How to configure CVC automation process using SNP master data and BI customer master data

Hi Gurus,
How to configure CVC automation in MPOS structure technically, using SNP master data in CVC creation such as Product and location details
and in parallel extract date from ECC to BI customer master data in DP. Where-in a APO BI cube should have only new combinations which are to be validated with ECC and existing combinations in the MPOS structure before creation of CVC in different regions of MPOS.
Second the automation should also check certain validations of product, location and are part of SNP-ECC master data and are these new combinations.
Could someone guide us in this process.
Thanks
Kumar

Praveen,
The short answer is to move the data into infoproviders or flat files for all of the 'characteristic-type' source data; and then copy CVCs from the infoproviders into the Planning area, probably using one or more Process Chains (program /SAPAPO/TS_PLOB_MAINTAIN).
The long answer is that this is not a trivial undertaking; this could end up being a pretty involved solution. If you do not have enough BW/DP expertise available locally to create this solution for you, then I recommend you consider engaging external resources to assist you. I personally wouldn't even consider starting to work on such a solution without first knowing a lot more about the detailed business requirements, and about any existing solutions that may already in place. An SCN forum is not really suitable for such an answer. In my opinion, the BBP doc alone would be 20+ pages, assuming no enhancements..
Best Regards,
DB49

Similar Messages

How to Configure alert for process failures

Hi Friends.
How to Configure alert for process failures due to any reasons like mapping, runtime exceptions .
I am devloping one scenario which is file to flatfile. In this scenario I am also using mail adapter for sending mail daily to admin that tells about record size and no of records parallely. I am not using BPM in this scenario.
I am having very little experience in XI.
Please answer this with clear steps so that I can do it.

hi,
check the links below for all the details and help on configuring alerts
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9418d690-0201-0010-85bb-e9b2c1af895b - How to setup alerts for monitoring in XI 3.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/003de490-0201-0010-68a4-bf7a1e1fd3a5 - Monitoring in XI 3.0
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - XI: Alerts configuration - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - XI: Alerts - Troubleshooting guide
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi

Dynamic configuration in integration process using abap mapping

Hi everybody,
i have the following scenario:
file adapter -> integration process -> file adapter
The integration process uses an ABAP mapping and sets the filename in dynamic configuration as follows:
*-- Set Parameter
    clear ls_dyn_record.
    ls_dyn_record-name      = gc_dyn_config_name.
    ls_dyn_record-namespace = gc_dyn_config_ns.
    ls_dyn_record-value     = <new_file_name>
*-- Write configuration
    ir_dyn_config->add_record( ls_dyn_record ).
But now the new filename is not reflected in the file adapter (receiver). In the integration monitor (SXMB_MONI) i still find the old filename.
Whats wrong?
Elko

The ABAP mapping is more complex, setting filename in Dyn. Conf. is just one step in mapping.
If I check the Workflow protocol of the Integration Process, I find the following in the Trace of the ABAP-Mapping:
The filename has been set to 3233340.SWNF00HW.P10I. The Suffix P10I has been added in the ABAP mapping.
When I check the subsequent message in SXMB_MONI I find:
The added suffix is missing in the filename !!
Elko

How to configure a status process

I would like to configure a control process using a percentage bar for a VI

Hello Novice Programmeur,
The file that I sent to you, is a ".LLB" file : It allows to save all VIs, objects and external subroutines, excluding those in the folder vi.lib, to a library. It allows to save a hierarchy of VIs (Main VI and SubVIs) in one file. This kind of file can be open by LabVIEW.
You will found in the attached zip file the same program with the main VI and SubVIs. Launch and execute the VI "ProgressBarExample".
Best Regards,
Sanaa TAZI
National Instruments France
Sanaa T.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> http://www.nidays.fr/images/081110_ban_nidays09_468X60.gif
Attachments:
test.zip ‏54 KB

How to configure advance payment process in sd and fi

hi,
sap gurus,
how to configure advance payment process in sd an fi
how it will trigger from sd and fi.
and the accounting entries is also needed
plz help me on this
regrds,
balaji.t
09990019711

Hi
As far as my knowledge goes, this has lot to do with FI configuration for Down payments.
Regards
Aravind
Assign points if useful

How to find which datasource are using tables AFRU ,CAUFV and AUFM

*how to find which datasource are using tables AFRU ,CAUFV and AUFM*

Hi,
You can enter your table names in SE11 transaction and click "Display" and again click "Where -Used-List". Then it will show all the places where these tables are used(Datasources)
Hope this helps.....
Regards,
SUman

Creating Process Orders Without a Material and Without a Master Recipe

Hi PP experts, anyone knows if it is possible and how to do create Process Orders Without a Material and Without a Master Recipe?
Thanks!!

Dear,
If you want to use a cleanout recipe
T code CORO
create a order w/o material for rework qty
Make the same entries as described under Creating a Process Order With a Material. Use OPJG config to have a default operation defined for the plant and order type combination.
Please find the required details and conditions for creating process orders without master recipe.
http://help.sap.com/saphelp_47x200/helpdata/en/89/a42cb3461e11d182b50000e829fbfe/frameset.htm
Regards,
R.Brahmankar
Edited by: R Brahmankar on Oct 13, 2008 5:12 PM

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
Thanks for any suggestions.

I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
Now I am back on my Mac. I meant the following: Batch Change the date for a large range of photos, that should have a date stepped in increments.
Select all Photos at once and use the command "Photos > Batch Change".
Then set the date for the first photo and select an increment, e.g. one minute.
Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date. This way it will be unnecessary to change the titles or filenames.

How to initaiate a ALBPM Process using Email

Hi,
I'm very new to this ALBPM.
I have 2 quries for now.
* Can I initiate a process on receiving a mail to the mailbox.(SMTP Configured Inbox)
Like the way we send reminder mails to the SMTP configured mail box, Is it possible to initaiate a process automatically when that configured mail box receives a particular mail??
* How to generate the reports for a Process Instance. \\ \\ I want to track the status of a particular process under execution \\ i.e, wanted to generate a report taking status of the process at each \\ stage.
My requirement : we have process for creating a customer code.
Process flow will have these states : receives requests -
rejects/proceeds (we will review it if it incompletes sends back to
customer or proceeds with creation) - updating/approvals / escalations - end.So I need to generate the report with the following:how many requests came in a day,how many are requests are created successfully, how many requests have been rejected,how many are escalated.
Exactly I have the report of a request at what stage.it is
like rejected/approval pending/created....
At every stage I have to track the process and
need to generate a report
Can anyone please guide me in this as early as possible.
Regards
~Kavitha...
Edited by: user10230886 on Sep 9, 2008 4:28 AM

Kavitha
1. You may want to check that in what format you will be getting an email. You may have to use com object as usually info in email is sent in a VB form. If the email will be sent to you in an xml formt ( i assume that some engg group in between will convert the email for you in agreed format and transfer only required data to you).
You can use Global Automatic activity to listen from mail server and on basis of that initiate a instance in the albpm process by generating arguments and mapping arguments to instance variable.
MailServer mailServer = Fuego.Net.MailServer(protocol: mailIncomingProtocol,
host: mailIncomingServer,
user: mailIncomingUsername,
passwd: mailIncomingUserPassword,
folder: "INBOX",
leaveMessages: true);
foreach (message in mailServer.messages) {
logMessage("Subject: " + message.subject + "; Message: " + message.message);
String subject = message.subject;
String theRequestID = subject.substring(subject.indexOf("(") + 1, subject.indexOf(")"));
String firstLineOfMessage = message.message.substring(0, message.message.indexOf("\n"));
logMessage("FirstLine: " + firstLineOfMessage);
mailServer.removeMail(mail: message);
Hope this will give you a good start.
Also, for reporting, you can use BAM. Their are default dashboards which one can generate which show the workload.
Thanks, Vikas

Supply chain modeling of subcontraction process using SNP

Dear Experts,
I am in the phase of designing my supply chain business process in APO
We have two plants
Plant u2013 A (manufacturing )
Plant u2013 B (distribution center)
Subcontractors - for Plant A
Subcon-1
Subcon-2
Subcon-3
Subcon-4
Subcon-5
Subcon-6
Subcon-7
Demand planning /forecast is done on the basis of
Customer
Products
And Plant
When forecast is done in demand planning an send to SNP , system must give planned order on the basis of available capacity , low cost of production of the my subcontractor ,I believe I need to use SNP optimization
Does SNP Optimizer can serve my requirement
Also how do I need to define my subcontractor either as DC location or just a MRP area
Please do not hesitate to ask more details if you are not clear my requirement
Thanks & Regard
Raj

Hi Raju,
The Optimizer should serve your requirement as it considers the capacity constraints and can be used for finite planning. Regarding subcontracting location , you can map it as either a DC location or a Subcontractor location. Better way would be to map it as a subcontracting location. Mapping it as just MRP area would not serve as you want it to consider during the finite planning runs for optimizer.
Let me know if it helps
Regards
Gaurav Mathur

How to configure ADF application to use OAM Identity Assertion ? web.xml

We have a web application developed using ADF (application development framework) and deployed on WebCenter 11.1.1.2 (weblogic 10.3.2)
OID Authentication and OAM identity assertion is configured in WebLogic 10.3.2 .
How to configure security in ADF application (web.xml or weblogic.xml) so that it uses OAM identity assertion (already configured as authentication providers in weblogic server)
Any pointers or documentation so that application (developed using ADF) check for identity tocken and verifies it with one of identity assertion providers.

John,
I have to concur. With OAM you don't need this. OAM intercepts the calls and inserts a cookie for WLS to get user information from.
I strongly advise to go through the above mention OFM Security Guide. Esp. Chapter 10 tells you in every detail how to implement OAM SSO with WLS (with or without OHS as a proxy).
Reading this chapter saves you time and turnarounds on this topic...
--olaf

How to configure JMS-Server to use username and password

Hi
Maybe this is a real stupid question, but please help me, I'm not very experienced using JMS:
I'm using JMS (provided by OC4J / Application Server 10.1.3). I configured a ConnectionFactory (without username and password) and a Queue and there is also a application, which successfully opens the JMS-Connections.
This works well as long as I do not provide a username und password in the ConnectionFactory (EnterpriseManager: OC4J/Admin/Services/JMS-provider...). If I do this, my application terminates with the following stacktrace:
javax.jms.JMSSecurityException: JMSServer[aplora2:12602]: failed to authenticate "myuser/mypassword", no such user.
     at com.evermind.server.jms.JMSUtils.make(JMSUtils.java:1034)
     at com.evermind.server.jms.JMSUtils.toJMSSecurityException(JMSUtils.java:1090)
     at com.evermind.server.jms.JMSServer.getJMSServer(JMSServer.java:1237)
     at com.evermind.server.jms.JMSServer.getJMSServer(JMSServer.java:1213)
     at com.evermind.server.jms.InContainerProxy.getJMSServer(InContainerProxy.java:93)
     at com.evermind.server.jms.EvermindConnection.<init>(EvermindConnection.java:103)
     at com.evermind.server.jms.EvermindQueueConnection.<init>(EvermindQueueConnection.java:62)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.unprivileged_createQueueConnection(EvermindQueueConnectionFactory.java:98)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.access$000(EvermindQueueConnectionFactory.java:42)
     at com.evermind.server.jms.EvermindQueueConnectionFactory$1.execute(EvermindQueueConnectionFactory.java:78)
     at com.evermind.server.jms.InContainerProxy.doSecureOp(InContainerProxy.java:157)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.createQueueConnection(EvermindQueueConnectionFactory.java:75)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.createQueueConnection(EvermindQueueConnectionFactory.java:66)
     at sam.model.messages.MessageManager.<init>(MessageManager.java:74)
where "myuser" and "mypassword" are the username and password I entered in the ConnectionFactory. (My Application certainly uses the same username and password)
I expected, that by entering username and password here I would configure my Queue to be protected by them. But obviously there are some very basic things I didn't understand. Can anyone give me a hint, how I can protect the (OC4J-) JMS-Server or the Queue by username and password?
Thanks for your help
Frank Brandstetter

Hey Frank -
Assuming you've set up users in the "Security Manager" for your application, you can specify what JNDI resources they can "read" (and thus also connect to) via the orion-application.xml file. Look at the following snippet from the orion-application.xml file:
     <namespace-access>
<read-access>
<namespace-resource root="jms/firstQueue">
<security-role-mapping impliesAll="false" name="jmsSecurity">
<user name="scooter"/>
</security-role-mapping>
</namespace-resource>
</read-access>
<read-access>
<namespace-resource root="delme">
<security-role-mapping impliesAll="false" name="jmsSecurity">
<group name="messagingUsers"/>
</security-role-mapping>
</namespace-resource>
</read-access>
</namespace-access>
This would say that only the user "scooter" that you've set up would have access to the Queue whose JNDI name begins with jms/firstQueue. Anyone you've set up and added to a messagingUsers group would have access to any Queues whose JNDI name begins with "delme". (I'm honestly not sure what exactly this line does: <security-role-mapping impliesAll="false" name="jmsSecurity">)
This is the only way I've found to limit access to a particular Queue.
HTH.
Scott

How to configure webcenter services to use external LDAP?

Reassociating the identity store with an external LDAP server is mandatory only if you're using the Documents service and/or the Discussions service, in which case the WC_Spaces server, Content Server, and Collaboration server must all be configured to use the same external LDAP server.
The question is how to configure?
Is there any document which details this?
Please help! this is urgent.
Regards

Refer
http://docs.oracle.com/cd/E28280_01/webcenter.1111/e12405/wcadm_security_id_store.htm#WCADM1845
http://docs.oracle.com/cd/E28280_01/webcenter.1111/e12405/wcadm_security_id_store.htm#WCADM345
Thanks

How to configure FTP in Process Flow

I'm having troubles configuring an FTP activity in my process flow. Any clue how that should be done?
The documentation does not tell that much. I added the following to my parameter list in "Activity Panel"
/${Working.Host}=100.1.15.236/${Working.User}=XYZ/${Working.Password}=xxxxx/${Working.Rootpath}=C:\Nova\Data/${Remote.Host}=192.168.100.100/${Remote.User}=oracle/${Remote.Password}=xxxxx/${Remote.RootPath}=/export/home/oracle/
where "/" is the variable delimiter. The deployment went successfully, but when I try to execute, it hangs at the FTP activity and generate an error when cancelled.
Any help will be appreciated
Thanks,
Rene

URGENT!!!
i have included FTP activity in my process flow, i can able to FTP the file to the remote server.
I have two transitions and point to two end processes, one is end-success and the other one is end-error. But even if the FTP process completed and file have been successfully send to the remote server, still the process ends with End-Error.
If the FTP activity couldnt able to send the file due to some other reason still the process ends with the end-error.
Can any one give me some clues.

How to configure RAID 5 sys using SAS controller for APP CS4

Hi I would like to know how to configure my 3 HardDrives (600GB each) on RAID 5 connected to SAS controller to work smoothly with PremierePro CS4. Mainly to store scratch disk, and all preview files, etc.. At present it shows as one big hard drive in C:\ It shows as follows: OS(C 0.98 TB free of 1.08TB I would like to have at least one HDD out of 3 to store my scratch disk files and preview files... I have installed only CS4 Master Collection + Windows 7 64bit Ultimate as OS in this machine. Following is my system configuration: Intel Xeon E5620, 2.4GHz processor/12M Cache, 5.86GT/S, QPI, Turbo, HT, 4C Intel 5520 Chipset 12GB DDR3 RDIMM Memory,1333MHz, ECC Three 600GB (15000rpm) SAS HardDrives Perc6/i SAS/SATA Harware RAID card All SAS Drives, RAID 5, 3 drive configuration BlueRayBurner1GB PCIe X16 nVidia Quadro FX3800 ,Dual monitor DP+1 DVI Capable I am in a little bit strife on this. I am in a little bit strife on this and Open for any good and effective suggestions are much appreciated. Thanks Nathapushpa

You even have three more connectors free on your Perc controller, so you could add three more disks, without using any motherboard connectors.
I think you have two alternative approaches:
1. Add a smallish disk as a boot disk, i.e. a 150 GB Velociraptor and install OS and programs there and let your raid5 exist as it is, or
2. Add another 600 GB to your raid5 to make it a four disk array.
Of course you could also do both. Breaking the raid out to individual disks means that all data on the current raid will be lost, unless you have a backup available, but it will still mean a fresh install of OS & programs, so remember to deactivate Adobe before you do anything to your disk setup like in alternative 1 or breaking out the array.

How to configure CVC automation process using SNP master data and BI customer master data

Similar Messages

Maybe you are looking for