS QUEUE serve only one message at a time?

Hi All,
I have requirement where I need to develope a JMS QUEUE in weblogic. This MDB has to serve only one message at a time. Is there any way to configure via annotations or in weblogic server settings ?
Any help would be really appreciated...
Thank you,
K.

I'm not aware of any way to configure the max pool size via annotations, you might try posting to the EJB newsgroup (please post back the answer). Of course you can set the size via an EJB descriptor, as per the MDB chapter of the Performance and Tuning guide in the edocs.
By the way, if you have ordered message processing requirements, I highly recommend taking a look at the WebLogic JMS "Unit-of-Order" (UOO) feature as per the UOO chapter of the JMS programmer's guide. For a variety of reasons, the UOO features is often, by far, the best option for handling such requirements. If this feature applies to your use case, then there would be no need to force single threaded message processing in some sort of manual fashion (the feature enforces this for you).
Tom

How to Configure Compact 7 as DHCP Server

Similar Messages

Maybe you are looking for