How to configure css with two redudant L2 switches

Question:
if i have one CSS to connect to a redundant datacenter(two routers and two core switches), how do i configure it so that the css provides service to both networks ?
regards
PT

I believe this is a simple spantree issue, if both ports on your content switch are bridged to the same vlan, then spantree will decide which port to use.
You won't be able switch content on both l2 switcches at the same time.
Jonathan Nantel

Similar Messages

How to configure sso with SSL step by step

Purpose
In this document, you can learn how to configure SSO with SSL. After user have certificate installed in browser, he can login without input username and password.
Overview
In this document we will demonstrate:
1.     How to configure OHS support SSL
2.     How to Register SSO with SSL
3.     Configure SSO for certificates
Prerequisites
Before start this document, you should have:
1.     Oracle AS 10g infrastructure installed (10.1.2)
2.     OCA installed
Note:
1.     “When you install Oracle infrastructure, please make sure you have select OCA.
2.     How Certificate-Enabled Authentication Works:
a.     The user tries to access a partner application.
b.     The partner application redirects the user to the single sign-on server for authentication. As part of this redirection, the browser sends the user's certificate to the login URL of the server (2a). If it is able to verify the certificate, the server returns the user to the requested application.
c.     The application delivers content. Users whose browsers are configured to prompt for a certificate-store password may only have to present this password once, depending upon how their browser is configured. If they log out and then attempt to access a partner application, the browser passes their certificate to the single sign-on server automatically. This means that they never really log out. To effectively log out, they must close the browser.
Enable SSL on the Single Sign-On Middle Tier
The following steps involve configuring the Oracle HTTP Server. Perform them on the single sign-on middle tier. In doing so, keep the following in mind:
l     You must configure SSL on the computer where the single sign-on middle tier is running.
l     You are configuring one-way SSL.
l     You may enable SSL for simple network encryption; PKI authentication is not required. Note though that you must use a valid wallet and server certificate. The default wallet location is ORACLE_HOME/Apache/Apache/conf/ssl.wlt/default.
1.     Back up the opmn.xml file, found at ORACLE_HOME/opmn/conf
2.     In opmn.xml, change the value for the start-mode parameter to ssl-enabled. This parameter appears in boldface in the xml tag immediately following.
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
</category>
</module-data>
<process-set id="HTTP_Server" numprocs="1"/>
</process-type>
</ias-component>
3.     Update the distributed cluster management database with the change: ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct opmn
4.     Reload the modified opmn configuration file:
ORACLE_HOME/opmn/bin/opmnctl reload
5.     Keep a non-SSL port active. The External Applications portlet communicates with the single sign-on server over a non-SSL port. The HTTP port is enabled by default. If you have not disabled the port, this step requires no action.
6.     Apply the rule mod_rewrite to SSL configuration. This step involves modifying the ssl.conf file on the middle-tier computer. The file is at ORACLE_HOME/Apache/Apache/conf. Back up the file before editing it.
Because the Oracle HTTP Server has to be available over both HTTP and HTTPS, the SSL host must be configured as a virtual host. Add the lines that follow to the SSL Virtual Hosts section of ssl.conf if they are not already there. These lines ensure that the single sign-on login module in OC4J_SECURITY is invoked when a user logs in to the SSL host.
<VirtualHost ssl_host:port>
RewriteEngine on
RewriteOptions inherit
</VirtualHost>
Save and close the file.
7.     Update the distributed cluster management database with the changes:
ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct ohs
8.     Restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl stopproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl startproc process-type=HTTP_Server
9.     Verify that you have enabled the single sign-on middle tier for SSL by trying to access the OracleAS welcome page, using the format https://host:ssl_port.
Reconfigure the Identity Management Infrastructure Database
Change all references of http in single sign-on URLs to https within the identity management infrastructure database. When you change single sign-on URLs in the database, you must also change these URLs in the targets.xml file on the single sign-on middle tier. targets.xml is the configuration file for the various "targets" that Oracle Enterprise Manager monitors. One of these targets is OracleAS Single Sign-On.
1.     Change Single Sign-On URLs
Run the ssocfg script, taking care to enter the command on the computer where the single sign-on middle tier is located. Use the following syntax:
UNIX:
$ORACLE_HOME/sso/bin/ssocfg.sh protocol host ssl_port
Windows:
%ORACLE_HOME%\sso\bin\ssocfg.bat protocol host ssl_port
In this case, protocol is https. (To change back to HTTP, use http.) The parameter host is the host name, or server name, of the Oracle HTTP listener for the single sign-on server.
Here is an example:
ssocfg.sh https login.acme.com 4443
2. Restart OC4J_SECURITY instance and verify the configuration
To determine the correct port number, examine the ssl.conf file. Port 4443 is the port number that the OracleAS installer assigns during installation.
If you run ssocfg successfully, the script returns a status 0. To confirm that you were successful, restart the OC4J_SECURITY instance:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Then try logging in to the single sign-on server at its SSL address:
https://host:ssl_port/pls/orasso/
     3. Back up the file targets.xml:
cp ORACLE_HOME/sysman/emd/targets.xml ORACLE_HOME/sysman/emd/targets.xml.backup
4. Open the file and find the target type oracle_sso_server. Within this target type, locate and edit the three attributes that you passed to ssocfg:
·     HTTPMachine—the server host name
·     HTTPPort—the server port number
·     HTTPProtocol—the server protocol
If, for example, you run ssocfg like this:
ORACLE_HOME/sso/bin/ssocfg.sh http sso.mydomain.com:4443
Update the three attributes this way:
<Property NAME="HTTPMachine" VALUE="sso.mydomain.com"/>
<Property NAME="HTTPPort" VALUE="4443"/>
<Property NAME="HTTPProtocol" VALUE="HTTPS"/>
5.Save and close the file.
6.     Reload the OracleAS console:
     ORACLE_HOME/bin/emctl reload
7. Issue these two commands:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Registering mod_osso
1.     This command sequence that follows shows a mod_osso instance being reregistered with the single sign-on server.
$ORACLE_HOME/sso/bin/ssoreg.sh
     -oracle_home_path $ORACLE_HOME
     -config_mod_osso TRUE
     -mod_osso_url https://myhost.mydomain.com:4443
2.     Restarting the Oracle HTTP Server
After running ssoreg, restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
Configuring the Single Sign-On System for Certificates
1.     Configure policy.properties with the Default Authentication Plugin
Update the DefaultAuthLevel section of the policy.properties file with the correct authentication level for certificate sign-on. This file is at ORACLE_HOME/sso/conf. Set the default authentication level to this value:
DefaultAuthLevel = MediumHighSecurity
Then, in the Authentication plugins section, pair this authentication level with the default authentication plugin:
MediumHighSecurity_AuthPlugin = oracle.security.sso.server.auth.SSOX509CertAuth
2.     Restart the Single Sign-On Middle Tier
After configuring the server, restart the middle tier:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Bringing the SSO Users to OCA User Certificate Request URL
The OCA server reduces the administrative and maintenance cost of provisioning a user certificate. The OCA server achieves this by authenticating users by using OracleAS SSO server authentication. All users who have an Oracle AS SSO server account can directly get a certificate by using the OCA user interface. This reduces the time normoally requidred to provision a certificate by a certificate authority.
The URL for the SSO certificate Request is:
https://<Oracle_HTTP_host>:<oca_ssl_port>/oca/sso_oca_link
You can configure OCA to provide the user certificate request interface URL to SSO server for display whenever SSO is not using a sertificate to authenticate a user. After the OracleAS SSO server authenticates a user, it then display the OCA screen enabling that user to request a certificate.
To link the OCA server to OracleAS SSO server, use the following command:
ocactl linksso
opmnctl stoproc type=oc4j instancename=oca
opmnctl startproc type=oc4j instancename=oca
You also can use ocactl unlinksso to unlink the OCA to SSO.

I have read the SSO admin guide, and performed the steps for enabling SSL on the SSO, and followed the steps to configure mod_osso with virtual host on port 4443 as mentioned in the admin guide.
The case now is that when I call my form (which is developed by forms developer suite 10g and deployed on the forms server which is SSO enabled) , it calls the SSO module on port 7777 using http (the default behaviour).
on a URL that looks like this :
http://myhostname:7777/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
and gives the error :
( Forbidden
You don't have permisission to access /sso/auth on this server at port 7777)
when I manually change the URL to :
https://myhostname:4443/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
the SSO works correctly.
The question is :
How can I change this default behaviour and make it call SSO on port 4443 using https instead ?
Any ideas ?
Thanks in advance

How to configure connectivity between two vm linux hosts

Hello All,
i have installed vm workstation with two RHEL4 linux installation.
Node 1:RHEL4
Node 2:RHEL4
i have configured 2 ethernet cards am able to ping in a host but not each other.
i have tried to ping from Node 1 to Node 2 am getting icmp_seq=0 Destination Host Unreachable .....
kindly suggest how to configure connectivity between two host permanently.please explain with example if possible. or suggest any link.
thanks,
Mike.

1003614 wrote:
thanks for quick reply ....Oracle vm workstation 4.2 am using.
... then your post is now moved to the appropriate forum space for your question (Oracle VM for x86).

Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff

Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff

It is not possible to do that.
Allan

I just got a fc7 yamaha expression pedal and can't figure out how to configure it with mainstage or logic.

I just got a fc7 yamaha expression pedal and can't figure out how to configure it with mainstage or logic. I'm using a Gio pedal.

Hi
You will need to map the "Expression Pedal" to the Waa pedal. There are several ways you could do it, here's one:
In Layout Mode, add a Pedal Screen control, and Assign it to the in-coming MIDI from the GiO.
In Edit mode, select the Screen Control, and click the "Map Parameter" button. While this is active click on the Wah pedal in the PedalBoard plugin. Turn off 'Map Parameter".
CCT

I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?

I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?

Up the top where the three buttons are (red yellow green) are three images. Click on the third image that looks like a notepad (not the first which is a library book), and that should get rid of 'Notes'. To read using two pages make the window bigger.

How to configure WebLogic with WebCenter¿?

Hi,
I have created 2 machines:
- WebCenter in Oracle Linux with a database.
- WebLogic Server in Oracle Linux too.
From WebLogic Server I have to connect with WebCenter database, and I am not sure how to do it.
I have tried to do it with:
<WL_HOME>/common/bin/config.sh
And I selected to create a new domain or create from an existing template (wls.jar), but with two options the wizard doesn't show me the JDBC configurations options.
So, from WebLogic Server Admin Web in the Domain Structure there is JDBC, from here I think I can do it.
But here is my doubt, if I want to work with JD Edwards EnterpriseOne too, the JDBC should be the JDE's database or webcenter's database¿?
NOTE:
with config.sh, after select the option "Create a new WebLogic domain" I need to select Domain Source, in the "Generate a domain configured automatically to support the following products", I only can select this:
- WebLogic Advanced Web Services Extensions
- Basic WebLogic Server is checked.
But I haven't other options as:
- Oracle WebCenter Spaces
- Oracle EnterpriseManager
- Oracle Portlet Producer
etc
Why I can see these options? Because I think that the new domain should be configurated to interact with WebCenter elements.
Thanks and regards,
Mónica.

Hi,
The configuration wizard (config.sh) lets you create a WebLogic Domain, however and depending on others "Oracle Middleware" products installed on the same "Oracle Home" (directory where weblogic has been installed) the configuration wizard allows you create the new weblogic domain to support the others middleware products such as WebCenter.
When I say support It means that Configuration Wizard allows you to create the weblogic resources like JDBC connections, JMS services, and deploys all applications that integrates another product such as WebCenter.
I suggest create your domain with support for WebCenter and then from Admin Console create the JDBC resource to connect to other database such as JD Edwards database.
I hope this help.

Cabling & configuring D1000 with two 420R with two dual channel controller

Hi all,
I have a problem for configure a D1000 storage with two Sun Enterprise 420R with on board two dual channel scsi controller for each one.
The D1000 have 4 disks installed, the disks are positioned in the slots 2,3,7,8 and the option swith on rear of D1000 are configured :
5 4 3 2 1
DOWN DOWN DOWN DOWN UP
The Module ID switch are positioned at 0 (I have only one D1000) and the leds of the disks on the D1000 are on.
I have a problem to view all disks from both Sun.
How to I do the cabling the D1000 with the two Sun ? I drew a diagram of my environment to understand how to connect correctly the connectors behind the D1000 and behind the Sun.
http://img152.imageshack.us/img152/4097/schemascsid1000.jpg
Can anyone help me? Any help is appreciated.

are you using HVD scsi controllers? Gotsta doo that with D1000...
if you just want to have each 420R use two drives, then scsi cables on each side and differential terminators in the middle.
if you want to share the drives, you will have to do your homework.
good luck,
haroldkarl

How to enter invoice with two different tax codes in one line?

Dear friends,
I have this PO for which I enter the invoice.
I recieve later a subsequent debit for this PO from the transporter. This subsequent invoice has got extra debits, one with 21% VAT and one with 19% VAT, which means two items with two different tax codes.
I want to enter this subsequent debit for each item of the PO, and I want to enter both debits in every item of the PO.
How can I enter in one row in MIRO a debit with two different tax codes.
Thank you.

I want in the same line item to enter two tax codes.
Do you Know if there is any way to do this?
It is a subsequent debit and it has two items with two different tax codes. I want to enter the subsequent debit for a PO with many items and enter the value of the whole subsequent invoice. So there is the need to enter one line item with two tax codes.
How can this be done?
Thank you?

10g - how to configure sso with iis-

hi, experts, I have followed Oracle® Business Intelligence Enterprise Edition Deployment Guide to configure SSO with IIS.
but I always meet this message.
Not Logged In
You are not currently logged in to the Oracle BI Server.
If you have already logged in, your connection might have timed out, or a communications or server error may have occurred
what steps are missing?
how to check?

hi, experts,
I checked C:\OracleBIData\web\log\sawlog0.log on the obi server (windows server 2003 standard).
at Thu Feb 17 14:48:46 2011 , I logined OBI on another machine (not via the browser on the obi server).
however, the log shows the login user is the administrator of the obiserver (obiserver\administrator ).
any setup on IIS are wrong? thank you very much!
=========================================================================================
Running job 'MinutelyMonitor' took 7422 milliseconds, 12.3% of job's frequency (60 seconds).
Type: Error
Severity: 40
Time: Thu Feb 17 14:48:46 2011
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
Properties: ConnId-1,1;ThreadID-1796
Location:
     saw.odbc.connection.open
     saw.connectionPool.getConnection
     saw.subsystem.security.checkAuthenticationImpl
     saw.threadPool
     saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43001] Authentication failed for obiserver\administrator in repository Star: invalid user/password. (08004)
Type: Error
Severity: 42
Time: Thu Feb 17 14:48:46 2011
File: project/webconnect/connection.cpp Line: 276
Properties: ThreadID-1796
Location:
     saw.connectionPool.getConnection
     saw.subsystem.security.checkAuthenticationImpl
     saw.threadPool
     saw.threads
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
---------------------------------------

How to configure sync with my local ftp server?

I have used XMarks since now because it hallow me to synchronize my bookmarks with my local server. Now XMarks don't work anymore because it's not more possible to synchronize the passwords.
Any other alternative imposes to use an external server and I don't want to use an external server. My data must remain on my machine it's absolutely excluded that i use an external unknown server for this.
The only solution must be a free solution (a real free solution) and the firefox synchronization seems to me the best/only one.
But I've not found how to configure it to use my own server.
So how to do it, where are the options to the synchronizer to give my own ftp server or whatever other server it needs?

iAS 6.0 sp4 officially does only support iPlanet Directory Server 5.0 sp1 and 4.13.
For more details visit: http://docs.iplanet.com/docs/manuals/ias/60/sp4/ig/prep.htm#42084
I guess, you can specify the directory server during the time of installation.
Thanks,
Rakesh.

How to process reports with two different date fields

Morning all,
This question is somewhat similar to what I asked few days back. I created two different reports for two different departments (Credit Control and Free of Charge Control).
These two reports pull data from two different date fields and has different status check ups.
Few days back my director requested me if he can have both reports in one report. That is when I asked question from all of you regarding two reports.
Anyhow, that was created by implementing two sub reports however, the director asked me to combine the two different reports into one in such a way that the output records should be added up with each other hence one single report with all combined data of Credit Control and Free of Charges (not two sub reports in one report).
The problem here which I am getting is that, both reports uses two different date fields. I can live with two different statuses as that can be easily done within formula/RT however how to create a report with Report Selection Formula condition which looks in both date fields and produces results accordingly?
I have tried this by not putting any condition in report selection formula and ran the report, it produced total results from past 6 years.
Any ideas how to produce combined report which has two different date fields?
Many thanks in advance
Regards
Jehanzeb
What I

Charliy,
No the both dates are from two different databases, tables and fields. The Credit date field is from KLAB database under max table where as the FOC date field is from SAE database under maxmast table. Klab date is under credit2 table where as foc date is under order header table.
So its more like this:
Klab->Max-Credit2--->Credit_date
Sae->Maxmast->Order_header---Date entered.
two dates totally different tables, dbs
however, I will try your idea too and see if that works.
Regards
Jehanzeb

How to configure network with just 1 ethernet adapter?

I was looking for a guide which would talk about how to configure your network in case if you have only 1 Ethernet adapter. Is it mandatory to have more than 1 network card to configure multiple ports? If not, what are the options available to deploy a Virtual Machine that can have applications which are available over the network. I don't have a separate network i.e. public network as well as management network is of same IP range.
I am having 2 node cluster using NFS for pools as well as repository.
~Yagnesh

yagneshg wrote:
I was looking for a guide which would talk about how to configure your network in case if you have only 1 Ethernet adapter. Just enable the "Virtual Machine" role on the Management network that is automatically connected. You will then be able to add guest vNICs to the same network.
I am having 2 node cluster using NFS for pools as well as repository. I strongly recommend you get at least one more physical NIC for your server, if not two: running NFS and the cluster heartbeat and the guest traffic all over the same network is going to put a lot of data down the wire and you may land up in a situation where the cluster traffic is overwhelmed and a node reboots. You need to be very careful in this situation. Network cards are cheap and you should have at least two or three, I reckon.

How to using ical with two separate iphones

hello
trying to understand and learn how to use Ical with 2 different Iphones, using Icloud.

To sync iCal across computers, the calendar needs to be published to a server. This can be a local server that you can set up, or it can be something like google or microsoft exchange or apple's mobile me. The best bet may be to wait until fall and see what iCloud offers!
Sharing your screen can be accomplished a few different ways. You can have two iChat accounts set up, and have one logged in on each computer, and then use iChat's screen share feature. The other way is to go to System Preferences, Sharing, and then check the box next to Screen Sharing. You may have to adjust some of the settings in there, but give that a shot.

How to manage itunes with two ipods

I have two iPods, a 60G photo and a 30G video. I have two macs, one at work, the other at home. My iTunes on the work computer has about 50G of music, and about 15G on my home computer. Until now, I have only synced the big iPod with the work computer and small iPod at home. I just got a very big external drive, and want to keep everything there. That raises several questions I thought someone here might know how to answer.
1) Where are the files so I can just copy them onto the ext hard drive? (I can probably find this for myself, but with my computer skills on mac, it will be frustrating, I imagine. Since I have the other questions, I thought htis one might be easy.)
2) How can I merge the two files? I know I have some duplicates, adn I know how to get rid of them once the two are merged, but how do the two files merge together in one iTunes file on my new hard drive?
3) Once the two are merged, can I set it so that certain types of music are put on one iPod, and other types on the other?
Thanks a lot, in advance.
Brad

1. Click on the folder in the Finder's sidebar with the house icon, and then open the folder named Music. The iTunes folder inside is the default location of the music library; if the songs aren't here, follow these instructions to locate them.
2. Drag the files into the Library section of the open iTunes application.
3. Use the option in this article which best fits your needs.
(22256)

How to configure css with two redudant L2 switches

Similar Messages

Maybe you are looking for